ADRDY

Bit 0: ADC ready.

Allowed values:
0: NotReady: ADC is not ready to start conversion
1: Ready: ADC is ready to start conversion

EOSMP

Bit 1: End of sampling flag.

Allowed values:
0: NotEnded: End of sampling phase no yet reached
1: Ended: End of sampling phase reached

EOC

Bit 2: End of conversion flag.

Allowed values:
0: NotComplete: Regular conversion is not complete
1: Complete: Regular conversion complete

EOS

Bit 3: End of regular sequence flag.

Allowed values:
0: NotComplete: Regular sequence is not complete
1: Complete: Regular sequence complete

OVR

Bit 4: ADC overrun.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

JEOC

Bit 5: Injected channel end of conversion flag.

Allowed values:
0: NotComplete: Injected conversion is not complete
1: Complete: Injected conversion complete

JEOS

Bit 6: Injected channel end of sequence flag.

Allowed values:
0: NotComplete: Injected sequence is not complete
1: Complete: Injected sequence complete

AWD[1]

Bit 7: Analog watchdog 1 flag.

Allowed values:
0: NoEvent: No analog watchdog event occurred
1: Event: Analog watchdog event occurred

AWD[2]

Bit 8: Analog watchdog 2 flag.

Allowed values:
0: NoEvent: No analog watchdog event occurred
1: Event: Analog watchdog event occurred

AWD[3]

Bit 9: Analog watchdog 3 flag.

Allowed values:
0: NoEvent: No analog watchdog event occurred
1: Event: Analog watchdog event occurred

JQOVF

Bit 10: Injected context queue overflow.

Allowed values:
0: NoOverflow: No injected context queue overflow has occurred
1: Overflow: Injected context queue overflow has occurred

ADRDYIE

Bit 0: ADC ready interrupt enable.

Allowed values:
0: Disabled: ADC ready interrupt disabled
1: Enabled: ADC ready interrupt enabled

EOSMPIE

Bit 1: End of sampling flag interrupt enable for regular conversions.

Allowed values:
0: Disabled: End of regular conversion sampling phase interrupt disabled
1: Enabled: End of regular conversion sampling phase interrupt enabled

EOCIE

Bit 2: End of regular conversion interrupt enable.

Allowed values:
0: Disabled: End of regular conversion interrupt disabled
1: Enabled: End of regular conversion interrupt enabled

EOSIE

Bit 3: End of regular sequence of conversions interrupt enable.

Allowed values:
0: Disabled: End of regular sequence interrupt disabled
1: Enabled: End of regular sequence interrupt enabled

OVRIE

Bit 4: Overrun interrupt enable.

Allowed values:
0: Disabled: Overrun interrupt disabled
1: Enabled: Overrun interrupt enabled

JEOCIE

Bit 5: End of injected conversion interrupt enable.

Allowed values:
0: Disabled: End of injected conversion interrupt disabled
1: Enabled: End of injected conversion interrupt enabled

JEOSIE

Bit 6: End of injected sequence of conversions interrupt enable.

Allowed values:
0: Disabled: End of injected sequence interrupt disabled
1: Enabled: End of injected sequence interrupt enabled

AWD[1]IE

Bit 7: Analog watchdog 1 interrupt enable.

Allowed values:
0: Disabled: Analog watchdog interrupt disabled
1: Enabled: Analog watchdog interrupt enabled

AWD[2]IE

Bit 8: Analog watchdog 2 interrupt enable.

Allowed values:
0: Disabled: Analog watchdog interrupt disabled
1: Enabled: Analog watchdog interrupt enabled

AWD[3]IE

Bit 9: Analog watchdog 3 interrupt enable.

Allowed values:
0: Disabled: Analog watchdog interrupt disabled
1: Enabled: Analog watchdog interrupt enabled

JQOVFIE

Bit 10: Injected context queue overflow interrupt enable.

Allowed values:
0: Disabled: Injected context queue overflow interrupt disabled
1: Enabled: Injected context queue overflow interrupt enabled

ADEN

Bit 0: ADC enable control.

Allowed values:
0: Disabled: ADC disabled
1: Enabled: ADC enabled

ADDIS

Bit 1: ADC disable command.

Allowed values:
0: NotDisabling: No disable command active
1: Disabling: ADC disabling

ADSTART

Bit 2: ADC start of regular conversion.

Allowed values:
0: NotActive: No conversion ongoing
1: Active: ADC operating and may be converting

JADSTART

Bit 3: ADC start of injected conversion.

Allowed values:
0: NotActive: No conversion ongoing
1: Active: ADC operating and may be converting

ADSTP

Bit 4: ADC stop of regular conversion command.

Allowed values:
0: NotStopping: No stop command active
1: Stopping: ADC stopping conversion

JADSTP

Bit 5: ADC stop of injected conversion command.

Allowed values:
0: NotStopping: No stop command active
1: Stopping: ADC stopping conversion

ADVREGEN

Bit 28: ADC voltage regulator enable.

Allowed values:
0: Disabled: ADC voltage regulator disabled
1: Enabled: ADC voltage regulator enabled

DEEPPWD

Bit 29: Deep-power-down enable.

Allowed values:
0: Disabled: ADC not in Deep-power down
1: Enabled: ADC in Deep-power-down (default reset state)

ADCALDIF

Bit 30: Differential mode for calibration.

Allowed values:
0: SingleEnded: Calibration for single-ended mode
1: Differential: Calibration for differential mode

ADCAL

Bit 31: ADC calibration.

Allowed values:
0: NotCalibrating: ADC calibration either not yet performed or completed
1: Calibrating: ADC calibration in progress

DMAEN

Bit 0: Direct memory access enable.

Allowed values:
0: Disabled: DMA disabled
1: Enabled: DMA enabled

DMACFG

Bit 1: Direct memory access configuration.

Allowed values:
0: OneShot: DMA One Shot Mode selected
1: Circular: DMA circular mode selected

RES

Bits 3-4: Data resolution.

Allowed values:
0: Bits12: 12-bit
1: Bits10: 10-bit
2: Bits8: 8-bit
3: Bits6: 6-bit

EXTSEL

Bits 5-9: External trigger selection for regular group.

Allowed values:
0: TIM1_CC1: Timer 1 CC1 event
1: TIM1_CC2: Timer 1 CC2 event
2: TIM1_CC3: Timer 1 CC3 event
3: TIM2_CC2: Timer 2 CC2 event
4: TIM3_TRGO: Timer 3 TRGO event
6: EXTI11: EXTI line 11
7: HRTIM_ADCTRG1: HRTIM_ADCTRG1 event
8: HRTIM_ADCTRG3: HRTIM_ADCTRG3 event
9: TIM1_TRGO: Timer 1 TRGO event
10: TIM1_TRGO2: Timer 1 TRGO2 event
11: TIM2_TRGO: Timer 2 TRGO event
13: TIM6_TRGO: Timer 6 TRGO event
14: TIM15_TRGO: Timer 15 TRGO event
15: TIM3_CC4: Timer 3 CC4 event

EXTEN

Bits 10-11: External trigger enable and polarity selection for regular channels.

Allowed values:
0: Disabled: Trigger detection disabled
1: RisingEdge: Trigger detection on the rising edge
2: FallingEdge: Trigger detection on the falling edge
3: BothEdges: Trigger detection on both the rising and falling edges

OVRMOD

Bit 12: Overrun mode.

Allowed values:
0: Preserve: Preserve DR register when an overrun is detected
1: Overwrite: Overwrite DR register when an overrun is detected

CONT

Bit 13: Single / continuous conversion mode for regular conversions.

Allowed values:
0: Single: Single conversion mode
1: Continuous: Continuous conversion mode

AUTDLY

Bit 14: Delayed conversion mode.

Allowed values:
0: Off: Auto delayed conversion mode off
1: On: Auto delayed conversion mode on

ALIGN

Bit 15: Data alignment.

Allowed values:
0: Right: Right alignment
1: Left: Left alignment

DISCEN

Bit 16: Discontinuous mode for regular channels.

Allowed values:
0: Disabled: Discontinuous mode on regular channels disabled
1: Enabled: Discontinuous mode on regular channels enabled

DISCNUM

Bits 17-19: Discontinuous mode channel count.

Allowed values: 0x0-0x7

JDISCEN

Bit 20: Discontinuous mode on injected channels.

Allowed values:
0: Disabled: Discontinuous mode on injected channels disabled
1: Enabled: Discontinuous mode on injected channels enabled

JQM

Bit 21: JSQR queue mode.

Allowed values:
0: Mode0: JSQR Mode 0: Queue maintains the last written configuration into JSQR
1: Mode1: JSQR Mode 1: An empty queue disables software and hardware triggers of the injected sequence

AWD1SGL

Bit 22: Enable the watchdog 1 on a single channel or on all channels.

Allowed values:
0: All: Analog watchdog 1 enabled on all channels
1: Single: Analog watchdog 1 enabled on single channel selected in AWD1CH

AWD1EN

Bit 23: Analog watchdog 1 enable on regular channels.

Allowed values:
0: Disabled: Analog watchdog 1 disabled on regular channels
1: Enabled: Analog watchdog 1 enabled on regular channels

JAWD1EN

Bit 24: Analog watchdog 1 enable on injected channels.

Allowed values:
0: Disabled: Analog watchdog 1 disabled on injected channels
1: Enabled: Analog watchdog 1 enabled on injected channels

JAUTO

Bit 25: Automatic injected group conversion.

Allowed values:
0: Disabled: Automatic injected group conversion disabled
1: Enabled: Automatic injected group conversion enabled

AWD1CH

Bits 26-30: Analog watchdog 1 channel selection.

JQDIS

Bit 31: Injected Queue disable.

Allowed values:
0: Enabled: Injected Queue enabled
1: Disabled: Injected Queue disabled

ROVSE

Bit 0: Regular Oversampling Enable.

Allowed values:
0: Disabled: Regular oversampling disabled
1: Enabled: Regular oversampling enabled

JOVSE

Bit 1: Injected Oversampling Enable.

Allowed values:
0: Disabled: Injected oversampling disabled
1: Enabled: Injected oversampling enabled

OVSR

Bits 2-4: Oversampling ratio.

Allowed values:
0: OS2: Oversampling ratio of 2
1: OS4: Oversampling ratio of 4
2: OS8: Oversampling ratio of 8
3: OS16: Oversampling ratio of 16
4: OS32: Oversampling ratio of 32
5: OS64: Oversampling ratio of 64
6: OS128: Oversampling ratio of 128
7: OS256: Oversampling ratio of 256

OVSS

Bits 5-8: Oversampling shift.

Allowed values:
0: NoShift: No right shift applied to oversampling result
1: Shift1: Shift oversampling result right by 1 bit
2: Shift2: Shift oversampling result right by 2 bits
3: Shift3: Shift oversampling result right by 3 bits
4: Shift4: Shift oversampling result right by 4 bits
5: Shift5: Shift oversampling result right by 5 bits
6: Shift6: Shift oversampling result right by 6 bits
7: Shift7: Shift oversampling result right by 7 bits
8: Shift8: Shift oversampling result right by 8 bits

TROVS

Bit 9: Triggered Regular Oversampling.

Allowed values:
0: Automatic: All oversampled conversions for a channel are run following a trigger
1: Triggered: Each oversampled conversion for a channel needs a new trigger

ROVSM

Bit 10: Regular Oversampling mode.

Allowed values:
0: Continued: Oversampling is temporary stopped and continued after injection sequence
1: Resumed: Oversampling is aborted and resumed from start after injection sequence

GCOMP

Bit 16: Gain compensation mode.

Allowed values:
0: Disabled: Regular ADC operating mode
1: Enabled: Gain compensation enabled and applies to all channels

SWTRIG

Bit 25: Software trigger bit for sampling time control trigger mode.

Allowed values:
0: Disabled: End sampling period and start conversion
1: Enabled: Start sampling period

BULB

Bit 26: Bulb sampling mode.

Allowed values:
0: Disabled: Bulb sampling mode disabled
1: Enabled: Bulb sampling mode enabled. Immediately start sampling after last conversion finishes.

SMPTRIG

Bit 27: Sampling time control trigger mode.

Allowed values:
0: Disabled: Sampling time control trigger mode disabled
1: Enabled: Sampling time control trigger mode enabled

SMP[0]

Bits 0-2: Channel 0 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

SMP[1]

Bits 3-5: Channel 1 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

SMP[2]

Bits 6-8: Channel 2 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

SMP[3]

Bits 9-11: Channel 3 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

SMP[4]

Bits 12-14: Channel 4 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

SMP[5]

Bits 15-17: Channel 5 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

SMP[6]

Bits 18-20: Channel 6 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

SMP[7]

Bits 21-23: Channel 7 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

SMP[8]

Bits 24-26: Channel 8 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

SMP[9]

Bits 27-29: Channel 9 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

SMPPLUS

Bit 31: Addition of one clock cycle to the sampling time.

Allowed values:
0: KeepCycles: The sampling time remains set to 2.5 ADC clock cycles remains
1: Add1Cycle: 2.5 ADC clock cycle sampling time becomes 3.5 ADC clock cycles for the ADC_SMPR1 and ADC_SMPR2 registers

SMP[10]

Bits 0-2: Channel 10 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

SMP[11]

Bits 3-5: Channel 11 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

SMP[12]

Bits 6-8: Channel 12 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

SMP[13]

Bits 9-11: Channel 13 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

SMP[14]

Bits 12-14: Channel 14 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

SMP[15]

Bits 15-17: Channel 15 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

SMP[16]

Bits 18-20: Channel 16 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

SMP[17]

Bits 21-23: Channel 17 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

SMP[18]

Bits 24-26: Channel 18 sample time selection.

Allowed values:
0: Cycles2_5: 2.5 ADC clock cycles
1: Cycles6_5: 6.5 ADC clock cycles
2: Cycles12_5: 12.5 ADC clock cycles
3: Cycles24_5: 24.5 ADC clock cycles
4: Cycles47_5: 47.5 ADC clock cycles
5: Cycles92_5: 92.5 ADC clock cycles
6: Cycles247_5: 247.5 ADC clock cycles
7: Cycles640_5: 640.5 ADC clock cycles

LT1

Bits 0-11: Analog watchdog 1 lower threshold.

Allowed values: 0x0-0xfff

AWDFILT

Bits 12-14: Analog watchdog filtering parameter.

HT1

Bits 16-27: Analog watchdog 1 higher threshold.

Allowed values: 0x0-0xfff

LT2

Bits 0-7: Analog watchdog 2 lower threshold.

Allowed values: 0x0-0xff

HT2

Bits 16-23: Analog watchdog 2 higher threshold.

Allowed values: 0x0-0xff

LT3

Bits 0-7: Analog watchdog 3 lower threshold.

Allowed values: 0x0-0xff

HT3

Bits 16-23: Analog watchdog 3 higher threshold.

Allowed values: 0x0-0xff

L

Bits 0-3: Regular channel sequence length.

Allowed values: 0x0-0xf

SQ[1]

Bits 6-10: 1 conversion in regular sequence.

Allowed values: 0x0-0x12

SQ[2]

Bits 12-16: 2 conversion in regular sequence.

Allowed values: 0x0-0x12

SQ[3]

Bits 18-22: 3 conversion in regular sequence.

Allowed values: 0x0-0x12

SQ[4]

Bits 24-28: 4 conversion in regular sequence.

Allowed values: 0x0-0x12

SQ[5]

Bits 0-4: 5 conversion in regular sequence.

Allowed values: 0x0-0x12

SQ[6]

Bits 6-10: 6 conversion in regular sequence.

Allowed values: 0x0-0x12

SQ[7]

Bits 12-16: 7 conversion in regular sequence.

Allowed values: 0x0-0x12

SQ[8]

Bits 18-22: 8 conversion in regular sequence.

Allowed values: 0x0-0x12

SQ[9]

Bits 24-28: 9 conversion in regular sequence.

Allowed values: 0x0-0x12

SQ[10]

Bits 0-4: 10 conversion in regular sequence.

Allowed values: 0x0-0x12

SQ[11]

Bits 6-10: 11 conversion in regular sequence.

Allowed values: 0x0-0x12

SQ[12]

Bits 12-16: 12 conversion in regular sequence.

Allowed values: 0x0-0x12

SQ[13]

Bits 18-22: 13 conversion in regular sequence.

Allowed values: 0x0-0x12

SQ[14]

Bits 24-28: 14 conversion in regular sequence.

Allowed values: 0x0-0x12

SQ[15]

Bits 0-4: 15 conversion in regular sequence.

Allowed values: 0x0-0x12

SQ[16]

Bits 6-10: 16 conversion in regular sequence.

Allowed values: 0x0-0x12

RDATA

Bits 0-15: Regular Data converted.

JL

Bits 0-1: Injected channel sequence length.

Allowed values: 0x0-0x3

JEXTSEL

Bits 2-6: External Trigger Selection for injected group.

Allowed values:
0: TIM1_TRGO: Timer 1 TRGO event
1: TIM1_CC4: Timer 1 CC4 event
2: TIM2_TRGO: Timer 2 TRGO event
3: TIM2_CC1: Timer 2 CC1 event
4: TIM3_CC4: Timer 3 CC4 event
6: EXTI15: EXTI line 15
8: TIM1_TRGO2: Timer 1 TRGO2 event
11: TIM3_CC3: Timer 3 CC3 event
12: TIM3_TRGO: Timer 3 TRGO event
13: TIM3_CC1: Timer 3 CC1 event
14: TIM6_TRGO: Timer 6 TRGO event
15: TIM15_TRGO: Timer 15 TRGO event

JEXTEN

Bits 7-8: External Trigger Enable and Polarity Selection for injected channels.

Allowed values:
0: Disabled: Trigger detection disabled
1: RisingEdge: Trigger detection on the rising edge
2: FallingEdge: Trigger detection on the falling edge
3: BothEdges: Trigger detection on both the rising and falling edges

JSQ[1]

Bits 9-13: 1 conversion in injected sequence.

Allowed values: 0x0-0x13

JSQ[2]

Bits 15-19: 2 conversion in injected sequence.

Allowed values: 0x0-0x13

JSQ[3]

Bits 21-25: 3 conversion in injected sequence.

Allowed values: 0x0-0x13

JSQ[4]

Bits 27-31: 4 conversion in injected sequence.

Allowed values: 0x0-0x13

OFFSET

Bits 0-11: Data offset X for the channel programmed into bits OFFSET_CH.

Allowed values: 0x0-0xfff

OFFSETPOS

Bit 24: Positive offset.

SATEN

Bit 25: Saturation enable.

OFFSET_CH

Bits 26-30: Channel selection for the data offset X.

Allowed values: 0x0-0x1f

OFFSET_EN

Bit 31: Offset X Enable.

Allowed values:
0: Disabled: Offset disabled
1: Enabled: Offset enabled

OFFSET

Bits 0-11: Data offset X for the channel programmed into bits OFFSET_CH.

Allowed values: 0x0-0xfff

OFFSETPOS

Bit 24: Positive offset.

SATEN

Bit 25: Saturation enable.

OFFSET_CH

Bits 26-30: Channel selection for the data offset X.

Allowed values: 0x0-0x1f

OFFSET_EN

Bit 31: Offset X Enable.

Allowed values:
0: Disabled: Offset disabled
1: Enabled: Offset enabled

OFFSET

Bits 0-11: Data offset X for the channel programmed into bits OFFSET_CH.

Allowed values: 0x0-0xfff

OFFSETPOS

Bit 24: Positive offset.

SATEN

Bit 25: Saturation enable.

OFFSET_CH

Bits 26-30: Channel selection for the data offset X.

Allowed values: 0x0-0x1f

OFFSET_EN

Bit 31: Offset X Enable.

Allowed values:
0: Disabled: Offset disabled
1: Enabled: Offset enabled

OFFSET

Bits 0-11: Data offset X for the channel programmed into bits OFFSET_CH.

Allowed values: 0x0-0xfff

OFFSETPOS

Bit 24: Positive offset.

SATEN

Bit 25: Saturation enable.

OFFSET_CH

Bits 26-30: Channel selection for the data offset X.

Allowed values: 0x0-0x1f

OFFSET_EN

Bit 31: Offset X Enable.

Allowed values:
0: Disabled: Offset disabled
1: Enabled: Offset enabled

JDATA

Bits 0-15: Injected data.

JDATA

Bits 0-15: Injected data.

JDATA

Bits 0-15: Injected data.

JDATA

Bits 0-15: Injected data.

AWD2CH[0]

Bit 0: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD2CH[1]

Bit 1: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD2CH[2]

Bit 2: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD2CH[3]

Bit 3: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD2CH[4]

Bit 4: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD2CH[5]

Bit 5: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD2CH[6]

Bit 6: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD2CH[7]

Bit 7: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD2CH[8]

Bit 8: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD2CH[9]

Bit 9: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD2CH[10]

Bit 10: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD2CH[11]

Bit 11: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD2CH[12]

Bit 12: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD2CH[13]

Bit 13: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD2CH[14]

Bit 14: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD2CH[15]

Bit 15: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD2CH[16]

Bit 16: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD2CH[17]

Bit 17: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD2CH[18]

Bit 18: Analog watchdog 2 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[0]

Bit 0: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[1]

Bit 1: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[2]

Bit 2: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[3]

Bit 3: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[4]

Bit 4: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[5]

Bit 5: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[6]

Bit 6: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[7]

Bit 7: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[8]

Bit 8: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[9]

Bit 9: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[10]

Bit 10: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[11]

Bit 11: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[12]

Bit 12: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[13]

Bit 13: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[14]

Bit 14: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[15]

Bit 15: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[16]

Bit 16: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[17]

Bit 17: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

AWD3CH[18]

Bit 18: Analog watchdog 3 channel selection.

Allowed values:
0: NotMonitored: Input channel not monitored by AWDx
1: Monitored: Input channel monitored by AWDx

DIFSEL[0]

Bit 0: Differential mode for channel 0.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

DIFSEL[1]

Bit 1: Differential mode for channel 1.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

DIFSEL[2]

Bit 2: Differential mode for channel 2.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

DIFSEL[3]

Bit 3: Differential mode for channel 3.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

DIFSEL[4]

Bit 4: Differential mode for channel 4.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

DIFSEL[5]

Bit 5: Differential mode for channel 5.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

DIFSEL[6]

Bit 6: Differential mode for channel 6.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

DIFSEL[7]

Bit 7: Differential mode for channel 7.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

DIFSEL[8]

Bit 8: Differential mode for channel 8.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

DIFSEL[9]

Bit 9: Differential mode for channel 9.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

DIFSEL[10]

Bit 10: Differential mode for channel 10.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

DIFSEL[11]

Bit 11: Differential mode for channel 11.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

DIFSEL[12]

Bit 12: Differential mode for channel 12.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

DIFSEL[13]

Bit 13: Differential mode for channel 13.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

DIFSEL[14]

Bit 14: Differential mode for channel 14.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

DIFSEL[15]

Bit 15: Differential mode for channel 15.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

DIFSEL[16]

Bit 16: Differential mode for channel 16.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

DIFSEL[17]

Bit 17: Differential mode for channel 17.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

DIFSEL[18]

Bit 18: Differential mode for channel 18.

Allowed values:
0: SingleEnded: Input channel is configured in single-ended mode
1: Differential: Input channel is configured in differential mode

CALFACT_S

Bits 0-6: Calibration Factors In single-ended mode.

Allowed values: 0x0-0x7f

CALFACT_D

Bits 16-22: Calibration Factors in differential mode.

Allowed values: 0x0-0x7f

GCOMPCOEFF

Bits 0-13: Gain compensation coefficient.

ADDRDY_MST

Bit 0: ADDRDY_MST.

EOSMP_MST

Bit 1: EOSMP_MST.

Allowed values:
0: NotEnded: End of sampling phase no yet reached
1: Ended: End of sampling phase reached

EOC_MST

Bit 2: EOC_MST.

Allowed values:
0: NotComplete: Regular conversion is not complete
1: Complete: Regular conversion complete

EOS_MST

Bit 3: EOS_MST.

Allowed values:
0: NotComplete: Regular sequence is not complete
1: Complete: Regular sequence complete

OVR_MST

Bit 4: OVR_MST.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

JEOC_MST

Bit 5: JEOC_MST.

Allowed values:
0: NotComplete: Injected conversion is not complete
1: Complete: Injected conversion complete

JEOS_MST

Bit 6: JEOS_MST.

Allowed values:
0: NotComplete: Injected sequence is not complete
1: Complete: Injected sequence complete

AWD1_MST

Bit 7: AWD1_MST.

Allowed values:
0: NoEvent: No analog watchdog event occurred
1: Event: Analog watchdog event occurred

AWD2_MST

Bit 8: AWD2_MST.

Allowed values:
0: NoEvent: No analog watchdog event occurred
1: Event: Analog watchdog event occurred

AWD3_MST

Bit 9: AWD3_MST.

Allowed values:
0: NoEvent: No analog watchdog event occurred
1: Event: Analog watchdog event occurred

JQOVF_MST

Bit 10: JQOVF_MST.

Allowed values:
0: NoOverflow: No injected context queue overflow has occurred
1: Overflow: Injected context queue overflow has occurred

ADRDY_SLV

Bit 16: ADRDY_SLV.

Allowed values:
0: NotReady: ADC is not ready to start conversion
1: Ready: ADC is ready to start conversion

EOSMP_SLV

Bit 17: EOSMP_SLV.

Allowed values:
0: NotEnded: End of sampling phase no yet reached
1: Ended: End of sampling phase reached

EOC_SLV

Bit 18: End of regular conversion of the slave ADC.

Allowed values:
0: NotComplete: Regular conversion is not complete
1: Complete: Regular conversion complete

EOS_SLV

Bit 19: End of regular sequence flag of the slave ADC.

Allowed values:
0: NotComplete: Regular sequence is not complete
1: Complete: Regular sequence complete

OVR_SLV

Bit 20: Overrun flag of the slave ADC.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

JEOC_SLV

Bit 21: End of injected conversion flag of the slave ADC.

Allowed values:
0: NotComplete: Injected conversion is not complete
1: Complete: Injected conversion complete

JEOS_SLV

Bit 22: End of injected sequence flag of the slave ADC.

Allowed values:
0: NotComplete: Injected sequence is not complete
1: Complete: Injected sequence complete

AWD1_SLV

Bit 23: Analog watchdog 1 flag of the slave ADC.

Allowed values:
0: NoEvent: No analog watchdog event occurred
1: Event: Analog watchdog event occurred

AWD2_SLV

Bit 24: Analog watchdog 2 flag of the slave ADC.

Allowed values:
0: NoEvent: No analog watchdog event occurred
1: Event: Analog watchdog event occurred

AWD3_SLV

Bit 25: Analog watchdog 3 flag of the slave ADC.

Allowed values:
0: NoEvent: No analog watchdog event occurred
1: Event: Analog watchdog event occurred

JQOVF_SLV

Bit 26: Injected Context Queue Overflow flag of the slave ADC.

Allowed values:
0: NoOverflow: No injected context queue overflow has occurred
1: Overflow: Injected context queue overflow has occurred

DUAL

Bits 0-4: Dual ADC mode selection.

Allowed values:
0: Independent: Independent mode
1: DualRJ: Dual, combined regular simultaneous + injected simultaneous mode
2: DualRA: Dual, combined regular simultaneous + alternate trigger mode
3: DualIJ: Dual, combined interleaved mode + injected simultaneous mode
5: DualJ: Dual, injected simultaneous mode only
6: DualR: Dual, regular simultaneous mode only
7: DualI: Dual, interleaved mode only
9: DualA: Dual, alternate trigger mode only

DELAY

Bits 8-11: Delay between 2 sampling phases.

Allowed values: 0x0-0xf

DMACFG

Bit 13: DMA configuration (for multi-ADC mode).

MDMA

Bits 14-15: Direct memory access mode for multi ADC mode.

CKMODE

Bits 16-17: ADC clock mode.

Allowed values:
0: Asynchronous: Use Kernel Clock adc_ker_ck_input divided by PRESC. Asynchronous to AHB clock
1: SyncDiv1: Use AHB clock rcc_hclk3. In this case rcc_hclk must equal sys_d1cpre_ck
2: SyncDiv2: Use AHB clock rcc_hclk3 divided by 2
3: SyncDiv4: Use AHB clock rcc_hclk3 divided by 4

PRESC

Bits 18-21: ADC prescaler.

VREFEN

Bit 22: VREFINT enable.

Allowed values:
0: Disabled: V_REFINT channel disabled
1: Enabled: V_REFINT channel enabled

VSENSESEL

Bit 23: VTS selection.

Allowed values:
0: Disabled: Temperature sensor channel disabled
1: Enabled: Temperature sensor channel enabled

VBATSEL

Bit 24: VBAT selection.

Allowed values:
0: Disabled: V_BAT channel disabled
1: Enabled: V_BAT channel enabled

RDATA_MST

Bits 0-15: Regular data of the master ADC.

RDATA_SLV

Bits 16-31: Regular data of the slave ADC.

ADRDY

Bit 0: ADC ready.

Allowed values:
0: NotReady: ADC is not ready to start conversion
1: Ready: ADC is ready to start conversion

EOSMP

Bit 1: End of sampling flag.

Allowed values:
0: NotEnded: End of sampling phase no yet reached
1: Ended: End of sampling phase reached

EOC

Bit 2: End of conversion flag.

Allowed values:
0: NotComplete: Regular conversion is not complete
1: Complete: Regular conversion complete

EOS

Bit 3: End of regular sequence flag.

Allowed values:
0: NotComplete: Regular sequence is not complete
1: Complete: Regular sequence complete

OVR

Bit 4: ADC overrun.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

JEOC

Bit 5: Injected channel end of conversion flag.

Allowed values:
0: NotComplete: Injected conversion is not complete
1: Complete: Injected conversion complete

JEOS

Bit 6: Injected channel end of sequence flag.

Allowed values:
0: NotComplete: Injected sequence is not complete
1: Complete: Injected sequence complete

AWD[1]

Bit 7: Analog watchdog 1 flag.

Allowed values:
0: NoEvent: No analog watchdog event occurred
1: Event: Analog watchdog event occurred

AWD[2]

Bit 8: Analog watchdog 2 flag.

Allowed values:
0: NoEvent: No analog watchdog event occurred
1: Event: Analog watchdog event occurred

AWD[3]

Bit 9: Analog watchdog 3 flag.

Allowed values:
0: NoEvent: No analog watchdog event occurred
1: Event: Analog watchdog event occurred

JQOVF

Bit 10: Injected context queue overflow.

Allowed values:
0: NoOverflow: No injected context queue overflow has occurred
1: Overflow: Injected context queue overflow has occurred

ADRDYIE

Bit 0: ADC ready interrupt enable.

Allowed values:
0: Disabled: ADC ready interrupt disabled
1: Enabled: ADC ready interrupt enabled

EOSMPIE

Bit 1: End of sampling flag interrupt enable for regular conversions.

Allowed values:
0: Disabled: End of regular conversion sampling phase interrupt disabled
1: Enabled: End of regular conversion sampling phase interrupt enabled

EOCIE

Bit 2: End of regular conversion interrupt enable.

Allowed values:
0: Disabled: End of regular conversion interrupt disabled
1: Enabled: End of regular conversion interrupt enabled

EOSIE

Bit 3: End of regular sequence of conversions interrupt enable.

Allowed values:
0: Disabled: End of regular sequence interrupt disabled
1: Enabled: End of regular sequence interrupt enabled

OVRIE

Bit 4: Overrun interrupt enable.

Allowed values:
0: Disabled: Overrun interrupt disabled
1: Enabled: Overrun interrupt enabled

JEOCIE

Bit 5: End of injected conversion interrupt enable.

Allowed values:
0: Disabled: End of injected conversion interrupt disabled
1: Enabled: End of injected conversion interrupt enabled

JEOSIE

Bit 6: End of injected sequence of conversions interrupt enable.

Allowed values:
0: Disabled: End of injected sequence interrupt disabled
1: Enabled: End of injected sequence interrupt enabled

AWD[1]IE

Bit 7: Analog watchdog 1 interrupt enable.

Allowed values:
0: Disabled: Analog watchdog interrupt disabled
1: Enabled: Analog watchdog interrupt enabled

AWD[2]IE

Bit 8: Analog watchdog 2 interrupt enable.

Allowed values:
0: Disabled: Analog watchdog interrupt disabled
1: Enabled: Analog watchdog interrupt enabled

AWD[3]IE

Bit 9: Analog watchdog 3 interrupt enable.

Allowed values:
0: Disabled: Analog watchdog interrupt disabled
1: Enabled: Analog watchdog interrupt enabled

JQOVFIE

Bit 10: Injected context queue overflow interrupt enable.

Allowed values:
0: Disabled: Injected context queue overflow interrupt disabled
1: Enabled: Injected context queue overflow interrupt enabled

ADEN

Bit 0: ADC enable control.

Allowed values:
0: Disabled: ADC disabled
1: Enabled: ADC enabled

ADDIS

Bit 1: ADC disable command.

Allowed values:
0: NotDisabling: No disable command active
1: Disabling: ADC disabling

ADSTART

Bit 2: ADC start of regular conversion.

Allowed values:
0: NotActive: No conversion ongoing
1: Active: ADC operating and may be converting

JADSTART

Bit 3: ADC start of injected conversion.

Allowed values:
0: NotActive: No conversion ongoing
1: Active: ADC operating and may be converting

ADSTP

Bit 4: ADC stop of regular conversion command.

Allowed values:
0: NotStopping: No stop command active
1: Stopping: ADC stopping conversion

JADSTP

Bit 5: ADC stop of injected conversion command.

Allowed values:
0: NotStopping: No stop command active
1: Stopping: ADC stopping conversion

ADVREGEN

Bit 28: ADC voltage regulator enable.

Allowed values:
0: Disabled: ADC voltage regulator disabled
1: Enabled: ADC voltage regulator enabled

DEEPPWD

Bit 29: Deep-power-down enable.

Allowed values:
0: Disabled: ADC not in Deep-power down
1: Enabled: ADC in Deep-power-down (default reset state)

ADCALDIF

Bit 30: Differential mode for calibration.

Allowed values:
0: SingleEnded: Calibration for single-ended mode
1: Differential: Calibration for differential mode

ADCAL

Bit 31: ADC calibration.

Allowed values:
0: NotCalibrating: ADC calibration either not yet performed or completed
1: Calibrating: ADC calibration in progress

DMAEN

Bit 0: Direct memory access enable.

Allowed values:
0: Disabled: DMA disabled
1: Enabled: DMA enabled

DMACFG

Bit 1: Direct memory access configuration.

Allowed values:
0: OneShot: DMA One Shot Mode selected
1: Circular: DMA circular mode selected

RES

Bits 3-4: Data resolution.

Allowed values:
0: Bits12: 12-bit
1: Bits10: 10-bit
2: Bits8: 8-bit
3: Bits6: 6-bit

EXTSEL

Bits 5-9: External trigger selection for regular group.

Allowed values:
0: TIM1_CC1: Timer 1 CC1 event
1: TIM1_CC2: Timer 1 CC2 event
2: TIM1_CC3: Timer 1 CC3 event
3: TIM2_CC2: Timer 2 CC2 event
4: TIM3_TRGO: Timer 3 TRGO event
6: EXTI11: EXTI line 11
7: HRTIM_ADCTRG1: HRTIM_ADCTRG1 event
8: HRTIM_ADCTRG3: HRTIM_ADCTRG3 event
9: TIM1_TRGO: Timer 1 TRGO event
10: TIM1_TRGO2: Timer 1 TRGO2 event
11: TIM2_TRGO: Timer 2 TRGO event
13: TIM6_TRGO: Timer 6 TRGO event
14: TIM15_TRGO: Timer 15 TRGO event
15: TIM3_CC4: Timer 3 CC4 event

EXTEN

Bits 10-11: External trigger enable and polarity selection for regular channels.

Allowed values:
0: Disabled: Trigger detection disabled
1: RisingEdge: Trigger detection on the rising edge
2: FallingEdge: Trigger detection on the falling edge
3: BothEdges: Trigger detection on both the rising and falling edges

OVRMOD

Bit 12: Overrun mode.

Allowed values:
0: Preserve: Preserve DR register when an overrun is detected
1: Overwrite: Overwrite DR register when an overrun is detected

CONT

Bit 13: Single / continuous conversion mode for regular conversions.

Allowed values:
0: Single: Single conversion mode
1: Continuous: Continuous conversion mode

AUTDLY

Bit 14: Delayed conversion mode.

Allowed values:
0: Off: Auto delayed conversion mode off
1: On: Auto delayed conversion mode on

ALIGN

Bit 15: Data alignment.

Allowed values:
0: Right: Right alignment
1: Left: Left alignment

DISCEN

Bit 16: Discontinuous mode for regular channels.

Allowed values:
0: Disabled: Discontinuous mode on regular channels disabled
1: Enabled: Discontinuous mode on regular channels enabled

DISCNUM

Bits 17-19: Discontinuous mode channel count.

Allowed values: 0x0-0x7

JDISCEN

Bit 20: Discontinuous mode on injected channels.

Allowed values:
0: Disabled: Discontinuous mode on injected channels disabled
1: Enabled: Discontinuous mode on injected channels enabled

JQM

Bit 21: JSQR queue mode.

Allowed values:
0: Mode0: JSQR Mode 0: Queue maintains the last written configuration into JSQR
1: Mode1: JSQR Mode 1: An empty queue disables software and hardware triggers of the injected sequence

AWD1SGL

Bit 22: Enable the watchdog 1 on a single channel or on all channels.

Allowed values:
0: All: Analog watchdog 1 enabled on all channels
1: Single: Analog watchdog 1 enabled on single channel selected in AWD1CH

AWD1EN

Bit 23: Analog watchdog 1 enable on regular channels.

Allowed values:
0: Disabled: Analog watchdog 1 disabled on regular channels
1: Enabled: Analog watchdog 1 enabled on regular channels

JAWD1EN

Bit 24: Analog watchdog 1 enable on injected channels.

Allowed values:
0: Disabled: Analog watchdog 1 disabled on injected channels
1: Enabled: Analog watchdog 1 enabled on injected channels

JAUTO

Bit 25: Automatic injected group conversion.

Allowed values:
0: Disabled: Automatic injected group conversion disabled
1: Enabled: Automatic injected group conversion enabled

AWD1CH

Bits 26-30: Analog watchdog 1 channel selection.

JQDIS

Bit 31: Injected Queue disable.

Allowed values:
0: Enabled: Injected Queue enabled
1: Disabled: Injected Queue disabled