STM32L4x3 Peripheral Coverage

ADC1

0x50040000: Analog-to-Digital Converter

6/129 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	ISR																						JQOVF	AWD3	AWD2	AWD1	JEOS	JEOC	OVR	EOS	EOC	EOSMP	ADRDY
0x4	IER																						JQOVFIE	AWD3IE	AWD2IE	AWD1IE	JEOSIE	JEOCIE	OVRIE	EOSIE	EOCIE	EOSMPIE	ADRDYIE
0x8	CR	ADCAL	ADCALDIF	DEEPPWD	ADVREGEN																							JADSTP	ADSTP	JADSTART	ADSTART	ADDIS	ADEN
0xc	CFGR		AWDCH1CH					JAUTO	JAWD1EN	AWD1EN	AWD1SGL	JQM	JDISCEN	DISCNUM			DISCEN	AUTOFF	AUTDLY	CONT	OVRMOD	EXTEN		EXTSEL				ALIGN	RES			DMACFG	DMAEN
0x10	CFGR2																						ROVSM	TOVS	OVSS				OVSR			JOVSE	ROVSE
0x14	SMPR1			SMP9			SMP8			SMP7			SMP6			SMP5		SMP5	SMP4			SMP3			SMP2			SMP1			SMP0
0x18	SMPR2						SMP18			SMP17			SMP16			SMP15		SMP15	SMP14			SMP13			SMP12			SMP11			SMP10
0x20	TR1					HT1																LT1
0x24	TR2									HT2																LT2
0x28	TR3									HT3																LT3
0x30	SQR1				SQ4						SQ3						SQ2	SQ2					SQ1							L
0x34	SQR2				SQ9						SQ8						SQ7	SQ7					SQ6						SQ5
0x38	SQR3				SQ14						SQ13						SQ12	SQ12					SQ11						SQ10
0x3c	SQR4																						SQ16						SQ15
0x40	DR																	RDATA
0x4c	JSQR		JSQ4						JSQ3						JSQ2			JSQ2			JSQ1					JEXTEN		JEXTSEL				JL
0x60	OFR1	OFFSET1_EN	OFFSET1_CH																			OFFSET1
0x64	OFR2	OFFSET2_EN	OFFSET2_CH																			OFFSET2
0x68	OFR3	OFFSET3_EN	OFFSET3_CH																			OFFSET3
0x6c	OFR4	OFFSET4_EN	OFFSET4_CH																			OFFSET4
0x80	JDR1																	JDATA1
0x84	JDR2																	JDATA2
0x88	JDR3																	JDATA3
0x8c	JDR4																	JDATA4
0xa0	AWD2CR														AWD2CH			AWD2CH
0xa4	AWD3CR														AWD3CH			AWD3CH
0xb0	DIFSEL														DIFSEL_16_18			DIFSEL_1_15
0xb4	CALFACT										CALFACT_D																CALFACT_S

Toggle registers

ISR

interrupt and status register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/11 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
					JQOVF rw	AWD3 rw	AWD2 rw	AWD1 rw	JEOS rw	JEOC rw	OVR rw	EOS rw	EOC rw	EOSMP rw	ADRDY rw

Toggle fields

ADRDY

Bit 0: ADRDY.

EOSMP

Bit 1: EOSMP.

EOC

Bit 2: EOC.

EOS

Bit 3: EOS.

OVR

Bit 4: OVR.

JEOC

Bit 5: JEOC.

JEOS

Bit 6: JEOS.

AWD1

Bit 7: AWD1.

AWD2

Bit 8: AWD2.

AWD3

Bit 9: AWD3.

JQOVF

Bit 10: JQOVF.

IER

interrupt enable register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

0/11 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
					JQOVFIE rw	AWD3IE rw	AWD2IE rw	AWD1IE rw	JEOSIE rw	JEOCIE rw	OVRIE rw	EOSIE rw	EOCIE rw	EOSMPIE rw	ADRDYIE rw

Toggle fields

ADRDYIE

Bit 0: ADRDYIE.

EOSMPIE

Bit 1: EOSMPIE.

EOCIE

Bit 2: EOCIE.

EOSIE

Bit 3: EOSIE.

OVRIE

Bit 4: OVRIE.

JEOCIE

Bit 5: JEOCIE.

JEOSIE

Bit 6: JEOSIE.

AWD1IE

Bit 7: AWD1IE.

AWD2IE

Bit 8: AWD2IE.

AWD3IE

Bit 9: AWD3IE.

JQOVFIE

Bit 10: JQOVFIE.

CR

control register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/10 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
ADCAL rw	ADCALDIF rw	DEEPPWD rw	ADVREGEN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
										JADSTP rw	ADSTP rw	JADSTART rw	ADSTART rw	ADDIS rw	ADEN rw

Toggle fields

ADEN

Bit 0: ADEN.

ADDIS

Bit 1: ADDIS.

ADSTART

Bit 2: ADSTART.

JADSTART

Bit 3: JADSTART.

ADSTP

Bit 4: ADSTP.

JADSTP

Bit 5: JADSTP.

ADVREGEN

Bit 28: ADVREGEN.

DEEPPWD

Bit 29: DEEPPWD.

ADCALDIF

Bit 30: ADCALDIF.

ADCAL

Bit 31: ADCAL.

CFGR

configuration register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

0/19 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
	AWDCH1CH rw					JAUTO rw	JAWD1EN rw	AWD1EN rw	AWD1SGL rw	JQM rw	JDISCEN rw	DISCNUM rw			DISCEN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AUTOFF rw	AUTDLY rw	CONT rw	OVRMOD rw	EXTEN rw		EXTSEL rw				ALIGN rw	RES rw			DMACFG rw	DMAEN rw

Toggle fields

DMAEN

Bit 0: DMAEN.

DMACFG

Bit 1: DMACFG.

RES

Bits 3-4: RES.

ALIGN

Bit 5: ALIGN.

EXTSEL

Bits 6-9: EXTSEL.

EXTEN

Bits 10-11: EXTEN.

OVRMOD

Bit 12: OVRMOD.

CONT

Bit 13: CONT.

AUTDLY

Bit 14: AUTDLY.

AUTOFF

Bit 15: AUTOFF.

DISCEN

Bit 16: DISCEN.

DISCNUM

Bits 17-19: DISCNUM.

JDISCEN

Bit 20: JDISCEN.

JQM

Bit 21: JQM.

AWD1SGL

Bit 22: AWD1SGL.

AWD1EN

Bit 23: AWD1EN.

JAWD1EN

Bit 24: JAWD1EN.

JAUTO

Bit 25: JAUTO.

AWDCH1CH

Bits 26-30: AWDCH1CH.

CFGR2

configuration register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

0/6 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
					ROVSM rw	TOVS rw	OVSS rw				OVSR rw			JOVSE rw	ROVSE rw

Toggle fields

ROVSE

Bit 0: DMAEN.

JOVSE

Bit 1: DMACFG.

OVSR

Bits 2-4: RES.

OVSS

Bits 5-8: ALIGN.

TOVS

Bit 9: EXTSEL.

ROVSM

Bit 10: EXTEN.

SMPR1

sample time register 1

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

0/10 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
		SMP9 rw			SMP8 rw			SMP7 rw			SMP6 rw			SMP5 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SMP5 rw	SMP4 rw			SMP3 rw			SMP2 rw			SMP1 rw			SMP0 rw

Toggle fields

SMP0

Bits 0-2: Channel 0 sampling time selection.

SMP1

Bits 3-5: Channel 1 sampling time selection.

SMP2

Bits 6-8: Channel 2 sampling time selection.

SMP3

Bits 9-11: Channel 3 sampling time selection.

SMP4

Bits 12-14: Channel 4 sampling time selection.

SMP5

Bits 15-17: Channel 5 sampling time selection.

SMP6

Bits 18-20: Channel 6 sampling time selection.

SMP7

Bits 21-23: Channel 7 sampling time selection.

SMP8

Bits 24-26: Channel 8 sampling time selection.

SMP9

Bits 27-29: Channel 9 sampling time selection.

SMPR2

sample time register 2

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

0/9 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
					SMP18 rw			SMP17 rw			SMP16 rw			SMP15 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SMP15 rw	SMP14 rw			SMP13 rw			SMP12 rw			SMP11 rw			SMP10 rw

Toggle fields

SMP10

Bits 0-2: Channel 10 sampling time selection.

SMP11

Bits 3-5: Channel 11 sampling time selection.

SMP12

Bits 6-8: Channel 12 sampling time selection.

SMP13

Bits 9-11: Channel 13 sampling time selection.

SMP14

Bits 12-14: Channel 14 sampling time selection.

SMP15

Bits 15-17: Channel 15 sampling time selection.

SMP16

Bits 18-20: Channel 16 sampling time selection.

SMP17

Bits 21-23: Channel 17 sampling time selection.

SMP18

Bits 24-26: Channel 18 sampling time selection.

TR1

watchdog threshold register 1

Offset: 0x20, size: 32, reset: 0x0FFF0000, access: read-write

0/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
				HT1 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				LT1 rw

Toggle fields

LT1

Bits 0-11: LT1.

HT1

Bits 16-27: HT1.

TR2

watchdog threshold register

Offset: 0x24, size: 32, reset: 0x0FFF0000, access: read-write

0/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								HT2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								LT2 rw

Toggle fields

LT2

Bits 0-7: LT2.

HT2

Bits 16-23: HT2.

TR3

watchdog threshold register 3

Offset: 0x28, size: 32, reset: 0x0FFF0000, access: read-write

0/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								HT3 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								LT3 rw

Toggle fields

LT3

Bits 0-7: LT3.

HT3

Bits 16-23: HT3.

SQR1

regular sequence register 1

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

0/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
			SQ4 rw						SQ3 rw						SQ2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SQ2 rw					SQ1 rw							L rw

Toggle fields

L

Bits 0-3: Regular channel sequence length.

SQ1

Bits 6-10: SQ1.

SQ2

Bits 12-16: SQ2.

SQ3

Bits 18-22: SQ3.

SQ4

Bits 24-28: SQ4.

SQR2

regular sequence register 2

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

0/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
			SQ9 rw						SQ8 rw						SQ7 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SQ7 rw					SQ6 rw						SQ5 rw

Toggle fields

SQ5

Bits 0-4: SQ5.

SQ6

Bits 6-10: SQ6.

SQ7

Bits 12-16: SQ7.

SQ8

Bits 18-22: SQ8.

SQ9

Bits 24-28: SQ9.

SQR3

regular sequence register 3

Offset: 0x38, size: 32, reset: 0x00000000, access: read-write

0/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
			SQ14 rw						SQ13 rw						SQ12 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SQ12 rw					SQ11 rw						SQ10 rw

Toggle fields

SQ10

Bits 0-4: SQ10.

SQ11

Bits 6-10: SQ11.

SQ12

Bits 12-16: SQ12.

SQ13

Bits 18-22: SQ13.

SQ14

Bits 24-28: SQ14.

SQR4

regular sequence register 4

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
					SQ16 rw						SQ15 rw

Toggle fields

SQ15

Bits 0-4: SQ15.

SQ16

Bits 6-10: SQ16.

DR

regular Data Register

Offset: 0x40, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RDATA r

Toggle fields

RDATA

Bits 0-15: Regular data.

JSQR

injected sequence register

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

0/7 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
	JSQ4 rw						JSQ3 rw						JSQ2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
JSQ2 rw			JSQ1 rw					JEXTEN rw		JEXTSEL rw				JL rw

Toggle fields

JL

Bits 0-1: JL.

JEXTSEL

Bits 2-5: JEXTSEL.

JEXTEN

Bits 6-7: JEXTEN.

JSQ1

Bits 8-12: JSQ1.

JSQ2

Bits 14-18: JSQ2.

JSQ3

Bits 20-24: JSQ3.

JSQ4

Bits 26-30: JSQ4.

OFR1

offset register 1

Offset: 0x60, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
OFFSET1_EN rw	OFFSET1_CH rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				OFFSET1 rw

Toggle fields

OFFSET1

Bits 0-11: OFFSET1.

OFFSET1_CH

Bits 26-30: OFFSET1_CH.

OFFSET1_EN

Bit 31: OFFSET1_EN.

OFR2

offset register 2

Offset: 0x64, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
OFFSET2_EN rw	OFFSET2_CH rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				OFFSET2 rw

Toggle fields

OFFSET2

Bits 0-11: OFFSET2.

OFFSET2_CH

Bits 26-30: OFFSET2_CH.

OFFSET2_EN

Bit 31: OFFSET2_EN.

OFR3

offset register 3

Offset: 0x68, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
OFFSET3_EN rw	OFFSET3_CH rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				OFFSET3 rw

Toggle fields

OFFSET3

Bits 0-11: OFFSET3.

OFFSET3_CH

Bits 26-30: OFFSET3_CH.

OFFSET3_EN

Bit 31: OFFSET3_EN.

OFR4

offset register 4

Offset: 0x6c, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
OFFSET4_EN rw	OFFSET4_CH rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				OFFSET4 rw

Toggle fields

OFFSET4

Bits 0-11: OFFSET4.

OFFSET4_CH

Bits 26-30: OFFSET4_CH.

OFFSET4_EN

Bit 31: OFFSET4_EN.

JDR1

injected data register 1

Offset: 0x80, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
JDATA1 r

Toggle fields

JDATA1

Bits 0-15: JDATA1.

JDR2

injected data register 2

Offset: 0x84, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
JDATA2 r

Toggle fields

JDATA2

Bits 0-15: JDATA2.

JDR3

injected data register 3

Offset: 0x88, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
JDATA3 r

Toggle fields

JDATA3

Bits 0-15: JDATA3.

JDR4

injected data register 4

Offset: 0x8c, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
JDATA4 r

Toggle fields

JDATA4

Bits 0-15: JDATA4.

AWD2CR

Analog Watchdog 2 Configuration Register

Offset: 0xa0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
													AWD2CH rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AWD2CH rw

Toggle fields

AWD2CH

Bits 1-18: AWD2CH.

AWD3CR

Analog Watchdog 3 Configuration Register

Offset: 0xa4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
													AWD3CH rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AWD3CH rw

Toggle fields

AWD3CH

Bits 1-18: AWD3CH.

DIFSEL

Differential Mode Selection Register 2

Offset: 0xb0, size: 32, reset: 0x00000000, access: Unspecified

1/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
													DIFSEL_16_18 r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DIFSEL_1_15 rw

Toggle fields

DIFSEL_1_15

Bits 1-15: Differential mode for channels 15 to 1.

DIFSEL_16_18

Bits 16-18: Differential mode for channels 18 to 16.

CALFACT

Calibration Factors

Offset: 0xb4, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
									CALFACT_D rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									CALFACT_S rw

Toggle fields

CALFACT_S

Bits 0-6: CALFACT_S.

CALFACT_D

Bits 16-22: CALFACT_D.

ADC_Common

0x50040300: ADC common registers

24/33 fields covered.

Toggle register map

Offset	Name	31	26	25	24	23	22	21	20	19	18	17	16	15	13	11	10	9	8	7	6	5	4	3	2	1	0
0x0	CSR		JQOVF_SLV	AWD3_SLV	AWD2_SLV	AWD1_SLV	JEOS_SLV	JEOC_SLV	OVR_SLV	EOS_SLV	EOC_SLV	EOSMP_SLV	ADRDY_SLV				JQOVF_MST	AWD3_MST	AWD2_MST	AWD1_MST	JEOS_MST	JEOC_MST	OVR_MST	EOS_MST	EOC_MST	EOSMP_MST	ADRDY_MST
0x8	CCR				CH18SEL	CH17SEL	VREFEN	PRESC				CKMODE		MDMA	DMACFG	DELAY							DUAL
0xc	CDR	RDATA_SLV												RDATA_MST

Toggle registers

CSR

ADC common status register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-only

22/22 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
					JQOVF_SLV r	AWD3_SLV r	AWD2_SLV r	AWD1_SLV r	JEOS_SLV r	JEOC_SLV r	OVR_SLV r	EOS_SLV r	EOC_SLV r	EOSMP_SLV r	ADRDY_SLV r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
					JQOVF_MST r	AWD3_MST r	AWD2_MST r	AWD1_MST r	JEOS_MST r	JEOC_MST r	OVR_MST r	EOS_MST r	EOC_MST r	EOSMP_MST r	ADRDY_MST r

Toggle fields

ADRDY_MST

Bit 0: master ADC ready.

EOSMP_MST

Bit 1: End of Sampling phase flag of the master ADC.

EOC_MST

Bit 2: End of regular conversion flag of the master ADC.

EOS_MST

Bit 3: End of regular sequence flag of the master ADC.

OVR_MST

Bit 4: Overrun flag of the master ADC.

JEOC_MST

Bit 5: End of injected conversion flag of the master ADC.

JEOS_MST

Bit 6: End of injected sequence flag of the master ADC.

AWD1_MST

Bit 7: Analog watchdog 1 flag of the master ADC.

AWD2_MST

Bit 8: Analog watchdog 2 flag of the master ADC.

AWD3_MST

Bit 9: Analog watchdog 3 flag of the master ADC.

JQOVF_MST

Bit 10: Injected Context Queue Overflow flag of the master ADC.

ADRDY_SLV

Bit 16: Slave ADC ready.

EOSMP_SLV

Bit 17: End of Sampling phase flag of the slave ADC.

EOC_SLV

Bit 18: End of regular conversion flag of the slave ADC.

EOS_SLV

Bit 19: End of regular sequence flag of the slave ADC.

OVR_SLV

Bit 20: Overrun flag of the slave ADC.

JEOC_SLV

Bit 21: End of injected conversion flag of the slave ADC.

JEOS_SLV

Bit 22: End of injected sequence flag of the slave ADC.

AWD1_SLV

Bit 23: Analog watchdog 1 flag of the slave ADC.

AWD2_SLV

Bit 24: Analog watchdog 2 flag of the slave ADC.

AWD3_SLV

Bit 25: Analog watchdog 3 flag of the slave ADC.

JQOVF_SLV

Bit 26: Injected Context Queue Overflow flag of the slave ADC.

CCR

ADC common control register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/9 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
							CH18SEL rw	CH17SEL rw	VREFEN rw	PRESC rw				CKMODE rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MDMA rw		DMACFG rw		DELAY rw							DUAL rw

Toggle fields

DUAL

Bits 0-4: Dual ADC mode selection.

DELAY

Bits 8-11: Delay between 2 sampling phases.

DMACFG

Bit 13: DMA configuration (for dual ADC mode).

MDMA

Bits 14-15: Direct memory access mode for dual ADC mode.

CKMODE

Bits 16-17: ADC clock mode.

PRESC

Bits 18-21: ADC prescaler.

VREFEN

Bit 22: Vrefint enable.

CH17SEL

Bit 23: CH17 selection (temperature).

CH18SEL

Bit 24: CH18 selection (Vbat).

CDR

ADC common regular data register for dual mode

Offset: 0xc, size: 32, reset: 0x00000000, access: read-only

2/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
RDATA_SLV r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RDATA_MST r

Toggle fields

RDATA_MST

Bits 0-15: Regular data of the master ADC.

RDATA_SLV

Bits 16-31: Regular data of the slave ADC.

AES

0x50060000: Advanced encryption standard hardware accelerator

4/23 fields covered.

Toggle register map

Offset	Name	31	15	12	11	10	9	8	7	6	4	2	1	0
0x0	CR			DMAOUTEN	DMAINEN	ERRIE	CCFIE	ERRC	CCFC	CHMOD	MODE	DATATYPE		EN
0x4	SR											WRERR	RDERR	CCF
0x8	DINR	AES_DINR	AES_DINR
0xc	DOUTR	AES_DOUTR	AES_DOUTR
0x10	KEYR0	AES_KEYR0	AES_KEYR0
0x14	KEYR1	AES_KEYR1	AES_KEYR1
0x18	KEYR2	AES_KEYR2	AES_KEYR2
0x1c	KEYR3	AES_KEYR3	AES_KEYR3
0x20	IVR0	AES_IVR0	AES_IVR0
0x24	IVR1	AES_IVR1	AES_IVR1
0x28	IVR2	AES_IVR2	AES_IVR2
0x2c	IVR3	AES_IVR3	AES_IVR3

Toggle registers

CR

control register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/10 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			DMAOUTEN rw	DMAINEN rw	ERRIE rw	CCFIE rw	ERRC rw	CCFC rw	CHMOD rw		MODE rw		DATATYPE rw		EN rw

Toggle fields

EN

Bit 0: AES enable.

DATATYPE

Bits 1-2: Data type selection (for data in and data out to/from the cryptographic block).

MODE

Bits 3-4: AES operating mode.

CHMOD

Bits 5-6: AES chaining mode.

CCFC

Bit 7: Computation Complete Flag Clear.

ERRC

Bit 8: Error clear.

CCFIE

Bit 9: CCF flag interrupt enable.

ERRIE

Bit 10: Error interrupt enable.

DMAINEN

Bit 11: Enable DMA management of data input phase.

DMAOUTEN

Bit 12: Enable DMA management of data output phase.

SR

status register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-only

3/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
													WRERR r	RDERR r	CCF r

Toggle fields

CCF

Bit 0: Computation complete flag.

RDERR

Bit 1: Read error flag.

WRERR

Bit 2: Write error flag.

DINR

data input register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AES_DINR rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AES_DINR rw

Toggle fields

AES_DINR

Bits 0-31: Data Input Register.

DOUTR

data output register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AES_DOUTR r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AES_DOUTR r

Toggle fields

AES_DOUTR

Bits 0-31: Data output register.

KEYR0

key register 0

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AES_KEYR0 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AES_KEYR0 rw

Toggle fields

AES_KEYR0

Bits 0-31: Data Output Register (LSB key [31:0]).

KEYR1

key register 1

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AES_KEYR1 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AES_KEYR1 rw

Toggle fields

AES_KEYR1

Bits 0-31: AES key register (key [63:32]).

KEYR2

key register 2

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AES_KEYR2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AES_KEYR2 rw

Toggle fields

AES_KEYR2

Bits 0-31: AES key register (key [95:64]).

KEYR3

key register 3

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AES_KEYR3 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AES_KEYR3 rw

Toggle fields

AES_KEYR3

Bits 0-31: AES key register (MSB key [127:96]).

IVR0

initialization vector register 0

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AES_IVR0 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AES_IVR0 rw

Toggle fields

AES_IVR0

Bits 0-31: initialization vector register (LSB IVR [31:0]).

IVR1

initialization vector register 1

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AES_IVR1 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AES_IVR1 rw

Toggle fields

AES_IVR1

Bits 0-31: Initialization Vector Register (IVR [63:32]).

IVR2

initialization vector register 2

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AES_IVR2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AES_IVR2 rw

Toggle fields

AES_IVR2

Bits 0-31: Initialization Vector Register (IVR [95:64]).

IVR3

initialization vector register 3

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AES_IVR3 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AES_IVR3 rw

Toggle fields

AES_IVR3

Bits 0-31: Initialization Vector Register (MSB IVR [127:96]).

CAN1

0x40006400: Controller area network

82/266 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	26	25	23	22	20	19	18	17	16	15	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	MCR														DBF	RESET							TTCM	ABOM	AWUM	NART	RFLM	TXFP	SLEEP	INRQ
0x4	MSR																		RX	SAMP	RXM	TXM				SLAKI	WKUI	ERRI	SLAK	INAK
0x8	TSR	LOW[2]	LOW[1]	LOW[0]	TME[2]	TME[1]	TME[0]	CODE	ABRQ2			TERR2	ALST2	TXOK2	RQCP2	ABRQ1			TERR1	ALST1	TXOK1	RQCP1	ABRQ0				TERR0	ALST0	TXOK0	RQCP0
0xc	RF[0]R																								RFOM	FOVR	FULL		FMP
0x10	RF[1]R																								RFOM	FOVR	FULL		FMP
0x14	IER													SLKIE	WKUIE	ERRIE			LECIE	BOFIE	EPVIE	EWGIE		FOVIE1	FFIE1	FMPIE1	FOVIE0	FFIE0	FMPIE0	TMEIE
0x18	ESR	REC							TEC															LEC				BOFF	EPVF	EWGF
0x1c	BTR	SILM	LBKM					SJW		TS2		TS1									BRP
0x180	TIR [0]	STID									EXID					EXID												IDE	RTR	TXRQ
0x184	TDTR [0]	TIME																				TGT					DLC
0x188	TDLR [0]	DATA[3]							DATA[2]							DATA[1]							DATA[0]
0x18c	TDHR [0]	DATA[7]							DATA[6]							DATA[5]							DATA[4]
0x190	TIR [1]	STID									EXID					EXID												IDE	RTR	TXRQ
0x194	TDTR [1]	TIME																				TGT					DLC
0x198	TDLR [1]	DATA[3]							DATA[2]							DATA[1]							DATA[0]
0x19c	TDHR [1]	DATA[7]							DATA[6]							DATA[5]							DATA[4]
0x1a0	TIR [2]	STID									EXID					EXID												IDE	RTR	TXRQ
0x1a4	TDTR [2]	TIME																				TGT					DLC
0x1a8	TDLR [2]	DATA[3]							DATA[2]							DATA[1]							DATA[0]
0x1ac	TDHR [2]	DATA[7]							DATA[6]							DATA[5]							DATA[4]
0x1b0	RIR [0]	STID									EXID					EXID												IDE	RTR
0x1b4	RDTR [0]	TIME														FMI											DLC
0x1b8	RDLR [0]	DATA[3]							DATA[2]							DATA[1]							DATA[0]
0x1bc	RDHR [0]	DATA[7]							DATA[6]							DATA[5]							DATA[4]
0x1c0	RIR [1]	STID									EXID					EXID												IDE	RTR
0x1c4	RDTR [1]	TIME														FMI											DLC
0x1c8	RDLR [1]	DATA[3]							DATA[2]							DATA[1]							DATA[0]
0x1cc	RDHR [1]	DATA[7]							DATA[6]							DATA[5]							DATA[4]
0x200	FMR																													FINIT
0x204	FM1R																FBM[13]	FBM[12]	FBM[11]	FBM[10]	FBM[9]	FBM[8]	FBM[7]	FBM[6]	FBM[5]	FBM[4]	FBM[3]	FBM[2]	FBM[1]	FBM[0]
0x20c	FS1R																FSC[13]	FSC[12]	FSC[11]	FSC[10]	FSC[9]	FSC[8]	FSC[7]	FSC[6]	FSC[5]	FSC[4]	FSC[3]	FSC[2]	FSC[1]	FSC[0]
0x214	FFA1R																FFA[13]	FFA[12]	FFA[11]	FFA[10]	FFA[9]	FFA[8]	FFA[7]	FFA[6]	FFA[5]	FFA[4]	FFA[3]	FFA[2]	FFA[1]	FFA[0]
0x21c	FA1R																FACT[13]	FACT[12]	FACT[11]	FACT[10]	FACT[9]	FACT[8]	FACT[7]	FACT[6]	FACT[5]	FACT[4]	FACT[3]	FACT[2]	FACT[1]	FACT[0]
0x240	FR1 [0]	FB														FB
0x244	FR2 [0]	FB														FB
0x248	FR1 [1]	FB														FB
0x24c	FR2 [1]	FB														FB
0x250	FR1 [2]	FB														FB
0x254	FR2 [2]	FB														FB
0x258	FR1 [3]	FB														FB
0x25c	FR2 [3]	FB														FB
0x260	FR1 [4]	FB														FB
0x264	FR2 [4]	FB														FB
0x268	FR1 [5]	FB														FB
0x26c	FR2 [5]	FB														FB
0x270	FR1 [6]	FB														FB
0x274	FR2 [6]	FB														FB
0x278	FR1 [7]	FB														FB
0x27c	FR2 [7]	FB														FB
0x280	FR1 [8]	FB														FB
0x284	FR2 [8]	FB														FB
0x288	FR1 [9]	FB														FB
0x28c	FR2 [9]	FB														FB
0x290	FR1 [10]	FB														FB
0x294	FR2 [10]	FB														FB
0x298	FR1 [11]	FB														FB
0x29c	FR2 [11]	FB														FB
0x2a0	FR1 [12]	FB														FB
0x2a4	FR2 [12]	FB														FB
0x2a8	FR1 [13]	FB														FB
0x2ac	FR2 [13]	FB														FB
0x2b0	FR1 [14]	FB														FB
0x2b4	FR2 [14]	FB														FB
0x2b8	FR1 [15]	FB														FB
0x2bc	FR2 [15]	FB														FB
0x2c0	FR1 [16]	FB														FB
0x2c4	FR2 [16]	FB														FB
0x2c8	FR1 [17]	FB														FB
0x2cc	FR2 [17]	FB														FB
0x2d0	FR1 [18]	FB														FB
0x2d4	FR2 [18]	FB														FB
0x2d8	FR1 [19]	FB														FB
0x2dc	FR2 [19]	FB														FB
0x2e0	FR1 [20]	FB														FB
0x2e4	FR2 [20]	FB														FB
0x2e8	FR1 [21]	FB														FB
0x2ec	FR2 [21]	FB														FB
0x2f0	FR1 [22]	FB														FB
0x2f4	FR2 [22]	FB														FB
0x2f8	FR1 [23]	FB														FB
0x2fc	FR2 [23]	FB														FB
0x300	FR1 [24]	FB														FB
0x304	FR2 [24]	FB														FB
0x308	FR1 [25]	FB														FB
0x30c	FR2 [25]	FB														FB
0x310	FR1 [26]	FB														FB
0x314	FR2 [26]	FB														FB
0x318	FR1 [27]	FB														FB
0x31c	FR2 [27]	FB														FB

Toggle registers

MCR

master control register

Offset: 0x0, size: 32, reset: 0x00010002, access: read-write

0/10 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
															DBF rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RESET rw								TTCM rw	ABOM rw	AWUM rw	NART rw	RFLM rw	TXFP rw	SLEEP rw	INRQ rw

Toggle fields

INRQ

Bit 0: INRQ.

SLEEP

Bit 1: SLEEP.

TXFP

Bit 2: TXFP.

RFLM

Bit 3: RFLM.

NART

Bit 4: NART.

AWUM

Bit 5: AWUM.

ABOM

Bit 6: ABOM.

TTCM

Bit 7: TTCM.

RESET

Bit 15: RESET.

DBF

Bit 16: DBF.

MSR

master status register

Offset: 0x4, size: 32, reset: 0x00000C02, access: Unspecified

6/9 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				RX r	SAMP r	RXM r	TXM r				SLAKI rw	WKUI rw	ERRI rw	SLAK r	INAK r

Toggle fields

INAK

Bit 0: INAK.

SLAK

Bit 1: SLAK.

ERRI

Bit 2: ERRI.

WKUI

Bit 3: WKUI.

SLAKI

Bit 4: SLAKI.

TXM

Bit 8: TXM.

RXM

Bit 9: RXM.

SAMP

Bit 10: SAMP.

RX

Bit 11: RX.

TSR

transmit status register

Offset: 0x8, size: 32, reset: 0x1C000000, access: Unspecified

7/22 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
LOW[2] r	LOW[1] r	LOW[0] r	TME[2] r	TME[1] r	TME[0] r	CODE r		ABRQ2 rw				TERR2 rw	ALST2 rw	TXOK2 rw	RQCP2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ABRQ1 rw				TERR1 rw	ALST1 rw	TXOK1 rw	RQCP1 rw	ABRQ0 rw				TERR0 rw	ALST0 rw	TXOK0 rw	RQCP0 rw

Toggle fields

RQCP0

Bit 0: RQCP0.

TXOK0

Bit 1: TXOK0.

ALST0

Bit 2: ALST0.

TERR0

Bit 3: TERR0.

ABRQ0

Bit 7: ABRQ0.

RQCP1

Bit 8: RQCP1.

TXOK1

Bit 9: TXOK1.

ALST1

Bit 10: ALST1.

TERR1

Bit 11: TERR1.

ABRQ1

Bit 15: ABRQ1.

RQCP2

Bit 16: RQCP2.

TXOK2

Bit 17: TXOK2.

ALST2

Bit 18: ALST2.

TERR2

Bit 19: TERR2.

ABRQ2

Bit 23: ABRQ2.

CODE

Bits 24-25: CODE.

TME[0]

Bit 26: Lowest priority flag for mailbox 0.

TME[1]

Bit 27: Lowest priority flag for mailbox 1.

TME[2]

Bit 28: Lowest priority flag for mailbox 2.

LOW[0]

Bit 29: Lowest priority flag for mailbox 0.

LOW[1]

Bit 30: Lowest priority flag for mailbox 1.

LOW[2]

Bit 31: Lowest priority flag for mailbox 2.

RF[0]R

receive FIFO 0 register

Offset: 0xc, size: 32, reset: 0x00000000, access: Unspecified

4/4 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
										RFOM rw	FOVR rw	FULL rw		FMP r

Toggle fields

FMP

Bits 0-1: FMP0.

FULL

Bit 3: FULL0.

Allowed values:
0: NotFull: FIFO x is not full
1: Full: FIFO x is full

FOVR

Bit 4: FOVR0.

Allowed values:
0: NoOverrun: No FIFO x overrun
1: Overrun: FIFO x overrun

RFOM

Bit 5: RFOM0.

Allowed values:
1: Release: Set by software to release the output mailbox of the FIFO

RF[1]R

receive FIFO 1 register

Offset: 0x10, size: 32, reset: 0x00000000, access: Unspecified

4/4 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
										RFOM rw	FOVR rw	FULL rw		FMP r

Toggle fields

FMP

Bits 0-1: FMP0.

FULL

Bit 3: FULL0.

Allowed values:
0: NotFull: FIFO x is not full
1: Full: FIFO x is full

FOVR

Bit 4: FOVR0.

Allowed values:
0: NoOverrun: No FIFO x overrun
1: Overrun: FIFO x overrun

RFOM

Bit 5: RFOM0.

Allowed values:
1: Release: Set by software to release the output mailbox of the FIFO

IER

interrupt enable register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

14/14 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
														SLKIE rw	WKUIE rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ERRIE rw				LECIE rw	BOFIE rw	EPVIE rw	EWGIE rw		FOVIE1 rw	FFIE1 rw	FMPIE1 rw	FOVIE0 rw	FFIE0 rw	FMPIE0 rw	TMEIE rw

Toggle fields

TMEIE

Bit 0: TMEIE.

Allowed values:
0: Disabled: No interrupt when RQCPx bit is set
1: Enabled: Interrupt generated when RQCPx bit is set

FMPIE0

Bit 1: FMPIE0.

Allowed values:
0: Disabled: No interrupt generated when state of FMP[1:0] bits are not 00
1: Enabled: Interrupt generated when state of FMP[1:0] bits are not 00b

FFIE0

Bit 2: FFIE0.

Allowed values:
0: Disabled: No interrupt when FULL bit is set
1: Enabled: Interrupt generated when FULL bit is set

FOVIE0

Bit 3: FOVIE0.

Allowed values:
0: Disabled: No interrupt when FOVR bit is set
1: Enabled: Interrupt generated when FOVR bit is set

FMPIE1

Bit 4: FMPIE1.

Allowed values:
0: Disabled: No interrupt generated when state of FMP[1:0] bits are not 00b
1: Enabled: Interrupt generated when state of FMP[1:0] bits are not 00b

FFIE1

Bit 5: FFIE1.

Allowed values:
0: Disabled: No interrupt when FULL bit is set
1: Enabled: Interrupt generated when FULL bit is set

FOVIE1

Bit 6: FOVIE1.

Allowed values:
0: Disabled: No interrupt when FOVR is set
1: Enabled: Interrupt generation when FOVR is set

EWGIE

Bit 8: EWGIE.

Allowed values:
0: Disabled: ERRI bit will not be set when EWGF is set
1: Enabled: ERRI bit will be set when EWGF is set

EPVIE

Bit 9: EPVIE.

Allowed values:
0: Disabled: ERRI bit will not be set when EPVF is set
1: Enabled: ERRI bit will be set when EPVF is set

BOFIE

Bit 10: BOFIE.

Allowed values:
0: Disabled: ERRI bit will not be set when BOFF is set
1: Enabled: ERRI bit will be set when BOFF is set

LECIE

Bit 11: LECIE.

Allowed values:
0: Disabled: ERRI bit will not be set when the error code in LEC[2:0] is set by hardware on error detection
1: Enabled: ERRI bit will be set when the error code in LEC[2:0] is set by hardware on error detection

ERRIE

Bit 15: ERRIE.

Allowed values:
0: Disabled: No interrupt will be generated when an error condition is pending in the CAN_ESR
1: Enabled: An interrupt will be generation when an error condition is pending in the CAN_ESR

WKUIE

Bit 16: WKUIE.

Allowed values:
0: Disabled: No interrupt when WKUI is set
1: Enabled: Interrupt generated when WKUI bit is set

SLKIE

Bit 17: SLKIE.

Allowed values:
0: Disabled: No interrupt when SLAKI bit is set
1: Enabled: Interrupt generated when SLAKI bit is set

ESR

interrupt enable register

Offset: 0x18, size: 32, reset: 0x00000000, access: Unspecified

6/6 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
REC r								TEC r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									LEC rw				BOFF r	EPVF r	EWGF r

Toggle fields

EWGF

Bit 0: EWGF.

EPVF

Bit 1: EPVF.

BOFF

Bit 2: BOFF.

LEC

Bits 4-6: LEC.

Allowed values:
0: NoError: No Error
1: Stuff: Stuff Error
2: Form: Form Error
3: Ack: Acknowledgment Error
4: BitRecessive: Bit recessive Error
5: BitDominant: Bit dominant Error
6: Crc: CRC Error
7: Custom: Set by software

TEC

Bits 16-23: TEC.

REC

Bits 24-31: REC.

BTR

bit timing register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

2/6 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
SILM rw	LBKM rw					SJW rw			TS2 rw			TS1 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
						BRP rw

Toggle fields

BRP

Bits 0-9: BRP.

TS1

Bits 16-19: TS1.

TS2

Bits 20-22: TS2.

SJW

Bits 24-25: SJW.

LBKM

Bit 30: LBKM.

Allowed values:
0: Disabled: Loop Back Mode disabled
1: Enabled: Loop Back Mode enabled

SILM

Bit 31: SILM.

Allowed values:
0: Normal: Normal operation
1: Silent: Silent Mode

TIR [0]

TX mailbox identifier register

Offset: 0x180, size: 32, reset: 0x00000000, access: read-write

2/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
STID rw											EXID rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
EXID rw													IDE rw	RTR rw	TXRQ rw

Toggle fields

TXRQ

Bit 0: TXRQ.

RTR

Bit 1: RTR.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

IDE

Bit 2: IDE.

Allowed values:
0: Standard: Standard identifier
1: Extended: Extended identifier

EXID

Bits 3-20: EXID.

STID

Bits 21-31: STID.

TDTR [0]

mailbox data length control and time stamp register

Offset: 0x184, size: 32, reset: 0x00000000, access: read-write

1/3 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
TIME rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							TGT rw					DLC rw

Toggle fields

DLC

Bits 0-3: DLC.

Allowed values: 0x0-0x8

TGT

Bit 8: TGT.

TIME

Bits 16-31: TIME.

TDLR [0]

mailbox data low register

Offset: 0x188, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
DATA[3] rw								DATA[2] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DATA[1] rw								DATA[0] rw

Toggle fields

DATA[0]

Bits 0-7: DATA0.

DATA[1]

Bits 8-15: DATA1.

DATA[2]

Bits 16-23: DATA2.

DATA[3]

Bits 24-31: DATA3.

TDHR [0]

mailbox data high register

Offset: 0x18c, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
DATA[7] rw								DATA[6] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DATA[5] rw								DATA[4] rw

Toggle fields

DATA[4]

Bits 0-7: DATA4.

DATA[5]

Bits 8-15: DATA5.

DATA[6]

Bits 16-23: DATA6.

DATA[7]

Bits 24-31: DATA7.

TIR [1]

TX mailbox identifier register

Offset: 0x190, size: 32, reset: 0x00000000, access: read-write

2/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
STID rw											EXID rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
EXID rw													IDE rw	RTR rw	TXRQ rw

Toggle fields

TXRQ

Bit 0: TXRQ.

RTR

Bit 1: RTR.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

IDE

Bit 2: IDE.

Allowed values:
0: Standard: Standard identifier
1: Extended: Extended identifier

EXID

Bits 3-20: EXID.

STID

Bits 21-31: STID.

TDTR [1]

mailbox data length control and time stamp register

Offset: 0x194, size: 32, reset: 0x00000000, access: read-write

1/3 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
TIME rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							TGT rw					DLC rw

Toggle fields

DLC

Bits 0-3: DLC.

Allowed values: 0x0-0x8

TGT

Bit 8: TGT.

TIME

Bits 16-31: TIME.

TDLR [1]

mailbox data low register

Offset: 0x198, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
DATA[3] rw								DATA[2] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DATA[1] rw								DATA[0] rw

Toggle fields

DATA[0]

Bits 0-7: DATA0.

DATA[1]

Bits 8-15: DATA1.

DATA[2]

Bits 16-23: DATA2.

DATA[3]

Bits 24-31: DATA3.

TDHR [1]

mailbox data high register

Offset: 0x19c, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
DATA[7] rw								DATA[6] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DATA[5] rw								DATA[4] rw

Toggle fields

DATA[4]

Bits 0-7: DATA4.

DATA[5]

Bits 8-15: DATA5.

DATA[6]

Bits 16-23: DATA6.

DATA[7]

Bits 24-31: DATA7.

TIR [2]

TX mailbox identifier register

Offset: 0x1a0, size: 32, reset: 0x00000000, access: read-write

2/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
STID rw											EXID rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
EXID rw													IDE rw	RTR rw	TXRQ rw

Toggle fields

TXRQ

Bit 0: TXRQ.

RTR

Bit 1: RTR.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

IDE

Bit 2: IDE.

Allowed values:
0: Standard: Standard identifier
1: Extended: Extended identifier

EXID

Bits 3-20: EXID.

STID

Bits 21-31: STID.

TDTR [2]

mailbox data length control and time stamp register

Offset: 0x1a4, size: 32, reset: 0x00000000, access: read-write

1/3 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
TIME rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							TGT rw					DLC rw

Toggle fields

DLC

Bits 0-3: DLC.

Allowed values: 0x0-0x8

TGT

Bit 8: TGT.

TIME

Bits 16-31: TIME.

TDLR [2]

mailbox data low register

Offset: 0x1a8, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
DATA[3] rw								DATA[2] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DATA[1] rw								DATA[0] rw

Toggle fields

DATA[0]

Bits 0-7: DATA0.

DATA[1]

Bits 8-15: DATA1.

DATA[2]

Bits 16-23: DATA2.

DATA[3]

Bits 24-31: DATA3.

TDHR [2]

mailbox data high register

Offset: 0x1ac, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
DATA[7] rw								DATA[6] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DATA[5] rw								DATA[4] rw

Toggle fields

DATA[4]

Bits 0-7: DATA4.

DATA[5]

Bits 8-15: DATA5.

DATA[6]

Bits 16-23: DATA6.

DATA[7]

Bits 24-31: DATA7.

RIR [0]

receive FIFO mailbox identifier register

Offset: 0x1b0, size: 32, reset: 0x00000000, access: read-only

4/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
STID r											EXID r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
EXID r													IDE r	RTR r

Toggle fields

RTR

Bit 1: RTR.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

IDE

Bit 2: IDE.

Allowed values:
0: Standard: Standard identifier
1: Extended: Extended identifier

EXID

Bits 3-20: EXID.

STID

Bits 21-31: STID.

RDTR [0]

mailbox data high register

Offset: 0x1b4, size: 32, reset: 0x00000000, access: read-only

3/3 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
TIME r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FMI r												DLC r

Toggle fields

DLC

Bits 0-3: DLC.

Allowed values: 0x0-0x8

FMI

Bits 8-15: FMI.

TIME

Bits 16-31: TIME.

RDLR [0]

mailbox data high register

Offset: 0x1b8, size: 32, reset: 0x00000000, access: read-only

4/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
DATA[3] r								DATA[2] r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DATA[1] r								DATA[0] r

Toggle fields

DATA[0]

Bits 0-7: DATA0.

DATA[1]

Bits 8-15: DATA1.

DATA[2]

Bits 16-23: DATA2.

DATA[3]

Bits 24-31: DATA3.

RDHR [0]

receive FIFO mailbox data high register

Offset: 0x1bc, size: 32, reset: 0x00000000, access: read-only

4/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
DATA[7] r								DATA[6] r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DATA[5] r								DATA[4] r

Toggle fields

DATA[4]

Bits 0-7: DATA4.

DATA[5]

Bits 8-15: DATA5.

DATA[6]

Bits 16-23: DATA6.

DATA[7]

Bits 24-31: DATA7.

RIR [1]

receive FIFO mailbox identifier register

Offset: 0x1c0, size: 32, reset: 0x00000000, access: read-only

4/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
STID r											EXID r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
EXID r													IDE r	RTR r

Toggle fields

RTR

Bit 1: RTR.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

IDE

Bit 2: IDE.

Allowed values:
0: Standard: Standard identifier
1: Extended: Extended identifier

EXID

Bits 3-20: EXID.

STID

Bits 21-31: STID.

RDTR [1]

mailbox data high register

Offset: 0x1c4, size: 32, reset: 0x00000000, access: read-only

3/3 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
TIME r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FMI r												DLC r

Toggle fields

DLC

Bits 0-3: DLC.

Allowed values: 0x0-0x8

FMI

Bits 8-15: FMI.

TIME

Bits 16-31: TIME.

RDLR [1]

mailbox data high register

Offset: 0x1c8, size: 32, reset: 0x00000000, access: read-only

4/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
DATA[3] r								DATA[2] r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DATA[1] r								DATA[0] r

Toggle fields

DATA[0]

Bits 0-7: DATA0.

DATA[1]

Bits 8-15: DATA1.

DATA[2]

Bits 16-23: DATA2.

DATA[3]

Bits 24-31: DATA3.

RDHR [1]

receive FIFO mailbox data high register

Offset: 0x1cc, size: 32, reset: 0x00000000, access: read-only

4/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
DATA[7] r								DATA[6] r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DATA[5] r								DATA[4] r

Toggle fields

DATA[4]

Bits 0-7: DATA4.

DATA[5]

Bits 8-15: DATA5.

DATA[6]

Bits 16-23: DATA6.

DATA[7]

Bits 24-31: DATA7.

FMR

filter master register

Offset: 0x200, size: 32, reset: 0x2A1C0E01, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
															FINIT rw

Toggle fields

FINIT

Bit 0: Filter initialization mode.

FM1R

filter mode register

Offset: 0x204, size: 32, reset: 0x00000000, access: read-write

0/14 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		FBM[13] rw	FBM[12] rw	FBM[11] rw	FBM[10] rw	FBM[9] rw	FBM[8] rw	FBM[7] rw	FBM[6] rw	FBM[5] rw	FBM[4] rw	FBM[3] rw	FBM[2] rw	FBM[1] rw	FBM[0] rw

Toggle fields

FBM[0]

Bit 0: Filter mode.

FBM[1]

Bit 1: Filter mode.

FBM[2]

Bit 2: Filter mode.

FBM[3]

Bit 3: Filter mode.

FBM[4]

Bit 4: Filter mode.

FBM[5]

Bit 5: Filter mode.

FBM[6]

Bit 6: Filter mode.

FBM[7]

Bit 7: Filter mode.

FBM[8]

Bit 8: Filter mode.

FBM[9]

Bit 9: Filter mode.

FBM[10]

Bit 10: Filter mode.

FBM[11]

Bit 11: Filter mode.

FBM[12]

Bit 12: Filter mode.

FBM[13]

Bit 13: Filter mode.

FS1R

filter scale register

Offset: 0x20c, size: 32, reset: 0x00000000, access: read-write

0/14 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		FSC[13] rw	FSC[12] rw	FSC[11] rw	FSC[10] rw	FSC[9] rw	FSC[8] rw	FSC[7] rw	FSC[6] rw	FSC[5] rw	FSC[4] rw	FSC[3] rw	FSC[2] rw	FSC[1] rw	FSC[0] rw

Toggle fields

FSC[0]

Bit 0: Filter scale configuration.

FSC[1]

Bit 1: Filter scale configuration.

FSC[2]

Bit 2: Filter scale configuration.

FSC[3]

Bit 3: Filter scale configuration.

FSC[4]

Bit 4: Filter scale configuration.

FSC[5]

Bit 5: Filter scale configuration.

FSC[6]

Bit 6: Filter scale configuration.

FSC[7]

Bit 7: Filter scale configuration.

FSC[8]

Bit 8: Filter scale configuration.

FSC[9]

Bit 9: Filter scale configuration.

FSC[10]

Bit 10: Filter scale configuration.

FSC[11]

Bit 11: Filter scale configuration.

FSC[12]

Bit 12: Filter scale configuration.

FSC[13]

Bit 13: Filter scale configuration.

FFA1R

filter FIFO assignment register

Offset: 0x214, size: 32, reset: 0x00000000, access: read-write

0/14 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		FFA[13] rw	FFA[12] rw	FFA[11] rw	FFA[10] rw	FFA[9] rw	FFA[8] rw	FFA[7] rw	FFA[6] rw	FFA[5] rw	FFA[4] rw	FFA[3] rw	FFA[2] rw	FFA[1] rw	FFA[0] rw

Toggle fields

FFA[0]

Bit 0: Filter FIFO assignment for filter 0.

FFA[1]

Bit 1: Filter FIFO assignment for filter 1.

FFA[2]

Bit 2: Filter FIFO assignment for filter 2.

FFA[3]

Bit 3: Filter FIFO assignment for filter 3.

FFA[4]

Bit 4: Filter FIFO assignment for filter 4.

FFA[5]

Bit 5: Filter FIFO assignment for filter 5.

FFA[6]

Bit 6: Filter FIFO assignment for filter 6.

FFA[7]

Bit 7: Filter FIFO assignment for filter 7.

FFA[8]

Bit 8: Filter FIFO assignment for filter 8.

FFA[9]

Bit 9: Filter FIFO assignment for filter 9.

FFA[10]

Bit 10: Filter FIFO assignment for filter 10.

FFA[11]

Bit 11: Filter FIFO assignment for filter 11.

FFA[12]

Bit 12: Filter FIFO assignment for filter 12.

FFA[13]

Bit 13: Filter FIFO assignment for filter 13.

FA1R

filter activation register

Offset: 0x21c, size: 32, reset: 0x00000000, access: read-write

0/14 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		FACT[13] rw	FACT[12] rw	FACT[11] rw	FACT[10] rw	FACT[9] rw	FACT[8] rw	FACT[7] rw	FACT[6] rw	FACT[5] rw	FACT[4] rw	FACT[3] rw	FACT[2] rw	FACT[1] rw	FACT[0] rw

Toggle fields

FACT[0]

Bit 0: Filter active.

FACT[1]

Bit 1: Filter active.

FACT[2]

Bit 2: Filter active.

FACT[3]

Bit 3: Filter active.

FACT[4]

Bit 4: Filter active.

FACT[5]

Bit 5: Filter active.

FACT[6]

Bit 6: Filter active.

FACT[7]

Bit 7: Filter active.

FACT[8]

Bit 8: Filter active.

FACT[9]

Bit 9: Filter active.

FACT[10]

Bit 10: Filter active.

FACT[11]

Bit 11: Filter active.

FACT[12]

Bit 12: Filter active.

FACT[13]

Bit 13: Filter active.

FR1 [0]

Filter bank x register 1

Offset: 0x240, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [0]

Filter bank x register 2

Offset: 0x244, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [1]

Filter bank x register 1

Offset: 0x248, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [1]

Filter bank x register 2

Offset: 0x24c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [2]

Filter bank x register 1

Offset: 0x250, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [2]

Filter bank x register 2

Offset: 0x254, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [3]

Filter bank x register 1

Offset: 0x258, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [3]

Filter bank x register 2

Offset: 0x25c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [4]

Filter bank x register 1

Offset: 0x260, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [4]

Filter bank x register 2

Offset: 0x264, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [5]

Filter bank x register 1

Offset: 0x268, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [5]

Filter bank x register 2

Offset: 0x26c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [6]

Filter bank x register 1

Offset: 0x270, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [6]

Filter bank x register 2

Offset: 0x274, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [7]

Filter bank x register 1

Offset: 0x278, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [7]

Filter bank x register 2

Offset: 0x27c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [8]

Filter bank x register 1

Offset: 0x280, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [8]

Filter bank x register 2

Offset: 0x284, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [9]

Filter bank x register 1

Offset: 0x288, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [9]

Filter bank x register 2

Offset: 0x28c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [10]

Filter bank x register 1

Offset: 0x290, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [10]

Filter bank x register 2

Offset: 0x294, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [11]

Filter bank x register 1

Offset: 0x298, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [11]

Filter bank x register 2

Offset: 0x29c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [12]

Filter bank x register 1

Offset: 0x2a0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [12]

Filter bank x register 2

Offset: 0x2a4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [13]

Filter bank x register 1

Offset: 0x2a8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [13]

Filter bank x register 2

Offset: 0x2ac, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [14]

Filter bank x register 1

Offset: 0x2b0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [14]

Filter bank x register 2

Offset: 0x2b4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [15]

Filter bank x register 1

Offset: 0x2b8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [15]

Filter bank x register 2

Offset: 0x2bc, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [16]

Filter bank x register 1

Offset: 0x2c0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [16]

Filter bank x register 2

Offset: 0x2c4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [17]

Filter bank x register 1

Offset: 0x2c8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [17]

Filter bank x register 2

Offset: 0x2cc, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [18]

Filter bank x register 1

Offset: 0x2d0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [18]

Filter bank x register 2

Offset: 0x2d4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [19]

Filter bank x register 1

Offset: 0x2d8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [19]

Filter bank x register 2

Offset: 0x2dc, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [20]

Filter bank x register 1

Offset: 0x2e0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [20]

Filter bank x register 2

Offset: 0x2e4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [21]

Filter bank x register 1

Offset: 0x2e8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [21]

Filter bank x register 2

Offset: 0x2ec, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [22]

Filter bank x register 1

Offset: 0x2f0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [22]

Filter bank x register 2

Offset: 0x2f4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [23]

Filter bank x register 1

Offset: 0x2f8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [23]

Filter bank x register 2

Offset: 0x2fc, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [24]

Filter bank x register 1

Offset: 0x300, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [24]

Filter bank x register 2

Offset: 0x304, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [25]

Filter bank x register 1

Offset: 0x308, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [25]

Filter bank x register 2

Offset: 0x30c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [26]

Filter bank x register 1

Offset: 0x310, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [26]

Filter bank x register 2

Offset: 0x314, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR1 [27]

Filter bank x register 1

Offset: 0x318, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

FR2 [27]

Filter bank x register 2

Offset: 0x31c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FB rw

Toggle fields

FB

Bits 0-31: Filter bits.

COMP

0x40010200: Comparator

21/23 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	COMP1_CSR	LOCK	VALUE							SCALEN	BRGEN		BLANKING			HYST		POLARITY								INPSEL	INMSEL			PWRMODE			EN
0x4	COMP2_CSR	LOCK	VALUE							SCALEN	BRGEN		BLANKING			HYST		POLARITY						WINMODE		INPSEL	INMSEL			PWRMODE			EN

Toggle registers

COMP1_CSR

Comparator 1 control and status register

Offset: 0x0, size: 32, reset: 0x00000000, access: Unspecified

10/11 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
LOCK w	VALUE r							SCALEN rw	BRGEN rw		BLANKING rw			HYST rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
POLARITY rw								INPSEL rw	INMSEL rw			PWRMODE rw			EN rw

Toggle fields

EN

Bit 0: Comparator 1 enable bit.

Allowed values:
0: Disabled: Comparator 1 disabled
1: Enabled: Comparator 1 enabled

PWRMODE

Bits 2-3: Power Mode of the comparator 1.

Allowed values:
0: HighSpeed: High speed / full power
1: MediumSpeed: Medium speed / medium power
3: LowSpeed: Low speed / ultra-low power

INMSEL

Bits 4-6: Comparator 1 Input Minus connection configuration bit.

Allowed values:
0: OneQuarterVRef: 1/4 of VRefint
1: OneHalfVRef: 1/2 of VRefint
2: ThreeQuarterVRef: 3/4 of VRefint
3: VRef: VRefint
4: DAC_CH1: DAC Channel 1
5: DAC_CH2: DAC Channel 2
6: PC4: PC4

INPSEL

Bit 7: Comparator1 input plus selection bit.

Allowed values:
0: PC5: PC5 connected to input plus
1: PB2: PB2 connected to input plus

POLARITY

Bit 15: Comparator 1 polarity selection bit.

Allowed values:
0: NotInverted: Output is not inverted
1: Inverted: Output is inverted

HYST

Bits 16-17: Comparator 1 hysteresis selection bits.

Allowed values:
0: NoHysteresis: No hysteresis
1: LowHysteresis: Low hysteresis
2: MediumHysteresis: Medium hysteresis
3: HighHysteresis: High hysteresis

BLANKING

Bits 18-20: Comparator 1 blanking source selection bits.

Allowed values:
0: NoBlanking: No blanking
4: TIM1OC5: TIM15 OC1 selected as blanking source

BRGEN

Bit 22: Scaler bridge enable.

Allowed values:
0: Disabled: Scaler resistor bridge disabled
1: Enabled: Scaler resistor bridge enabled

SCALEN

Bit 23: Voltage scaler enable bit.

Allowed values:
0: Disabled: Voltage scaler disabled
1: Enabled: Voltage scaler enabled

VALUE

Bit 30: Comparator 1 output status bit.

Allowed values:
0: Low: Comparator output is low
1: High: Comparator output is high

LOCK

Bit 31: COMP1_CSR register lock bit.

COMP2_CSR

Comparator 2 control and status register

Offset: 0x4, size: 32, reset: 0x00000000, access: Unspecified

11/12 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
LOCK w	VALUE r							SCALEN rw	BRGEN rw		BLANKING rw			HYST rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
POLARITY rw						WINMODE rw		INPSEL rw	INMSEL rw			PWRMODE rw			EN rw

Toggle fields

EN

Bit 0: Comparator 2 enable bit.

Allowed values:
0: Disabled: Comparator 1 disabled
1: Enabled: Comparator 1 enabled

PWRMODE

Bits 2-3: Power Mode of the comparator 2.

Allowed values:
0: HighSpeed: High speed / full power
1: MediumSpeed: Medium speed / medium power
3: LowSpeed: Low speed / ultra-low power

INMSEL

Bits 4-6: Comparator 2 Input Minus connection configuration bit.

Allowed values:
0: OneQuarterVRef: 1/4 of VRefint
1: OneHalfVRef: 1/2 of VRefint
2: ThreeQuarterVRef: 3/4 of VRefint
3: VRef: VRefint
4: DAC_CH1: DAC Channel 1
5: DAC_CH2: DAC Channel 2
6: PB3: PB3
7: PB7: PB7

INPSEL

Bit 7: Comparator 2 Input Plus connection configuration bit.

Allowed values:
0: PB4: PB4 connected to input plus
1: PB6: PB6 connected to input plus

WINMODE

Bit 9: Windows mode selection bit.

Allowed values:
0: Disabled: COMP2 input plus is not connected to COMP1
1: Enabled: COMP2 input plus is connected to COMP1 plus

POLARITY

Bit 15: Comparator 2 polarity selection bit.

Allowed values:
0: NotInverted: Output is not inverted
1: Inverted: Output is inverted

HYST

Bits 16-17: Comparator 2 hysteresis selection bits.

Allowed values:
0: NoHysteresis: No hysteresis
1: LowHysteresis: Low hysteresis
2: MediumHysteresis: Medium hysteresis
3: HighHysteresis: High hysteresis

BLANKING

Bits 18-20: Comparator 2 blanking source selection bits.

Allowed values:
0: NoBlanking: No blanking
4: TIM1OC5: TIM15 OC1 selected as blanking source

BRGEN

Bit 22: Scaler bridge enable.

Allowed values:
0: Disabled: Scaler resistor bridge disabled
1: Enabled: Scaler resistor bridge enabled

SCALEN

Bit 23: Voltage scaler enable bit.

Allowed values:
0: Disabled: Voltage scaler disabled
1: Enabled: Voltage scaler enabled

VALUE

Bit 30: Comparator 2 output status bit.

Allowed values:
0: Low: Comparator output is low
1: High: Comparator output is high

LOCK

Bit 31: COMP2_CSR register lock bit.

CRC

0x40023000: Cyclic redundancy check calculation unit

10/10 fields covered.

Toggle register map

Offset	Name	31	15	7	6	4	0
0x0	DR	DR	DR
0x0 (16-bit)	DR16		DR16
0x0 (8-bit)	DR8			DR8
0x4	IDR			IDR
0x8	CR			REV_OUT	REV_IN	POLYSIZE	RESET
0x10	INIT	INIT	INIT
0x14	POL	POL	POL

Toggle registers

DR

Data register

Offset: 0x0, size: 32, reset: 0xFFFFFFFF, access: read-write

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
DR rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DR rw

Toggle fields

DR

Bits 0-31: Data register bits.

Allowed values: 0x0-0xffffffff

DR16

Data register - half-word sized

Offset: 0x0, size: 16, reset: 0x0000FFFF, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DR16 rw

Toggle fields

DR16

Bits 0-15: Data register bits.

Allowed values: 0x0-0xffff

DR8

Data register - byte sized

Offset: 0x0, size: 8, reset: 0x000000FF, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								DR8 rw

Toggle fields

DR8

Bits 0-7: Data register bits.

Allowed values: 0x0-0xff

IDR

Independent data register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								IDR rw

Toggle fields

IDR

Bits 0-7: General-purpose 8-bit data register bits.

Allowed values: 0x0-0xff

CR

Control register

Offset: 0x8, size: 32, reset: 0x00000000, access: Unspecified

4/4 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								REV_OUT rw	REV_IN rw		POLYSIZE rw				RESET w

Toggle fields

RESET

Bit 0: RESET bit.

Allowed values:
1: Reset: Resets the CRC calculation unit and sets the data register to 0xFFFF FFFF

POLYSIZE

Bits 3-4: Polynomial size.

Allowed values:
0: Polysize32: 32-bit polynomial
1: Polysize16: 16-bit polynomial
2: Polysize8: 8-bit polynomial
3: Polysize7: 7-bit polynomial

REV_IN

Bits 5-6: Reverse input data.

Allowed values:
0: Normal: Bit order not affected
1: Byte: Bit reversal done by byte
2: HalfWord: Bit reversal done by half-word
3: Word: Bit reversal done by word

REV_OUT

Bit 7: Reverse output data.

Allowed values:
0: Normal: Bit order not affected
1: Reversed: Bit reversed output

INIT

Initial CRC value

Offset: 0x10, size: 32, reset: 0xFFFFFFFF, access: read-write

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
INIT rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
INIT rw

Toggle fields

INIT

Bits 0-31: Programmable initial CRC value.

Allowed values: 0x0-0xffffffff

POL

polynomial

Offset: 0x14, size: 32, reset: 0x04C11DB7, access: read-write

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
POL rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
POL rw

Toggle fields

POL

Bits 0-31: Programmable polynomial.

Allowed values: 0x0-0xffffffff

CRS

0x40006000: Clock recovery system

9/26 fields covered.

Toggle register map

Offset	Name	31	29	26	23	15	13	10	9	8	7	6	5	3	2	1	0
0x0	CR						TRIM				SWSYNC	AUTOTRIMEN	CEN	ESYNCIE	ERRIE	SYNCWARNIE	SYNCOKIE
0x4	CFGR	SYNCPOL	SYNCSRC	SYNCDIV	FELIM	RELOAD
0x8	ISR	FECAP				FEDIR		TRIMOVF	SYNCMISS	SYNCERR				ESYNCF	ERRF	SYNCWARNF	SYNCOKF
0xc	ICR													ESYNCC	ERRC	SYNCWARNC	SYNCOKC

Toggle registers

CR

control register

Offset: 0x0, size: 32, reset: 0x00002000, access: read-write

0/8 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		TRIM rw						SWSYNC rw	AUTOTRIMEN rw	CEN rw		ESYNCIE rw	ERRIE rw	SYNCWARNIE rw	SYNCOKIE rw

Toggle fields

SYNCOKIE

Bit 0: SYNC event OK interrupt enable.

SYNCWARNIE

Bit 1: SYNC warning interrupt enable.

ERRIE

Bit 2: Synchronization or trimming error interrupt enable.

ESYNCIE

Bit 3: Expected SYNC interrupt enable.

CEN

Bit 5: Frequency error counter enable.

AUTOTRIMEN

Bit 6: Automatic trimming enable.

SWSYNC

Bit 7: Generate software SYNC event.

TRIM

Bits 8-13: HSI48 oscillator smooth trimming.

CFGR

configuration register

Offset: 0x4, size: 32, reset: 0x2022BB7F, access: read-write

0/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
SYNCPOL rw		SYNCSRC rw			SYNCDIV rw			FELIM rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RELOAD rw

Toggle fields

RELOAD

Bits 0-15: Counter reload value.

FELIM

Bits 16-23: Frequency error limit.

SYNCDIV

Bits 24-26: SYNC divider.

SYNCSRC

Bits 28-29: SYNC signal source selection.

SYNCPOL

Bit 31: SYNC polarity selection.

ISR

interrupt and status register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-only

9/9 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FECAP r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FEDIR r					TRIMOVF r	SYNCMISS r	SYNCERR r					ESYNCF r	ERRF r	SYNCWARNF r	SYNCOKF r

Toggle fields

SYNCOKF

Bit 0: SYNC event OK flag.

SYNCWARNF

Bit 1: SYNC warning flag.

ERRF

Bit 2: Error flag.

ESYNCF

Bit 3: Expected SYNC flag.

SYNCERR

Bit 8: SYNC error.

SYNCMISS

Bit 9: SYNC missed.

TRIMOVF

Bit 10: Trimming overflow or underflow.

FEDIR

Bit 15: Frequency error direction.

FECAP

Bits 16-31: Frequency error capture.

ICR

interrupt flag clear register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
												ESYNCC rw	ERRC rw	SYNCWARNC rw	SYNCOKC rw

Toggle fields

SYNCOKC

Bit 0: SYNC event OK clear flag.

SYNCWARNC

Bit 1: SYNC warning clear flag.

ERRC

Bit 2: Error clear flag.

ESYNCC

Bit 3: Expected SYNC clear flag.

DAC

0x40007400: Digital-to-analog converter

48/48 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	25	23	21	20	18	16	15	14	13	12	11	9	7	5	4	2	1	0
0x0	CR		CEN2	DMAUDRIE2	DMAEN2	MAMP2		WAVE2	TSEL2		TEN2	EN2		CEN1	DMAUDRIE1	DMAEN1	MAMP1		WAVE1	TSEL1		TEN1		EN1
0x4	SWTRIGR																						SWTRIG2	SWTRIG1
0x8	DHR12R1																DACC1DHR
0xc	DHR12L1												DACC1DHR
0x10	DHR8R1																		DACC1DHR
0x14	DHR12R2																DACC2DHR
0x18	DHR12L2												DACC2DHR
0x1c	DHR8R2																		DACC2DHR
0x20	DHR12RD					DACC2DHR											DACC1DHR
0x24	DHR12LD	DACC2DHR											DACC1DHR
0x28	DHR8RD												DACC2DHR						DACC1DHR
0x2c	DOR1																DACC1DOR
0x30	DOR2																DACC2DOR
0x34	SR	BWST2	CAL_FLAG2	DMAUDR2									BWST1	CAL_FLAG1	DMAUDR1
0x38	CCR									OTRIM2											OTRIM1
0x3c	MCR										MODE2											MODE1
0x40	SHSR1																	TSAMPLE1
0x44	SHSR2																	TSAMPLE2
0x48	SHHR						THOLD2											THOLD1
0x4c	SHRR							TREFRESH2											TREFRESH1

Toggle registers

CR

control register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
	CEN2 rw	DMAUDRIE2 rw	DMAEN2 rw	MAMP2 rw				WAVE2 rw		TSEL2 rw			TEN2 rw		EN2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	CEN1 rw	DMAUDRIE1 rw	DMAEN1 rw	MAMP1 rw				WAVE1 rw		TSEL1 rw			TEN1 rw		EN1 rw

Toggle fields

EN1

Bit 0: DAC channel1 enable.

Allowed values:
0: Disabled: DAC Channel X disabled
1: Enabled: DAC Channel X enabled

TEN1

Bit 2: DAC channel1 trigger enable.

Allowed values:
0: Disabled: DAC Channel X trigger disabled
1: Enabled: DAC Channel X trigger enabled

TSEL1

Bits 3-5: DAC channel1 trigger selection.

Allowed values:
0: TIM6_TRGO: TIM6_TRGO event trigger for DAC conversion, if TEN is enabled
1: TIM8_TRGO: TIM8_TRGO
2: TIM7_TRGO: TIM7_TRGO (Note: Reserved on STM32L45xxx and STM32L46xxx devices)
3: TIM5_TRGO: TIM5_TRGO
4: TIM2_TRGO: TIM2_TRGO
5: TIM4_TRGO: TIM4_TRGO
6: EXTI9: External pin
7: SWTRIG: Software triger

WAVE1

Bits 6-7: DAC channel1 noise/triangle wave generation enable.

Allowed values:
0: Disabled: Wave generation disabled
1: Noise: Noise wave generation enabled
2: Triangle: Triangle wave generation enabled

MAMP1

Bits 8-11: DAC channel1 mask/amplitude selector.

Allowed values:
0: Amp1: Unmask bit0 of LFSR/ triangle amplitude equal to 1
1: Amp3: Unmask bits[1:0] of LFSR/ triangle amplitude equal to 3
2: Amp7: Unmask bits[2:0] of LFSR/ triangle amplitude equal to 7
3: Amp15: Unmask bits[3:0] of LFSR/ triangle amplitude equal to 15
4: Amp31: Unmask bits[4:0] of LFSR/ triangle amplitude equal to 31
5: Amp63: Unmask bits[5:0] of LFSR/ triangle amplitude equal 63
6: Amp127: Unmask bits[6:0] of LFSR/ triangle amplitude equal to 127
7: Amp255: Unmask bits[7:0] of LFSR/ triangle amplitude equal to 255
8: Amp511: Unmask bits[8:0] of LFSR/ triangle amplitude equal to 511
9: Amp1023: Unmask bits[9:0] of LFSR/ triangle amplitude equal to 1023
10: Amp2047: Unmask bits[10:0] of LFSR/ triangle amplitude equal to 2047
11: Amp4095: Unmask bits[11:0] of LFSR/ triangle amplitude equal to 4095

DMAEN1

Bit 12: DAC channel1 DMA enable.

Allowed values:
0: Disabled: DAC Channel X DMA mode disabled
1: Enabled: DAC Channel X DMA mode enabled

DMAUDRIE1

Bit 13: DAC channel1 DMA Underrun Interrupt enable.

Allowed values:
0: Disabled: DAC Channel X DMA Underrun Interrupt disabled
1: Enabled: DAC Channel X DMA Underrun Interrupt enabled

CEN1

Bit 14: DAC Channel 1 calibration enable.

Allowed values:
0: Normal: DAC Channel X Normal operating mode
1: Calibration: DAC Channel X calibration mode

EN2

Bit 16: DAC channel2 enable.

Allowed values:
0: Disabled: DAC Channel X disabled
1: Enabled: DAC Channel X enabled

TEN2

Bit 18: DAC channel2 trigger enable.

Allowed values:
0: Disabled: DAC Channel X trigger disabled
1: Enabled: DAC Channel X trigger enabled

TSEL2

Bits 19-21: DAC channel2 trigger selection.

Allowed values:
0: TIM6_TRGO: TIM6_TRGO event trigger for DAC conversion, if TEN is enabled
1: TIM8_TRGO: TIM8_TRGO
2: TIM7_TRGO: TIM7_TRGO (Note: Reserved on STM32L45xxx and STM32L46xxx devices)
3: TIM5_TRGO: TIM5_TRGO
4: TIM2_TRGO: TIM2_TRGO
5: TIM4_TRGO: TIM4_TRGO
6: EXTI9: External pin
7: SWTRIG: Software triger

WAVE2

Bits 22-23: DAC channel2 noise/triangle wave generation enable.

Allowed values:
0: Disabled: Wave generation disabled
1: Noise: Noise wave generation enabled
2: Triangle: Triangle wave generation enabled

MAMP2

Bits 24-27: DAC channel2 mask/amplitude selector.

Allowed values:
0: Amp1: Unmask bit0 of LFSR/ triangle amplitude equal to 1
1: Amp3: Unmask bits[1:0] of LFSR/ triangle amplitude equal to 3
2: Amp7: Unmask bits[2:0] of LFSR/ triangle amplitude equal to 7
3: Amp15: Unmask bits[3:0] of LFSR/ triangle amplitude equal to 15
4: Amp31: Unmask bits[4:0] of LFSR/ triangle amplitude equal to 31
5: Amp63: Unmask bits[5:0] of LFSR/ triangle amplitude equal 63
6: Amp127: Unmask bits[6:0] of LFSR/ triangle amplitude equal to 127
7: Amp255: Unmask bits[7:0] of LFSR/ triangle amplitude equal to 255
8: Amp511: Unmask bits[8:0] of LFSR/ triangle amplitude equal to 511
9: Amp1023: Unmask bits[9:0] of LFSR/ triangle amplitude equal to 1023
10: Amp2047: Unmask bits[10:0] of LFSR/ triangle amplitude equal to 2047
11: Amp4095: Unmask bits[11:0] of LFSR/ triangle amplitude equal to 4095

DMAEN2

Bit 28: DAC channel2 DMA enable.

Allowed values:
0: Disabled: DAC Channel X DMA mode disabled
1: Enabled: DAC Channel X DMA mode enabled

DMAUDRIE2

Bit 29: DAC channel2 DMA underrun interrupt enable.

Allowed values:
0: Disabled: DAC Channel X DMA Underrun Interrupt disabled
1: Enabled: DAC Channel X DMA Underrun Interrupt enabled

CEN2

Bit 30: DAC Channel 2 calibration enable.

Allowed values:
0: Normal: DAC Channel X Normal operating mode
1: Calibration: DAC Channel X calibration mode

SWTRIGR

software trigger register

Offset: 0x4, size: 32, reset: 0x00000000, access: write-only

2/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
														SWTRIG2 w	SWTRIG1 w

Toggle fields

SWTRIG1

Bit 0: DAC channel1 software trigger.

Allowed values:
0: NoTrigger: No trigger
1: Trigger: Trigger

SWTRIG2

Bit 1: DAC channel2 software trigger.

Allowed values:
0: NoTrigger: No trigger
1: Trigger: Trigger

DHR12R1

channel1 12-bit right-aligned data holding register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				DACC1DHR rw

Toggle fields

DACC1DHR

Bits 0-11: DAC channel1 12-bit right-aligned data.

Allowed values: 0x0-0xfff

DHR12L1

channel1 12-bit left-aligned data holding register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DACC1DHR rw

Toggle fields

DACC1DHR

Bits 4-15: DAC channel1 12-bit left-aligned data.

Allowed values: 0x0-0xfff

DHR8R1

channel1 8-bit right-aligned data holding register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								DACC1DHR rw

Toggle fields

DACC1DHR

Bits 0-7: DAC channel1 8-bit right-aligned data.

Allowed values: 0x0-0xff

DHR12R2

channel2 12-bit right aligned data holding register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				DACC2DHR rw

Toggle fields

DACC2DHR

Bits 0-11: DAC channel2 12-bit right-aligned data.

Allowed values: 0x0-0xfff

DHR12L2

channel2 12-bit left aligned data holding register

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DACC2DHR rw

Toggle fields

DACC2DHR

Bits 4-15: DAC channel2 12-bit left-aligned data.

Allowed values: 0x0-0xfff

DHR8R2

channel2 8-bit right-aligned data holding register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								DACC2DHR rw

Toggle fields

DACC2DHR

Bits 0-7: DAC channel2 8-bit right-aligned data.

Allowed values: 0x0-0xff

DHR12RD

Dual DAC 12-bit right-aligned data holding register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
				DACC2DHR rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				DACC1DHR rw

Toggle fields

DACC1DHR

Bits 0-11: DAC channel1 12-bit right-aligned data.

Allowed values: 0x0-0xfff

DACC2DHR

Bits 16-27: DAC channel2 12-bit right-aligned data.

Allowed values: 0x0-0xfff

DHR12LD

DUAL DAC 12-bit left aligned data holding register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
DACC2DHR rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DACC1DHR rw

Toggle fields

DACC1DHR

Bits 4-15: DAC channel1 12-bit left-aligned data.

Allowed values: 0x0-0xfff

DACC2DHR

Bits 20-31: DAC channel2 12-bit left-aligned data.

Allowed values: 0x0-0xfff

DHR8RD

DUAL DAC 8-bit right aligned data holding register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DACC2DHR rw								DACC1DHR rw

Toggle fields

DACC1DHR

Bits 0-7: DAC channel1 8-bit right-aligned data.

Allowed values: 0x0-0xff

DACC2DHR

Bits 8-15: DAC channel2 8-bit right-aligned data.

Allowed values: 0x0-0xff

DOR1

channel1 data output register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				DACC1DOR r

Toggle fields

DACC1DOR

Bits 0-11: DAC channel1 data output.

Allowed values: 0x0-0xfff

DOR2

channel2 data output register

Offset: 0x30, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				DACC2DOR r

Toggle fields

DACC2DOR

Bits 0-11: DAC channel2 data output.

Allowed values: 0x0-0xfff

SR

status register

Offset: 0x34, size: 32, reset: 0x00000000, access: Unspecified

6/6 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BWST2 r	CAL_FLAG2 r	DMAUDR2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BWST1 r	CAL_FLAG1 r	DMAUDR1 rw

Toggle fields

DMAUDR1

Bit 13: DAC channel1 DMA underrun flag.

Allowed values:
0: NoError: No DMA underrun error condition occurred for DAC channel x
1: Error: DMA underrun error condition occurred for DAC channel x (the currently selected trigger is driving DAC channel1 conversion at a frequency higher than the DMA service capability rate)

CAL_FLAG1

Bit 14: DAC Channel 1 calibration offset status.

Allowed values:
0: Lower: Calibration trimming value is lower than the offset correction value
1: Equal_Higher: Calibration trimming value is equal or greater than the offset correction value

BWST1

Bit 15: DAC Channel 1 busy writing sample time flag.

Allowed values:
0: Idle: There is no write operation of DAC_SHSR1 ongoing: DAC_SHSR1 can be written
1: Busy: There is a write operation of DAC_SHSR1 ongoing: DAC_SHSR1 cannot be written

DMAUDR2

Bit 29: DAC channel2 DMA underrun flag.

Allowed values:
0: NoError: No DMA underrun error condition occurred for DAC channel x
1: Error: DMA underrun error condition occurred for DAC channel x (the currently selected trigger is driving DAC channel1 conversion at a frequency higher than the DMA service capability rate)

CAL_FLAG2

Bit 30: DAC Channel 2 calibration offset status.

Allowed values:
0: Lower: Calibration trimming value is lower than the offset correction value
1: Equal_Higher: Calibration trimming value is equal or greater than the offset correction value

BWST2

Bit 31: DAC Channel 2 busy writing sample time flag.

Allowed values:
0: Idle: There is no write operation of DAC_SHSR1 ongoing: DAC_SHSR1 can be written
1: Busy: There is a write operation of DAC_SHSR1 ongoing: DAC_SHSR1 cannot be written

CCR

calibration control register

Offset: 0x38, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
											OTRIM2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
											OTRIM1 rw

Toggle fields

OTRIM1

Bits 0-4: DAC Channel 1 offset trimming value.

Allowed values: 0x0-0x1f

OTRIM2

Bits 16-20: DAC Channel 2 offset trimming value.

Allowed values: 0x0-0x1f

MCR

mode control register

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
													MODE2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
													MODE1 rw

Toggle fields

MODE1

Bits 0-2: DAC Channel 1 mode.

Allowed values:
0: NormalPinBuffer: Normal mode - DAC channelx is connected to external pin with Buffer enabled
1: NormalPinChipBuffer: Normal mode - DAC channelx is connected to external pin and to on chip peripherals with Buffer enabled
2: NormalPinNoBuffer: Normal mode - DAC channelx is connected to external pin with Buffer disabled
3: NormalChipNoBuffer: Normal mode - DAC channelx is connected to on chip peripherals with Buffer disabled
4: SHPinBuffer: S&H mode - DAC channelx is connected to external pin with Buffer enabled
5: SHPinChipBuffer: S&H mode - DAC channelx is connected to external pin and to on chip peripherals with Buffer enabled
6: SHPinNoBuffer: S&H mode - DAC channelx is connected to external pin and to on chip peripherals with Buffer disabled
7: SHChipNoBuffer: S&H mode - DAC channelx is connected to on chip peripherals with Buffer disabled

MODE2

Bits 16-18: DAC Channel 2 mode.

Allowed values:
0: NormalPinBuffer: Normal mode - DAC channelx is connected to external pin with Buffer enabled
1: NormalPinChipBuffer: Normal mode - DAC channelx is connected to external pin and to on chip peripherals with Buffer enabled
2: NormalPinNoBuffer: Normal mode - DAC channelx is connected to external pin with Buffer disabled
3: NormalChipNoBuffer: Normal mode - DAC channelx is connected to on chip peripherals with Buffer disabled
4: SHPinBuffer: S&H mode - DAC channelx is connected to external pin with Buffer enabled
5: SHPinChipBuffer: S&H mode - DAC channelx is connected to external pin and to on chip peripherals with Buffer enabled
6: SHPinNoBuffer: S&H mode - DAC channelx is connected to external pin and to on chip peripherals with Buffer disabled
7: SHChipNoBuffer: S&H mode - DAC channelx is connected to on chip peripherals with Buffer disabled

SHSR1

Sample and Hold sample time register 1

Offset: 0x40, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
						TSAMPLE1 rw

Toggle fields

TSAMPLE1

Bits 0-9: DAC Channel 1 sample Time.

Allowed values: 0x0-0x3ff

SHSR2

Sample and Hold sample time register 2

Offset: 0x44, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
						TSAMPLE2 rw

Toggle fields

TSAMPLE2

Bits 0-9: DAC Channel 2 sample Time.

Allowed values: 0x0-0x3ff

SHHR

Sample and Hold hold time register

Offset: 0x48, size: 32, reset: 0x00010001, access: read-write

2/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
						THOLD2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
						THOLD1 rw

Toggle fields

THOLD1

Bits 0-9: DAC Channel 1 hold Time.

Allowed values: 0x0-0x3ff

THOLD2

Bits 16-25: DAC Channel 2 hold time.

Allowed values: 0x0-0x3ff

SHRR

Sample and Hold refresh time register

Offset: 0x4c, size: 32, reset: 0x00000001, access: read-write

2/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								TREFRESH2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								TREFRESH1 rw

Toggle fields

TREFRESH1

Bits 0-7: DAC Channel 1 refresh Time.

Allowed values: 0x0-0xff

TREFRESH2

Bits 16-23: DAC Channel 2 refresh Time.

Allowed values: 0x0-0xff

DBGMCU

0xe0042000: MCU debug component

2/22 fields covered.

Toggle register map

Offset	Name	31	25	23	22	21	17	16	12	11	10	7	5	4	2	1	0
0x0	IDCODE	REV_ID								DEV_ID
0x4	CR											TRACE_MODE	TRACE_IOEN		DBG_STANDBY	DBG_STOP	DBG_SLEEP
0x8	APB1FZR1	DBG_LPTIM1_STOP	DBG_CAN_STOP	DBG_I2C3_STOP	DBG_I2C2_STOP	DBG_I2C1_STOP			DBG_IWDG_STOP	DBG_WWDG_STOP	DBG_RTC_STOP		DBG_TIM7_STOP	DBG_TIM6_STOP			DBG_TIM2_STOP
0xc	APB1FZR2												DBG_LPTIM2_STOP
0x10	APB2FZR						DBG_TIM16_STOP	DBG_TIM15_STOP		DBG_TIM1_STOP

Toggle registers

IDCODE

DBGMCU_IDCODE

Offset: 0x0, size: 32, reset: 0x00000000, access: read-only

2/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
REV_ID r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				DEV_ID r

Toggle fields

DEV_ID

Bits 0-11: Device identifier.

REV_ID

Bits 16-31: Revision identifie.

CR

Debug MCU configuration register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

0/5 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								TRACE_MODE rw		TRACE_IOEN rw			DBG_STANDBY rw	DBG_STOP rw	DBG_SLEEP rw

Toggle fields

DBG_SLEEP

Bit 0: Debug Sleep mode.

DBG_STOP

Bit 1: Debug Stop mode.

DBG_STANDBY

Bit 2: Debug Standby mode.

TRACE_IOEN

Bit 5: Trace pin assignment control.

TRACE_MODE

Bits 6-7: Trace pin assignment control.

APB1FZR1

Debug MCU APB1 freeze register1

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/11 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
DBG_LPTIM1_STOP rw						DBG_CAN_STOP rw		DBG_I2C3_STOP rw	DBG_I2C2_STOP rw	DBG_I2C1_STOP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			DBG_IWDG_STOP rw	DBG_WWDG_STOP rw	DBG_RTC_STOP rw					DBG_TIM7_STOP rw	DBG_TIM6_STOP rw				DBG_TIM2_STOP rw

Toggle fields

DBG_TIM2_STOP

Bit 0: TIM2 counter stopped when core is halted.

DBG_TIM6_STOP

Bit 4: TIM6 counter stopped when core is halted.

DBG_TIM7_STOP

Bit 5: TIM7 counter stopped when core is halted.

DBG_RTC_STOP

Bit 10: RTC counter stopped when core is halted.

DBG_WWDG_STOP

Bit 11: Window watchdog counter stopped when core is halted.

DBG_IWDG_STOP

Bit 12: Independent watchdog counter stopped when core is halted.

DBG_I2C1_STOP

Bit 21: I2C1 SMBUS timeout counter stopped when core is halted.

DBG_I2C2_STOP

Bit 22: I2C2 SMBUS timeout counter stopped when core is halted.

DBG_I2C3_STOP

Bit 23: I2C3 SMBUS timeout counter stopped when core is halted.

DBG_CAN_STOP

Bit 25: bxCAN stopped when core is halted.

DBG_LPTIM1_STOP

Bit 31: LPTIM1 counter stopped when core is halted.

APB1FZR2

Debug MCU APB1 freeze register 2

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
										DBG_LPTIM2_STOP rw

Toggle fields

DBG_LPTIM2_STOP

Bit 5: LPTIM2 counter stopped when core is halted.

APB2FZR

Debug MCU APB2 freeze register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
														DBG_TIM16_STOP rw	DBG_TIM15_STOP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				DBG_TIM1_STOP rw

Toggle fields

DBG_TIM1_STOP

Bit 11: TIM1 counter stopped when core is halted.

DBG_TIM15_STOP

Bit 16: TIM15 counter stopped when core is halted.

DBG_TIM16_STOP

Bit 17: TIM16 counter stopped when core is halted.

DMA1

0x40020000: Direct memory access controller

154/168 fields covered.

Toggle register map

Offset	Name	31	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	ISR		TEIF[7]	HTIF[7]	TCIF[7]	GIF[7]	TEIF[6]	HTIF[6]	TCIF[6]	GIF[6]	TEIF[5]	HTIF[5]	TCIF[5]	GIF[5]	TEIF[4]	HTIF[4]	TCIF[4]	GIF[4]	TEIF[3]	HTIF[3]	TCIF[3]	GIF[3]	TEIF[2]	HTIF[2]	TCIF[2]	GIF[2]	TEIF[1]	HTIF[1]	TCIF[1]	GIF[1]
0x4	IFCR		CTEIF[7]	CHTIF[7]	CTCIF[7]	CGIF[7]	CTEIF[6]	CHTIF[6]	CTCIF[6]	CGIF[6]	CTEIF[5]	CHTIF[5]	CTCIF[5]	CGIF[5]	CTEIF[4]	CHTIF[4]	CTCIF[4]	CGIF[4]	CTEIF[3]	CHTIF[3]	CTCIF[3]	CGIF[3]	CTEIF[2]	CHTIF[2]	CTCIF[2]	CGIF[2]	CTEIF[1]	CHTIF[1]	CTCIF[1]	CGIF[1]
0x8	CR [1]															MEM2MEM	PL		MSIZE		PSIZE		MINC	PINC	CIRC	DIR	TEIE	HTIE	TCIE	EN
0xc	NDTR [1]														NDT
0x10	PAR [1]	PA													PA
0x14	MAR [1]	MA													MA
0x1c	CR [2]															MEM2MEM	PL		MSIZE		PSIZE		MINC	PINC	CIRC	DIR	TEIE	HTIE	TCIE	EN
0x20	NDTR [2]														NDT
0x24	PAR [2]	PA													PA
0x28	MAR [2]	MA													MA
0x30	CR [3]															MEM2MEM	PL		MSIZE		PSIZE		MINC	PINC	CIRC	DIR	TEIE	HTIE	TCIE	EN
0x34	NDTR [3]														NDT
0x38	PAR [3]	PA													PA
0x3c	MAR [3]	MA													MA
0x44	CR [4]															MEM2MEM	PL		MSIZE		PSIZE		MINC	PINC	CIRC	DIR	TEIE	HTIE	TCIE	EN
0x48	NDTR [4]														NDT
0x4c	PAR [4]	PA													PA
0x50	MAR [4]	MA													MA
0x58	CR [5]															MEM2MEM	PL		MSIZE		PSIZE		MINC	PINC	CIRC	DIR	TEIE	HTIE	TCIE	EN
0x5c	NDTR [5]														NDT
0x60	PAR [5]	PA													PA
0x64	MAR [5]	MA													MA
0x6c	CR [6]															MEM2MEM	PL		MSIZE		PSIZE		MINC	PINC	CIRC	DIR	TEIE	HTIE	TCIE	EN
0x70	NDTR [6]														NDT
0x74	PAR [6]	PA													PA
0x78	MAR [6]	MA													MA
0x80	CR [7]															MEM2MEM	PL		MSIZE		PSIZE		MINC	PINC	CIRC	DIR	TEIE	HTIE	TCIE	EN
0x84	NDTR [7]														NDT
0x88	PAR [7]	PA													PA
0x8c	MAR [7]	MA													MA
0xa8	CSELR		C7S				C6S				C5S				C4S				C3S				C2S				C1S

Toggle registers

ISR

interrupt status register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-only

28/28 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
				TEIF[7] r	HTIF[7] r	TCIF[7] r	GIF[7] r	TEIF[6] r	HTIF[6] r	TCIF[6] r	GIF[6] r	TEIF[5] r	HTIF[5] r	TCIF[5] r	GIF[5] r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
TEIF[4] r	HTIF[4] r	TCIF[4] r	GIF[4] r	TEIF[3] r	HTIF[3] r	TCIF[3] r	GIF[3] r	TEIF[2] r	HTIF[2] r	TCIF[2] r	GIF[2] r	TEIF[1] r	HTIF[1] r	TCIF[1] r	GIF[1] r

Toggle fields

GIF[1]

Bit 0: Channel 1 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[1]

Bit 1: Channel 1 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[1]

Bit 2: Channel 1 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[1]

Bit 3: Channel 1 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[2]

Bit 4: Channel 2 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[2]

Bit 5: Channel 2 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[2]

Bit 6: Channel 2 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[2]

Bit 7: Channel 2 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[3]

Bit 8: Channel 3 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[3]

Bit 9: Channel 3 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[3]

Bit 10: Channel 3 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[3]

Bit 11: Channel 3 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[4]

Bit 12: Channel 4 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[4]

Bit 13: Channel 4 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[4]

Bit 14: Channel 4 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[4]

Bit 15: Channel 4 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[5]

Bit 16: Channel 5 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[5]

Bit 17: Channel 5 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[5]

Bit 18: Channel 5 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[5]

Bit 19: Channel 5 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[6]

Bit 20: Channel 6 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[6]

Bit 21: Channel 6 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[6]

Bit 22: Channel 6 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[6]

Bit 23: Channel 6 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[7]

Bit 24: Channel 7 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[7]

Bit 25: Channel 7 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[7]

Bit 26: Channel 7 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[7]

Bit 27: Channel 7 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

IFCR

interrupt flag clear register

Offset: 0x4, size: 32, reset: 0x00000000, access: write-only

28/28 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
				CTEIF[7] w	CHTIF[7] w	CTCIF[7] w	CGIF[7] w	CTEIF[6] w	CHTIF[6] w	CTCIF[6] w	CGIF[6] w	CTEIF[5] w	CHTIF[5] w	CTCIF[5] w	CGIF[5] w
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CTEIF[4] w	CHTIF[4] w	CTCIF[4] w	CGIF[4] w	CTEIF[3] w	CHTIF[3] w	CTCIF[3] w	CGIF[3] w	CTEIF[2] w	CHTIF[2] w	CTCIF[2] w	CGIF[2] w	CTEIF[1] w	CHTIF[1] w	CTCIF[1] w	CGIF[1] w

Toggle fields

CGIF[1]

Bit 0: Channel 1 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[1]

Bit 1: Channel 1 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[1]

Bit 2: Channel 1 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[1]

Bit 3: Channel 1 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[2]

Bit 4: Channel 2 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[2]

Bit 5: Channel 2 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[2]

Bit 6: Channel 2 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[2]

Bit 7: Channel 2 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[3]

Bit 8: Channel 3 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[3]

Bit 9: Channel 3 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[3]

Bit 10: Channel 3 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[3]

Bit 11: Channel 3 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[4]

Bit 12: Channel 4 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[4]

Bit 13: Channel 4 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[4]

Bit 14: Channel 4 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[4]

Bit 15: Channel 4 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[5]

Bit 16: Channel 5 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[5]

Bit 17: Channel 5 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[5]

Bit 18: Channel 5 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[5]

Bit 19: Channel 5 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[6]

Bit 20: Channel 6 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[6]

Bit 21: Channel 6 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[6]

Bit 22: Channel 6 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[6]

Bit 23: Channel 6 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[7]

Bit 24: Channel 7 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[7]

Bit 25: Channel 7 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[7]

Bit 26: Channel 7 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[7]

Bit 27: Channel 7 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CR [1]

channel x configuration register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	MEM2MEM rw	PL rw		MSIZE rw		PSIZE rw		MINC rw	PINC rw	CIRC rw	DIR rw	TEIE rw	HTIE rw	TCIE rw	EN rw

Toggle fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [1]

channel x number of data register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
NDT rw

Toggle fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [1]

channel x peripheral address register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PA rw

Toggle fields

PA

Bits 0-31: Peripheral address.

MAR [1]

channel x memory address register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MA rw

Toggle fields

MA

Bits 0-31: Memory address.

CR [2]

channel x configuration register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	MEM2MEM rw	PL rw		MSIZE rw		PSIZE rw		MINC rw	PINC rw	CIRC rw	DIR rw	TEIE rw	HTIE rw	TCIE rw	EN rw

Toggle fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [2]

channel x number of data register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
NDT rw

Toggle fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [2]

channel x peripheral address register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PA rw

Toggle fields

PA

Bits 0-31: Peripheral address.

MAR [2]

channel x memory address register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MA rw

Toggle fields

MA

Bits 0-31: Memory address.

CR [3]

channel x configuration register

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	MEM2MEM rw	PL rw		MSIZE rw		PSIZE rw		MINC rw	PINC rw	CIRC rw	DIR rw	TEIE rw	HTIE rw	TCIE rw	EN rw

Toggle fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [3]

channel x number of data register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
NDT rw

Toggle fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [3]

channel x peripheral address register

Offset: 0x38, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PA rw

Toggle fields

PA

Bits 0-31: Peripheral address.

MAR [3]

channel x memory address register

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MA rw

Toggle fields

MA

Bits 0-31: Memory address.

CR [4]

channel x configuration register

Offset: 0x44, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	MEM2MEM rw	PL rw		MSIZE rw		PSIZE rw		MINC rw	PINC rw	CIRC rw	DIR rw	TEIE rw	HTIE rw	TCIE rw	EN rw

Toggle fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [4]

channel x number of data register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
NDT rw

Toggle fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [4]

channel x peripheral address register

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PA rw

Toggle fields

PA

Bits 0-31: Peripheral address.

MAR [4]

channel x memory address register

Offset: 0x50, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MA rw

Toggle fields

MA

Bits 0-31: Memory address.

CR [5]

channel x configuration register

Offset: 0x58, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	MEM2MEM rw	PL rw		MSIZE rw		PSIZE rw		MINC rw	PINC rw	CIRC rw	DIR rw	TEIE rw	HTIE rw	TCIE rw	EN rw

Toggle fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [5]

channel x number of data register

Offset: 0x5c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
NDT rw

Toggle fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [5]

channel x peripheral address register

Offset: 0x60, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PA rw

Toggle fields

PA

Bits 0-31: Peripheral address.

MAR [5]

channel x memory address register

Offset: 0x64, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MA rw

Toggle fields

MA

Bits 0-31: Memory address.

CR [6]

channel x configuration register

Offset: 0x6c, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	MEM2MEM rw	PL rw		MSIZE rw		PSIZE rw		MINC rw	PINC rw	CIRC rw	DIR rw	TEIE rw	HTIE rw	TCIE rw	EN rw

Toggle fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [6]

channel x number of data register

Offset: 0x70, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
NDT rw

Toggle fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [6]

channel x peripheral address register

Offset: 0x74, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PA rw

Toggle fields

PA

Bits 0-31: Peripheral address.

MAR [6]

channel x memory address register

Offset: 0x78, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MA rw

Toggle fields

MA

Bits 0-31: Memory address.

CR [7]

channel x configuration register

Offset: 0x80, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	MEM2MEM rw	PL rw		MSIZE rw		PSIZE rw		MINC rw	PINC rw	CIRC rw	DIR rw	TEIE rw	HTIE rw	TCIE rw	EN rw

Toggle fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [7]

channel x number of data register

Offset: 0x84, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
NDT rw

Toggle fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [7]

channel x peripheral address register

Offset: 0x88, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PA rw

Toggle fields

PA

Bits 0-31: Peripheral address.

MAR [7]

channel x memory address register

Offset: 0x8c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MA rw

Toggle fields

MA

Bits 0-31: Memory address.

CSELR

channel selection register

Offset: 0xa8, size: 32, reset: 0x00000000, access: read-write

7/7 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
				C7S rw				C6S rw				C5S rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
C4S rw				C3S rw				C2S rw				C1S rw

Toggle fields

C1S

Bits 0-3: DMA channel 1 selection.

Allowed values:
0: NoMapping: Default mapping
1: Map1: Mapping 1
2: Map2: Mapping 2
3: Map3: Mapping 3
4: Map4: Mapping 4
5: Map5: Mapping 5
6: Map6: Mapping 6
7: Map7: Mapping 7
8: Map8: Mapping 8
9: Map9: Mapping 9
10: Map10: Mapping 10
11: Map11: Mapping 11
12: Map12: Mapping 12
13: Map13: Mapping 13
14: Map14: Mapping 14
15: Map15: Mapping 15

C2S

Bits 4-7: DMA channel 2 selection.

Allowed values:
0: NoMapping: Default mapping
1: Map1: Mapping 1
2: Map2: Mapping 2
3: Map3: Mapping 3
4: Map4: Mapping 4
5: Map5: Mapping 5
6: Map6: Mapping 6
7: Map7: Mapping 7
8: Map8: Mapping 8
9: Map9: Mapping 9
10: Map10: Mapping 10
11: Map11: Mapping 11
12: Map12: Mapping 12
13: Map13: Mapping 13
14: Map14: Mapping 14
15: Map15: Mapping 15

C3S

Bits 8-11: DMA channel 3 selection.

Allowed values:
0: NoMapping: Default mapping
1: Map1: Mapping 1
2: Map2: Mapping 2
3: Map3: Mapping 3
4: Map4: Mapping 4
5: Map5: Mapping 5
6: Map6: Mapping 6
7: Map7: Mapping 7
8: Map8: Mapping 8
9: Map9: Mapping 9
10: Map10: Mapping 10
11: Map11: Mapping 11
12: Map12: Mapping 12
13: Map13: Mapping 13
14: Map14: Mapping 14
15: Map15: Mapping 15

C4S

Bits 12-15: DMA channel 4 selection.

Allowed values:
0: NoMapping: Default mapping
1: Map1: Mapping 1
2: Map2: Mapping 2
3: Map3: Mapping 3
4: Map4: Mapping 4
5: Map5: Mapping 5
6: Map6: Mapping 6
7: Map7: Mapping 7
8: Map8: Mapping 8
9: Map9: Mapping 9
10: Map10: Mapping 10
11: Map11: Mapping 11
12: Map12: Mapping 12
13: Map13: Mapping 13
14: Map14: Mapping 14
15: Map15: Mapping 15

C5S

Bits 16-19: DMA channel 5 selection.

Allowed values:
0: NoMapping: Default mapping
1: Map1: Mapping 1
2: Map2: Mapping 2
3: Map3: Mapping 3
4: Map4: Mapping 4
5: Map5: Mapping 5
6: Map6: Mapping 6
7: Map7: Mapping 7
8: Map8: Mapping 8
9: Map9: Mapping 9
10: Map10: Mapping 10
11: Map11: Mapping 11
12: Map12: Mapping 12
13: Map13: Mapping 13
14: Map14: Mapping 14
15: Map15: Mapping 15

C6S

Bits 20-23: DMA channel 6 selection.

Allowed values:
0: NoMapping: Default mapping
1: Map1: Mapping 1
2: Map2: Mapping 2
3: Map3: Mapping 3
4: Map4: Mapping 4
5: Map5: Mapping 5
6: Map6: Mapping 6
7: Map7: Mapping 7
8: Map8: Mapping 8
9: Map9: Mapping 9
10: Map10: Mapping 10
11: Map11: Mapping 11
12: Map12: Mapping 12
13: Map13: Mapping 13
14: Map14: Mapping 14
15: Map15: Mapping 15

C7S

Bits 24-27: DMA channel 7 selection.

Allowed values:
0: NoMapping: Default mapping
1: Map1: Mapping 1
2: Map2: Mapping 2
3: Map3: Mapping 3
4: Map4: Mapping 4
5: Map5: Mapping 5
6: Map6: Mapping 6
7: Map7: Mapping 7
8: Map8: Mapping 8
9: Map9: Mapping 9
10: Map10: Mapping 10
11: Map11: Mapping 11
12: Map12: Mapping 12
13: Map13: Mapping 13
14: Map14: Mapping 14
15: Map15: Mapping 15

DMA2

0x40020400: Direct memory access controller

154/168 fields covered.

Toggle register map

Offset	Name	31	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	ISR		TEIF[7]	HTIF[7]	TCIF[7]	GIF[7]	TEIF[6]	HTIF[6]	TCIF[6]	GIF[6]	TEIF[5]	HTIF[5]	TCIF[5]	GIF[5]	TEIF[4]	HTIF[4]	TCIF[4]	GIF[4]	TEIF[3]	HTIF[3]	TCIF[3]	GIF[3]	TEIF[2]	HTIF[2]	TCIF[2]	GIF[2]	TEIF[1]	HTIF[1]	TCIF[1]	GIF[1]
0x4	IFCR		CTEIF[7]	CHTIF[7]	CTCIF[7]	CGIF[7]	CTEIF[6]	CHTIF[6]	CTCIF[6]	CGIF[6]	CTEIF[5]	CHTIF[5]	CTCIF[5]	CGIF[5]	CTEIF[4]	CHTIF[4]	CTCIF[4]	CGIF[4]	CTEIF[3]	CHTIF[3]	CTCIF[3]	CGIF[3]	CTEIF[2]	CHTIF[2]	CTCIF[2]	CGIF[2]	CTEIF[1]	CHTIF[1]	CTCIF[1]	CGIF[1]
0x8	CR [1]															MEM2MEM	PL		MSIZE		PSIZE		MINC	PINC	CIRC	DIR	TEIE	HTIE	TCIE	EN
0xc	NDTR [1]														NDT
0x10	PAR [1]	PA													PA
0x14	MAR [1]	MA													MA
0x1c	CR [2]															MEM2MEM	PL		MSIZE		PSIZE		MINC	PINC	CIRC	DIR	TEIE	HTIE	TCIE	EN
0x20	NDTR [2]														NDT
0x24	PAR [2]	PA													PA
0x28	MAR [2]	MA													MA
0x30	CR [3]															MEM2MEM	PL		MSIZE		PSIZE		MINC	PINC	CIRC	DIR	TEIE	HTIE	TCIE	EN
0x34	NDTR [3]														NDT
0x38	PAR [3]	PA													PA
0x3c	MAR [3]	MA													MA
0x44	CR [4]															MEM2MEM	PL		MSIZE		PSIZE		MINC	PINC	CIRC	DIR	TEIE	HTIE	TCIE	EN
0x48	NDTR [4]														NDT
0x4c	PAR [4]	PA													PA
0x50	MAR [4]	MA													MA
0x58	CR [5]															MEM2MEM	PL		MSIZE		PSIZE		MINC	PINC	CIRC	DIR	TEIE	HTIE	TCIE	EN
0x5c	NDTR [5]														NDT
0x60	PAR [5]	PA													PA
0x64	MAR [5]	MA													MA
0x6c	CR [6]															MEM2MEM	PL		MSIZE		PSIZE		MINC	PINC	CIRC	DIR	TEIE	HTIE	TCIE	EN
0x70	NDTR [6]														NDT
0x74	PAR [6]	PA													PA
0x78	MAR [6]	MA													MA
0x80	CR [7]															MEM2MEM	PL		MSIZE		PSIZE		MINC	PINC	CIRC	DIR	TEIE	HTIE	TCIE	EN
0x84	NDTR [7]														NDT
0x88	PAR [7]	PA													PA
0x8c	MAR [7]	MA													MA
0xa8	CSELR		C7S				C6S				C5S				C4S				C3S				C2S				C1S

Toggle registers

ISR

interrupt status register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-only

28/28 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
				TEIF[7] r	HTIF[7] r	TCIF[7] r	GIF[7] r	TEIF[6] r	HTIF[6] r	TCIF[6] r	GIF[6] r	TEIF[5] r	HTIF[5] r	TCIF[5] r	GIF[5] r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
TEIF[4] r	HTIF[4] r	TCIF[4] r	GIF[4] r	TEIF[3] r	HTIF[3] r	TCIF[3] r	GIF[3] r	TEIF[2] r	HTIF[2] r	TCIF[2] r	GIF[2] r	TEIF[1] r	HTIF[1] r	TCIF[1] r	GIF[1] r

Toggle fields

GIF[1]

Bit 0: Channel 1 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[1]

Bit 1: Channel 1 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[1]

Bit 2: Channel 1 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[1]

Bit 3: Channel 1 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[2]

Bit 4: Channel 2 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[2]

Bit 5: Channel 2 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[2]

Bit 6: Channel 2 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[2]

Bit 7: Channel 2 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[3]

Bit 8: Channel 3 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[3]

Bit 9: Channel 3 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[3]

Bit 10: Channel 3 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[3]

Bit 11: Channel 3 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[4]

Bit 12: Channel 4 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[4]

Bit 13: Channel 4 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[4]

Bit 14: Channel 4 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[4]

Bit 15: Channel 4 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[5]

Bit 16: Channel 5 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[5]

Bit 17: Channel 5 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[5]

Bit 18: Channel 5 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[5]

Bit 19: Channel 5 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[6]

Bit 20: Channel 6 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[6]

Bit 21: Channel 6 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[6]

Bit 22: Channel 6 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[6]

Bit 23: Channel 6 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF[7]

Bit 24: Channel 7 Global interrupt flag.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

TCIF[7]

Bit 25: Channel 7 Transfer Complete flag.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTIF[7]

Bit 26: Channel 7 Half Transfer Complete flag.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

TEIF[7]

Bit 27: Channel 7 Transfer Error flag.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

IFCR

interrupt flag clear register

Offset: 0x4, size: 32, reset: 0x00000000, access: write-only

28/28 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
				CTEIF[7] w	CHTIF[7] w	CTCIF[7] w	CGIF[7] w	CTEIF[6] w	CHTIF[6] w	CTCIF[6] w	CGIF[6] w	CTEIF[5] w	CHTIF[5] w	CTCIF[5] w	CGIF[5] w
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CTEIF[4] w	CHTIF[4] w	CTCIF[4] w	CGIF[4] w	CTEIF[3] w	CHTIF[3] w	CTCIF[3] w	CGIF[3] w	CTEIF[2] w	CHTIF[2] w	CTCIF[2] w	CGIF[2] w	CTEIF[1] w	CHTIF[1] w	CTCIF[1] w	CGIF[1] w

Toggle fields

CGIF[1]

Bit 0: Channel 1 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[1]

Bit 1: Channel 1 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[1]

Bit 2: Channel 1 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[1]

Bit 3: Channel 1 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[2]

Bit 4: Channel 2 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[2]

Bit 5: Channel 2 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[2]

Bit 6: Channel 2 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[2]

Bit 7: Channel 2 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[3]

Bit 8: Channel 3 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[3]

Bit 9: Channel 3 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[3]

Bit 10: Channel 3 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[3]

Bit 11: Channel 3 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[4]

Bit 12: Channel 4 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[4]

Bit 13: Channel 4 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[4]

Bit 14: Channel 4 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[4]

Bit 15: Channel 4 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[5]

Bit 16: Channel 5 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[5]

Bit 17: Channel 5 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[5]

Bit 18: Channel 5 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[5]

Bit 19: Channel 5 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[6]

Bit 20: Channel 6 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[6]

Bit 21: Channel 6 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[6]

Bit 22: Channel 6 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[6]

Bit 23: Channel 6 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CGIF[7]

Bit 24: Channel 7 Global interrupt clear.

Allowed values:
1: Clear: Clears the GIF, TEIF, HTIF, TCIF flags in the ISR register

CTCIF[7]

Bit 25: Channel 7 Transfer Complete clear.

Allowed values:
1: Clear: Clears the TCIF flag in the ISR register

CHTIF[7]

Bit 26: Channel 7 Half Transfer clear.

Allowed values:
1: Clear: Clears the HTIF flag in the ISR register

CTEIF[7]

Bit 27: Channel 7 Transfer Error clear.

Allowed values:
1: Clear: Clears the TEIF flag in the ISR register

CR [1]

channel x configuration register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	MEM2MEM rw	PL rw		MSIZE rw		PSIZE rw		MINC rw	PINC rw	CIRC rw	DIR rw	TEIE rw	HTIE rw	TCIE rw	EN rw

Toggle fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [1]

channel x number of data register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
NDT rw

Toggle fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [1]

channel x peripheral address register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PA rw

Toggle fields

PA

Bits 0-31: Peripheral address.

MAR [1]

channel x memory address register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MA rw

Toggle fields

MA

Bits 0-31: Memory address.

CR [2]

channel x configuration register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	MEM2MEM rw	PL rw		MSIZE rw		PSIZE rw		MINC rw	PINC rw	CIRC rw	DIR rw	TEIE rw	HTIE rw	TCIE rw	EN rw

Toggle fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [2]

channel x number of data register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
NDT rw

Toggle fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [2]

channel x peripheral address register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PA rw

Toggle fields

PA

Bits 0-31: Peripheral address.

MAR [2]

channel x memory address register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MA rw

Toggle fields

MA

Bits 0-31: Memory address.

CR [3]

channel x configuration register

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	MEM2MEM rw	PL rw		MSIZE rw		PSIZE rw		MINC rw	PINC rw	CIRC rw	DIR rw	TEIE rw	HTIE rw	TCIE rw	EN rw

Toggle fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [3]

channel x number of data register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
NDT rw

Toggle fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [3]

channel x peripheral address register

Offset: 0x38, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PA rw

Toggle fields

PA

Bits 0-31: Peripheral address.

MAR [3]

channel x memory address register

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MA rw

Toggle fields

MA

Bits 0-31: Memory address.

CR [4]

channel x configuration register

Offset: 0x44, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	MEM2MEM rw	PL rw		MSIZE rw		PSIZE rw		MINC rw	PINC rw	CIRC rw	DIR rw	TEIE rw	HTIE rw	TCIE rw	EN rw

Toggle fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [4]

channel x number of data register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
NDT rw

Toggle fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [4]

channel x peripheral address register

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PA rw

Toggle fields

PA

Bits 0-31: Peripheral address.

MAR [4]

channel x memory address register

Offset: 0x50, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MA rw

Toggle fields

MA

Bits 0-31: Memory address.

CR [5]

channel x configuration register

Offset: 0x58, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	MEM2MEM rw	PL rw		MSIZE rw		PSIZE rw		MINC rw	PINC rw	CIRC rw	DIR rw	TEIE rw	HTIE rw	TCIE rw	EN rw

Toggle fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [5]

channel x number of data register

Offset: 0x5c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
NDT rw

Toggle fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [5]

channel x peripheral address register

Offset: 0x60, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PA rw

Toggle fields

PA

Bits 0-31: Peripheral address.

MAR [5]

channel x memory address register

Offset: 0x64, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MA rw

Toggle fields

MA

Bits 0-31: Memory address.

CR [6]

channel x configuration register

Offset: 0x6c, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	MEM2MEM rw	PL rw		MSIZE rw		PSIZE rw		MINC rw	PINC rw	CIRC rw	DIR rw	TEIE rw	HTIE rw	TCIE rw	EN rw

Toggle fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [6]

channel x number of data register

Offset: 0x70, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
NDT rw

Toggle fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [6]

channel x peripheral address register

Offset: 0x74, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PA rw

Toggle fields

PA

Bits 0-31: Peripheral address.

MAR [6]

channel x memory address register

Offset: 0x78, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MA rw

Toggle fields

MA

Bits 0-31: Memory address.

CR [7]

channel x configuration register

Offset: 0x80, size: 32, reset: 0x00000000, access: read-write

12/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	MEM2MEM rw	PL rw		MSIZE rw		PSIZE rw		MINC rw	PINC rw	CIRC rw	DIR rw	TEIE rw	HTIE rw	TCIE rw	EN rw

Toggle fields

EN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

TCIE

Bit 1: Transfer complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

HTIE

Bit 2: Half transfer interrupt enable.

Allowed values:
0: Disabled: Half Transfer interrupt disabled
1: Enabled: Half Transfer interrupt enabled

TEIE

Bit 3: Transfer error interrupt enable.

Allowed values:
0: Disabled: Transfer Error interrupt disabled
1: Enabled: Transfer Error interrupt enabled

DIR

Bit 4: Data transfer direction.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CIRC

Bit 5: Circular mode.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PINC

Bit 6: Peripheral increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

MINC

Bit 7: Memory increment mode.

Allowed values:
0: Disabled: Increment mode disabled
1: Enabled: Increment mode enabled

PSIZE

Bits 8-9: Peripheral size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MSIZE

Bits 10-11: Memory size.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PL

Bits 12-13: Channel priority level.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

MEM2MEM

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

NDTR [7]

channel x number of data register

Offset: 0x84, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
NDT rw

Toggle fields

NDT

Bits 0-15: Number of data to transfer.

Allowed values: 0x0-0xffff

PAR [7]

channel x peripheral address register

Offset: 0x88, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PA rw

Toggle fields

PA

Bits 0-31: Peripheral address.

MAR [7]

channel x memory address register

Offset: 0x8c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MA rw

Toggle fields

MA

Bits 0-31: Memory address.

CSELR

channel selection register

Offset: 0xa8, size: 32, reset: 0x00000000, access: read-write

7/7 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
				C7S rw				C6S rw				C5S rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
C4S rw				C3S rw				C2S rw				C1S rw

Toggle fields

C1S

Bits 0-3: DMA channel 1 selection.

Allowed values:
0: NoMapping: Default mapping
1: Map1: Mapping 1
2: Map2: Mapping 2
3: Map3: Mapping 3
4: Map4: Mapping 4
5: Map5: Mapping 5
6: Map6: Mapping 6
7: Map7: Mapping 7
8: Map8: Mapping 8
9: Map9: Mapping 9
10: Map10: Mapping 10
11: Map11: Mapping 11
12: Map12: Mapping 12
13: Map13: Mapping 13
14: Map14: Mapping 14
15: Map15: Mapping 15

C2S

Bits 4-7: DMA channel 2 selection.

Allowed values:
0: NoMapping: Default mapping
1: Map1: Mapping 1
2: Map2: Mapping 2
3: Map3: Mapping 3
4: Map4: Mapping 4
5: Map5: Mapping 5
6: Map6: Mapping 6
7: Map7: Mapping 7
8: Map8: Mapping 8
9: Map9: Mapping 9
10: Map10: Mapping 10
11: Map11: Mapping 11
12: Map12: Mapping 12
13: Map13: Mapping 13
14: Map14: Mapping 14
15: Map15: Mapping 15

C3S

Bits 8-11: DMA channel 3 selection.

Allowed values:
0: NoMapping: Default mapping
1: Map1: Mapping 1
2: Map2: Mapping 2
3: Map3: Mapping 3
4: Map4: Mapping 4
5: Map5: Mapping 5
6: Map6: Mapping 6
7: Map7: Mapping 7
8: Map8: Mapping 8
9: Map9: Mapping 9
10: Map10: Mapping 10
11: Map11: Mapping 11
12: Map12: Mapping 12
13: Map13: Mapping 13
14: Map14: Mapping 14
15: Map15: Mapping 15

C4S

Bits 12-15: DMA channel 4 selection.

Allowed values:
0: NoMapping: Default mapping
1: Map1: Mapping 1
2: Map2: Mapping 2
3: Map3: Mapping 3
4: Map4: Mapping 4
5: Map5: Mapping 5
6: Map6: Mapping 6
7: Map7: Mapping 7
8: Map8: Mapping 8
9: Map9: Mapping 9
10: Map10: Mapping 10
11: Map11: Mapping 11
12: Map12: Mapping 12
13: Map13: Mapping 13
14: Map14: Mapping 14
15: Map15: Mapping 15

C5S

Bits 16-19: DMA channel 5 selection.

Allowed values:
0: NoMapping: Default mapping
1: Map1: Mapping 1
2: Map2: Mapping 2
3: Map3: Mapping 3
4: Map4: Mapping 4
5: Map5: Mapping 5
6: Map6: Mapping 6
7: Map7: Mapping 7
8: Map8: Mapping 8
9: Map9: Mapping 9
10: Map10: Mapping 10
11: Map11: Mapping 11
12: Map12: Mapping 12
13: Map13: Mapping 13
14: Map14: Mapping 14
15: Map15: Mapping 15

C6S

Bits 20-23: DMA channel 6 selection.

Allowed values:
0: NoMapping: Default mapping
1: Map1: Mapping 1
2: Map2: Mapping 2
3: Map3: Mapping 3
4: Map4: Mapping 4
5: Map5: Mapping 5
6: Map6: Mapping 6
7: Map7: Mapping 7
8: Map8: Mapping 8
9: Map9: Mapping 9
10: Map10: Mapping 10
11: Map11: Mapping 11
12: Map12: Mapping 12
13: Map13: Mapping 13
14: Map14: Mapping 14
15: Map15: Mapping 15

C7S

Bits 24-27: DMA channel 7 selection.

Allowed values:
0: NoMapping: Default mapping
1: Map1: Mapping 1
2: Map2: Mapping 2
3: Map3: Mapping 3
4: Map4: Mapping 4
5: Map5: Mapping 5
6: Map6: Mapping 6
7: Map7: Mapping 7
8: Map8: Mapping 8
9: Map9: Mapping 9
10: Map10: Mapping 10
11: Map11: Mapping 11
12: Map12: Mapping 12
13: Map13: Mapping 13
14: Map14: Mapping 14
15: Map15: Mapping 15

EXTI

0x40010400: External interrupt/event controller

184/184 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	IMR1	MR31	MR30	MR29	MR28	MR27	MR26	MR25	MR24	MR23	MR22	MR21	MR20	MR19	MR18	MR17	MR16	MR15	MR14	MR13	MR12	MR11	MR10	MR9	MR8	MR7	MR6	MR5	MR4	MR3	MR2	MR1	MR0
0x4	EMR1	MR31	MR30	MR29	MR28	MR27	MR26	MR25	MR24	MR23	MR22	MR21	MR20	MR19	MR18	MR17	MR16	MR15	MR14	MR13	MR12	MR11	MR10	MR9	MR8	MR7	MR6	MR5	MR4	MR3	MR2	MR1	MR0
0x8	RTSR1										TR22	TR21	TR20	TR19	TR18		TR16	TR15	TR14	TR13	TR12	TR11	TR10	TR9	TR8	TR7	TR6	TR5	TR4	TR3	TR2	TR1	TR0
0xc	FTSR1										TR22	TR21	TR20	TR19	TR18		TR16	TR15	TR14	TR13	TR12	TR11	TR10	TR9	TR8	TR7	TR6	TR5	TR4	TR3	TR2	TR1	TR0
0x10	SWIER1										SWIER22	SWIER21	SWIER20	SWIER19	SWIER18		SWIER16	SWIER15	SWIER14	SWIER13	SWIER12	SWIER11	SWIER10	SWIER9	SWIER8	SWIER7	SWIER6	SWIER5	SWIER4	SWIER3	SWIER2	SWIER1	SWIER0
0x14	PR1										PR22	PR21	PR20	PR19	PR18		PR16	PR15	PR14	PR13	PR12	PR11	PR10	PR9	PR8	PR7	PR6	PR5	PR4	PR3	PR2	PR1	PR0
0x20	IMR2																									MR39	MR38	MR37	MR36	MR35	MR34	MR33	MR32
0x24	EMR2																									MR39	MR38	MR37	MR36	MR35	MR34	MR33	MR32
0x28	RTSR2																										RT38	RT37	RT36	RT35
0x2c	FTSR2																										FT38	FT37	FT36	FT35
0x30	SWIER2																										SWI38	SWI37	SWI36	SWI35
0x34	PR2																										PIF38	PIF37	PIF36	PIF35

Toggle registers

IMR1

Interrupt mask register

Offset: 0x0, size: 32, reset: 0xFF820000, access: read-write

32/32 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MR31 rw	MR30 rw	MR29 rw	MR28 rw	MR27 rw	MR26 rw	MR25 rw	MR24 rw	MR23 rw	MR22 rw	MR21 rw	MR20 rw	MR19 rw	MR18 rw	MR17 rw	MR16 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MR15 rw	MR14 rw	MR13 rw	MR12 rw	MR11 rw	MR10 rw	MR9 rw	MR8 rw	MR7 rw	MR6 rw	MR5 rw	MR4 rw	MR3 rw	MR2 rw	MR1 rw	MR0 rw

Toggle fields

MR0

Bit 0: Interrupt Mask on line 0.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR1

Bit 1: Interrupt Mask on line 1.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR2

Bit 2: Interrupt Mask on line 2.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR3

Bit 3: Interrupt Mask on line 3.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR4

Bit 4: Interrupt Mask on line 4.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR5

Bit 5: Interrupt Mask on line 5.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR6

Bit 6: Interrupt Mask on line 6.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR7

Bit 7: Interrupt Mask on line 7.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR8

Bit 8: Interrupt Mask on line 8.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR9

Bit 9: Interrupt Mask on line 9.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR10

Bit 10: Interrupt Mask on line 10.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR11

Bit 11: Interrupt Mask on line 11.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR12

Bit 12: Interrupt Mask on line 12.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR13

Bit 13: Interrupt Mask on line 13.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR14

Bit 14: Interrupt Mask on line 14.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR15

Bit 15: Interrupt Mask on line 15.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR16

Bit 16: Interrupt Mask on line 16.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR17

Bit 17: Interrupt Mask on line 17.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR18

Bit 18: Interrupt Mask on line 18.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR19

Bit 19: Interrupt Mask on line 19.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR20

Bit 20: Interrupt Mask on line 20.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR21

Bit 21: Interrupt Mask on line 21.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR22

Bit 22: Interrupt Mask on line 22.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR23

Bit 23: Interrupt Mask on line 23.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR24

Bit 24: Interrupt Mask on line 24.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR25

Bit 25: Interrupt Mask on line 25.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR26

Bit 26: Interrupt Mask on line 26.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR27

Bit 27: Interrupt Mask on line 27.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR28

Bit 28: Interrupt Mask on line 28.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR29

Bit 29: Interrupt Mask on line 29.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR30

Bit 30: Interrupt Mask on line 30.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR31

Bit 31: Interrupt Mask on line 31.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EMR1

Event mask register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

32/32 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MR31 rw	MR30 rw	MR29 rw	MR28 rw	MR27 rw	MR26 rw	MR25 rw	MR24 rw	MR23 rw	MR22 rw	MR21 rw	MR20 rw	MR19 rw	MR18 rw	MR17 rw	MR16 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MR15 rw	MR14 rw	MR13 rw	MR12 rw	MR11 rw	MR10 rw	MR9 rw	MR8 rw	MR7 rw	MR6 rw	MR5 rw	MR4 rw	MR3 rw	MR2 rw	MR1 rw	MR0 rw

Toggle fields

MR0

Bit 0: Event Mask on line 0.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR1

Bit 1: Event Mask on line 1.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR2

Bit 2: Event Mask on line 2.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR3

Bit 3: Event Mask on line 3.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR4

Bit 4: Event Mask on line 4.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR5

Bit 5: Event Mask on line 5.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR6

Bit 6: Event Mask on line 6.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR7

Bit 7: Event Mask on line 7.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR8

Bit 8: Event Mask on line 8.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR9

Bit 9: Event Mask on line 9.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR10

Bit 10: Event Mask on line 10.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR11

Bit 11: Event Mask on line 11.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR12

Bit 12: Event Mask on line 12.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR13

Bit 13: Event Mask on line 13.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR14

Bit 14: Event Mask on line 14.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR15

Bit 15: Event Mask on line 15.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR16

Bit 16: Event Mask on line 16.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR17

Bit 17: Event Mask on line 17.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR18

Bit 18: Event Mask on line 18.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR19

Bit 19: Event Mask on line 19.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR20

Bit 20: Event Mask on line 20.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR21

Bit 21: Event Mask on line 21.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR22

Bit 22: Event Mask on line 22.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR23

Bit 23: Event Mask on line 23.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR24

Bit 24: Event Mask on line 24.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR25

Bit 25: Event Mask on line 25.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR26

Bit 26: Event Mask on line 26.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR27

Bit 27: Event Mask on line 27.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR28

Bit 28: Event Mask on line 28.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR29

Bit 29: Event Mask on line 29.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR30

Bit 30: Event Mask on line 30.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR31

Bit 31: Event Mask on line 31.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

RTSR1

Rising Trigger selection register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

22/22 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
									TR22 rw	TR21 rw	TR20 rw	TR19 rw	TR18 rw		TR16 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
TR15 rw	TR14 rw	TR13 rw	TR12 rw	TR11 rw	TR10 rw	TR9 rw	TR8 rw	TR7 rw	TR6 rw	TR5 rw	TR4 rw	TR3 rw	TR2 rw	TR1 rw	TR0 rw

Toggle fields

TR0

Bit 0: Rising trigger event configuration of line 0.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR1

Bit 1: Rising trigger event configuration of line 1.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR2

Bit 2: Rising trigger event configuration of line 2.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR3

Bit 3: Rising trigger event configuration of line 3.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR4

Bit 4: Rising trigger event configuration of line 4.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR5

Bit 5: Rising trigger event configuration of line 5.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR6

Bit 6: Rising trigger event configuration of line 6.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR7

Bit 7: Rising trigger event configuration of line 7.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR8

Bit 8: Rising trigger event configuration of line 8.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR9

Bit 9: Rising trigger event configuration of line 9.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR10

Bit 10: Rising trigger event configuration of line 10.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR11

Bit 11: Rising trigger event configuration of line 11.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR12

Bit 12: Rising trigger event configuration of line 12.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR13

Bit 13: Rising trigger event configuration of line 13.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR14

Bit 14: Rising trigger event configuration of line 14.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR15

Bit 15: Rising trigger event configuration of line 15.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR16

Bit 16: Rising trigger event configuration of line 16.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR18

Bit 18: Rising trigger event configuration of line 18.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR19

Bit 19: Rising trigger event configuration of line 19.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR20

Bit 20: Rising trigger event configuration of line 20.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR21

Bit 21: Rising trigger event configuration of line 21.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

TR22

Bit 22: Rising trigger event configuration of line 22.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

FTSR1

Falling Trigger selection register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

22/22 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
									TR22 rw	TR21 rw	TR20 rw	TR19 rw	TR18 rw		TR16 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
TR15 rw	TR14 rw	TR13 rw	TR12 rw	TR11 rw	TR10 rw	TR9 rw	TR8 rw	TR7 rw	TR6 rw	TR5 rw	TR4 rw	TR3 rw	TR2 rw	TR1 rw	TR0 rw

Toggle fields

TR0

Bit 0: Falling trigger event configuration of line 0.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR1

Bit 1: Falling trigger event configuration of line 1.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR2

Bit 2: Falling trigger event configuration of line 2.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR3

Bit 3: Falling trigger event configuration of line 3.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR4

Bit 4: Falling trigger event configuration of line 4.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR5

Bit 5: Falling trigger event configuration of line 5.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR6

Bit 6: Falling trigger event configuration of line 6.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR7

Bit 7: Falling trigger event configuration of line 7.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR8

Bit 8: Falling trigger event configuration of line 8.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR9

Bit 9: Falling trigger event configuration of line 9.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR10

Bit 10: Falling trigger event configuration of line 10.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR11

Bit 11: Falling trigger event configuration of line 11.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR12

Bit 12: Falling trigger event configuration of line 12.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR13

Bit 13: Falling trigger event configuration of line 13.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR14

Bit 14: Falling trigger event configuration of line 14.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR15

Bit 15: Falling trigger event configuration of line 15.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR16

Bit 16: Falling trigger event configuration of line 16.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR18

Bit 18: Falling trigger event configuration of line 18.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR19

Bit 19: Falling trigger event configuration of line 19.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR20

Bit 20: Falling trigger event configuration of line 20.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR21

Bit 21: Falling trigger event configuration of line 21.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

TR22

Bit 22: Falling trigger event configuration of line 22.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

SWIER1

Software interrupt event register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

22/22 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
									SWIER22 rw	SWIER21 rw	SWIER20 rw	SWIER19 rw	SWIER18 rw		SWIER16 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SWIER15 rw	SWIER14 rw	SWIER13 rw	SWIER12 rw	SWIER11 rw	SWIER10 rw	SWIER9 rw	SWIER8 rw	SWIER7 rw	SWIER6 rw	SWIER5 rw	SWIER4 rw	SWIER3 rw	SWIER2 rw	SWIER1 rw	SWIER0 rw

Toggle fields

SWIER0

Bit 0: Software Interrupt on line 0.

Allowed values:
1: Pend: Generates an interrupt request

SWIER1

Bit 1: Software Interrupt on line 1.

Allowed values:
1: Pend: Generates an interrupt request

SWIER2

Bit 2: Software Interrupt on line 2.

Allowed values:
1: Pend: Generates an interrupt request

SWIER3

Bit 3: Software Interrupt on line 3.

Allowed values:
1: Pend: Generates an interrupt request

SWIER4

Bit 4: Software Interrupt on line 4.

Allowed values:
1: Pend: Generates an interrupt request

SWIER5

Bit 5: Software Interrupt on line 5.

Allowed values:
1: Pend: Generates an interrupt request

SWIER6

Bit 6: Software Interrupt on line 6.

Allowed values:
1: Pend: Generates an interrupt request

SWIER7

Bit 7: Software Interrupt on line 7.

Allowed values:
1: Pend: Generates an interrupt request

SWIER8

Bit 8: Software Interrupt on line 8.

Allowed values:
1: Pend: Generates an interrupt request

SWIER9

Bit 9: Software Interrupt on line 9.

Allowed values:
1: Pend: Generates an interrupt request

SWIER10

Bit 10: Software Interrupt on line 10.

Allowed values:
1: Pend: Generates an interrupt request

SWIER11

Bit 11: Software Interrupt on line 11.

Allowed values:
1: Pend: Generates an interrupt request

SWIER12

Bit 12: Software Interrupt on line 12.

Allowed values:
1: Pend: Generates an interrupt request

SWIER13

Bit 13: Software Interrupt on line 13.

Allowed values:
1: Pend: Generates an interrupt request

SWIER14

Bit 14: Software Interrupt on line 14.

Allowed values:
1: Pend: Generates an interrupt request

SWIER15

Bit 15: Software Interrupt on line 15.

Allowed values:
1: Pend: Generates an interrupt request

SWIER16

Bit 16: Software Interrupt on line 16.

Allowed values:
1: Pend: Generates an interrupt request

SWIER18

Bit 18: Software Interrupt on line 18.

Allowed values:
1: Pend: Generates an interrupt request

SWIER19

Bit 19: Software Interrupt on line 19.

Allowed values:
1: Pend: Generates an interrupt request

SWIER20

Bit 20: Software Interrupt on line 20.

Allowed values:
1: Pend: Generates an interrupt request

SWIER21

Bit 21: Software Interrupt on line 21.

Allowed values:
1: Pend: Generates an interrupt request

SWIER22

Bit 22: Software Interrupt on line 22.

Allowed values:
1: Pend: Generates an interrupt request

PR1

Pending register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

22/22 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
									PR22 rw	PR21 rw	PR20 rw	PR19 rw	PR18 rw		PR16 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PR15 rw	PR14 rw	PR13 rw	PR12 rw	PR11 rw	PR10 rw	PR9 rw	PR8 rw	PR7 rw	PR6 rw	PR5 rw	PR4 rw	PR3 rw	PR2 rw	PR1 rw	PR0 rw

Toggle fields

PR0

Bit 0: Pending bit 0.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR1

Bit 1: Pending bit 1.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR2

Bit 2: Pending bit 2.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR3

Bit 3: Pending bit 3.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR4

Bit 4: Pending bit 4.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR5

Bit 5: Pending bit 5.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR6

Bit 6: Pending bit 6.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR7

Bit 7: Pending bit 7.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR8

Bit 8: Pending bit 8.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR9

Bit 9: Pending bit 9.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR10

Bit 10: Pending bit 10.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR11

Bit 11: Pending bit 11.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR12

Bit 12: Pending bit 12.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR13

Bit 13: Pending bit 13.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR14

Bit 14: Pending bit 14.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR15

Bit 15: Pending bit 15.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR16

Bit 16: Pending bit 16.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR18

Bit 18: Pending bit 18.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR19

Bit 19: Pending bit 19.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR20

Bit 20: Pending bit 20.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR21

Bit 21: Pending bit 21.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PR22

Bit 22: Pending bit 22.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

IMR2

Interrupt mask register

Offset: 0x20, size: 32, reset: 0xFFFFFF87, access: read-write

8/8 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								MR39 rw	MR38 rw	MR37 rw	MR36 rw	MR35 rw	MR34 rw	MR33 rw	MR32 rw

Toggle fields

MR32

Bit 0: Interrupt Mask on external/internal line 32.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR33

Bit 1: Interrupt Mask on external/internal line 33.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR34

Bit 2: Interrupt Mask on external/internal line 34.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR35

Bit 3: Interrupt Mask on external/internal line 35.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR36

Bit 4: Interrupt Mask on external/internal line 36.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR37

Bit 5: Interrupt Mask on external/internal line 37.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR38

Bit 6: Interrupt Mask on external/internal line 38.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR39

Bit 7: Interrupt Mask on external/internal line 39.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

EMR2

Event mask register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								MR39 rw	MR38 rw	MR37 rw	MR36 rw	MR35 rw	MR34 rw	MR33 rw	MR32 rw

Toggle fields

MR32

Bit 0: Event mask on external/internal line 32.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR33

Bit 1: Event mask on external/internal line 33.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR34

Bit 2: Event mask on external/internal line 34.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR35

Bit 3: Event mask on external/internal line 35.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR36

Bit 4: Event mask on external/internal line 36.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR37

Bit 5: Event mask on external/internal line 37.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR38

Bit 6: Event mask on external/internal line 38.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

MR39

Bit 7: Event mask on external/internal line 39.

Allowed values:
0: Masked: Interrupt request line is masked
1: Unmasked: Interrupt request line is unmasked

RTSR2

Rising Trigger selection register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

4/4 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									RT38 rw	RT37 rw	RT36 rw	RT35 rw

Toggle fields

RT35

Bit 3: Rising trigger event configuration bit of line 35.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RT36

Bit 4: Rising trigger event configuration bit of line 36.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RT37

Bit 5: Rising trigger event configuration bit of line 37.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RT38

Bit 6: Rising trigger event configuration bit of line 38.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

FTSR2

Falling Trigger selection register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

4/4 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									FT38 rw	FT37 rw	FT36 rw	FT35 rw

Toggle fields

FT35

Bit 3: Falling trigger event configuration bit of line 35.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FT36

Bit 4: Falling trigger event configuration bit of line 36.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FT37

Bit 5: Falling trigger event configuration bit of line 37.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FT38

Bit 6: Falling trigger event configuration bit of line 38.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

SWIER2

Software interrupt event register

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

4/4 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									SWI38 rw	SWI37 rw	SWI36 rw	SWI35 rw

Toggle fields

SWI35

Bit 3: Software interrupt on line 35.

Allowed values:
1: Pend: Generates an interrupt request

SWI36

Bit 4: Software interrupt on line 36.

Allowed values:
1: Pend: Generates an interrupt request

SWI37

Bit 5: Software interrupt on line 37.

Allowed values:
1: Pend: Generates an interrupt request

SWI38

Bit 6: Software interrupt on line 38.

Allowed values:
1: Pend: Generates an interrupt request

PR2

Pending register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

4/4 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									PIF38 rw	PIF37 rw	PIF36 rw	PIF35 rw

Toggle fields

PIF35

Bit 3: Pending interrupt flag on line 35.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PIF36

Bit 4: Pending interrupt flag on line 36.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PIF37

Bit 5: Pending interrupt flag on line 37.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PIF38

Bit 6: Pending interrupt flag on line 38.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FIREWALL

0x40011c00: Firewall

9/9 fields covered.

Toggle register map

Offset	Name	23	21	15	2	1	0
0x0	CSSA	ADD		ADD
0x4	CSL		LENG	LENG
0x8	NVDSSA	ADD		ADD
0xc	NVDSL		LENG	LENG
0x10	VDSSA			ADD
0x14	VDSL			LENG
0x20	CR				VDE	VDS	FPA

Toggle registers

CSSA

Code segment start address

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								ADD rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ADD rw

Toggle fields

ADD

Bits 8-23: code segment start address.

Allowed values: 0x0-0xffff

CSL

Code segment length

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
										LENG rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
LENG rw

Toggle fields

LENG

Bits 8-21: code segment length.

Allowed values: 0x0-0x3fff

NVDSSA

Non-volatile data segment start address

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								ADD rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ADD rw

Toggle fields

ADD

Bits 8-23: Non-volatile data segment start address.

Allowed values: 0x0-0xffff

NVDSL

Non-volatile data segment length

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
										LENG rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
LENG rw

Toggle fields

LENG

Bits 8-21: Non-volatile data segment length.

Allowed values: 0x0-0x3fff

VDSSA

Volatile data segment start address

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ADD rw

Toggle fields

ADD

Bits 6-15: Volatile data segment start address.

Allowed values: 0x0-0x3ff

VDSL

Volatile data segment length

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
LENG rw

Toggle fields

LENG

Bits 6-15: Non-volatile data segment length.

Allowed values: 0x0-0x3ff

CR

Configuration register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
													VDE rw	VDS rw	FPA rw

Toggle fields

FPA

Bit 0: Firewall pre alarm.

Allowed values:
0: PreArmReset: Any code executed outside the protected segment when the Firewall is opened will generate a system reset
1: PreArmSet: Any code executed outside the protected segment will close the Firewall

VDS

Bit 1: Volatile data shared.

Allowed values:
0: NotShared: Volatile data segment is not shared and cannot be hit by a non protected executable code when the Firewall is closed
1: Shared: Volatile data segment is shared with non protected application code

VDE

Bit 2: Volatile data execution.

Allowed values:
0: NotExecutable: Volatile data segment cannot be executed if VDS = 0
1: Executable: Volatile data segment is declared executable whatever VDS bit value

FLASH

0x40022000: Flash

4/72 fields covered.

Toggle register map

Offset	Name	31	30	27	26	25	24	23	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	ACR															SLEEP_PD	RUN_PD	DCRST	ICRST	DCEN	ICEN	PRFTEN						LATENCY
0x4	PDKEYR	PDKEYR													PDKEYR
0x8	KEYR	KEYR													KEYR
0xc	OPTKEYR	OPTKEYR													OPTKEYR
0x10	SR													BSY	OPTVERR	RDERR					FASTERR	MISERR	PGSERR	SIZERR	PGAERR	WRPERR	PROGERR		OPERR	EOP
0x14	CR	LOCK	OPTLOCK	OBL_LAUNCH	RDERRIE	ERRIE	EOPIE					FSTPG	OPTSTRT	START	MER2				BKER	PNB								MER1	PER	PG
0x18	ECCR	ECCD	ECCC				ECCIE			SYSF_ECC	BK_ECC	ADDR_ECC			ADDR_ECC
0x20	OPTR			nBOOT0	nSWBOOT0	SRAM2_RST	SRAM2_PE	nBOOT1	DUALBANK	BFB2	WWDG_SW	IWDG_STDBY	IWDG_STOP	IDWG_SW			nRST_STDBY	nRST_STOP		BOR_LEV			RDP
0x24	PCROP1SR														PCROP1_STRT
0x28	PCROP1ER	PCROP_RDP													PCROP1_END
0x2c	WRP1AR							WRP1A_END															WRP1A_STRT
0x30	WRP1BR							WRP1B_STRT															WRP1B_END
0x44	PCROP2SR														PCROP2_STRT
0x48	PCROP2ER														PCROP2_END
0x4c	WRP2AR							WRP2A_END															WRP2A_STRT
0x50	WRP2BR							WRP2B_END															WRP2B_STRT

Toggle registers

ACR

Access control register

Offset: 0x0, size: 32, reset: 0x00000600, access: read-write

0/8 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	SLEEP_PD rw	RUN_PD rw	DCRST rw	ICRST rw	DCEN rw	ICEN rw	PRFTEN rw						LATENCY rw

Toggle fields

LATENCY

Bits 0-2: Latency.

PRFTEN

Bit 8: Prefetch enable.

ICEN

Bit 9: Instruction cache enable.

DCEN

Bit 10: Data cache enable.

ICRST

Bit 11: Instruction cache reset.

DCRST

Bit 12: Data cache reset.

RUN_PD

Bit 13: Flash Power-down mode during Low-power run mode.

SLEEP_PD

Bit 14: Flash Power-down mode during Low-power sleep mode.

PDKEYR

Power down key register

Offset: 0x4, size: 32, reset: 0x00000000, access: write-only

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PDKEYR w
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PDKEYR w

Toggle fields

PDKEYR

Bits 0-31: RUN_PD in FLASH_ACR key.

KEYR

Flash key register

Offset: 0x8, size: 32, reset: 0x00000000, access: write-only

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
KEYR w
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
KEYR w

Toggle fields

KEYR

Bits 0-31: KEYR.

OPTKEYR

Option byte key register

Offset: 0xc, size: 32, reset: 0x00000000, access: write-only

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
OPTKEYR w
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OPTKEYR w

Toggle fields

OPTKEYR

Bits 0-31: Option byte key.

SR

Status register

Offset: 0x10, size: 32, reset: 0x00000000, access: Unspecified

1/12 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
															BSY r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OPTVERR rw	RDERR rw					FASTERR rw	MISERR rw	PGSERR rw	SIZERR rw	PGAERR rw	WRPERR rw	PROGERR rw		OPERR rw	EOP rw

Toggle fields

EOP

Bit 0: End of operation.

OPERR

Bit 1: Operation error.

PROGERR

Bit 3: Programming error.

WRPERR

Bit 4: Write protected error.

PGAERR

Bit 5: Programming alignment error.

SIZERR

Bit 6: Size error.

PGSERR

Bit 7: Programming sequence error.

MISERR

Bit 8: Fast programming data miss error.

FASTERR

Bit 9: Fast programming error.

RDERR

Bit 14: PCROP read error.

OPTVERR

Bit 15: Option validity error.

BSY

Bit 16: Busy.

CR

Flash control register

Offset: 0x14, size: 32, reset: 0xC0000000, access: read-write

0/15 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
LOCK rw	OPTLOCK rw			OBL_LAUNCH rw	RDERRIE rw	ERRIE rw	EOPIE rw						FSTPG rw	OPTSTRT rw	START rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MER2 rw				BKER rw	PNB rw								MER1 rw	PER rw	PG rw

Toggle fields

PG

Bit 0: Programming.

PER

Bit 1: Page erase.

MER1

Bit 2: Bank 1 Mass erase.

PNB

Bits 3-10: Page number.

BKER

Bit 11: Bank erase.

MER2

Bit 15: Bank 2 Mass erase.

START

Bit 16: Start.

OPTSTRT

Bit 17: Options modification start.

FSTPG

Bit 18: Fast programming.

EOPIE

Bit 24: End of operation interrupt enable.

ERRIE

Bit 25: Error interrupt enable.

RDERRIE

Bit 26: PCROP read error interrupt enable.

OBL_LAUNCH

Bit 27: Force the option byte loading.

OPTLOCK

Bit 30: Options Lock.

LOCK

Bit 31: FLASH_CR Lock.

ECCR

Flash ECC register

Offset: 0x18, size: 32, reset: 0x00000000, access: Unspecified

3/6 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
ECCD rw	ECCC rw						ECCIE rw				SYSF_ECC r	BK_ECC r	ADDR_ECC r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ADDR_ECC r

Toggle fields

ADDR_ECC

Bits 0-18: ECC fail address.

BK_ECC

Bit 19: ECC fail bank.

SYSF_ECC

Bit 20: System Flash ECC fail.

ECCIE

Bit 24: ECC correction interrupt enable.

ECCC

Bit 30: ECC correction.

ECCD

Bit 31: ECC detection.

OPTR

Flash option register

Offset: 0x20, size: 32, reset: 0xF0000000, access: read-write

0/15 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
				nBOOT0 rw	nSWBOOT0 rw	SRAM2_RST rw	SRAM2_PE rw	nBOOT1 rw		DUALBANK rw	BFB2 rw	WWDG_SW rw	IWDG_STDBY rw	IWDG_STOP rw	IDWG_SW rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		nRST_STDBY rw	nRST_STOP rw		BOR_LEV rw			RDP rw

Toggle fields

RDP

Bits 0-7: Read protection level.

BOR_LEV

Bits 8-10: BOR reset Level.

nRST_STOP

Bit 12: nRST_STOP.

nRST_STDBY

Bit 13: nRST_STDBY.

IDWG_SW

Bit 16: Independent watchdog selection.

IWDG_STOP

Bit 17: Independent watchdog counter freeze in Stop mode.

IWDG_STDBY

Bit 18: Independent watchdog counter freeze in Standby mode.

WWDG_SW

Bit 19: Window watchdog selection.

BFB2

Bit 20: Dual-bank boot.

DUALBANK

Bit 21: Dual-Bank on 512 KB or 256 KB Flash memory devices.

nBOOT1

Bit 23: Boot configuration.

SRAM2_PE

Bit 24: SRAM2 parity check enable.

SRAM2_RST

Bit 25: SRAM2 Erase when system reset.

nSWBOOT0

Bit 26: Software BOOT0.

nBOOT0

Bit 27: nBOOT0 option bit.

PCROP1SR

Flash Bank 1 PCROP Start address register

Offset: 0x24, size: 32, reset: 0xFFFF0000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PCROP1_STRT rw

Toggle fields

PCROP1_STRT

Bits 0-15: Bank 1 PCROP area start offset.

PCROP1ER

Flash Bank 1 PCROP End address register

Offset: 0x28, size: 32, reset: 0x0FFF0000, access: read-write

0/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PCROP_RDP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PCROP1_END rw

Toggle fields

PCROP1_END

Bits 0-15: Bank 1 PCROP area end offset.

PCROP_RDP

Bit 31: PCROP area preserved when RDP level decreased.

WRP1AR

Flash Bank 1 WRP area A address register

Offset: 0x2c, size: 32, reset: 0xFF00FF00, access: read-write

0/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								WRP1A_END rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								WRP1A_STRT rw

Toggle fields

WRP1A_STRT

Bits 0-7: Bank 1 WRP first area ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â¦ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦ÃƒÂ¢Ã¢â€šÂ¬Ã…â€œAÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ start offset.

WRP1A_END

Bits 16-23: Bank 1 WRP first area A end offset.

WRP1BR

Flash Bank 1 WRP area B address register

Offset: 0x30, size: 32, reset: 0xFF00FF00, access: read-write

0/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								WRP1B_STRT rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								WRP1B_END rw

Toggle fields

WRP1B_END

Bits 0-7: Bank 1 WRP second area B start offset.

WRP1B_STRT

Bits 16-23: Bank 1 WRP second area B end offset.

PCROP2SR

Flash Bank 2 PCROP Start address register

Offset: 0x44, size: 32, reset: 0xFFFF0000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PCROP2_STRT rw

Toggle fields

PCROP2_STRT

Bits 0-15: Bank 2 PCROP area start offset.

PCROP2ER

Flash Bank 2 PCROP End address register

Offset: 0x48, size: 32, reset: 0xFFFF0000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PCROP2_END rw

Toggle fields

PCROP2_END

Bits 0-15: Bank 2 PCROP area end offset.

WRP2AR

Flash Bank 2 WRP area A address register

Offset: 0x4c, size: 32, reset: 0xFF00FF00, access: read-write

0/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								WRP2A_END rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								WRP2A_STRT rw

Toggle fields

WRP2A_STRT

Bits 0-7: Bank 2 WRP first area A start offset.

WRP2A_END

Bits 16-23: Bank 2 WRP first area A end offset.

WRP2BR

Flash Bank 2 WRP area B address register

Offset: 0x50, size: 32, reset: 0xFF00FF00, access: read-write

0/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								WRP2B_END rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								WRP2B_STRT rw

Toggle fields

WRP2B_STRT

Bits 0-7: Bank 2 WRP second area B start offset.

WRP2B_END

Bits 16-23: Bank 2 WRP second area B end offset.

FPU

0xe000ef34: Floting point unit

0/24 fields covered.

Toggle register map

Offset	Name	31	30	29	28	26	25	24	23	15	8	7	6	5	4	3	2	1	0
0x0	FPCCR	ASPEN	LSPEN								MONRDY		BFRDY	MMRDY	HFRDY	THREAD		USER	LSPACT
0x4	FPCAR	ADDRESS								ADDRESS
0x8	FPSCR	N	Z	C	V	AHP	DN	FZ	RMode			IDC			IXC	UFC	OFC	DZC	IOC

Toggle registers

FPCCR

Floating-point context control register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/9 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
ASPEN rw	LSPEN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							MONRDY rw		BFRDY rw	MMRDY rw	HFRDY rw	THREAD rw		USER rw	LSPACT rw

Toggle fields

LSPACT

Bit 0: LSPACT.

USER

Bit 1: USER.

THREAD

Bit 3: THREAD.

HFRDY

Bit 4: HFRDY.

MMRDY

Bit 5: MMRDY.

BFRDY

Bit 6: BFRDY.

MONRDY

Bit 8: MONRDY.

LSPEN

Bit 30: LSPEN.

ASPEN

Bit 31: ASPEN.

FPCAR

Floating-point context address register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
ADDRESS rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ADDRESS rw

Toggle fields

ADDRESS

Bits 3-31: Location of unpopulated floating-point.

FPSCR

Floating-point status control register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/14 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
N rw	Z rw	C rw	V rw		AHP rw	DN rw	FZ rw	RMode rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								IDC rw			IXC rw	UFC rw	OFC rw	DZC rw	IOC rw

Toggle fields

IOC

Bit 0: Invalid operation cumulative exception bit.

DZC

Bit 1: Division by zero cumulative exception bit..

OFC

Bit 2: Overflow cumulative exception bit.

UFC

Bit 3: Underflow cumulative exception bit.

IXC

Bit 4: Inexact cumulative exception bit.

IDC

Bit 7: Input denormal cumulative exception bit..

RMode

Bits 22-23: Rounding Mode control field.

FZ

Bit 24: Flush-to-zero mode control bit:.

DN

Bit 25: Default NaN mode control bit.

AHP

Bit 26: Alternative half-precision control bit.

V

Bit 28: Overflow condition code flag.

C

Bit 29: Carry condition code flag.

Z

Bit 30: Zero condition code flag.

N

Bit 31: Negative condition code flag.

FPU_CPACR

0xe000ed88: Floating point unit CPACR

0/1 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	CPACR									CP

Toggle registers

CPACR

Coprocessor access control register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								CP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0

Toggle fields

CP

Bits 20-23: CP.

GPIOA

0x48000000: General-purpose I/Os

177/177 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	MODER	MODER[15]		MODER[14]		MODER[13]		MODER[12]		MODER[11]		MODER[10]		MODER[9]		MODER[8]		MODER[7]		MODER[6]		MODER[5]		MODER[4]		MODER[3]		MODER[2]		MODER[1]		MODER[0]
0x4	OTYPER																	OT[15]	OT[14]	OT[13]	OT[12]	OT[11]	OT[10]	OT[9]	OT[8]	OT[7]	OT[6]	OT[5]	OT[4]	OT[3]	OT[2]	OT[1]	OT[0]
0x8	OSPEEDR	OSPEEDR[15]		OSPEEDR[14]		OSPEEDR[13]		OSPEEDR[12]		OSPEEDR[11]		OSPEEDR[10]		OSPEEDR[9]		OSPEEDR[8]		OSPEEDR[7]		OSPEEDR[6]		OSPEEDR[5]		OSPEEDR[4]		OSPEEDR[3]		OSPEEDR[2]		OSPEEDR[1]		OSPEEDR[0]
0xc	PUPDR	PUPDR[15]		PUPDR[14]		PUPDR[13]		PUPDR[12]		PUPDR[11]		PUPDR[10]		PUPDR[9]		PUPDR[8]		PUPDR[7]		PUPDR[6]		PUPDR[5]		PUPDR[4]		PUPDR[3]		PUPDR[2]		PUPDR[1]		PUPDR[0]
0x10	IDR																	IDR[15]	IDR[14]	IDR[13]	IDR[12]	IDR[11]	IDR[10]	IDR[9]	IDR[8]	IDR[7]	IDR[6]	IDR[5]	IDR[4]	IDR[3]	IDR[2]	IDR[1]	IDR[0]
0x14	ODR																	ODR[15]	ODR[14]	ODR[13]	ODR[12]	ODR[11]	ODR[10]	ODR[9]	ODR[8]	ODR[7]	ODR[6]	ODR[5]	ODR[4]	ODR[3]	ODR[2]	ODR[1]	ODR[0]
0x18	BSRR	BR[15]	BR[14]	BR[13]	BR[12]	BR[11]	BR[10]	BR[9]	BR[8]	BR[7]	BR[6]	BR[5]	BR[4]	BR[3]	BR[2]	BR[1]	BR[0]	BS[15]	BS[14]	BS[13]	BS[12]	BS[11]	BS[10]	BS[9]	BS[8]	BS[7]	BS[6]	BS[5]	BS[4]	BS[3]	BS[2]	BS[1]	BS[0]
0x1c	LCKR																LCKK	LCK[15]	LCK[14]	LCK[13]	LCK[12]	LCK[11]	LCK[10]	LCK[9]	LCK[8]	LCK[7]	LCK[6]	LCK[5]	LCK[4]	LCK[3]	LCK[2]	LCK[1]	LCK[0]
0x20	AFRL	AFR[L7]				AFR[L6]				AFR[L5]				AFR[L4]				AFR[L3]				AFR[L2]				AFR[L1]				AFR[L0]
0x24	AFRH	AFR[H15]				AFR[H14]				AFR[H13]				AFR[H12]				AFR[H11]				AFR[H10]				AFR[H9]				AFR[H8]
0x28	BRR																	BR[15]	BR[14]	BR[13]	BR[12]	BR[11]	BR[10]	BR[9]	BR[8]	BR[7]	BR[6]	BR[5]	BR[4]	BR[3]	BR[2]	BR[1]	BR[0]

Toggle registers

MODER

GPIO port mode register

Offset: 0x0, size: 32, reset: 0xA8000000, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MODER[15] rw		MODER[14] rw		MODER[13] rw		MODER[12] rw		MODER[11] rw		MODER[10] rw		MODER[9] rw		MODER[8] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MODER[7] rw		MODER[6] rw		MODER[5] rw		MODER[4] rw		MODER[3] rw		MODER[2] rw		MODER[1] rw		MODER[0] rw

Toggle fields

MODER[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OT[15] rw	OT[14] rw	OT[13] rw	OT[12] rw	OT[11] rw	OT[10] rw	OT[9] rw	OT[8] rw	OT[7] rw	OT[6] rw	OT[5] rw	OT[4] rw	OT[3] rw	OT[2] rw	OT[1] rw	OT[0] rw

Toggle fields

OT[0]

Bit 0: Port x configuration pin 0.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[1]

Bit 1: Port x configuration pin 1.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[2]

Bit 2: Port x configuration pin 2.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[3]

Bit 3: Port x configuration pin 3.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[4]

Bit 4: Port x configuration pin 4.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[5]

Bit 5: Port x configuration pin 5.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[6]

Bit 6: Port x configuration pin 6.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[7]

Bit 7: Port x configuration pin 7.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[8]

Bit 8: Port x configuration pin 8.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[9]

Bit 9: Port x configuration pin 9.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[10]

Bit 10: Port x configuration pin 10.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[11]

Bit 11: Port x configuration pin 11.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[12]

Bit 12: Port x configuration pin 12.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[13]

Bit 13: Port x configuration pin 13.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[14]

Bit 14: Port x configuration pin 14.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[15]

Bit 15: Port x configuration pin 15.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
OSPEEDR[15] rw		OSPEEDR[14] rw		OSPEEDR[13] rw		OSPEEDR[12] rw		OSPEEDR[11] rw		OSPEEDR[10] rw		OSPEEDR[9] rw		OSPEEDR[8] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OSPEEDR[7] rw		OSPEEDR[6] rw		OSPEEDR[5] rw		OSPEEDR[4] rw		OSPEEDR[3] rw		OSPEEDR[2] rw		OSPEEDR[1] rw		OSPEEDR[0] rw

Toggle fields

OSPEEDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xc, size: 32, reset: 0x64000000, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PUPDR[15] rw		PUPDR[14] rw		PUPDR[13] rw		PUPDR[12] rw		PUPDR[11] rw		PUPDR[10] rw		PUPDR[9] rw		PUPDR[8] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PUPDR[7] rw		PUPDR[6] rw		PUPDR[5] rw		PUPDR[4] rw		PUPDR[3] rw		PUPDR[2] rw		PUPDR[1] rw		PUPDR[0] rw

Toggle fields

PUPDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-only

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IDR[15] r	IDR[14] r	IDR[13] r	IDR[12] r	IDR[11] r	IDR[10] r	IDR[9] r	IDR[8] r	IDR[7] r	IDR[6] r	IDR[5] r	IDR[4] r	IDR[3] r	IDR[2] r	IDR[1] r	IDR[0] r

Toggle fields

IDR[0]

Bit 0: Port input data pin 0.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[1]

Bit 1: Port input data pin 1.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[2]

Bit 2: Port input data pin 2.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[3]

Bit 3: Port input data pin 3.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[4]

Bit 4: Port input data pin 4.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[5]

Bit 5: Port input data pin 5.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[6]

Bit 6: Port input data pin 6.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[7]

Bit 7: Port input data pin 7.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[8]

Bit 8: Port input data pin 8.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[9]

Bit 9: Port input data pin 9.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[10]

Bit 10: Port input data pin 10.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[11]

Bit 11: Port input data pin 11.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[12]

Bit 12: Port input data pin 12.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[13]

Bit 13: Port input data pin 13.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[14]

Bit 14: Port input data pin 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[15]

Bit 15: Port input data pin 15.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ODR

GPIO port output data register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ODR[15] rw	ODR[14] rw	ODR[13] rw	ODR[12] rw	ODR[11] rw	ODR[10] rw	ODR[9] rw	ODR[8] rw	ODR[7] rw	ODR[6] rw	ODR[5] rw	ODR[4] rw	ODR[3] rw	ODR[2] rw	ODR[1] rw	ODR[0] rw

Toggle fields

ODR[0]

Bit 0: Port output data pin 0.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[1]

Bit 1: Port output data pin 1.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[2]

Bit 2: Port output data pin 2.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[3]

Bit 3: Port output data pin 3.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[4]

Bit 4: Port output data pin 4.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[5]

Bit 5: Port output data pin 5.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[6]

Bit 6: Port output data pin 6.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[7]

Bit 7: Port output data pin 7.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[8]

Bit 8: Port output data pin 8.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[9]

Bit 9: Port output data pin 9.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[10]

Bit 10: Port output data pin 10.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[11]

Bit 11: Port output data pin 11.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[12]

Bit 12: Port output data pin 12.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[13]

Bit 13: Port output data pin 13.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[14]

Bit 14: Port output data pin 14.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[15]

Bit 15: Port output data pin 15.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

BSRR

GPIO port bit set/reset register

Offset: 0x18, size: 32, reset: 0x00000000, access: write-only

32/32 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BR[15] w	BR[14] w	BR[13] w	BR[12] w	BR[11] w	BR[10] w	BR[9] w	BR[8] w	BR[7] w	BR[6] w	BR[5] w	BR[4] w	BR[3] w	BR[2] w	BR[1] w	BR[0] w
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BS[15] w	BS[14] w	BS[13] w	BS[12] w	BS[11] w	BS[10] w	BS[9] w	BS[8] w	BS[7] w	BS[6] w	BS[5] w	BS[4] w	BS[3] w	BS[2] w	BS[1] w	BS[0] w

Toggle fields

BS[0]

Bit 0: Port x set pin 0.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[1]

Bit 1: Port x set pin 1.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[2]

Bit 2: Port x set pin 2.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[3]

Bit 3: Port x set pin 3.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[4]

Bit 4: Port x set pin 4.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[5]

Bit 5: Port x set pin 5.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[6]

Bit 6: Port x set pin 6.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[7]

Bit 7: Port x set pin 7.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[8]

Bit 8: Port x set pin 8.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[9]

Bit 9: Port x set pin 9.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[10]

Bit 10: Port x set pin 10.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[11]

Bit 11: Port x set pin 11.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[12]

Bit 12: Port x set pin 12.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[13]

Bit 13: Port x set pin 13.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[14]

Bit 14: Port x set pin 14.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[15]

Bit 15: Port x set pin 15.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BR[0]

Bit 16: Port x reset pin 0.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[1]

Bit 17: Port x reset pin 1.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[2]

Bit 18: Port x reset pin 2.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[3]

Bit 19: Port x reset pin 3.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[4]

Bit 20: Port x reset pin 4.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[5]

Bit 21: Port x reset pin 5.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[6]

Bit 22: Port x reset pin 6.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[7]

Bit 23: Port x reset pin 7.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[8]

Bit 24: Port x reset pin 8.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[9]

Bit 25: Port x reset pin 9.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[10]

Bit 26: Port x reset pin 10.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[11]

Bit 27: Port x reset pin 11.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[12]

Bit 28: Port x reset pin 12.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[13]

Bit 29: Port x reset pin 13.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[14]

Bit 30: Port x reset pin 14.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[15]

Bit 31: Port x reset pin 15.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

LCKR

GPIO port configuration lock register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

17/17 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
															LCKK rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
LCK[15] rw	LCK[14] rw	LCK[13] rw	LCK[12] rw	LCK[11] rw	LCK[10] rw	LCK[9] rw	LCK[8] rw	LCK[7] rw	LCK[6] rw	LCK[5] rw	LCK[4] rw	LCK[3] rw	LCK[2] rw	LCK[1] rw	LCK[0] rw

Toggle fields

LCK[0]

Bit 0: Port x lock pin 0.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[1]

Bit 1: Port x lock pin 1.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[2]

Bit 2: Port x lock pin 2.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[3]

Bit 3: Port x lock pin 3.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[4]

Bit 4: Port x lock pin 4.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[5]

Bit 5: Port x lock pin 5.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[6]

Bit 6: Port x lock pin 6.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[7]

Bit 7: Port x lock pin 7.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[8]

Bit 8: Port x lock pin 8.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[9]

Bit 9: Port x lock pin 9.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[10]

Bit 10: Port x lock pin 10.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[11]

Bit 11: Port x lock pin 11.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[12]

Bit 12: Port x lock pin 12.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[13]

Bit 13: Port x lock pin 13.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[14]

Bit 14: Port x lock pin 14.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[15]

Bit 15: Port x lock pin 15.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AFR[L7] rw				AFR[L6] rw				AFR[L5] rw				AFR[L4] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AFR[L3] rw				AFR[L2] rw				AFR[L1] rw				AFR[L0] rw

Toggle fields

AFR[L0]

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L1]

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L2]

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L3]

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L4]

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L5]

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L6]

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L7]

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH

GPIO alternate function high register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AFR[H15] rw				AFR[H14] rw				AFR[H13] rw				AFR[H12] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AFR[H11] rw				AFR[H10] rw				AFR[H9] rw				AFR[H8] rw

Toggle fields

AFR[H8]

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H9]

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H10]

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H11]

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H12]

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H13]

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H14]

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H15]

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

BRR

GPIO port bit reset register

Offset: 0x28, size: 32, reset: 0x00000000, access: Unspecified

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BR[15] N/A	BR[14] N/A	BR[13] N/A	BR[12] N/A	BR[11] N/A	BR[10] N/A	BR[9] N/A	BR[8] N/A	BR[7] N/A	BR[6] N/A	BR[5] N/A	BR[4] N/A	BR[3] N/A	BR[2] N/A	BR[1] N/A	BR[0] N/A

Toggle fields

BR[0]

Bit 0: Port x reset pin 0.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[1]

Bit 1: Port x reset pin 1.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[2]

Bit 2: Port x reset pin 2.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[3]

Bit 3: Port x reset pin 3.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[4]

Bit 4: Port x reset pin 4.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[5]

Bit 5: Port x reset pin 5.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[6]

Bit 6: Port x reset pin 6.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[7]

Bit 7: Port x reset pin 7.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[8]

Bit 8: Port x reset pin 8.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[9]

Bit 9: Port x reset pin 9.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[10]

Bit 10: Port x reset pin 10.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[11]

Bit 11: Port x reset pin 11.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[12]

Bit 12: Port x reset pin 12.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[13]

Bit 13: Port x reset pin 13.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[14]

Bit 14: Port x reset pin 14.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[15]

Bit 15: Port x reset pin 15.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

GPIOB

0x48000400: General-purpose I/Os

177/177 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	MODER	MODER[15]		MODER[14]		MODER[13]		MODER[12]		MODER[11]		MODER[10]		MODER[9]		MODER[8]		MODER[7]		MODER[6]		MODER[5]		MODER[4]		MODER[3]		MODER[2]		MODER[1]		MODER[0]
0x4	OTYPER																	OT[15]	OT[14]	OT[13]	OT[12]	OT[11]	OT[10]	OT[9]	OT[8]	OT[7]	OT[6]	OT[5]	OT[4]	OT[3]	OT[2]	OT[1]	OT[0]
0x8	OSPEEDR	OSPEEDR[15]		OSPEEDR[14]		OSPEEDR[13]		OSPEEDR[12]		OSPEEDR[11]		OSPEEDR[10]		OSPEEDR[9]		OSPEEDR[8]		OSPEEDR[7]		OSPEEDR[6]		OSPEEDR[5]		OSPEEDR[4]		OSPEEDR[3]		OSPEEDR[2]		OSPEEDR[1]		OSPEEDR[0]
0xc	PUPDR	PUPDR[15]		PUPDR[14]		PUPDR[13]		PUPDR[12]		PUPDR[11]		PUPDR[10]		PUPDR[9]		PUPDR[8]		PUPDR[7]		PUPDR[6]		PUPDR[5]		PUPDR[4]		PUPDR[3]		PUPDR[2]		PUPDR[1]		PUPDR[0]
0x10	IDR																	IDR[15]	IDR[14]	IDR[13]	IDR[12]	IDR[11]	IDR[10]	IDR[9]	IDR[8]	IDR[7]	IDR[6]	IDR[5]	IDR[4]	IDR[3]	IDR[2]	IDR[1]	IDR[0]
0x14	ODR																	ODR[15]	ODR[14]	ODR[13]	ODR[12]	ODR[11]	ODR[10]	ODR[9]	ODR[8]	ODR[7]	ODR[6]	ODR[5]	ODR[4]	ODR[3]	ODR[2]	ODR[1]	ODR[0]
0x18	BSRR	BR[15]	BR[14]	BR[13]	BR[12]	BR[11]	BR[10]	BR[9]	BR[8]	BR[7]	BR[6]	BR[5]	BR[4]	BR[3]	BR[2]	BR[1]	BR[0]	BS[15]	BS[14]	BS[13]	BS[12]	BS[11]	BS[10]	BS[9]	BS[8]	BS[7]	BS[6]	BS[5]	BS[4]	BS[3]	BS[2]	BS[1]	BS[0]
0x1c	LCKR																LCKK	LCK[15]	LCK[14]	LCK[13]	LCK[12]	LCK[11]	LCK[10]	LCK[9]	LCK[8]	LCK[7]	LCK[6]	LCK[5]	LCK[4]	LCK[3]	LCK[2]	LCK[1]	LCK[0]
0x20	AFRL	AFR[L7]				AFR[L6]				AFR[L5]				AFR[L4]				AFR[L3]				AFR[L2]				AFR[L1]				AFR[L0]
0x24	AFRH	AFR[H15]				AFR[H14]				AFR[H13]				AFR[H12]				AFR[H11]				AFR[H10]				AFR[H9]				AFR[H8]
0x28	BRR																	BR[15]	BR[14]	BR[13]	BR[12]	BR[11]	BR[10]	BR[9]	BR[8]	BR[7]	BR[6]	BR[5]	BR[4]	BR[3]	BR[2]	BR[1]	BR[0]

Toggle registers

MODER

GPIO port mode register

Offset: 0x0, size: 32, reset: 0x00000280, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MODER[15] rw		MODER[14] rw		MODER[13] rw		MODER[12] rw		MODER[11] rw		MODER[10] rw		MODER[9] rw		MODER[8] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MODER[7] rw		MODER[6] rw		MODER[5] rw		MODER[4] rw		MODER[3] rw		MODER[2] rw		MODER[1] rw		MODER[0] rw

Toggle fields

MODER[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OT[15] rw	OT[14] rw	OT[13] rw	OT[12] rw	OT[11] rw	OT[10] rw	OT[9] rw	OT[8] rw	OT[7] rw	OT[6] rw	OT[5] rw	OT[4] rw	OT[3] rw	OT[2] rw	OT[1] rw	OT[0] rw

Toggle fields

OT[0]

Bit 0: Port x configuration pin 0.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[1]

Bit 1: Port x configuration pin 1.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[2]

Bit 2: Port x configuration pin 2.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[3]

Bit 3: Port x configuration pin 3.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[4]

Bit 4: Port x configuration pin 4.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[5]

Bit 5: Port x configuration pin 5.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[6]

Bit 6: Port x configuration pin 6.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[7]

Bit 7: Port x configuration pin 7.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[8]

Bit 8: Port x configuration pin 8.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[9]

Bit 9: Port x configuration pin 9.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[10]

Bit 10: Port x configuration pin 10.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[11]

Bit 11: Port x configuration pin 11.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[12]

Bit 12: Port x configuration pin 12.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[13]

Bit 13: Port x configuration pin 13.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[14]

Bit 14: Port x configuration pin 14.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[15]

Bit 15: Port x configuration pin 15.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, size: 32, reset: 0x000000C0, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
OSPEEDR[15] rw		OSPEEDR[14] rw		OSPEEDR[13] rw		OSPEEDR[12] rw		OSPEEDR[11] rw		OSPEEDR[10] rw		OSPEEDR[9] rw		OSPEEDR[8] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OSPEEDR[7] rw		OSPEEDR[6] rw		OSPEEDR[5] rw		OSPEEDR[4] rw		OSPEEDR[3] rw		OSPEEDR[2] rw		OSPEEDR[1] rw		OSPEEDR[0] rw

Toggle fields

OSPEEDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xc, size: 32, reset: 0x00000100, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PUPDR[15] rw		PUPDR[14] rw		PUPDR[13] rw		PUPDR[12] rw		PUPDR[11] rw		PUPDR[10] rw		PUPDR[9] rw		PUPDR[8] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PUPDR[7] rw		PUPDR[6] rw		PUPDR[5] rw		PUPDR[4] rw		PUPDR[3] rw		PUPDR[2] rw		PUPDR[1] rw		PUPDR[0] rw

Toggle fields

PUPDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-only

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IDR[15] r	IDR[14] r	IDR[13] r	IDR[12] r	IDR[11] r	IDR[10] r	IDR[9] r	IDR[8] r	IDR[7] r	IDR[6] r	IDR[5] r	IDR[4] r	IDR[3] r	IDR[2] r	IDR[1] r	IDR[0] r

Toggle fields

IDR[0]

Bit 0: Port input data pin 0.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[1]

Bit 1: Port input data pin 1.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[2]

Bit 2: Port input data pin 2.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[3]

Bit 3: Port input data pin 3.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[4]

Bit 4: Port input data pin 4.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[5]

Bit 5: Port input data pin 5.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[6]

Bit 6: Port input data pin 6.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[7]

Bit 7: Port input data pin 7.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[8]

Bit 8: Port input data pin 8.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[9]

Bit 9: Port input data pin 9.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[10]

Bit 10: Port input data pin 10.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[11]

Bit 11: Port input data pin 11.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[12]

Bit 12: Port input data pin 12.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[13]

Bit 13: Port input data pin 13.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[14]

Bit 14: Port input data pin 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[15]

Bit 15: Port input data pin 15.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ODR

GPIO port output data register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ODR[15] rw	ODR[14] rw	ODR[13] rw	ODR[12] rw	ODR[11] rw	ODR[10] rw	ODR[9] rw	ODR[8] rw	ODR[7] rw	ODR[6] rw	ODR[5] rw	ODR[4] rw	ODR[3] rw	ODR[2] rw	ODR[1] rw	ODR[0] rw

Toggle fields

ODR[0]

Bit 0: Port output data pin 0.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[1]

Bit 1: Port output data pin 1.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[2]

Bit 2: Port output data pin 2.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[3]

Bit 3: Port output data pin 3.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[4]

Bit 4: Port output data pin 4.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[5]

Bit 5: Port output data pin 5.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[6]

Bit 6: Port output data pin 6.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[7]

Bit 7: Port output data pin 7.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[8]

Bit 8: Port output data pin 8.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[9]

Bit 9: Port output data pin 9.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[10]

Bit 10: Port output data pin 10.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[11]

Bit 11: Port output data pin 11.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[12]

Bit 12: Port output data pin 12.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[13]

Bit 13: Port output data pin 13.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[14]

Bit 14: Port output data pin 14.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[15]

Bit 15: Port output data pin 15.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

BSRR

GPIO port bit set/reset register

Offset: 0x18, size: 32, reset: 0x00000000, access: write-only

32/32 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BR[15] w	BR[14] w	BR[13] w	BR[12] w	BR[11] w	BR[10] w	BR[9] w	BR[8] w	BR[7] w	BR[6] w	BR[5] w	BR[4] w	BR[3] w	BR[2] w	BR[1] w	BR[0] w
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BS[15] w	BS[14] w	BS[13] w	BS[12] w	BS[11] w	BS[10] w	BS[9] w	BS[8] w	BS[7] w	BS[6] w	BS[5] w	BS[4] w	BS[3] w	BS[2] w	BS[1] w	BS[0] w

Toggle fields

BS[0]

Bit 0: Port x set pin 0.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[1]

Bit 1: Port x set pin 1.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[2]

Bit 2: Port x set pin 2.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[3]

Bit 3: Port x set pin 3.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[4]

Bit 4: Port x set pin 4.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[5]

Bit 5: Port x set pin 5.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[6]

Bit 6: Port x set pin 6.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[7]

Bit 7: Port x set pin 7.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[8]

Bit 8: Port x set pin 8.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[9]

Bit 9: Port x set pin 9.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[10]

Bit 10: Port x set pin 10.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[11]

Bit 11: Port x set pin 11.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[12]

Bit 12: Port x set pin 12.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[13]

Bit 13: Port x set pin 13.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[14]

Bit 14: Port x set pin 14.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[15]

Bit 15: Port x set pin 15.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BR[0]

Bit 16: Port x reset pin 0.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[1]

Bit 17: Port x reset pin 1.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[2]

Bit 18: Port x reset pin 2.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[3]

Bit 19: Port x reset pin 3.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[4]

Bit 20: Port x reset pin 4.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[5]

Bit 21: Port x reset pin 5.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[6]

Bit 22: Port x reset pin 6.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[7]

Bit 23: Port x reset pin 7.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[8]

Bit 24: Port x reset pin 8.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[9]

Bit 25: Port x reset pin 9.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[10]

Bit 26: Port x reset pin 10.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[11]

Bit 27: Port x reset pin 11.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[12]

Bit 28: Port x reset pin 12.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[13]

Bit 29: Port x reset pin 13.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[14]

Bit 30: Port x reset pin 14.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[15]

Bit 31: Port x reset pin 15.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

LCKR

GPIO port configuration lock register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

17/17 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
															LCKK rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
LCK[15] rw	LCK[14] rw	LCK[13] rw	LCK[12] rw	LCK[11] rw	LCK[10] rw	LCK[9] rw	LCK[8] rw	LCK[7] rw	LCK[6] rw	LCK[5] rw	LCK[4] rw	LCK[3] rw	LCK[2] rw	LCK[1] rw	LCK[0] rw

Toggle fields

LCK[0]

Bit 0: Port x lock pin 0.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[1]

Bit 1: Port x lock pin 1.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[2]

Bit 2: Port x lock pin 2.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[3]

Bit 3: Port x lock pin 3.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[4]

Bit 4: Port x lock pin 4.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[5]

Bit 5: Port x lock pin 5.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[6]

Bit 6: Port x lock pin 6.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[7]

Bit 7: Port x lock pin 7.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[8]

Bit 8: Port x lock pin 8.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[9]

Bit 9: Port x lock pin 9.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[10]

Bit 10: Port x lock pin 10.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[11]

Bit 11: Port x lock pin 11.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[12]

Bit 12: Port x lock pin 12.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[13]

Bit 13: Port x lock pin 13.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[14]

Bit 14: Port x lock pin 14.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[15]

Bit 15: Port x lock pin 15.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AFR[L7] rw				AFR[L6] rw				AFR[L5] rw				AFR[L4] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AFR[L3] rw				AFR[L2] rw				AFR[L1] rw				AFR[L0] rw

Toggle fields

AFR[L0]

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L1]

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L2]

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L3]

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L4]

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L5]

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L6]

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L7]

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH

GPIO alternate function high register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AFR[H15] rw				AFR[H14] rw				AFR[H13] rw				AFR[H12] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AFR[H11] rw				AFR[H10] rw				AFR[H9] rw				AFR[H8] rw

Toggle fields

AFR[H8]

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H9]

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H10]

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H11]

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H12]

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H13]

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H14]

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H15]

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

BRR

GPIO port bit reset register

Offset: 0x28, size: 32, reset: 0x00000000, access: Unspecified

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BR[15] N/A	BR[14] N/A	BR[13] N/A	BR[12] N/A	BR[11] N/A	BR[10] N/A	BR[9] N/A	BR[8] N/A	BR[7] N/A	BR[6] N/A	BR[5] N/A	BR[4] N/A	BR[3] N/A	BR[2] N/A	BR[1] N/A	BR[0] N/A

Toggle fields

BR[0]

Bit 0: Port x reset pin 0.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[1]

Bit 1: Port x reset pin 1.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[2]

Bit 2: Port x reset pin 2.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[3]

Bit 3: Port x reset pin 3.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[4]

Bit 4: Port x reset pin 4.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[5]

Bit 5: Port x reset pin 5.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[6]

Bit 6: Port x reset pin 6.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[7]

Bit 7: Port x reset pin 7.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[8]

Bit 8: Port x reset pin 8.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[9]

Bit 9: Port x reset pin 9.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[10]

Bit 10: Port x reset pin 10.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[11]

Bit 11: Port x reset pin 11.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[12]

Bit 12: Port x reset pin 12.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[13]

Bit 13: Port x reset pin 13.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[14]

Bit 14: Port x reset pin 14.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[15]

Bit 15: Port x reset pin 15.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

GPIOC

0x48000800: General-purpose I/Os

177/177 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	MODER	MODER[15]		MODER[14]		MODER[13]		MODER[12]		MODER[11]		MODER[10]		MODER[9]		MODER[8]		MODER[7]		MODER[6]		MODER[5]		MODER[4]		MODER[3]		MODER[2]		MODER[1]		MODER[0]
0x4	OTYPER																	OT[15]	OT[14]	OT[13]	OT[12]	OT[11]	OT[10]	OT[9]	OT[8]	OT[7]	OT[6]	OT[5]	OT[4]	OT[3]	OT[2]	OT[1]	OT[0]
0x8	OSPEEDR	OSPEEDR[15]		OSPEEDR[14]		OSPEEDR[13]		OSPEEDR[12]		OSPEEDR[11]		OSPEEDR[10]		OSPEEDR[9]		OSPEEDR[8]		OSPEEDR[7]		OSPEEDR[6]		OSPEEDR[5]		OSPEEDR[4]		OSPEEDR[3]		OSPEEDR[2]		OSPEEDR[1]		OSPEEDR[0]
0xc	PUPDR	PUPDR[15]		PUPDR[14]		PUPDR[13]		PUPDR[12]		PUPDR[11]		PUPDR[10]		PUPDR[9]		PUPDR[8]		PUPDR[7]		PUPDR[6]		PUPDR[5]		PUPDR[4]		PUPDR[3]		PUPDR[2]		PUPDR[1]		PUPDR[0]
0x10	IDR																	IDR[15]	IDR[14]	IDR[13]	IDR[12]	IDR[11]	IDR[10]	IDR[9]	IDR[8]	IDR[7]	IDR[6]	IDR[5]	IDR[4]	IDR[3]	IDR[2]	IDR[1]	IDR[0]
0x14	ODR																	ODR[15]	ODR[14]	ODR[13]	ODR[12]	ODR[11]	ODR[10]	ODR[9]	ODR[8]	ODR[7]	ODR[6]	ODR[5]	ODR[4]	ODR[3]	ODR[2]	ODR[1]	ODR[0]
0x18	BSRR	BR[15]	BR[14]	BR[13]	BR[12]	BR[11]	BR[10]	BR[9]	BR[8]	BR[7]	BR[6]	BR[5]	BR[4]	BR[3]	BR[2]	BR[1]	BR[0]	BS[15]	BS[14]	BS[13]	BS[12]	BS[11]	BS[10]	BS[9]	BS[8]	BS[7]	BS[6]	BS[5]	BS[4]	BS[3]	BS[2]	BS[1]	BS[0]
0x1c	LCKR																LCKK	LCK[15]	LCK[14]	LCK[13]	LCK[12]	LCK[11]	LCK[10]	LCK[9]	LCK[8]	LCK[7]	LCK[6]	LCK[5]	LCK[4]	LCK[3]	LCK[2]	LCK[1]	LCK[0]
0x20	AFRL	AFR[L7]				AFR[L6]				AFR[L5]				AFR[L4]				AFR[L3]				AFR[L2]				AFR[L1]				AFR[L0]
0x24	AFRH	AFR[H15]				AFR[H14]				AFR[H13]				AFR[H12]				AFR[H11]				AFR[H10]				AFR[H9]				AFR[H8]
0x28	BRR																	BR[15]	BR[14]	BR[13]	BR[12]	BR[11]	BR[10]	BR[9]	BR[8]	BR[7]	BR[6]	BR[5]	BR[4]	BR[3]	BR[2]	BR[1]	BR[0]

Toggle registers

MODER

GPIO port mode register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MODER[15] rw		MODER[14] rw		MODER[13] rw		MODER[12] rw		MODER[11] rw		MODER[10] rw		MODER[9] rw		MODER[8] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MODER[7] rw		MODER[6] rw		MODER[5] rw		MODER[4] rw		MODER[3] rw		MODER[2] rw		MODER[1] rw		MODER[0] rw

Toggle fields

MODER[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OT[15] rw	OT[14] rw	OT[13] rw	OT[12] rw	OT[11] rw	OT[10] rw	OT[9] rw	OT[8] rw	OT[7] rw	OT[6] rw	OT[5] rw	OT[4] rw	OT[3] rw	OT[2] rw	OT[1] rw	OT[0] rw

Toggle fields

OT[0]

Bit 0: Port x configuration pin 0.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[1]

Bit 1: Port x configuration pin 1.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[2]

Bit 2: Port x configuration pin 2.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[3]

Bit 3: Port x configuration pin 3.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[4]

Bit 4: Port x configuration pin 4.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[5]

Bit 5: Port x configuration pin 5.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[6]

Bit 6: Port x configuration pin 6.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[7]

Bit 7: Port x configuration pin 7.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[8]

Bit 8: Port x configuration pin 8.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[9]

Bit 9: Port x configuration pin 9.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[10]

Bit 10: Port x configuration pin 10.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[11]

Bit 11: Port x configuration pin 11.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[12]

Bit 12: Port x configuration pin 12.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[13]

Bit 13: Port x configuration pin 13.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[14]

Bit 14: Port x configuration pin 14.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[15]

Bit 15: Port x configuration pin 15.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
OSPEEDR[15] rw		OSPEEDR[14] rw		OSPEEDR[13] rw		OSPEEDR[12] rw		OSPEEDR[11] rw		OSPEEDR[10] rw		OSPEEDR[9] rw		OSPEEDR[8] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OSPEEDR[7] rw		OSPEEDR[6] rw		OSPEEDR[5] rw		OSPEEDR[4] rw		OSPEEDR[3] rw		OSPEEDR[2] rw		OSPEEDR[1] rw		OSPEEDR[0] rw

Toggle fields

OSPEEDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PUPDR[15] rw		PUPDR[14] rw		PUPDR[13] rw		PUPDR[12] rw		PUPDR[11] rw		PUPDR[10] rw		PUPDR[9] rw		PUPDR[8] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PUPDR[7] rw		PUPDR[6] rw		PUPDR[5] rw		PUPDR[4] rw		PUPDR[3] rw		PUPDR[2] rw		PUPDR[1] rw		PUPDR[0] rw

Toggle fields

PUPDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-only

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IDR[15] r	IDR[14] r	IDR[13] r	IDR[12] r	IDR[11] r	IDR[10] r	IDR[9] r	IDR[8] r	IDR[7] r	IDR[6] r	IDR[5] r	IDR[4] r	IDR[3] r	IDR[2] r	IDR[1] r	IDR[0] r

Toggle fields

IDR[0]

Bit 0: Port input data pin 0.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[1]

Bit 1: Port input data pin 1.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[2]

Bit 2: Port input data pin 2.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[3]

Bit 3: Port input data pin 3.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[4]

Bit 4: Port input data pin 4.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[5]

Bit 5: Port input data pin 5.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[6]

Bit 6: Port input data pin 6.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[7]

Bit 7: Port input data pin 7.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[8]

Bit 8: Port input data pin 8.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[9]

Bit 9: Port input data pin 9.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[10]

Bit 10: Port input data pin 10.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[11]

Bit 11: Port input data pin 11.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[12]

Bit 12: Port input data pin 12.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[13]

Bit 13: Port input data pin 13.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[14]

Bit 14: Port input data pin 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[15]

Bit 15: Port input data pin 15.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ODR

GPIO port output data register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ODR[15] rw	ODR[14] rw	ODR[13] rw	ODR[12] rw	ODR[11] rw	ODR[10] rw	ODR[9] rw	ODR[8] rw	ODR[7] rw	ODR[6] rw	ODR[5] rw	ODR[4] rw	ODR[3] rw	ODR[2] rw	ODR[1] rw	ODR[0] rw

Toggle fields

ODR[0]

Bit 0: Port output data pin 0.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[1]

Bit 1: Port output data pin 1.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[2]

Bit 2: Port output data pin 2.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[3]

Bit 3: Port output data pin 3.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[4]

Bit 4: Port output data pin 4.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[5]

Bit 5: Port output data pin 5.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[6]

Bit 6: Port output data pin 6.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[7]

Bit 7: Port output data pin 7.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[8]

Bit 8: Port output data pin 8.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[9]

Bit 9: Port output data pin 9.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[10]

Bit 10: Port output data pin 10.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[11]

Bit 11: Port output data pin 11.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[12]

Bit 12: Port output data pin 12.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[13]

Bit 13: Port output data pin 13.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[14]

Bit 14: Port output data pin 14.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[15]

Bit 15: Port output data pin 15.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

BSRR

GPIO port bit set/reset register

Offset: 0x18, size: 32, reset: 0x00000000, access: write-only

32/32 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BR[15] w	BR[14] w	BR[13] w	BR[12] w	BR[11] w	BR[10] w	BR[9] w	BR[8] w	BR[7] w	BR[6] w	BR[5] w	BR[4] w	BR[3] w	BR[2] w	BR[1] w	BR[0] w
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BS[15] w	BS[14] w	BS[13] w	BS[12] w	BS[11] w	BS[10] w	BS[9] w	BS[8] w	BS[7] w	BS[6] w	BS[5] w	BS[4] w	BS[3] w	BS[2] w	BS[1] w	BS[0] w

Toggle fields

BS[0]

Bit 0: Port x set pin 0.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[1]

Bit 1: Port x set pin 1.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[2]

Bit 2: Port x set pin 2.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[3]

Bit 3: Port x set pin 3.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[4]

Bit 4: Port x set pin 4.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[5]

Bit 5: Port x set pin 5.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[6]

Bit 6: Port x set pin 6.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[7]

Bit 7: Port x set pin 7.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[8]

Bit 8: Port x set pin 8.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[9]

Bit 9: Port x set pin 9.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[10]

Bit 10: Port x set pin 10.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[11]

Bit 11: Port x set pin 11.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[12]

Bit 12: Port x set pin 12.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[13]

Bit 13: Port x set pin 13.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[14]

Bit 14: Port x set pin 14.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[15]

Bit 15: Port x set pin 15.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BR[0]

Bit 16: Port x reset pin 0.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[1]

Bit 17: Port x reset pin 1.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[2]

Bit 18: Port x reset pin 2.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[3]

Bit 19: Port x reset pin 3.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[4]

Bit 20: Port x reset pin 4.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[5]

Bit 21: Port x reset pin 5.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[6]

Bit 22: Port x reset pin 6.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[7]

Bit 23: Port x reset pin 7.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[8]

Bit 24: Port x reset pin 8.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[9]

Bit 25: Port x reset pin 9.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[10]

Bit 26: Port x reset pin 10.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[11]

Bit 27: Port x reset pin 11.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[12]

Bit 28: Port x reset pin 12.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[13]

Bit 29: Port x reset pin 13.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[14]

Bit 30: Port x reset pin 14.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[15]

Bit 31: Port x reset pin 15.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

LCKR

GPIO port configuration lock register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

17/17 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
															LCKK rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
LCK[15] rw	LCK[14] rw	LCK[13] rw	LCK[12] rw	LCK[11] rw	LCK[10] rw	LCK[9] rw	LCK[8] rw	LCK[7] rw	LCK[6] rw	LCK[5] rw	LCK[4] rw	LCK[3] rw	LCK[2] rw	LCK[1] rw	LCK[0] rw

Toggle fields

LCK[0]

Bit 0: Port x lock pin 0.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[1]

Bit 1: Port x lock pin 1.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[2]

Bit 2: Port x lock pin 2.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[3]

Bit 3: Port x lock pin 3.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[4]

Bit 4: Port x lock pin 4.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[5]

Bit 5: Port x lock pin 5.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[6]

Bit 6: Port x lock pin 6.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[7]

Bit 7: Port x lock pin 7.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[8]

Bit 8: Port x lock pin 8.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[9]

Bit 9: Port x lock pin 9.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[10]

Bit 10: Port x lock pin 10.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[11]

Bit 11: Port x lock pin 11.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[12]

Bit 12: Port x lock pin 12.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[13]

Bit 13: Port x lock pin 13.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[14]

Bit 14: Port x lock pin 14.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[15]

Bit 15: Port x lock pin 15.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AFR[L7] rw				AFR[L6] rw				AFR[L5] rw				AFR[L4] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AFR[L3] rw				AFR[L2] rw				AFR[L1] rw				AFR[L0] rw

Toggle fields

AFR[L0]

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L1]

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L2]

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L3]

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L4]

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L5]

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L6]

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L7]

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH

GPIO alternate function high register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AFR[H15] rw				AFR[H14] rw				AFR[H13] rw				AFR[H12] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AFR[H11] rw				AFR[H10] rw				AFR[H9] rw				AFR[H8] rw

Toggle fields

AFR[H8]

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H9]

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H10]

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H11]

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H12]

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H13]

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H14]

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H15]

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

BRR

GPIO port bit reset register

Offset: 0x28, size: 32, reset: 0x00000000, access: Unspecified

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BR[15] N/A	BR[14] N/A	BR[13] N/A	BR[12] N/A	BR[11] N/A	BR[10] N/A	BR[9] N/A	BR[8] N/A	BR[7] N/A	BR[6] N/A	BR[5] N/A	BR[4] N/A	BR[3] N/A	BR[2] N/A	BR[1] N/A	BR[0] N/A

Toggle fields

BR[0]

Bit 0: Port x reset pin 0.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[1]

Bit 1: Port x reset pin 1.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[2]

Bit 2: Port x reset pin 2.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[3]

Bit 3: Port x reset pin 3.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[4]

Bit 4: Port x reset pin 4.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[5]

Bit 5: Port x reset pin 5.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[6]

Bit 6: Port x reset pin 6.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[7]

Bit 7: Port x reset pin 7.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[8]

Bit 8: Port x reset pin 8.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[9]

Bit 9: Port x reset pin 9.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[10]

Bit 10: Port x reset pin 10.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[11]

Bit 11: Port x reset pin 11.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[12]

Bit 12: Port x reset pin 12.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[13]

Bit 13: Port x reset pin 13.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[14]

Bit 14: Port x reset pin 14.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[15]

Bit 15: Port x reset pin 15.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

GPIOD

0x48000c00: General-purpose I/Os

177/177 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	MODER	MODER[15]		MODER[14]		MODER[13]		MODER[12]		MODER[11]		MODER[10]		MODER[9]		MODER[8]		MODER[7]		MODER[6]		MODER[5]		MODER[4]		MODER[3]		MODER[2]		MODER[1]		MODER[0]
0x4	OTYPER																	OT[15]	OT[14]	OT[13]	OT[12]	OT[11]	OT[10]	OT[9]	OT[8]	OT[7]	OT[6]	OT[5]	OT[4]	OT[3]	OT[2]	OT[1]	OT[0]
0x8	OSPEEDR	OSPEEDR[15]		OSPEEDR[14]		OSPEEDR[13]		OSPEEDR[12]		OSPEEDR[11]		OSPEEDR[10]		OSPEEDR[9]		OSPEEDR[8]		OSPEEDR[7]		OSPEEDR[6]		OSPEEDR[5]		OSPEEDR[4]		OSPEEDR[3]		OSPEEDR[2]		OSPEEDR[1]		OSPEEDR[0]
0xc	PUPDR	PUPDR[15]		PUPDR[14]		PUPDR[13]		PUPDR[12]		PUPDR[11]		PUPDR[10]		PUPDR[9]		PUPDR[8]		PUPDR[7]		PUPDR[6]		PUPDR[5]		PUPDR[4]		PUPDR[3]		PUPDR[2]		PUPDR[1]		PUPDR[0]
0x10	IDR																	IDR[15]	IDR[14]	IDR[13]	IDR[12]	IDR[11]	IDR[10]	IDR[9]	IDR[8]	IDR[7]	IDR[6]	IDR[5]	IDR[4]	IDR[3]	IDR[2]	IDR[1]	IDR[0]
0x14	ODR																	ODR[15]	ODR[14]	ODR[13]	ODR[12]	ODR[11]	ODR[10]	ODR[9]	ODR[8]	ODR[7]	ODR[6]	ODR[5]	ODR[4]	ODR[3]	ODR[2]	ODR[1]	ODR[0]
0x18	BSRR	BR[15]	BR[14]	BR[13]	BR[12]	BR[11]	BR[10]	BR[9]	BR[8]	BR[7]	BR[6]	BR[5]	BR[4]	BR[3]	BR[2]	BR[1]	BR[0]	BS[15]	BS[14]	BS[13]	BS[12]	BS[11]	BS[10]	BS[9]	BS[8]	BS[7]	BS[6]	BS[5]	BS[4]	BS[3]	BS[2]	BS[1]	BS[0]
0x1c	LCKR																LCKK	LCK[15]	LCK[14]	LCK[13]	LCK[12]	LCK[11]	LCK[10]	LCK[9]	LCK[8]	LCK[7]	LCK[6]	LCK[5]	LCK[4]	LCK[3]	LCK[2]	LCK[1]	LCK[0]
0x20	AFRL	AFR[L7]				AFR[L6]				AFR[L5]				AFR[L4]				AFR[L3]				AFR[L2]				AFR[L1]				AFR[L0]
0x24	AFRH	AFR[H15]				AFR[H14]				AFR[H13]				AFR[H12]				AFR[H11]				AFR[H10]				AFR[H9]				AFR[H8]
0x28	BRR																	BR[15]	BR[14]	BR[13]	BR[12]	BR[11]	BR[10]	BR[9]	BR[8]	BR[7]	BR[6]	BR[5]	BR[4]	BR[3]	BR[2]	BR[1]	BR[0]

Toggle registers

MODER

GPIO port mode register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MODER[15] rw		MODER[14] rw		MODER[13] rw		MODER[12] rw		MODER[11] rw		MODER[10] rw		MODER[9] rw		MODER[8] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MODER[7] rw		MODER[6] rw		MODER[5] rw		MODER[4] rw		MODER[3] rw		MODER[2] rw		MODER[1] rw		MODER[0] rw

Toggle fields

MODER[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OT[15] rw	OT[14] rw	OT[13] rw	OT[12] rw	OT[11] rw	OT[10] rw	OT[9] rw	OT[8] rw	OT[7] rw	OT[6] rw	OT[5] rw	OT[4] rw	OT[3] rw	OT[2] rw	OT[1] rw	OT[0] rw

Toggle fields

OT[0]

Bit 0: Port x configuration pin 0.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[1]

Bit 1: Port x configuration pin 1.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[2]

Bit 2: Port x configuration pin 2.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[3]

Bit 3: Port x configuration pin 3.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[4]

Bit 4: Port x configuration pin 4.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[5]

Bit 5: Port x configuration pin 5.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[6]

Bit 6: Port x configuration pin 6.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[7]

Bit 7: Port x configuration pin 7.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[8]

Bit 8: Port x configuration pin 8.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[9]

Bit 9: Port x configuration pin 9.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[10]

Bit 10: Port x configuration pin 10.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[11]

Bit 11: Port x configuration pin 11.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[12]

Bit 12: Port x configuration pin 12.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[13]

Bit 13: Port x configuration pin 13.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[14]

Bit 14: Port x configuration pin 14.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[15]

Bit 15: Port x configuration pin 15.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
OSPEEDR[15] rw		OSPEEDR[14] rw		OSPEEDR[13] rw		OSPEEDR[12] rw		OSPEEDR[11] rw		OSPEEDR[10] rw		OSPEEDR[9] rw		OSPEEDR[8] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OSPEEDR[7] rw		OSPEEDR[6] rw		OSPEEDR[5] rw		OSPEEDR[4] rw		OSPEEDR[3] rw		OSPEEDR[2] rw		OSPEEDR[1] rw		OSPEEDR[0] rw

Toggle fields

OSPEEDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PUPDR[15] rw		PUPDR[14] rw		PUPDR[13] rw		PUPDR[12] rw		PUPDR[11] rw		PUPDR[10] rw		PUPDR[9] rw		PUPDR[8] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PUPDR[7] rw		PUPDR[6] rw		PUPDR[5] rw		PUPDR[4] rw		PUPDR[3] rw		PUPDR[2] rw		PUPDR[1] rw		PUPDR[0] rw

Toggle fields

PUPDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-only

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IDR[15] r	IDR[14] r	IDR[13] r	IDR[12] r	IDR[11] r	IDR[10] r	IDR[9] r	IDR[8] r	IDR[7] r	IDR[6] r	IDR[5] r	IDR[4] r	IDR[3] r	IDR[2] r	IDR[1] r	IDR[0] r

Toggle fields

IDR[0]

Bit 0: Port input data pin 0.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[1]

Bit 1: Port input data pin 1.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[2]

Bit 2: Port input data pin 2.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[3]

Bit 3: Port input data pin 3.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[4]

Bit 4: Port input data pin 4.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[5]

Bit 5: Port input data pin 5.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[6]

Bit 6: Port input data pin 6.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[7]

Bit 7: Port input data pin 7.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[8]

Bit 8: Port input data pin 8.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[9]

Bit 9: Port input data pin 9.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[10]

Bit 10: Port input data pin 10.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[11]

Bit 11: Port input data pin 11.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[12]

Bit 12: Port input data pin 12.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[13]

Bit 13: Port input data pin 13.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[14]

Bit 14: Port input data pin 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[15]

Bit 15: Port input data pin 15.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ODR

GPIO port output data register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ODR[15] rw	ODR[14] rw	ODR[13] rw	ODR[12] rw	ODR[11] rw	ODR[10] rw	ODR[9] rw	ODR[8] rw	ODR[7] rw	ODR[6] rw	ODR[5] rw	ODR[4] rw	ODR[3] rw	ODR[2] rw	ODR[1] rw	ODR[0] rw

Toggle fields

ODR[0]

Bit 0: Port output data pin 0.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[1]

Bit 1: Port output data pin 1.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[2]

Bit 2: Port output data pin 2.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[3]

Bit 3: Port output data pin 3.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[4]

Bit 4: Port output data pin 4.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[5]

Bit 5: Port output data pin 5.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[6]

Bit 6: Port output data pin 6.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[7]

Bit 7: Port output data pin 7.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[8]

Bit 8: Port output data pin 8.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[9]

Bit 9: Port output data pin 9.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[10]

Bit 10: Port output data pin 10.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[11]

Bit 11: Port output data pin 11.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[12]

Bit 12: Port output data pin 12.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[13]

Bit 13: Port output data pin 13.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[14]

Bit 14: Port output data pin 14.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[15]

Bit 15: Port output data pin 15.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

BSRR

GPIO port bit set/reset register

Offset: 0x18, size: 32, reset: 0x00000000, access: write-only

32/32 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BR[15] w	BR[14] w	BR[13] w	BR[12] w	BR[11] w	BR[10] w	BR[9] w	BR[8] w	BR[7] w	BR[6] w	BR[5] w	BR[4] w	BR[3] w	BR[2] w	BR[1] w	BR[0] w
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BS[15] w	BS[14] w	BS[13] w	BS[12] w	BS[11] w	BS[10] w	BS[9] w	BS[8] w	BS[7] w	BS[6] w	BS[5] w	BS[4] w	BS[3] w	BS[2] w	BS[1] w	BS[0] w

Toggle fields

BS[0]

Bit 0: Port x set pin 0.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[1]

Bit 1: Port x set pin 1.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[2]

Bit 2: Port x set pin 2.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[3]

Bit 3: Port x set pin 3.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[4]

Bit 4: Port x set pin 4.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[5]

Bit 5: Port x set pin 5.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[6]

Bit 6: Port x set pin 6.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[7]

Bit 7: Port x set pin 7.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[8]

Bit 8: Port x set pin 8.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[9]

Bit 9: Port x set pin 9.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[10]

Bit 10: Port x set pin 10.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[11]

Bit 11: Port x set pin 11.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[12]

Bit 12: Port x set pin 12.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[13]

Bit 13: Port x set pin 13.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[14]

Bit 14: Port x set pin 14.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[15]

Bit 15: Port x set pin 15.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BR[0]

Bit 16: Port x reset pin 0.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[1]

Bit 17: Port x reset pin 1.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[2]

Bit 18: Port x reset pin 2.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[3]

Bit 19: Port x reset pin 3.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[4]

Bit 20: Port x reset pin 4.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[5]

Bit 21: Port x reset pin 5.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[6]

Bit 22: Port x reset pin 6.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[7]

Bit 23: Port x reset pin 7.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[8]

Bit 24: Port x reset pin 8.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[9]

Bit 25: Port x reset pin 9.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[10]

Bit 26: Port x reset pin 10.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[11]

Bit 27: Port x reset pin 11.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[12]

Bit 28: Port x reset pin 12.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[13]

Bit 29: Port x reset pin 13.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[14]

Bit 30: Port x reset pin 14.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[15]

Bit 31: Port x reset pin 15.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

LCKR

GPIO port configuration lock register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

17/17 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
															LCKK rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
LCK[15] rw	LCK[14] rw	LCK[13] rw	LCK[12] rw	LCK[11] rw	LCK[10] rw	LCK[9] rw	LCK[8] rw	LCK[7] rw	LCK[6] rw	LCK[5] rw	LCK[4] rw	LCK[3] rw	LCK[2] rw	LCK[1] rw	LCK[0] rw

Toggle fields

LCK[0]

Bit 0: Port x lock pin 0.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[1]

Bit 1: Port x lock pin 1.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[2]

Bit 2: Port x lock pin 2.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[3]

Bit 3: Port x lock pin 3.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[4]

Bit 4: Port x lock pin 4.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[5]

Bit 5: Port x lock pin 5.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[6]

Bit 6: Port x lock pin 6.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[7]

Bit 7: Port x lock pin 7.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[8]

Bit 8: Port x lock pin 8.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[9]

Bit 9: Port x lock pin 9.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[10]

Bit 10: Port x lock pin 10.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[11]

Bit 11: Port x lock pin 11.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[12]

Bit 12: Port x lock pin 12.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[13]

Bit 13: Port x lock pin 13.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[14]

Bit 14: Port x lock pin 14.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[15]

Bit 15: Port x lock pin 15.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AFR[L7] rw				AFR[L6] rw				AFR[L5] rw				AFR[L4] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AFR[L3] rw				AFR[L2] rw				AFR[L1] rw				AFR[L0] rw

Toggle fields

AFR[L0]

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L1]

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L2]

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L3]

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L4]

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L5]

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L6]

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L7]

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH

GPIO alternate function high register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AFR[H15] rw				AFR[H14] rw				AFR[H13] rw				AFR[H12] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AFR[H11] rw				AFR[H10] rw				AFR[H9] rw				AFR[H8] rw

Toggle fields

AFR[H8]

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H9]

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H10]

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H11]

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H12]

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H13]

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H14]

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H15]

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

BRR

GPIO port bit reset register

Offset: 0x28, size: 32, reset: 0x00000000, access: Unspecified

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BR[15] N/A	BR[14] N/A	BR[13] N/A	BR[12] N/A	BR[11] N/A	BR[10] N/A	BR[9] N/A	BR[8] N/A	BR[7] N/A	BR[6] N/A	BR[5] N/A	BR[4] N/A	BR[3] N/A	BR[2] N/A	BR[1] N/A	BR[0] N/A

Toggle fields

BR[0]

Bit 0: Port x reset pin 0.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[1]

Bit 1: Port x reset pin 1.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[2]

Bit 2: Port x reset pin 2.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[3]

Bit 3: Port x reset pin 3.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[4]

Bit 4: Port x reset pin 4.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[5]

Bit 5: Port x reset pin 5.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[6]

Bit 6: Port x reset pin 6.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[7]

Bit 7: Port x reset pin 7.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[8]

Bit 8: Port x reset pin 8.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[9]

Bit 9: Port x reset pin 9.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[10]

Bit 10: Port x reset pin 10.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[11]

Bit 11: Port x reset pin 11.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[12]

Bit 12: Port x reset pin 12.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[13]

Bit 13: Port x reset pin 13.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[14]

Bit 14: Port x reset pin 14.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[15]

Bit 15: Port x reset pin 15.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

GPIOE

0x48001000: General-purpose I/Os

177/177 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	MODER	MODER[15]		MODER[14]		MODER[13]		MODER[12]		MODER[11]		MODER[10]		MODER[9]		MODER[8]		MODER[7]		MODER[6]		MODER[5]		MODER[4]		MODER[3]		MODER[2]		MODER[1]		MODER[0]
0x4	OTYPER																	OT[15]	OT[14]	OT[13]	OT[12]	OT[11]	OT[10]	OT[9]	OT[8]	OT[7]	OT[6]	OT[5]	OT[4]	OT[3]	OT[2]	OT[1]	OT[0]
0x8	OSPEEDR	OSPEEDR[15]		OSPEEDR[14]		OSPEEDR[13]		OSPEEDR[12]		OSPEEDR[11]		OSPEEDR[10]		OSPEEDR[9]		OSPEEDR[8]		OSPEEDR[7]		OSPEEDR[6]		OSPEEDR[5]		OSPEEDR[4]		OSPEEDR[3]		OSPEEDR[2]		OSPEEDR[1]		OSPEEDR[0]
0xc	PUPDR	PUPDR[15]		PUPDR[14]		PUPDR[13]		PUPDR[12]		PUPDR[11]		PUPDR[10]		PUPDR[9]		PUPDR[8]		PUPDR[7]		PUPDR[6]		PUPDR[5]		PUPDR[4]		PUPDR[3]		PUPDR[2]		PUPDR[1]		PUPDR[0]
0x10	IDR																	IDR[15]	IDR[14]	IDR[13]	IDR[12]	IDR[11]	IDR[10]	IDR[9]	IDR[8]	IDR[7]	IDR[6]	IDR[5]	IDR[4]	IDR[3]	IDR[2]	IDR[1]	IDR[0]
0x14	ODR																	ODR[15]	ODR[14]	ODR[13]	ODR[12]	ODR[11]	ODR[10]	ODR[9]	ODR[8]	ODR[7]	ODR[6]	ODR[5]	ODR[4]	ODR[3]	ODR[2]	ODR[1]	ODR[0]
0x18	BSRR	BR[15]	BR[14]	BR[13]	BR[12]	BR[11]	BR[10]	BR[9]	BR[8]	BR[7]	BR[6]	BR[5]	BR[4]	BR[3]	BR[2]	BR[1]	BR[0]	BS[15]	BS[14]	BS[13]	BS[12]	BS[11]	BS[10]	BS[9]	BS[8]	BS[7]	BS[6]	BS[5]	BS[4]	BS[3]	BS[2]	BS[1]	BS[0]
0x1c	LCKR																LCKK	LCK[15]	LCK[14]	LCK[13]	LCK[12]	LCK[11]	LCK[10]	LCK[9]	LCK[8]	LCK[7]	LCK[6]	LCK[5]	LCK[4]	LCK[3]	LCK[2]	LCK[1]	LCK[0]
0x20	AFRL	AFR[L7]				AFR[L6]				AFR[L5]				AFR[L4]				AFR[L3]				AFR[L2]				AFR[L1]				AFR[L0]
0x24	AFRH	AFR[H15]				AFR[H14]				AFR[H13]				AFR[H12]				AFR[H11]				AFR[H10]				AFR[H9]				AFR[H8]
0x28	BRR																	BR[15]	BR[14]	BR[13]	BR[12]	BR[11]	BR[10]	BR[9]	BR[8]	BR[7]	BR[6]	BR[5]	BR[4]	BR[3]	BR[2]	BR[1]	BR[0]

Toggle registers

MODER

GPIO port mode register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MODER[15] rw		MODER[14] rw		MODER[13] rw		MODER[12] rw		MODER[11] rw		MODER[10] rw		MODER[9] rw		MODER[8] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MODER[7] rw		MODER[6] rw		MODER[5] rw		MODER[4] rw		MODER[3] rw		MODER[2] rw		MODER[1] rw		MODER[0] rw

Toggle fields

MODER[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OT[15] rw	OT[14] rw	OT[13] rw	OT[12] rw	OT[11] rw	OT[10] rw	OT[9] rw	OT[8] rw	OT[7] rw	OT[6] rw	OT[5] rw	OT[4] rw	OT[3] rw	OT[2] rw	OT[1] rw	OT[0] rw

Toggle fields

OT[0]

Bit 0: Port x configuration pin 0.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[1]

Bit 1: Port x configuration pin 1.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[2]

Bit 2: Port x configuration pin 2.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[3]

Bit 3: Port x configuration pin 3.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[4]

Bit 4: Port x configuration pin 4.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[5]

Bit 5: Port x configuration pin 5.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[6]

Bit 6: Port x configuration pin 6.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[7]

Bit 7: Port x configuration pin 7.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[8]

Bit 8: Port x configuration pin 8.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[9]

Bit 9: Port x configuration pin 9.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[10]

Bit 10: Port x configuration pin 10.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[11]

Bit 11: Port x configuration pin 11.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[12]

Bit 12: Port x configuration pin 12.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[13]

Bit 13: Port x configuration pin 13.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[14]

Bit 14: Port x configuration pin 14.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[15]

Bit 15: Port x configuration pin 15.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
OSPEEDR[15] rw		OSPEEDR[14] rw		OSPEEDR[13] rw		OSPEEDR[12] rw		OSPEEDR[11] rw		OSPEEDR[10] rw		OSPEEDR[9] rw		OSPEEDR[8] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OSPEEDR[7] rw		OSPEEDR[6] rw		OSPEEDR[5] rw		OSPEEDR[4] rw		OSPEEDR[3] rw		OSPEEDR[2] rw		OSPEEDR[1] rw		OSPEEDR[0] rw

Toggle fields

OSPEEDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PUPDR[15] rw		PUPDR[14] rw		PUPDR[13] rw		PUPDR[12] rw		PUPDR[11] rw		PUPDR[10] rw		PUPDR[9] rw		PUPDR[8] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PUPDR[7] rw		PUPDR[6] rw		PUPDR[5] rw		PUPDR[4] rw		PUPDR[3] rw		PUPDR[2] rw		PUPDR[1] rw		PUPDR[0] rw

Toggle fields

PUPDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-only

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IDR[15] r	IDR[14] r	IDR[13] r	IDR[12] r	IDR[11] r	IDR[10] r	IDR[9] r	IDR[8] r	IDR[7] r	IDR[6] r	IDR[5] r	IDR[4] r	IDR[3] r	IDR[2] r	IDR[1] r	IDR[0] r

Toggle fields

IDR[0]

Bit 0: Port input data pin 0.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[1]

Bit 1: Port input data pin 1.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[2]

Bit 2: Port input data pin 2.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[3]

Bit 3: Port input data pin 3.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[4]

Bit 4: Port input data pin 4.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[5]

Bit 5: Port input data pin 5.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[6]

Bit 6: Port input data pin 6.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[7]

Bit 7: Port input data pin 7.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[8]

Bit 8: Port input data pin 8.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[9]

Bit 9: Port input data pin 9.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[10]

Bit 10: Port input data pin 10.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[11]

Bit 11: Port input data pin 11.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[12]

Bit 12: Port input data pin 12.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[13]

Bit 13: Port input data pin 13.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[14]

Bit 14: Port input data pin 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[15]

Bit 15: Port input data pin 15.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ODR

GPIO port output data register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ODR[15] rw	ODR[14] rw	ODR[13] rw	ODR[12] rw	ODR[11] rw	ODR[10] rw	ODR[9] rw	ODR[8] rw	ODR[7] rw	ODR[6] rw	ODR[5] rw	ODR[4] rw	ODR[3] rw	ODR[2] rw	ODR[1] rw	ODR[0] rw

Toggle fields

ODR[0]

Bit 0: Port output data pin 0.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[1]

Bit 1: Port output data pin 1.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[2]

Bit 2: Port output data pin 2.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[3]

Bit 3: Port output data pin 3.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[4]

Bit 4: Port output data pin 4.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[5]

Bit 5: Port output data pin 5.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[6]

Bit 6: Port output data pin 6.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[7]

Bit 7: Port output data pin 7.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[8]

Bit 8: Port output data pin 8.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[9]

Bit 9: Port output data pin 9.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[10]

Bit 10: Port output data pin 10.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[11]

Bit 11: Port output data pin 11.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[12]

Bit 12: Port output data pin 12.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[13]

Bit 13: Port output data pin 13.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[14]

Bit 14: Port output data pin 14.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[15]

Bit 15: Port output data pin 15.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

BSRR

GPIO port bit set/reset register

Offset: 0x18, size: 32, reset: 0x00000000, access: write-only

32/32 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BR[15] w	BR[14] w	BR[13] w	BR[12] w	BR[11] w	BR[10] w	BR[9] w	BR[8] w	BR[7] w	BR[6] w	BR[5] w	BR[4] w	BR[3] w	BR[2] w	BR[1] w	BR[0] w
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BS[15] w	BS[14] w	BS[13] w	BS[12] w	BS[11] w	BS[10] w	BS[9] w	BS[8] w	BS[7] w	BS[6] w	BS[5] w	BS[4] w	BS[3] w	BS[2] w	BS[1] w	BS[0] w

Toggle fields

BS[0]

Bit 0: Port x set pin 0.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[1]

Bit 1: Port x set pin 1.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[2]

Bit 2: Port x set pin 2.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[3]

Bit 3: Port x set pin 3.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[4]

Bit 4: Port x set pin 4.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[5]

Bit 5: Port x set pin 5.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[6]

Bit 6: Port x set pin 6.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[7]

Bit 7: Port x set pin 7.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[8]

Bit 8: Port x set pin 8.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[9]

Bit 9: Port x set pin 9.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[10]

Bit 10: Port x set pin 10.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[11]

Bit 11: Port x set pin 11.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[12]

Bit 12: Port x set pin 12.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[13]

Bit 13: Port x set pin 13.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[14]

Bit 14: Port x set pin 14.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[15]

Bit 15: Port x set pin 15.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BR[0]

Bit 16: Port x reset pin 0.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[1]

Bit 17: Port x reset pin 1.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[2]

Bit 18: Port x reset pin 2.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[3]

Bit 19: Port x reset pin 3.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[4]

Bit 20: Port x reset pin 4.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[5]

Bit 21: Port x reset pin 5.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[6]

Bit 22: Port x reset pin 6.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[7]

Bit 23: Port x reset pin 7.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[8]

Bit 24: Port x reset pin 8.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[9]

Bit 25: Port x reset pin 9.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[10]

Bit 26: Port x reset pin 10.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[11]

Bit 27: Port x reset pin 11.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[12]

Bit 28: Port x reset pin 12.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[13]

Bit 29: Port x reset pin 13.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[14]

Bit 30: Port x reset pin 14.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[15]

Bit 31: Port x reset pin 15.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

LCKR

GPIO port configuration lock register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

17/17 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
															LCKK rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
LCK[15] rw	LCK[14] rw	LCK[13] rw	LCK[12] rw	LCK[11] rw	LCK[10] rw	LCK[9] rw	LCK[8] rw	LCK[7] rw	LCK[6] rw	LCK[5] rw	LCK[4] rw	LCK[3] rw	LCK[2] rw	LCK[1] rw	LCK[0] rw

Toggle fields

LCK[0]

Bit 0: Port x lock pin 0.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[1]

Bit 1: Port x lock pin 1.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[2]

Bit 2: Port x lock pin 2.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[3]

Bit 3: Port x lock pin 3.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[4]

Bit 4: Port x lock pin 4.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[5]

Bit 5: Port x lock pin 5.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[6]

Bit 6: Port x lock pin 6.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[7]

Bit 7: Port x lock pin 7.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[8]

Bit 8: Port x lock pin 8.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[9]

Bit 9: Port x lock pin 9.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[10]

Bit 10: Port x lock pin 10.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[11]

Bit 11: Port x lock pin 11.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[12]

Bit 12: Port x lock pin 12.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[13]

Bit 13: Port x lock pin 13.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[14]

Bit 14: Port x lock pin 14.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[15]

Bit 15: Port x lock pin 15.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AFR[L7] rw				AFR[L6] rw				AFR[L5] rw				AFR[L4] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AFR[L3] rw				AFR[L2] rw				AFR[L1] rw				AFR[L0] rw

Toggle fields

AFR[L0]

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L1]

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L2]

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L3]

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L4]

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L5]

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L6]

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L7]

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH

GPIO alternate function high register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AFR[H15] rw				AFR[H14] rw				AFR[H13] rw				AFR[H12] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AFR[H11] rw				AFR[H10] rw				AFR[H9] rw				AFR[H8] rw

Toggle fields

AFR[H8]

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H9]

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H10]

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H11]

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H12]

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H13]

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H14]

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H15]

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

BRR

GPIO port bit reset register

Offset: 0x28, size: 32, reset: 0x00000000, access: Unspecified

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BR[15] N/A	BR[14] N/A	BR[13] N/A	BR[12] N/A	BR[11] N/A	BR[10] N/A	BR[9] N/A	BR[8] N/A	BR[7] N/A	BR[6] N/A	BR[5] N/A	BR[4] N/A	BR[3] N/A	BR[2] N/A	BR[1] N/A	BR[0] N/A

Toggle fields

BR[0]

Bit 0: Port x reset pin 0.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[1]

Bit 1: Port x reset pin 1.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[2]

Bit 2: Port x reset pin 2.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[3]

Bit 3: Port x reset pin 3.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[4]

Bit 4: Port x reset pin 4.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[5]

Bit 5: Port x reset pin 5.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[6]

Bit 6: Port x reset pin 6.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[7]

Bit 7: Port x reset pin 7.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[8]

Bit 8: Port x reset pin 8.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[9]

Bit 9: Port x reset pin 9.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[10]

Bit 10: Port x reset pin 10.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[11]

Bit 11: Port x reset pin 11.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[12]

Bit 12: Port x reset pin 12.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[13]

Bit 13: Port x reset pin 13.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[14]

Bit 14: Port x reset pin 14.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[15]

Bit 15: Port x reset pin 15.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

GPIOH

0x48001c00: General-purpose I/Os

177/177 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	MODER	MODER[15]		MODER[14]		MODER[13]		MODER[12]		MODER[11]		MODER[10]		MODER[9]		MODER[8]		MODER[7]		MODER[6]		MODER[5]		MODER[4]		MODER[3]		MODER[2]		MODER[1]		MODER[0]
0x4	OTYPER																	OT[15]	OT[14]	OT[13]	OT[12]	OT[11]	OT[10]	OT[9]	OT[8]	OT[7]	OT[6]	OT[5]	OT[4]	OT[3]	OT[2]	OT[1]	OT[0]
0x8	OSPEEDR	OSPEEDR[15]		OSPEEDR[14]		OSPEEDR[13]		OSPEEDR[12]		OSPEEDR[11]		OSPEEDR[10]		OSPEEDR[9]		OSPEEDR[8]		OSPEEDR[7]		OSPEEDR[6]		OSPEEDR[5]		OSPEEDR[4]		OSPEEDR[3]		OSPEEDR[2]		OSPEEDR[1]		OSPEEDR[0]
0xc	PUPDR	PUPDR[15]		PUPDR[14]		PUPDR[13]		PUPDR[12]		PUPDR[11]		PUPDR[10]		PUPDR[9]		PUPDR[8]		PUPDR[7]		PUPDR[6]		PUPDR[5]		PUPDR[4]		PUPDR[3]		PUPDR[2]		PUPDR[1]		PUPDR[0]
0x10	IDR																	IDR[15]	IDR[14]	IDR[13]	IDR[12]	IDR[11]	IDR[10]	IDR[9]	IDR[8]	IDR[7]	IDR[6]	IDR[5]	IDR[4]	IDR[3]	IDR[2]	IDR[1]	IDR[0]
0x14	ODR																	ODR[15]	ODR[14]	ODR[13]	ODR[12]	ODR[11]	ODR[10]	ODR[9]	ODR[8]	ODR[7]	ODR[6]	ODR[5]	ODR[4]	ODR[3]	ODR[2]	ODR[1]	ODR[0]
0x18	BSRR	BR[15]	BR[14]	BR[13]	BR[12]	BR[11]	BR[10]	BR[9]	BR[8]	BR[7]	BR[6]	BR[5]	BR[4]	BR[3]	BR[2]	BR[1]	BR[0]	BS[15]	BS[14]	BS[13]	BS[12]	BS[11]	BS[10]	BS[9]	BS[8]	BS[7]	BS[6]	BS[5]	BS[4]	BS[3]	BS[2]	BS[1]	BS[0]
0x1c	LCKR																LCKK	LCK[15]	LCK[14]	LCK[13]	LCK[12]	LCK[11]	LCK[10]	LCK[9]	LCK[8]	LCK[7]	LCK[6]	LCK[5]	LCK[4]	LCK[3]	LCK[2]	LCK[1]	LCK[0]
0x20	AFRL	AFR[L7]				AFR[L6]				AFR[L5]				AFR[L4]				AFR[L3]				AFR[L2]				AFR[L1]				AFR[L0]
0x24	AFRH	AFR[H15]				AFR[H14]				AFR[H13]				AFR[H12]				AFR[H11]				AFR[H10]				AFR[H9]				AFR[H8]
0x28	BRR																	BR[15]	BR[14]	BR[13]	BR[12]	BR[11]	BR[10]	BR[9]	BR[8]	BR[7]	BR[6]	BR[5]	BR[4]	BR[3]	BR[2]	BR[1]	BR[0]

Toggle registers

MODER

GPIO port mode register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MODER[15] rw		MODER[14] rw		MODER[13] rw		MODER[12] rw		MODER[11] rw		MODER[10] rw		MODER[9] rw		MODER[8] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MODER[7] rw		MODER[6] rw		MODER[5] rw		MODER[4] rw		MODER[3] rw		MODER[2] rw		MODER[1] rw		MODER[0] rw

Toggle fields

MODER[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

MODER[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OTYPER

GPIO port output type register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OT[15] rw	OT[14] rw	OT[13] rw	OT[12] rw	OT[11] rw	OT[10] rw	OT[9] rw	OT[8] rw	OT[7] rw	OT[6] rw	OT[5] rw	OT[4] rw	OT[3] rw	OT[2] rw	OT[1] rw	OT[0] rw

Toggle fields

OT[0]

Bit 0: Port x configuration pin 0.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[1]

Bit 1: Port x configuration pin 1.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[2]

Bit 2: Port x configuration pin 2.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[3]

Bit 3: Port x configuration pin 3.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[4]

Bit 4: Port x configuration pin 4.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[5]

Bit 5: Port x configuration pin 5.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[6]

Bit 6: Port x configuration pin 6.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[7]

Bit 7: Port x configuration pin 7.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[8]

Bit 8: Port x configuration pin 8.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[9]

Bit 9: Port x configuration pin 9.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[10]

Bit 10: Port x configuration pin 10.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[11]

Bit 11: Port x configuration pin 11.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[12]

Bit 12: Port x configuration pin 12.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[13]

Bit 13: Port x configuration pin 13.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[14]

Bit 14: Port x configuration pin 14.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OT[15]

Bit 15: Port x configuration pin 15.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPEEDR

GPIO port output speed register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
OSPEEDR[15] rw		OSPEEDR[14] rw		OSPEEDR[13] rw		OSPEEDR[12] rw		OSPEEDR[11] rw		OSPEEDR[10] rw		OSPEEDR[9] rw		OSPEEDR[8] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OSPEEDR[7] rw		OSPEEDR[6] rw		OSPEEDR[5] rw		OSPEEDR[4] rw		OSPEEDR[3] rw		OSPEEDR[2] rw		OSPEEDR[1] rw		OSPEEDR[0] rw

Toggle fields

OSPEEDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

OSPEEDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: LowSpeed: Low speed
1: MediumSpeed: Medium speed
2: HighSpeed: High speed
3: VeryHighSpeed: Very high speed

PUPDR

GPIO port pull-up/pull-down register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PUPDR[15] rw		PUPDR[14] rw		PUPDR[13] rw		PUPDR[12] rw		PUPDR[11] rw		PUPDR[10] rw		PUPDR[9] rw		PUPDR[8] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PUPDR[7] rw		PUPDR[6] rw		PUPDR[5] rw		PUPDR[4] rw		PUPDR[3] rw		PUPDR[2] rw		PUPDR[1] rw		PUPDR[0] rw

Toggle fields

PUPDR[0]

Bits 0-1: Port x configuration pin 0.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[1]

Bits 2-3: Port x configuration pin 1.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[2]

Bits 4-5: Port x configuration pin 2.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[3]

Bits 6-7: Port x configuration pin 3.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[4]

Bits 8-9: Port x configuration pin 4.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[5]

Bits 10-11: Port x configuration pin 5.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[6]

Bits 12-13: Port x configuration pin 6.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[7]

Bits 14-15: Port x configuration pin 7.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[8]

Bits 16-17: Port x configuration pin 8.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[9]

Bits 18-19: Port x configuration pin 9.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[10]

Bits 20-21: Port x configuration pin 10.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[11]

Bits 22-23: Port x configuration pin 11.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[12]

Bits 24-25: Port x configuration pin 12.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[13]

Bits 26-27: Port x configuration pin 13.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[14]

Bits 28-29: Port x configuration pin 14.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

PUPDR[15]

Bits 30-31: Port x configuration pin 15.

Allowed values:
0: Floating: No pull-up, pull-down
1: PullUp: Pull-up
2: PullDown: Pull-down

IDR

GPIO port input data register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-only

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IDR[15] r	IDR[14] r	IDR[13] r	IDR[12] r	IDR[11] r	IDR[10] r	IDR[9] r	IDR[8] r	IDR[7] r	IDR[6] r	IDR[5] r	IDR[4] r	IDR[3] r	IDR[2] r	IDR[1] r	IDR[0] r

Toggle fields

IDR[0]

Bit 0: Port input data pin 0.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[1]

Bit 1: Port input data pin 1.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[2]

Bit 2: Port input data pin 2.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[3]

Bit 3: Port input data pin 3.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[4]

Bit 4: Port input data pin 4.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[5]

Bit 5: Port input data pin 5.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[6]

Bit 6: Port input data pin 6.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[7]

Bit 7: Port input data pin 7.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[8]

Bit 8: Port input data pin 8.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[9]

Bit 9: Port input data pin 9.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[10]

Bit 10: Port input data pin 10.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[11]

Bit 11: Port input data pin 11.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[12]

Bit 12: Port input data pin 12.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[13]

Bit 13: Port input data pin 13.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[14]

Bit 14: Port input data pin 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

IDR[15]

Bit 15: Port input data pin 15.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ODR

GPIO port output data register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ODR[15] rw	ODR[14] rw	ODR[13] rw	ODR[12] rw	ODR[11] rw	ODR[10] rw	ODR[9] rw	ODR[8] rw	ODR[7] rw	ODR[6] rw	ODR[5] rw	ODR[4] rw	ODR[3] rw	ODR[2] rw	ODR[1] rw	ODR[0] rw

Toggle fields

ODR[0]

Bit 0: Port output data pin 0.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[1]

Bit 1: Port output data pin 1.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[2]

Bit 2: Port output data pin 2.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[3]

Bit 3: Port output data pin 3.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[4]

Bit 4: Port output data pin 4.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[5]

Bit 5: Port output data pin 5.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[6]

Bit 6: Port output data pin 6.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[7]

Bit 7: Port output data pin 7.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[8]

Bit 8: Port output data pin 8.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[9]

Bit 9: Port output data pin 9.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[10]

Bit 10: Port output data pin 10.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[11]

Bit 11: Port output data pin 11.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[12]

Bit 12: Port output data pin 12.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[13]

Bit 13: Port output data pin 13.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[14]

Bit 14: Port output data pin 14.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

ODR[15]

Bit 15: Port output data pin 15.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

BSRR

GPIO port bit set/reset register

Offset: 0x18, size: 32, reset: 0x00000000, access: write-only

32/32 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BR[15] w	BR[14] w	BR[13] w	BR[12] w	BR[11] w	BR[10] w	BR[9] w	BR[8] w	BR[7] w	BR[6] w	BR[5] w	BR[4] w	BR[3] w	BR[2] w	BR[1] w	BR[0] w
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BS[15] w	BS[14] w	BS[13] w	BS[12] w	BS[11] w	BS[10] w	BS[9] w	BS[8] w	BS[7] w	BS[6] w	BS[5] w	BS[4] w	BS[3] w	BS[2] w	BS[1] w	BS[0] w

Toggle fields

BS[0]

Bit 0: Port x set pin 0.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[1]

Bit 1: Port x set pin 1.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[2]

Bit 2: Port x set pin 2.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[3]

Bit 3: Port x set pin 3.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[4]

Bit 4: Port x set pin 4.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[5]

Bit 5: Port x set pin 5.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[6]

Bit 6: Port x set pin 6.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[7]

Bit 7: Port x set pin 7.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[8]

Bit 8: Port x set pin 8.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[9]

Bit 9: Port x set pin 9.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[10]

Bit 10: Port x set pin 10.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[11]

Bit 11: Port x set pin 11.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[12]

Bit 12: Port x set pin 12.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[13]

Bit 13: Port x set pin 13.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[14]

Bit 14: Port x set pin 14.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BS[15]

Bit 15: Port x set pin 15.

Allowed values:
1: Set: Sets the corresponding ODRx bit

BR[0]

Bit 16: Port x reset pin 0.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[1]

Bit 17: Port x reset pin 1.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[2]

Bit 18: Port x reset pin 2.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[3]

Bit 19: Port x reset pin 3.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[4]

Bit 20: Port x reset pin 4.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[5]

Bit 21: Port x reset pin 5.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[6]

Bit 22: Port x reset pin 6.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[7]

Bit 23: Port x reset pin 7.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[8]

Bit 24: Port x reset pin 8.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[9]

Bit 25: Port x reset pin 9.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[10]

Bit 26: Port x reset pin 10.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[11]

Bit 27: Port x reset pin 11.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[12]

Bit 28: Port x reset pin 12.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[13]

Bit 29: Port x reset pin 13.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[14]

Bit 30: Port x reset pin 14.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

BR[15]

Bit 31: Port x reset pin 15.

Allowed values:
1: Reset: Resets the corresponding ODRx bit

LCKR

GPIO port configuration lock register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

17/17 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
															LCKK rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
LCK[15] rw	LCK[14] rw	LCK[13] rw	LCK[12] rw	LCK[11] rw	LCK[10] rw	LCK[9] rw	LCK[8] rw	LCK[7] rw	LCK[6] rw	LCK[5] rw	LCK[4] rw	LCK[3] rw	LCK[2] rw	LCK[1] rw	LCK[0] rw

Toggle fields

LCK[0]

Bit 0: Port x lock pin 0.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[1]

Bit 1: Port x lock pin 1.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[2]

Bit 2: Port x lock pin 2.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[3]

Bit 3: Port x lock pin 3.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[4]

Bit 4: Port x lock pin 4.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[5]

Bit 5: Port x lock pin 5.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[6]

Bit 6: Port x lock pin 6.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[7]

Bit 7: Port x lock pin 7.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[8]

Bit 8: Port x lock pin 8.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[9]

Bit 9: Port x lock pin 9.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[10]

Bit 10: Port x lock pin 10.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[11]

Bit 11: Port x lock pin 11.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[12]

Bit 12: Port x lock pin 12.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[13]

Bit 13: Port x lock pin 13.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[14]

Bit 14: Port x lock pin 14.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCK[15]

Bit 15: Port x lock pin 15.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LCKK

Bit 16: Port x lock bit y (y= 0..15).

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFRL

GPIO alternate function low register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AFR[L7] rw				AFR[L6] rw				AFR[L5] rw				AFR[L4] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AFR[L3] rw				AFR[L2] rw				AFR[L1] rw				AFR[L0] rw

Toggle fields

AFR[L0]

Bits 0-3: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L1]

Bits 4-7: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L2]

Bits 8-11: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L3]

Bits 12-15: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L4]

Bits 16-19: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L5]

Bits 20-23: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L6]

Bits 24-27: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[L7]

Bits 28-31: Alternate function selection for port x bit y (y = 0..7).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFRH

GPIO alternate function high register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
AFR[H15] rw				AFR[H14] rw				AFR[H13] rw				AFR[H12] rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
AFR[H11] rw				AFR[H10] rw				AFR[H9] rw				AFR[H8] rw

Toggle fields

AFR[H8]

Bits 0-3: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H9]

Bits 4-7: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H10]

Bits 8-11: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H11]

Bits 12-15: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H12]

Bits 16-19: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H13]

Bits 20-23: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H14]

Bits 24-27: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

AFR[H15]

Bits 28-31: Alternate function selection for port x bit y (y = 8..15).

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
8: AF8: AF8
9: AF9: AF9
10: AF10: AF10
11: AF11: AF11
12: AF12: AF12
13: AF13: AF13
14: AF14: AF14
15: AF15: AF15

BRR

GPIO port bit reset register

Offset: 0x28, size: 32, reset: 0x00000000, access: Unspecified

16/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BR[15] N/A	BR[14] N/A	BR[13] N/A	BR[12] N/A	BR[11] N/A	BR[10] N/A	BR[9] N/A	BR[8] N/A	BR[7] N/A	BR[6] N/A	BR[5] N/A	BR[4] N/A	BR[3] N/A	BR[2] N/A	BR[1] N/A	BR[0] N/A

Toggle fields

BR[0]

Bit 0: Port x reset pin 0.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[1]

Bit 1: Port x reset pin 1.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[2]

Bit 2: Port x reset pin 2.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[3]

Bit 3: Port x reset pin 3.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[4]

Bit 4: Port x reset pin 4.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[5]

Bit 5: Port x reset pin 5.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[6]

Bit 6: Port x reset pin 6.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[7]

Bit 7: Port x reset pin 7.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[8]

Bit 8: Port x reset pin 8.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[9]

Bit 9: Port x reset pin 9.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[10]

Bit 10: Port x reset pin 10.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[11]

Bit 11: Port x reset pin 11.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[12]

Bit 12: Port x reset pin 12.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[13]

Bit 13: Port x reset pin 13.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[14]

Bit 14: Port x reset pin 14.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

BR[15]

Bit 15: Port x reset pin 15.

Allowed values:
0: NoAction: No action on the corresponding ODx bit
1: Reset: Reset the corresponding ODx bit

I2C1

0x40005400: Inter-integrated circuit

76/76 fields covered.

Toggle register map

Offset	Name	31	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	CR1						PECEN	ALERTEN	SMBDEN	SMBHEN	GCEN	WUPEN	NOSTRETCH	SBC	RXDMAEN	TXDMAEN		ANFOFF	DNF				ERRIE	TCIE	STOPIE	NACKIE	ADDRIE	RXIE	TXIE	PE
0x4	CR2			PECBYTE	AUTOEND	RELOAD	NBYTES								NACK	STOP	START	HEAD10R	ADD10	RD_WRN	SADD
0x8	OAR1														OA1EN					OA1MODE	OA1
0xc	OAR2														OA2EN					OA2MSK			OA2
0x10	TIMINGR	PRESC					SCLDEL				SDADEL				SCLH								SCLL
0x14	TIMEOUTR	TEXTEN	TIMEOUTB												TIMOUTEN			TIDLE	TIMEOUTA
0x18	ISR						ADDCODE							DIR	BUSY		ALERT	TIMEOUT	PECERR	OVR	ARLO	BERR	TCR	TC	STOPF	NACKF	ADDR	RXNE	TXIS	TXE
0x1c	ICR																ALERTCF	TIMOUTCF	PECCF	OVRCF	ARLOCF	BERRCF			STOPCF	NACKCF	ADDRCF
0x20	PECR																						PEC
0x24	RXDR																						RXDATA
0x28	TXDR																						TXDATA

Toggle registers

CR1

Control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

20/20 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								PECEN rw	ALERTEN rw	SMBDEN rw	SMBHEN rw	GCEN rw	WUPEN rw	NOSTRETCH rw	SBC rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RXDMAEN rw	TXDMAEN rw		ANFOFF rw	DNF rw				ERRIE rw	TCIE rw	STOPIE rw	NACKIE rw	ADDRIE rw	RXIE rw	TXIE rw	PE rw

Toggle fields

PE

Bit 0: Peripheral enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

TXIE

Bit 1: TX Interrupt enable.

Allowed values:
0: Disabled: Transmit (TXIS) interrupt disabled
1: Enabled: Transmit (TXIS) interrupt enabled

RXIE

Bit 2: RX Interrupt enable.

Allowed values:
0: Disabled: Receive (RXNE) interrupt disabled
1: Enabled: Receive (RXNE) interrupt enabled

ADDRIE

Bit 3: Address match interrupt enable (slave only).

Allowed values:
0: Disabled: Address match (ADDR) interrupts disabled
1: Enabled: Address match (ADDR) interrupts enabled

NACKIE

Bit 4: Not acknowledge received interrupt enable.

Allowed values:
0: Disabled: Not acknowledge (NACKF) received interrupts disabled
1: Enabled: Not acknowledge (NACKF) received interrupts enabled

STOPIE

Bit 5: STOP detection Interrupt enable.

Allowed values:
0: Disabled: Stop detection (STOPF) interrupt disabled
1: Enabled: Stop detection (STOPF) interrupt enabled

TCIE

Bit 6: Transfer Complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

ERRIE

Bit 7: Error interrupts enable.

Allowed values:
0: Disabled: Error detection interrupts disabled
1: Enabled: Error detection interrupts enabled

DNF

Bits 8-11: Digital noise filter.

Allowed values:
0: NoFilter: Digital filter disabled
1: Filter1: Digital filter enabled and filtering capability up to 1 tI2CCLK
2: Filter2: Digital filter enabled and filtering capability up to 2 tI2CCLK
3: Filter3: Digital filter enabled and filtering capability up to 3 tI2CCLK
4: Filter4: Digital filter enabled and filtering capability up to 4 tI2CCLK
5: Filter5: Digital filter enabled and filtering capability up to 5 tI2CCLK
6: Filter6: Digital filter enabled and filtering capability up to 6 tI2CCLK
7: Filter7: Digital filter enabled and filtering capability up to 7 tI2CCLK
8: Filter8: Digital filter enabled and filtering capability up to 8 tI2CCLK
9: Filter9: Digital filter enabled and filtering capability up to 9 tI2CCLK
10: Filter10: Digital filter enabled and filtering capability up to 10 tI2CCLK
11: Filter11: Digital filter enabled and filtering capability up to 11 tI2CCLK
12: Filter12: Digital filter enabled and filtering capability up to 12 tI2CCLK
13: Filter13: Digital filter enabled and filtering capability up to 13 tI2CCLK
14: Filter14: Digital filter enabled and filtering capability up to 14 tI2CCLK
15: Filter15: Digital filter enabled and filtering capability up to 15 tI2CCLK

ANFOFF

Bit 12: Analog noise filter OFF.

Allowed values:
0: Enabled: Analog noise filter enabled
1: Disabled: Analog noise filter disabled

TXDMAEN

Bit 14: DMA transmission requests enable.

Allowed values:
0: Disabled: DMA mode disabled for transmission
1: Enabled: DMA mode enabled for transmission

RXDMAEN

Bit 15: DMA reception requests enable.

Allowed values:
0: Disabled: DMA mode disabled for reception
1: Enabled: DMA mode enabled for reception

SBC

Bit 16: Slave byte control.

Allowed values:
0: Disabled: Slave byte control disabled
1: Enabled: Slave byte control enabled

NOSTRETCH

Bit 17: Clock stretching disable.

Allowed values:
0: Enabled: Clock stretching enabled
1: Disabled: Clock stretching disabled

WUPEN

Bit 18: Wakeup from STOP enable.

Allowed values:
0: Disabled: Wakeup from Stop mode disabled
1: Enabled: Wakeup from Stop mode enabled

GCEN

Bit 19: General call enable.

Allowed values:
0: Disabled: General call disabled. Address 0b00000000 is NACKed
1: Enabled: General call enabled. Address 0b00000000 is ACKed

SMBHEN

Bit 20: SMBus Host address enable.

Allowed values:
0: Disabled: Host address disabled. Address 0b0001000x is NACKed
1: Enabled: Host address enabled. Address 0b0001000x is ACKed

SMBDEN

Bit 21: SMBus Device Default address enable.

Allowed values:
0: Disabled: Device default address disabled. Address 0b1100001x is NACKed
1: Enabled: Device default address enabled. Address 0b1100001x is ACKed

ALERTEN

Bit 22: SMBUS alert enable.

Allowed values:
0: Disabled: In device mode (SMBHEN=Disabled) Releases SMBA pin high and Alert Response Address Header disabled (0001100x) followed by NACK. In host mode (SMBHEN=Enabled) SMBus Alert pin (SMBA) not supported
1: Enabled: In device mode (SMBHEN=Disabled) Drives SMBA pin low and Alert Response Address Header enabled (0001100x) followed by ACK.In host mode (SMBHEN=Enabled) SMBus Alert pin (SMBA) supported

PECEN

Bit 23: PEC enable.

Allowed values:
0: Disabled: PEC calculation disabled
1: Enabled: PEC calculation enabled

CR2

Control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

11/11 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
					PECBYTE rw	AUTOEND rw	RELOAD rw	NBYTES rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
NACK rw	STOP rw	START rw	HEAD10R rw	ADD10 rw	RD_WRN rw	SADD rw

Toggle fields

SADD

Bits 0-9: Slave address bit (master mode).

Allowed values: 0x0-0x3ff

RD_WRN

Bit 10: Transfer direction (master mode).

Allowed values:
0: Write: Master requests a write transfer
1: Read: Master requests a read transfer

ADD10

Bit 11: 10-bit addressing mode (master mode).

Allowed values:
0: Bit7: The master operates in 7-bit addressing mode
1: Bit10: The master operates in 10-bit addressing mode

HEAD10R

Bit 12: 10-bit address header only read direction (master receiver mode).

Allowed values:
0: Complete: The master sends the complete 10 bit slave address read sequence
1: Partial: The master only sends the 1st 7 bits of the 10 bit address, followed by Read direction

START

Bit 13: Start generation.

Allowed values:
0: NoStart: No Start generation
1: Start: Restart/Start generation

STOP

Bit 14: Stop generation (master mode).

Allowed values:
0: NoStop: No Stop generation
1: Stop: Stop generation after current byte transfer

NACK

Bit 15: NACK generation (slave mode).

Allowed values:
0: Ack: an ACK is sent after current received byte
1: Nack: a NACK is sent after current received byte

NBYTES

Bits 16-23: Number of bytes.

Allowed values: 0x0-0xff

RELOAD

Bit 24: NBYTES reload mode.

Allowed values:
0: Completed: The transfer is completed after the NBYTES data transfer (STOP or RESTART will follow)
1: NotCompleted: The transfer is not completed after the NBYTES data transfer (NBYTES will be reloaded)

AUTOEND

Bit 25: Automatic end mode (master mode).

Allowed values:
0: Software: Software end mode: TC flag is set when NBYTES data are transferred, stretching SCL low
1: Automatic: Automatic end mode: a STOP condition is automatically sent when NBYTES data are transferred

PECBYTE

Bit 26: Packet error checking byte.

Allowed values:
0: NoPec: No PEC transfer
1: Pec: PEC transmission/reception is requested

OAR1

Own address register 1

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OA1EN rw					OA1MODE rw	OA1 rw

Toggle fields

OA1

Bits 0-9: Interface address.

Allowed values: 0x0-0x3ff

OA1MODE

Bit 10: Own Address 1 10-bit mode.

Allowed values:
0: Bit7: Own address 1 is a 7-bit address
1: Bit10: Own address 1 is a 10-bit address

OA1EN

Bit 15: Own Address 1 enable.

Allowed values:
0: Disabled: Own address 1 disabled. The received slave address OA1 is NACKed
1: Enabled: Own address 1 enabled. The received slave address OA1 is ACKed

OAR2

Own address register 2

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OA2EN rw					OA2MSK rw			OA2 rw

Toggle fields

OA2

Bits 1-7: Interface address.

Allowed values: 0x0-0x7f

OA2MSK

Bits 8-10: Own Address 2 masks.

Allowed values:
0: NoMask: No mask
1: Mask1: OA2[1] is masked and don’t care. Only OA2[7:2] are compared
2: Mask2: OA2[2:1] are masked and don’t care. Only OA2[7:3] are compared
3: Mask3: OA2[3:1] are masked and don’t care. Only OA2[7:4] are compared
4: Mask4: OA2[4:1] are masked and don’t care. Only OA2[7:5] are compared
5: Mask5: OA2[5:1] are masked and don’t care. Only OA2[7:6] are compared
6: Mask6: OA2[6:1] are masked and don’t care. Only OA2[7] is compared.
7: Mask7: OA2[7:1] are masked and don’t care. No comparison is done, and all (except reserved) 7-bit received addresses are acknowledged

OA2EN

Bit 15: Own Address 2 enable.

Allowed values:
0: Disabled: Own address 2 disabled. The received slave address OA2 is NACKed
1: Enabled: Own address 2 enabled. The received slave address OA2 is ACKed

TIMINGR

Timing register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PRESC rw								SCLDEL rw				SDADEL rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SCLH rw								SCLL rw

Toggle fields

SCLL

Bits 0-7: SCL low period (master mode).

Allowed values: 0x0-0xff

SCLH

Bits 8-15: SCL high period (master mode).

Allowed values: 0x0-0xff

SDADEL

Bits 16-19: Data hold time.

Allowed values: 0x0-0xf

SCLDEL

Bits 20-23: Data setup time.

Allowed values: 0x0-0xf

PRESC

Bits 28-31: Timing prescaler.

Allowed values: 0x0-0xf

TIMEOUTR

Status register 1

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
TEXTEN rw				TIMEOUTB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
TIMOUTEN rw			TIDLE rw	TIMEOUTA rw

Toggle fields

TIMEOUTA

Bits 0-11: Bus timeout A.

Allowed values: 0x0-0xfff

TIDLE

Bit 12: Idle clock timeout detection.

Allowed values:
0: Disabled: TIMEOUTA is used to detect SCL low timeout
1: Enabled: TIMEOUTA is used to detect both SCL and SDA high timeout (bus idle condition)

TIMOUTEN

Bit 15: Clock timeout enable.

Allowed values:
0: Disabled: SCL timeout detection is disabled
1: Enabled: SCL timeout detection is enabled

TIMEOUTB

Bits 16-27: Bus timeout B.

Allowed values: 0x0-0xfff

TEXTEN

Bit 31: Extended clock timeout enable.

Allowed values:
0: Disabled: Extended clock timeout detection is disabled
1: Enabled: Extended clock timeout detection is enabled

ISR

Interrupt and Status register

Offset: 0x18, size: 32, reset: 0x00000001, access: Unspecified

17/17 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								ADDCODE r							DIR r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BUSY r		ALERT r	TIMEOUT r	PECERR r	OVR r	ARLO r	BERR r	TCR r	TC r	STOPF r	NACKF r	ADDR r	RXNE r	TXIS rw	TXE rw

Toggle fields

TXE

Bit 0: Transmit data register empty (transmitters).

Allowed values:
0: NotEmpty: TXDR register not empty
1: Empty: TXDR register empty

TXIS

Bit 1: Transmit interrupt status (transmitters).

Allowed values:
0: NotEmpty: The TXDR register is not empty
1: Empty: The TXDR register is empty and the data to be transmitted must be written in the TXDR register

RXNE

Bit 2: Receive data register not empty (receivers).

Allowed values:
0: Empty: The RXDR register is empty
1: NotEmpty: Received data is copied into the RXDR register, and is ready to be read

ADDR

Bit 3: Address matched (slave mode).

Allowed values:
0: NotMatch: Adress mismatched or not received
1: Match: Received slave address matched with one of the enabled slave addresses

NACKF

Bit 4: Not acknowledge received flag.

Allowed values:
0: NoNack: No NACK has been received
1: Nack: NACK has been received

STOPF

Bit 5: Stop detection flag.

Allowed values:
0: NoStop: No Stop condition detected
1: Stop: Stop condition detected

TC

Bit 6: Transfer Complete (master mode).

Allowed values:
0: NotComplete: Transfer is not complete
1: Complete: NBYTES has been transfered

TCR

Bit 7: Transfer Complete Reload.

Allowed values:
0: NotComplete: Transfer is not complete
1: Complete: NBYTES has been transfered

BERR

Bit 8: Bus error.

Allowed values:
0: NoError: No bus error
1: Error: Misplaced Start and Stop condition is detected

ARLO

Bit 9: Arbitration lost.

Allowed values:
0: NotLost: No arbitration lost
1: Lost: Arbitration lost

OVR

Bit 10: Overrun/Underrun (slave mode).

Allowed values:
0: NoOverrun: No overrun/underrun error occurs
1: Overrun: slave mode with NOSTRETCH=1, when an overrun/underrun error occurs

PECERR

Bit 11: PEC Error in reception.

Allowed values:
0: Match: Received PEC does match with PEC register
1: NoMatch: Received PEC does not match with PEC register

TIMEOUT

Bit 12: Timeout or t_low detection flag.

Allowed values:
0: NoTimeout: No timeout occured
1: Timeout: Timeout occured

ALERT

Bit 13: SMBus alert.

Allowed values:
0: NoAlert: SMBA alert is not detected
1: Alert: SMBA alert event is detected on SMBA pin

BUSY

Bit 15: Bus busy.

Allowed values:
0: NotBusy: No communication is in progress on the bus
1: Busy: A communication is in progress on the bus

DIR

Bit 16: Transfer direction (Slave mode).

Allowed values:
0: Write: Write transfer, slave enters receiver mode
1: Read: Read transfer, slave enters transmitter mode

ADDCODE

Bits 17-23: Address match code (Slave mode).

Allowed values: 0x0-0x7f

ICR

Interrupt clear register

Offset: 0x1c, size: 32, reset: 0x00000000, access: write-only

9/9 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		ALERTCF w	TIMOUTCF w	PECCF w	OVRCF w	ARLOCF w	BERRCF w			STOPCF w	NACKCF w	ADDRCF w

Toggle fields

ADDRCF

Bit 3: Address Matched flag clear.

Allowed values:
1: Clear: Clears the ADDR flag in ISR register

NACKCF

Bit 4: Not Acknowledge flag clear.

Allowed values:
1: Clear: Clears the NACK flag in ISR register

STOPCF

Bit 5: Stop detection flag clear.

Allowed values:
1: Clear: Clears the STOP flag in ISR register

BERRCF

Bit 8: Bus error flag clear.

Allowed values:
1: Clear: Clears the BERR flag in ISR register

ARLOCF

Bit 9: Arbitration lost flag clear.

Allowed values:
1: Clear: Clears the ARLO flag in ISR register

OVRCF

Bit 10: Overrun/Underrun flag clear.

Allowed values:
1: Clear: Clears the OVR flag in ISR register

PECCF

Bit 11: PEC Error flag clear.

Allowed values:
1: Clear: Clears the PEC flag in ISR register

TIMOUTCF

Bit 12: Timeout detection flag clear.

Allowed values:
1: Clear: Clears the TIMOUT flag in ISR register

ALERTCF

Bit 13: Alert flag clear.

Allowed values:
1: Clear: Clears the ALERT flag in ISR register

PECR

PEC register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								PEC r

Toggle fields

PEC

Bits 0-7: Packet error checking register.

Allowed values: 0x0-0xff

RXDR

Receive data register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								RXDATA r

Toggle fields

RXDATA

Bits 0-7: 8-bit receive data.

Allowed values: 0x0-0xff

TXDR

Transmit data register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								TXDATA rw

Toggle fields

TXDATA

Bits 0-7: 8-bit transmit data.

Allowed values: 0x0-0xff

I2C2

0x40005800: Inter-integrated circuit

76/76 fields covered.

Toggle register map

Offset	Name	31	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	CR1						PECEN	ALERTEN	SMBDEN	SMBHEN	GCEN	WUPEN	NOSTRETCH	SBC	RXDMAEN	TXDMAEN		ANFOFF	DNF				ERRIE	TCIE	STOPIE	NACKIE	ADDRIE	RXIE	TXIE	PE
0x4	CR2			PECBYTE	AUTOEND	RELOAD	NBYTES								NACK	STOP	START	HEAD10R	ADD10	RD_WRN	SADD
0x8	OAR1														OA1EN					OA1MODE	OA1
0xc	OAR2														OA2EN					OA2MSK			OA2
0x10	TIMINGR	PRESC					SCLDEL				SDADEL				SCLH								SCLL
0x14	TIMEOUTR	TEXTEN	TIMEOUTB												TIMOUTEN			TIDLE	TIMEOUTA
0x18	ISR						ADDCODE							DIR	BUSY		ALERT	TIMEOUT	PECERR	OVR	ARLO	BERR	TCR	TC	STOPF	NACKF	ADDR	RXNE	TXIS	TXE
0x1c	ICR																ALERTCF	TIMOUTCF	PECCF	OVRCF	ARLOCF	BERRCF			STOPCF	NACKCF	ADDRCF
0x20	PECR																						PEC
0x24	RXDR																						RXDATA
0x28	TXDR																						TXDATA

Toggle registers

CR1

Control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

20/20 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								PECEN rw	ALERTEN rw	SMBDEN rw	SMBHEN rw	GCEN rw	WUPEN rw	NOSTRETCH rw	SBC rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RXDMAEN rw	TXDMAEN rw		ANFOFF rw	DNF rw				ERRIE rw	TCIE rw	STOPIE rw	NACKIE rw	ADDRIE rw	RXIE rw	TXIE rw	PE rw

Toggle fields

PE

Bit 0: Peripheral enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

TXIE

Bit 1: TX Interrupt enable.

Allowed values:
0: Disabled: Transmit (TXIS) interrupt disabled
1: Enabled: Transmit (TXIS) interrupt enabled

RXIE

Bit 2: RX Interrupt enable.

Allowed values:
0: Disabled: Receive (RXNE) interrupt disabled
1: Enabled: Receive (RXNE) interrupt enabled

ADDRIE

Bit 3: Address match interrupt enable (slave only).

Allowed values:
0: Disabled: Address match (ADDR) interrupts disabled
1: Enabled: Address match (ADDR) interrupts enabled

NACKIE

Bit 4: Not acknowledge received interrupt enable.

Allowed values:
0: Disabled: Not acknowledge (NACKF) received interrupts disabled
1: Enabled: Not acknowledge (NACKF) received interrupts enabled

STOPIE

Bit 5: STOP detection Interrupt enable.

Allowed values:
0: Disabled: Stop detection (STOPF) interrupt disabled
1: Enabled: Stop detection (STOPF) interrupt enabled

TCIE

Bit 6: Transfer Complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

ERRIE

Bit 7: Error interrupts enable.

Allowed values:
0: Disabled: Error detection interrupts disabled
1: Enabled: Error detection interrupts enabled

DNF

Bits 8-11: Digital noise filter.

Allowed values:
0: NoFilter: Digital filter disabled
1: Filter1: Digital filter enabled and filtering capability up to 1 tI2CCLK
2: Filter2: Digital filter enabled and filtering capability up to 2 tI2CCLK
3: Filter3: Digital filter enabled and filtering capability up to 3 tI2CCLK
4: Filter4: Digital filter enabled and filtering capability up to 4 tI2CCLK
5: Filter5: Digital filter enabled and filtering capability up to 5 tI2CCLK
6: Filter6: Digital filter enabled and filtering capability up to 6 tI2CCLK
7: Filter7: Digital filter enabled and filtering capability up to 7 tI2CCLK
8: Filter8: Digital filter enabled and filtering capability up to 8 tI2CCLK
9: Filter9: Digital filter enabled and filtering capability up to 9 tI2CCLK
10: Filter10: Digital filter enabled and filtering capability up to 10 tI2CCLK
11: Filter11: Digital filter enabled and filtering capability up to 11 tI2CCLK
12: Filter12: Digital filter enabled and filtering capability up to 12 tI2CCLK
13: Filter13: Digital filter enabled and filtering capability up to 13 tI2CCLK
14: Filter14: Digital filter enabled and filtering capability up to 14 tI2CCLK
15: Filter15: Digital filter enabled and filtering capability up to 15 tI2CCLK

ANFOFF

Bit 12: Analog noise filter OFF.

Allowed values:
0: Enabled: Analog noise filter enabled
1: Disabled: Analog noise filter disabled

TXDMAEN

Bit 14: DMA transmission requests enable.

Allowed values:
0: Disabled: DMA mode disabled for transmission
1: Enabled: DMA mode enabled for transmission

RXDMAEN

Bit 15: DMA reception requests enable.

Allowed values:
0: Disabled: DMA mode disabled for reception
1: Enabled: DMA mode enabled for reception

SBC

Bit 16: Slave byte control.

Allowed values:
0: Disabled: Slave byte control disabled
1: Enabled: Slave byte control enabled

NOSTRETCH

Bit 17: Clock stretching disable.

Allowed values:
0: Enabled: Clock stretching enabled
1: Disabled: Clock stretching disabled

WUPEN

Bit 18: Wakeup from STOP enable.

Allowed values:
0: Disabled: Wakeup from Stop mode disabled
1: Enabled: Wakeup from Stop mode enabled

GCEN

Bit 19: General call enable.

Allowed values:
0: Disabled: General call disabled. Address 0b00000000 is NACKed
1: Enabled: General call enabled. Address 0b00000000 is ACKed

SMBHEN

Bit 20: SMBus Host address enable.

Allowed values:
0: Disabled: Host address disabled. Address 0b0001000x is NACKed
1: Enabled: Host address enabled. Address 0b0001000x is ACKed

SMBDEN

Bit 21: SMBus Device Default address enable.

Allowed values:
0: Disabled: Device default address disabled. Address 0b1100001x is NACKed
1: Enabled: Device default address enabled. Address 0b1100001x is ACKed

ALERTEN

Bit 22: SMBUS alert enable.

Allowed values:
0: Disabled: In device mode (SMBHEN=Disabled) Releases SMBA pin high and Alert Response Address Header disabled (0001100x) followed by NACK. In host mode (SMBHEN=Enabled) SMBus Alert pin (SMBA) not supported
1: Enabled: In device mode (SMBHEN=Disabled) Drives SMBA pin low and Alert Response Address Header enabled (0001100x) followed by ACK.In host mode (SMBHEN=Enabled) SMBus Alert pin (SMBA) supported

PECEN

Bit 23: PEC enable.

Allowed values:
0: Disabled: PEC calculation disabled
1: Enabled: PEC calculation enabled

CR2

Control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

11/11 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
					PECBYTE rw	AUTOEND rw	RELOAD rw	NBYTES rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
NACK rw	STOP rw	START rw	HEAD10R rw	ADD10 rw	RD_WRN rw	SADD rw

Toggle fields

SADD

Bits 0-9: Slave address bit (master mode).

Allowed values: 0x0-0x3ff

RD_WRN

Bit 10: Transfer direction (master mode).

Allowed values:
0: Write: Master requests a write transfer
1: Read: Master requests a read transfer

ADD10

Bit 11: 10-bit addressing mode (master mode).

Allowed values:
0: Bit7: The master operates in 7-bit addressing mode
1: Bit10: The master operates in 10-bit addressing mode

HEAD10R

Bit 12: 10-bit address header only read direction (master receiver mode).

Allowed values:
0: Complete: The master sends the complete 10 bit slave address read sequence
1: Partial: The master only sends the 1st 7 bits of the 10 bit address, followed by Read direction

START

Bit 13: Start generation.

Allowed values:
0: NoStart: No Start generation
1: Start: Restart/Start generation

STOP

Bit 14: Stop generation (master mode).

Allowed values:
0: NoStop: No Stop generation
1: Stop: Stop generation after current byte transfer

NACK

Bit 15: NACK generation (slave mode).

Allowed values:
0: Ack: an ACK is sent after current received byte
1: Nack: a NACK is sent after current received byte

NBYTES

Bits 16-23: Number of bytes.

Allowed values: 0x0-0xff

RELOAD

Bit 24: NBYTES reload mode.

Allowed values:
0: Completed: The transfer is completed after the NBYTES data transfer (STOP or RESTART will follow)
1: NotCompleted: The transfer is not completed after the NBYTES data transfer (NBYTES will be reloaded)

AUTOEND

Bit 25: Automatic end mode (master mode).

Allowed values:
0: Software: Software end mode: TC flag is set when NBYTES data are transferred, stretching SCL low
1: Automatic: Automatic end mode: a STOP condition is automatically sent when NBYTES data are transferred

PECBYTE

Bit 26: Packet error checking byte.

Allowed values:
0: NoPec: No PEC transfer
1: Pec: PEC transmission/reception is requested

OAR1

Own address register 1

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OA1EN rw					OA1MODE rw	OA1 rw

Toggle fields

OA1

Bits 0-9: Interface address.

Allowed values: 0x0-0x3ff

OA1MODE

Bit 10: Own Address 1 10-bit mode.

Allowed values:
0: Bit7: Own address 1 is a 7-bit address
1: Bit10: Own address 1 is a 10-bit address

OA1EN

Bit 15: Own Address 1 enable.

Allowed values:
0: Disabled: Own address 1 disabled. The received slave address OA1 is NACKed
1: Enabled: Own address 1 enabled. The received slave address OA1 is ACKed

OAR2

Own address register 2

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OA2EN rw					OA2MSK rw			OA2 rw

Toggle fields

OA2

Bits 1-7: Interface address.

Allowed values: 0x0-0x7f

OA2MSK

Bits 8-10: Own Address 2 masks.

Allowed values:
0: NoMask: No mask
1: Mask1: OA2[1] is masked and don’t care. Only OA2[7:2] are compared
2: Mask2: OA2[2:1] are masked and don’t care. Only OA2[7:3] are compared
3: Mask3: OA2[3:1] are masked and don’t care. Only OA2[7:4] are compared
4: Mask4: OA2[4:1] are masked and don’t care. Only OA2[7:5] are compared
5: Mask5: OA2[5:1] are masked and don’t care. Only OA2[7:6] are compared
6: Mask6: OA2[6:1] are masked and don’t care. Only OA2[7] is compared.
7: Mask7: OA2[7:1] are masked and don’t care. No comparison is done, and all (except reserved) 7-bit received addresses are acknowledged

OA2EN

Bit 15: Own Address 2 enable.

Allowed values:
0: Disabled: Own address 2 disabled. The received slave address OA2 is NACKed
1: Enabled: Own address 2 enabled. The received slave address OA2 is ACKed

TIMINGR

Timing register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PRESC rw								SCLDEL rw				SDADEL rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SCLH rw								SCLL rw

Toggle fields

SCLL

Bits 0-7: SCL low period (master mode).

Allowed values: 0x0-0xff

SCLH

Bits 8-15: SCL high period (master mode).

Allowed values: 0x0-0xff

SDADEL

Bits 16-19: Data hold time.

Allowed values: 0x0-0xf

SCLDEL

Bits 20-23: Data setup time.

Allowed values: 0x0-0xf

PRESC

Bits 28-31: Timing prescaler.

Allowed values: 0x0-0xf

TIMEOUTR

Status register 1

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
TEXTEN rw				TIMEOUTB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
TIMOUTEN rw			TIDLE rw	TIMEOUTA rw

Toggle fields

TIMEOUTA

Bits 0-11: Bus timeout A.

Allowed values: 0x0-0xfff

TIDLE

Bit 12: Idle clock timeout detection.

Allowed values:
0: Disabled: TIMEOUTA is used to detect SCL low timeout
1: Enabled: TIMEOUTA is used to detect both SCL and SDA high timeout (bus idle condition)

TIMOUTEN

Bit 15: Clock timeout enable.

Allowed values:
0: Disabled: SCL timeout detection is disabled
1: Enabled: SCL timeout detection is enabled

TIMEOUTB

Bits 16-27: Bus timeout B.

Allowed values: 0x0-0xfff

TEXTEN

Bit 31: Extended clock timeout enable.

Allowed values:
0: Disabled: Extended clock timeout detection is disabled
1: Enabled: Extended clock timeout detection is enabled

ISR

Interrupt and Status register

Offset: 0x18, size: 32, reset: 0x00000001, access: Unspecified

17/17 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								ADDCODE r							DIR r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BUSY r		ALERT r	TIMEOUT r	PECERR r	OVR r	ARLO r	BERR r	TCR r	TC r	STOPF r	NACKF r	ADDR r	RXNE r	TXIS rw	TXE rw

Toggle fields

TXE

Bit 0: Transmit data register empty (transmitters).

Allowed values:
0: NotEmpty: TXDR register not empty
1: Empty: TXDR register empty

TXIS

Bit 1: Transmit interrupt status (transmitters).

Allowed values:
0: NotEmpty: The TXDR register is not empty
1: Empty: The TXDR register is empty and the data to be transmitted must be written in the TXDR register

RXNE

Bit 2: Receive data register not empty (receivers).

Allowed values:
0: Empty: The RXDR register is empty
1: NotEmpty: Received data is copied into the RXDR register, and is ready to be read

ADDR

Bit 3: Address matched (slave mode).

Allowed values:
0: NotMatch: Adress mismatched or not received
1: Match: Received slave address matched with one of the enabled slave addresses

NACKF

Bit 4: Not acknowledge received flag.

Allowed values:
0: NoNack: No NACK has been received
1: Nack: NACK has been received

STOPF

Bit 5: Stop detection flag.

Allowed values:
0: NoStop: No Stop condition detected
1: Stop: Stop condition detected

TC

Bit 6: Transfer Complete (master mode).

Allowed values:
0: NotComplete: Transfer is not complete
1: Complete: NBYTES has been transfered

TCR

Bit 7: Transfer Complete Reload.

Allowed values:
0: NotComplete: Transfer is not complete
1: Complete: NBYTES has been transfered

BERR

Bit 8: Bus error.

Allowed values:
0: NoError: No bus error
1: Error: Misplaced Start and Stop condition is detected

ARLO

Bit 9: Arbitration lost.

Allowed values:
0: NotLost: No arbitration lost
1: Lost: Arbitration lost

OVR

Bit 10: Overrun/Underrun (slave mode).

Allowed values:
0: NoOverrun: No overrun/underrun error occurs
1: Overrun: slave mode with NOSTRETCH=1, when an overrun/underrun error occurs

PECERR

Bit 11: PEC Error in reception.

Allowed values:
0: Match: Received PEC does match with PEC register
1: NoMatch: Received PEC does not match with PEC register

TIMEOUT

Bit 12: Timeout or t_low detection flag.

Allowed values:
0: NoTimeout: No timeout occured
1: Timeout: Timeout occured

ALERT

Bit 13: SMBus alert.

Allowed values:
0: NoAlert: SMBA alert is not detected
1: Alert: SMBA alert event is detected on SMBA pin

BUSY

Bit 15: Bus busy.

Allowed values:
0: NotBusy: No communication is in progress on the bus
1: Busy: A communication is in progress on the bus

DIR

Bit 16: Transfer direction (Slave mode).

Allowed values:
0: Write: Write transfer, slave enters receiver mode
1: Read: Read transfer, slave enters transmitter mode

ADDCODE

Bits 17-23: Address match code (Slave mode).

Allowed values: 0x0-0x7f

ICR

Interrupt clear register

Offset: 0x1c, size: 32, reset: 0x00000000, access: write-only

9/9 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		ALERTCF w	TIMOUTCF w	PECCF w	OVRCF w	ARLOCF w	BERRCF w			STOPCF w	NACKCF w	ADDRCF w

Toggle fields

ADDRCF

Bit 3: Address Matched flag clear.

Allowed values:
1: Clear: Clears the ADDR flag in ISR register

NACKCF

Bit 4: Not Acknowledge flag clear.

Allowed values:
1: Clear: Clears the NACK flag in ISR register

STOPCF

Bit 5: Stop detection flag clear.

Allowed values:
1: Clear: Clears the STOP flag in ISR register

BERRCF

Bit 8: Bus error flag clear.

Allowed values:
1: Clear: Clears the BERR flag in ISR register

ARLOCF

Bit 9: Arbitration lost flag clear.

Allowed values:
1: Clear: Clears the ARLO flag in ISR register

OVRCF

Bit 10: Overrun/Underrun flag clear.

Allowed values:
1: Clear: Clears the OVR flag in ISR register

PECCF

Bit 11: PEC Error flag clear.

Allowed values:
1: Clear: Clears the PEC flag in ISR register

TIMOUTCF

Bit 12: Timeout detection flag clear.

Allowed values:
1: Clear: Clears the TIMOUT flag in ISR register

ALERTCF

Bit 13: Alert flag clear.

Allowed values:
1: Clear: Clears the ALERT flag in ISR register

PECR

PEC register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								PEC r

Toggle fields

PEC

Bits 0-7: Packet error checking register.

Allowed values: 0x0-0xff

RXDR

Receive data register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								RXDATA r

Toggle fields

RXDATA

Bits 0-7: 8-bit receive data.

Allowed values: 0x0-0xff

TXDR

Transmit data register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								TXDATA rw

Toggle fields

TXDATA

Bits 0-7: 8-bit transmit data.

Allowed values: 0x0-0xff

I2C3

0x40005c00: Inter-integrated circuit

76/76 fields covered.

Toggle register map

Offset	Name	31	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	CR1						PECEN	ALERTEN	SMBDEN	SMBHEN	GCEN	WUPEN	NOSTRETCH	SBC	RXDMAEN	TXDMAEN		ANFOFF	DNF				ERRIE	TCIE	STOPIE	NACKIE	ADDRIE	RXIE	TXIE	PE
0x4	CR2			PECBYTE	AUTOEND	RELOAD	NBYTES								NACK	STOP	START	HEAD10R	ADD10	RD_WRN	SADD
0x8	OAR1														OA1EN					OA1MODE	OA1
0xc	OAR2														OA2EN					OA2MSK			OA2
0x10	TIMINGR	PRESC					SCLDEL				SDADEL				SCLH								SCLL
0x14	TIMEOUTR	TEXTEN	TIMEOUTB												TIMOUTEN			TIDLE	TIMEOUTA
0x18	ISR						ADDCODE							DIR	BUSY		ALERT	TIMEOUT	PECERR	OVR	ARLO	BERR	TCR	TC	STOPF	NACKF	ADDR	RXNE	TXIS	TXE
0x1c	ICR																ALERTCF	TIMOUTCF	PECCF	OVRCF	ARLOCF	BERRCF			STOPCF	NACKCF	ADDRCF
0x20	PECR																						PEC
0x24	RXDR																						RXDATA
0x28	TXDR																						TXDATA

Toggle registers

CR1

Control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

20/20 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								PECEN rw	ALERTEN rw	SMBDEN rw	SMBHEN rw	GCEN rw	WUPEN rw	NOSTRETCH rw	SBC rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RXDMAEN rw	TXDMAEN rw		ANFOFF rw	DNF rw				ERRIE rw	TCIE rw	STOPIE rw	NACKIE rw	ADDRIE rw	RXIE rw	TXIE rw	PE rw

Toggle fields

PE

Bit 0: Peripheral enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

TXIE

Bit 1: TX Interrupt enable.

Allowed values:
0: Disabled: Transmit (TXIS) interrupt disabled
1: Enabled: Transmit (TXIS) interrupt enabled

RXIE

Bit 2: RX Interrupt enable.

Allowed values:
0: Disabled: Receive (RXNE) interrupt disabled
1: Enabled: Receive (RXNE) interrupt enabled

ADDRIE

Bit 3: Address match interrupt enable (slave only).

Allowed values:
0: Disabled: Address match (ADDR) interrupts disabled
1: Enabled: Address match (ADDR) interrupts enabled

NACKIE

Bit 4: Not acknowledge received interrupt enable.

Allowed values:
0: Disabled: Not acknowledge (NACKF) received interrupts disabled
1: Enabled: Not acknowledge (NACKF) received interrupts enabled

STOPIE

Bit 5: STOP detection Interrupt enable.

Allowed values:
0: Disabled: Stop detection (STOPF) interrupt disabled
1: Enabled: Stop detection (STOPF) interrupt enabled

TCIE

Bit 6: Transfer Complete interrupt enable.

Allowed values:
0: Disabled: Transfer Complete interrupt disabled
1: Enabled: Transfer Complete interrupt enabled

ERRIE

Bit 7: Error interrupts enable.

Allowed values:
0: Disabled: Error detection interrupts disabled
1: Enabled: Error detection interrupts enabled

DNF

Bits 8-11: Digital noise filter.

Allowed values:
0: NoFilter: Digital filter disabled
1: Filter1: Digital filter enabled and filtering capability up to 1 tI2CCLK
2: Filter2: Digital filter enabled and filtering capability up to 2 tI2CCLK
3: Filter3: Digital filter enabled and filtering capability up to 3 tI2CCLK
4: Filter4: Digital filter enabled and filtering capability up to 4 tI2CCLK
5: Filter5: Digital filter enabled and filtering capability up to 5 tI2CCLK
6: Filter6: Digital filter enabled and filtering capability up to 6 tI2CCLK
7: Filter7: Digital filter enabled and filtering capability up to 7 tI2CCLK
8: Filter8: Digital filter enabled and filtering capability up to 8 tI2CCLK
9: Filter9: Digital filter enabled and filtering capability up to 9 tI2CCLK
10: Filter10: Digital filter enabled and filtering capability up to 10 tI2CCLK
11: Filter11: Digital filter enabled and filtering capability up to 11 tI2CCLK
12: Filter12: Digital filter enabled and filtering capability up to 12 tI2CCLK
13: Filter13: Digital filter enabled and filtering capability up to 13 tI2CCLK
14: Filter14: Digital filter enabled and filtering capability up to 14 tI2CCLK
15: Filter15: Digital filter enabled and filtering capability up to 15 tI2CCLK

ANFOFF

Bit 12: Analog noise filter OFF.

Allowed values:
0: Enabled: Analog noise filter enabled
1: Disabled: Analog noise filter disabled

TXDMAEN

Bit 14: DMA transmission requests enable.

Allowed values:
0: Disabled: DMA mode disabled for transmission
1: Enabled: DMA mode enabled for transmission

RXDMAEN

Bit 15: DMA reception requests enable.

Allowed values:
0: Disabled: DMA mode disabled for reception
1: Enabled: DMA mode enabled for reception

SBC

Bit 16: Slave byte control.

Allowed values:
0: Disabled: Slave byte control disabled
1: Enabled: Slave byte control enabled

NOSTRETCH

Bit 17: Clock stretching disable.

Allowed values:
0: Enabled: Clock stretching enabled
1: Disabled: Clock stretching disabled

WUPEN

Bit 18: Wakeup from STOP enable.

Allowed values:
0: Disabled: Wakeup from Stop mode disabled
1: Enabled: Wakeup from Stop mode enabled

GCEN

Bit 19: General call enable.

Allowed values:
0: Disabled: General call disabled. Address 0b00000000 is NACKed
1: Enabled: General call enabled. Address 0b00000000 is ACKed

SMBHEN

Bit 20: SMBus Host address enable.

Allowed values:
0: Disabled: Host address disabled. Address 0b0001000x is NACKed
1: Enabled: Host address enabled. Address 0b0001000x is ACKed

SMBDEN

Bit 21: SMBus Device Default address enable.

Allowed values:
0: Disabled: Device default address disabled. Address 0b1100001x is NACKed
1: Enabled: Device default address enabled. Address 0b1100001x is ACKed

ALERTEN

Bit 22: SMBUS alert enable.

Allowed values:
0: Disabled: In device mode (SMBHEN=Disabled) Releases SMBA pin high and Alert Response Address Header disabled (0001100x) followed by NACK. In host mode (SMBHEN=Enabled) SMBus Alert pin (SMBA) not supported
1: Enabled: In device mode (SMBHEN=Disabled) Drives SMBA pin low and Alert Response Address Header enabled (0001100x) followed by ACK.In host mode (SMBHEN=Enabled) SMBus Alert pin (SMBA) supported

PECEN

Bit 23: PEC enable.

Allowed values:
0: Disabled: PEC calculation disabled
1: Enabled: PEC calculation enabled

CR2

Control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

11/11 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
					PECBYTE rw	AUTOEND rw	RELOAD rw	NBYTES rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
NACK rw	STOP rw	START rw	HEAD10R rw	ADD10 rw	RD_WRN rw	SADD rw

Toggle fields

SADD

Bits 0-9: Slave address bit (master mode).

Allowed values: 0x0-0x3ff

RD_WRN

Bit 10: Transfer direction (master mode).

Allowed values:
0: Write: Master requests a write transfer
1: Read: Master requests a read transfer

ADD10

Bit 11: 10-bit addressing mode (master mode).

Allowed values:
0: Bit7: The master operates in 7-bit addressing mode
1: Bit10: The master operates in 10-bit addressing mode

HEAD10R

Bit 12: 10-bit address header only read direction (master receiver mode).

Allowed values:
0: Complete: The master sends the complete 10 bit slave address read sequence
1: Partial: The master only sends the 1st 7 bits of the 10 bit address, followed by Read direction

START

Bit 13: Start generation.

Allowed values:
0: NoStart: No Start generation
1: Start: Restart/Start generation

STOP

Bit 14: Stop generation (master mode).

Allowed values:
0: NoStop: No Stop generation
1: Stop: Stop generation after current byte transfer

NACK

Bit 15: NACK generation (slave mode).

Allowed values:
0: Ack: an ACK is sent after current received byte
1: Nack: a NACK is sent after current received byte

NBYTES

Bits 16-23: Number of bytes.

Allowed values: 0x0-0xff

RELOAD

Bit 24: NBYTES reload mode.

Allowed values:
0: Completed: The transfer is completed after the NBYTES data transfer (STOP or RESTART will follow)
1: NotCompleted: The transfer is not completed after the NBYTES data transfer (NBYTES will be reloaded)

AUTOEND

Bit 25: Automatic end mode (master mode).

Allowed values:
0: Software: Software end mode: TC flag is set when NBYTES data are transferred, stretching SCL low
1: Automatic: Automatic end mode: a STOP condition is automatically sent when NBYTES data are transferred

PECBYTE

Bit 26: Packet error checking byte.

Allowed values:
0: NoPec: No PEC transfer
1: Pec: PEC transmission/reception is requested

OAR1

Own address register 1

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OA1EN rw					OA1MODE rw	OA1 rw

Toggle fields

OA1

Bits 0-9: Interface address.

Allowed values: 0x0-0x3ff

OA1MODE

Bit 10: Own Address 1 10-bit mode.

Allowed values:
0: Bit7: Own address 1 is a 7-bit address
1: Bit10: Own address 1 is a 10-bit address

OA1EN

Bit 15: Own Address 1 enable.

Allowed values:
0: Disabled: Own address 1 disabled. The received slave address OA1 is NACKed
1: Enabled: Own address 1 enabled. The received slave address OA1 is ACKed

OAR2

Own address register 2

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OA2EN rw					OA2MSK rw			OA2 rw

Toggle fields

OA2

Bits 1-7: Interface address.

Allowed values: 0x0-0x7f

OA2MSK

Bits 8-10: Own Address 2 masks.

Allowed values:
0: NoMask: No mask
1: Mask1: OA2[1] is masked and don’t care. Only OA2[7:2] are compared
2: Mask2: OA2[2:1] are masked and don’t care. Only OA2[7:3] are compared
3: Mask3: OA2[3:1] are masked and don’t care. Only OA2[7:4] are compared
4: Mask4: OA2[4:1] are masked and don’t care. Only OA2[7:5] are compared
5: Mask5: OA2[5:1] are masked and don’t care. Only OA2[7:6] are compared
6: Mask6: OA2[6:1] are masked and don’t care. Only OA2[7] is compared.
7: Mask7: OA2[7:1] are masked and don’t care. No comparison is done, and all (except reserved) 7-bit received addresses are acknowledged

OA2EN

Bit 15: Own Address 2 enable.

Allowed values:
0: Disabled: Own address 2 disabled. The received slave address OA2 is NACKed
1: Enabled: Own address 2 enabled. The received slave address OA2 is ACKed

TIMINGR

Timing register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PRESC rw								SCLDEL rw				SDADEL rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SCLH rw								SCLL rw

Toggle fields

SCLL

Bits 0-7: SCL low period (master mode).

Allowed values: 0x0-0xff

SCLH

Bits 8-15: SCL high period (master mode).

Allowed values: 0x0-0xff

SDADEL

Bits 16-19: Data hold time.

Allowed values: 0x0-0xf

SCLDEL

Bits 20-23: Data setup time.

Allowed values: 0x0-0xf

PRESC

Bits 28-31: Timing prescaler.

Allowed values: 0x0-0xf

TIMEOUTR

Status register 1

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
TEXTEN rw				TIMEOUTB rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
TIMOUTEN rw			TIDLE rw	TIMEOUTA rw

Toggle fields

TIMEOUTA

Bits 0-11: Bus timeout A.

Allowed values: 0x0-0xfff

TIDLE

Bit 12: Idle clock timeout detection.

Allowed values:
0: Disabled: TIMEOUTA is used to detect SCL low timeout
1: Enabled: TIMEOUTA is used to detect both SCL and SDA high timeout (bus idle condition)

TIMOUTEN

Bit 15: Clock timeout enable.

Allowed values:
0: Disabled: SCL timeout detection is disabled
1: Enabled: SCL timeout detection is enabled

TIMEOUTB

Bits 16-27: Bus timeout B.

Allowed values: 0x0-0xfff

TEXTEN

Bit 31: Extended clock timeout enable.

Allowed values:
0: Disabled: Extended clock timeout detection is disabled
1: Enabled: Extended clock timeout detection is enabled

ISR

Interrupt and Status register

Offset: 0x18, size: 32, reset: 0x00000001, access: Unspecified

17/17 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								ADDCODE r							DIR r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BUSY r		ALERT r	TIMEOUT r	PECERR r	OVR r	ARLO r	BERR r	TCR r	TC r	STOPF r	NACKF r	ADDR r	RXNE r	TXIS rw	TXE rw

Toggle fields

TXE

Bit 0: Transmit data register empty (transmitters).

Allowed values:
0: NotEmpty: TXDR register not empty
1: Empty: TXDR register empty

TXIS

Bit 1: Transmit interrupt status (transmitters).

Allowed values:
0: NotEmpty: The TXDR register is not empty
1: Empty: The TXDR register is empty and the data to be transmitted must be written in the TXDR register

RXNE

Bit 2: Receive data register not empty (receivers).

Allowed values:
0: Empty: The RXDR register is empty
1: NotEmpty: Received data is copied into the RXDR register, and is ready to be read

ADDR

Bit 3: Address matched (slave mode).

Allowed values:
0: NotMatch: Adress mismatched or not received
1: Match: Received slave address matched with one of the enabled slave addresses

NACKF

Bit 4: Not acknowledge received flag.

Allowed values:
0: NoNack: No NACK has been received
1: Nack: NACK has been received

STOPF

Bit 5: Stop detection flag.

Allowed values:
0: NoStop: No Stop condition detected
1: Stop: Stop condition detected

TC

Bit 6: Transfer Complete (master mode).

Allowed values:
0: NotComplete: Transfer is not complete
1: Complete: NBYTES has been transfered

TCR

Bit 7: Transfer Complete Reload.

Allowed values:
0: NotComplete: Transfer is not complete
1: Complete: NBYTES has been transfered

BERR

Bit 8: Bus error.

Allowed values:
0: NoError: No bus error
1: Error: Misplaced Start and Stop condition is detected

ARLO

Bit 9: Arbitration lost.

Allowed values:
0: NotLost: No arbitration lost
1: Lost: Arbitration lost

OVR

Bit 10: Overrun/Underrun (slave mode).

Allowed values:
0: NoOverrun: No overrun/underrun error occurs
1: Overrun: slave mode with NOSTRETCH=1, when an overrun/underrun error occurs

PECERR

Bit 11: PEC Error in reception.

Allowed values:
0: Match: Received PEC does match with PEC register
1: NoMatch: Received PEC does not match with PEC register

TIMEOUT

Bit 12: Timeout or t_low detection flag.

Allowed values:
0: NoTimeout: No timeout occured
1: Timeout: Timeout occured

ALERT

Bit 13: SMBus alert.

Allowed values:
0: NoAlert: SMBA alert is not detected
1: Alert: SMBA alert event is detected on SMBA pin

BUSY

Bit 15: Bus busy.

Allowed values:
0: NotBusy: No communication is in progress on the bus
1: Busy: A communication is in progress on the bus

DIR

Bit 16: Transfer direction (Slave mode).

Allowed values:
0: Write: Write transfer, slave enters receiver mode
1: Read: Read transfer, slave enters transmitter mode

ADDCODE

Bits 17-23: Address match code (Slave mode).

Allowed values: 0x0-0x7f

ICR

Interrupt clear register

Offset: 0x1c, size: 32, reset: 0x00000000, access: write-only

9/9 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		ALERTCF w	TIMOUTCF w	PECCF w	OVRCF w	ARLOCF w	BERRCF w			STOPCF w	NACKCF w	ADDRCF w

Toggle fields

ADDRCF

Bit 3: Address Matched flag clear.

Allowed values:
1: Clear: Clears the ADDR flag in ISR register

NACKCF

Bit 4: Not Acknowledge flag clear.

Allowed values:
1: Clear: Clears the NACK flag in ISR register

STOPCF

Bit 5: Stop detection flag clear.

Allowed values:
1: Clear: Clears the STOP flag in ISR register

BERRCF

Bit 8: Bus error flag clear.

Allowed values:
1: Clear: Clears the BERR flag in ISR register

ARLOCF

Bit 9: Arbitration lost flag clear.

Allowed values:
1: Clear: Clears the ARLO flag in ISR register

OVRCF

Bit 10: Overrun/Underrun flag clear.

Allowed values:
1: Clear: Clears the OVR flag in ISR register

PECCF

Bit 11: PEC Error flag clear.

Allowed values:
1: Clear: Clears the PEC flag in ISR register

TIMOUTCF

Bit 12: Timeout detection flag clear.

Allowed values:
1: Clear: Clears the TIMOUT flag in ISR register

ALERTCF

Bit 13: Alert flag clear.

Allowed values:
1: Clear: Clears the ALERT flag in ISR register

PECR

PEC register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								PEC r

Toggle fields

PEC

Bits 0-7: Packet error checking register.

Allowed values: 0x0-0xff

RXDR

Receive data register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								RXDATA r

Toggle fields

RXDATA

Bits 0-7: 8-bit receive data.

Allowed values: 0x0-0xff

TXDR

Transmit data register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								TXDATA rw

Toggle fields

TXDATA

Bits 0-7: 8-bit transmit data.

Allowed values: 0x0-0xff

IWDG

0x40003000: Independent watchdog

7/7 fields covered.

Toggle register map

Offset	Name	15	11	2	1	0
0x0	KR	KEY
0x4	PR			PR
0x8	RLR		RL
0xc	SR			WVU	RVU	PVU
0x10	WINR		WIN

Toggle registers

KR

Key register

Offset: 0x0, size: 32, reset: 0x00000000, access: write-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
KEY w

Toggle fields

KEY

Bits 0-15: Key value (write only, read 0x0000).

Allowed values:
21845: Unlock: Enable access to PR, RLR and WINR registers
43690: Feed: Feed watchdog with RLR register value
52428: Start: Start the watchdog

PR

Prescaler register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
													PR rw

Toggle fields

PR

Bits 0-2: Prescaler divider.

Allowed values:
0: DivideBy4: Divider /4
1: DivideBy8: Divider /8
2: DivideBy16: Divider /16
3: DivideBy32: Divider /32
4: DivideBy64: Divider /64
5: DivideBy128: Divider /128
6: DivideBy256: Divider /256

RLR

Reload register

Offset: 0x8, size: 32, reset: 0x00000FFF, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				RL rw

Toggle fields

RL

Bits 0-11: Watchdog counter reload value.

Allowed values: 0x0-0xfff

SR

Status register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-only

3/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
													WVU r	RVU r	PVU r

Toggle fields

PVU

Bit 0: Watchdog prescaler value update.

RVU

Bit 1: Watchdog counter reload value update.

WVU

Bit 2: Watchdog counter window value update.

WINR

Window register

Offset: 0x10, size: 32, reset: 0x00000FFF, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				WIN rw

Toggle fields

WIN

Bits 0-11: Watchdog counter window value.

Allowed values: 0x0-0xfff

LCD

0x40002400: Liquid crystal display controller

5/32 fields covered.

Toggle register map

Offset	Name	31	25	21	17	15	12	9	8	7	6	5	4	3	2	1	0
0x0	CR								BUFEN	MUX_SEG	BIAS		DUTY			VSEL	LCDEN
0x4	FCR		PS	DIV	BLINK	BLINKF	CC	DEAD			PON			UDDIE		SOFIE	HD
0x8	SR											FCRSF	RDY	UDD	UDR	SOF	ENS
0xc	CLR													UDDC		SOFC
0x14 (64-bit)	RAM_COM[0]	SEGS				SEGS
0x1c (64-bit)	RAM_COM[1]	SEGS				SEGS
0x24 (64-bit)	RAM_COM[2]	SEGS				SEGS
0x2c (64-bit)	RAM_COM[3]	SEGS				SEGS
0x34 (64-bit)	RAM_COM[4]	SEGS				SEGS
0x3c (64-bit)	RAM_COM[5]	SEGS				SEGS
0x44 (64-bit)	RAM_COM[6]	SEGS				SEGS
0x4c (64-bit)	RAM_COM[7]	SEGS				SEGS

Toggle registers

CR

control register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/6 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							BUFEN rw	MUX_SEG rw	BIAS rw		DUTY rw			VSEL rw	LCDEN rw

Toggle fields

LCDEN

Bit 0: LCD controller enable.

VSEL

Bit 1: Voltage source selection.

DUTY

Bits 2-4: Duty selection.

BIAS

Bits 5-6: Bias selector.

MUX_SEG

Bit 7: Mux segment enable.

BUFEN

Bit 8: Voltage output buffer enable.

FCR

frame control register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

0/10 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
						PS rw				DIV rw				BLINK rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BLINKF rw			CC rw			DEAD rw			PON rw			UDDIE rw		SOFIE rw	HD rw

Toggle fields

HD

Bit 0: High drive enable.

SOFIE

Bit 1: Start of frame interrupt enable.

UDDIE

Bit 3: Update display done interrupt enable.

PON

Bits 4-6: Pulse ON duration.

DEAD

Bits 7-9: Dead time duration.

CC

Bits 10-12: Contrast control.

BLINKF

Bits 13-15: Blink frequency selection.

BLINK

Bits 16-17: Blink mode selection.

DIV

Bits 18-21: DIV clock divider.

PS

Bits 22-25: PS 16-bit prescaler.

SR

status register

Offset: 0x8, size: 32, reset: 0x00000020, access: Unspecified

5/6 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
										FCRSF r	RDY r	UDD r	UDR w	SOF r	ENS r

Toggle fields

ENS

Bit 0: ENS.

SOF

Bit 1: Start of frame flag.

UDR

Bit 2: Update display request.

UDD

Bit 3: Update Display Done.

RDY

Bit 4: Ready flag.

FCRSF

Bit 5: LCD Frame Control Register Synchronization flag.

CLR

clear register

Offset: 0xc, size: 32, reset: 0x00000000, access: write-only

0/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
												UDDC w		SOFC w

Toggle fields

SOFC

Bit 1: Start of frame flag clear.

UDDC

Bit 3: Update display done clear.

RAM_COM[0]

display memory

Offset: 0x14, size: 64, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
SEGS rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SEGS rw

Toggle fields

SEGS

Bits 0-39: Segment states, one bit per segment, LSB: S00, MSB: S39.

RAM_COM[1]

display memory

Offset: 0x1c, size: 64, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
SEGS rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SEGS rw

Toggle fields

SEGS

Bits 0-39: Segment states, one bit per segment, LSB: S00, MSB: S39.

RAM_COM[2]

display memory

Offset: 0x24, size: 64, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
SEGS rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SEGS rw

Toggle fields

SEGS

Bits 0-39: Segment states, one bit per segment, LSB: S00, MSB: S39.

RAM_COM[3]

display memory

Offset: 0x2c, size: 64, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
SEGS rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SEGS rw

Toggle fields

SEGS

Bits 0-39: Segment states, one bit per segment, LSB: S00, MSB: S39.

RAM_COM[4]

display memory

Offset: 0x34, size: 64, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
SEGS rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SEGS rw

Toggle fields

SEGS

Bits 0-39: Segment states, one bit per segment, LSB: S00, MSB: S39.

RAM_COM[5]

display memory

Offset: 0x3c, size: 64, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
SEGS rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SEGS rw

Toggle fields

SEGS

Bits 0-39: Segment states, one bit per segment, LSB: S00, MSB: S39.

RAM_COM[6]

display memory

Offset: 0x44, size: 64, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
SEGS rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SEGS rw

Toggle fields

SEGS

Bits 0-39: Segment states, one bit per segment, LSB: S00, MSB: S39.

RAM_COM[7]

display memory

Offset: 0x4c, size: 64, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
SEGS rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SEGS rw

Toggle fields

SEGS

Bits 0-39: Segment states, one bit per segment, LSB: S00, MSB: S39.

LPTIM1

0x40007c00: Low power timer

8/40 fields covered.

Toggle register map

Offset	Name	24	23	22	21	20	19	18	15	11	7	6	5	4	3	2	1	0
0x0	ISR											DOWN	UP	ARROK	CMPOK	EXTTRIG	ARRM	CMPM
0x4	ICR											DOWNCF	UPCF	ARROKCF	CMPOKCF	EXTTRIGCF	ARRMCF	CMPMCF
0x8	IER											DOWNIE	UPIE	ARROKIE	CMPOKIE	EXTTRIGIE	ARRMIE	CMPMIE
0xc	CFGR	ENC	COUNTMODE	PRELOAD	WAVPOL	WAVE	TIMOUT	TRIGEN	TRIGSEL	PRESC	TRGFLT			CKFLT		CKPOL		CKSEL
0x10	CR															CNTSTRT	SNGSTRT	ENABLE
0x14	CMP								CMP
0x18	ARR								ARR
0x1c	CNT								CNT

Toggle registers

ISR

Interrupt and Status Register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-only

7/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									DOWN r	UP r	ARROK r	CMPOK r	EXTTRIG r	ARRM r	CMPM r

Toggle fields

CMPM

Bit 0: Compare match.

ARRM

Bit 1: Autoreload match.

EXTTRIG

Bit 2: External trigger edge event.

CMPOK

Bit 3: Compare register update OK.

ARROK

Bit 4: Autoreload register update OK.

UP

Bit 5: Counter direction change down to up.

DOWN

Bit 6: Counter direction change up to down.

ICR

Interrupt Clear Register

Offset: 0x4, size: 32, reset: 0x00000000, access: write-only

0/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									DOWNCF w	UPCF w	ARROKCF w	CMPOKCF w	EXTTRIGCF w	ARRMCF w	CMPMCF w

Toggle fields

CMPMCF

Bit 0: compare match Clear Flag.

ARRMCF

Bit 1: Autoreload match Clear Flag.

EXTTRIGCF

Bit 2: External trigger valid edge Clear Flag.

CMPOKCF

Bit 3: Compare register update OK Clear Flag.

ARROKCF

Bit 4: Autoreload register update OK Clear Flag.

UPCF

Bit 5: Direction change to UP Clear Flag.

DOWNCF

Bit 6: Direction change to down Clear Flag.

IER

Interrupt Enable Register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									DOWNIE rw	UPIE rw	ARROKIE rw	CMPOKIE rw	EXTTRIGIE rw	ARRMIE rw	CMPMIE rw

Toggle fields

CMPMIE

Bit 0: Compare match Interrupt Enable.

ARRMIE

Bit 1: Autoreload match Interrupt Enable.

EXTTRIGIE

Bit 2: External trigger valid edge Interrupt Enable.

CMPOKIE

Bit 3: Compare register update OK Interrupt Enable.

ARROKIE

Bit 4: Autoreload register update OK Interrupt Enable.

UPIE

Bit 5: Direction change to UP Interrupt Enable.

DOWNIE

Bit 6: Direction change to down Interrupt Enable.

CFGR

Configuration Register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

0/13 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
							ENC rw	COUNTMODE rw	PRELOAD rw	WAVPOL rw	WAVE rw	TIMOUT rw	TRIGEN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
TRIGSEL rw				PRESC rw				TRGFLT rw			CKFLT rw		CKPOL rw		CKSEL rw

Toggle fields

CKSEL

Bit 0: Clock selector.

CKPOL

Bits 1-2: Clock Polarity.

CKFLT

Bits 3-4: Configurable digital filter for external clock.

TRGFLT

Bits 6-7: Configurable digital filter for trigger.

PRESC

Bits 9-11: Clock prescaler.

TRIGSEL

Bits 13-15: Trigger selector.

TRIGEN

Bits 17-18: Trigger enable and polarity.

TIMOUT

Bit 19: Timeout enable.

WAVE

Bit 20: Waveform shape.

WAVPOL

Bit 21: Waveform shape polarity.

PRELOAD

Bit 22: Registers update mode.

COUNTMODE

Bit 23: counter mode enabled.

ENC

Bit 24: Encoder mode enable.

CR

Control Register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
													CNTSTRT rw	SNGSTRT rw	ENABLE rw

Toggle fields

ENABLE

Bit 0: LPTIM Enable.

SNGSTRT

Bit 1: LPTIM start in single mode.

CNTSTRT

Bit 2: Timer start in continuous mode.

CMP

Compare Register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CMP rw

Toggle fields

CMP

Bits 0-15: Compare value.

ARR

Autoreload Register

Offset: 0x18, size: 32, reset: 0x00000001, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ARR rw

Toggle fields

ARR

Bits 0-15: Auto reload value.

CNT

Counter Register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CNT r

Toggle fields

CNT

Bits 0-15: Counter value.

LPTIM2

0x40009400: Low power timer

8/40 fields covered.

Toggle register map

Offset	Name	24	23	22	21	20	19	18	15	11	7	6	5	4	3	2	1	0
0x0	ISR											DOWN	UP	ARROK	CMPOK	EXTTRIG	ARRM	CMPM
0x4	ICR											DOWNCF	UPCF	ARROKCF	CMPOKCF	EXTTRIGCF	ARRMCF	CMPMCF
0x8	IER											DOWNIE	UPIE	ARROKIE	CMPOKIE	EXTTRIGIE	ARRMIE	CMPMIE
0xc	CFGR	ENC	COUNTMODE	PRELOAD	WAVPOL	WAVE	TIMOUT	TRIGEN	TRIGSEL	PRESC	TRGFLT			CKFLT		CKPOL		CKSEL
0x10	CR															CNTSTRT	SNGSTRT	ENABLE
0x14	CMP								CMP
0x18	ARR								ARR
0x1c	CNT								CNT

Toggle registers

ISR

Interrupt and Status Register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-only

7/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									DOWN r	UP r	ARROK r	CMPOK r	EXTTRIG r	ARRM r	CMPM r

Toggle fields

CMPM

Bit 0: Compare match.

ARRM

Bit 1: Autoreload match.

EXTTRIG

Bit 2: External trigger edge event.

CMPOK

Bit 3: Compare register update OK.

ARROK

Bit 4: Autoreload register update OK.

UP

Bit 5: Counter direction change down to up.

DOWN

Bit 6: Counter direction change up to down.

ICR

Interrupt Clear Register

Offset: 0x4, size: 32, reset: 0x00000000, access: write-only

0/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									DOWNCF w	UPCF w	ARROKCF w	CMPOKCF w	EXTTRIGCF w	ARRMCF w	CMPMCF w

Toggle fields

CMPMCF

Bit 0: compare match Clear Flag.

ARRMCF

Bit 1: Autoreload match Clear Flag.

EXTTRIGCF

Bit 2: External trigger valid edge Clear Flag.

CMPOKCF

Bit 3: Compare register update OK Clear Flag.

ARROKCF

Bit 4: Autoreload register update OK Clear Flag.

UPCF

Bit 5: Direction change to UP Clear Flag.

DOWNCF

Bit 6: Direction change to down Clear Flag.

IER

Interrupt Enable Register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									DOWNIE rw	UPIE rw	ARROKIE rw	CMPOKIE rw	EXTTRIGIE rw	ARRMIE rw	CMPMIE rw

Toggle fields

CMPMIE

Bit 0: Compare match Interrupt Enable.

ARRMIE

Bit 1: Autoreload match Interrupt Enable.

EXTTRIGIE

Bit 2: External trigger valid edge Interrupt Enable.

CMPOKIE

Bit 3: Compare register update OK Interrupt Enable.

ARROKIE

Bit 4: Autoreload register update OK Interrupt Enable.

UPIE

Bit 5: Direction change to UP Interrupt Enable.

DOWNIE

Bit 6: Direction change to down Interrupt Enable.

CFGR

Configuration Register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

0/13 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
							ENC rw	COUNTMODE rw	PRELOAD rw	WAVPOL rw	WAVE rw	TIMOUT rw	TRIGEN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
TRIGSEL rw				PRESC rw				TRGFLT rw			CKFLT rw		CKPOL rw		CKSEL rw

Toggle fields

CKSEL

Bit 0: Clock selector.

CKPOL

Bits 1-2: Clock Polarity.

CKFLT

Bits 3-4: Configurable digital filter for external clock.

TRGFLT

Bits 6-7: Configurable digital filter for trigger.

PRESC

Bits 9-11: Clock prescaler.

TRIGSEL

Bits 13-15: Trigger selector.

TRIGEN

Bits 17-18: Trigger enable and polarity.

TIMOUT

Bit 19: Timeout enable.

WAVE

Bit 20: Waveform shape.

WAVPOL

Bit 21: Waveform shape polarity.

PRELOAD

Bit 22: Registers update mode.

COUNTMODE

Bit 23: counter mode enabled.

ENC

Bit 24: Encoder mode enable.

CR

Control Register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
													CNTSTRT rw	SNGSTRT rw	ENABLE rw

Toggle fields

ENABLE

Bit 0: LPTIM Enable.

SNGSTRT

Bit 1: LPTIM start in single mode.

CNTSTRT

Bit 2: Timer start in continuous mode.

CMP

Compare Register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CMP rw

Toggle fields

CMP

Bits 0-15: Compare value.

ARR

Autoreload Register

Offset: 0x18, size: 32, reset: 0x00000001, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ARR rw

Toggle fields

ARR

Bits 0-15: Auto reload value.

CNT

Counter Register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CNT r

Toggle fields

CNT

Bits 0-15: Counter value.

LPUART1

0x40008000: Universal synchronous asynchronous receiver transmitter

72/72 fields covered.

Toggle register map

Offset	Name	31	28	25	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	CR1		M1	DEAT			DEDT						CMIE	MME	M0	WAKE	PCE	PS	PEIE	TXEIE	TCIE	RXNEIE	IDLEIE	TE	RE	UESM	UE
0x4	CR2	ADD						MSBFIRST	DATAINV	TXINV	RXINV	SWAP		STOP		CLKEN							ADDM7
0x8	CR3				WUFIE	WUS						DEP	DEM	DDRE	OVRDIS		CTSIE	CTSE	RTSE	DMAT	DMAR			HDSEL			EIE
0xc	BRR							BRR				BRR
0x18	RQR																							RXFRQ	MMRQ	SBKRQ
0x1c	ISR				REACK	TEACK	WUF	RWU	SBKF	CMF	BUSY						CTS	CTSIF		TXE	TC	RXNE	IDLE	ORE	NF	FE	PE
0x20	ICR						WUCF			CMCF								CTSCF			TCCF		IDLECF	ORECF	NCF	FECF	PECF
0x24	RDR																		RDR
0x28	TDR																		TDR

Toggle registers

CR1

Control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

18/18 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
			M1 rw			DEAT rw					DEDT rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	CMIE rw	MME rw	M0 rw	WAKE rw	PCE rw	PS rw	PEIE rw	TXEIE rw	TCIE rw	RXNEIE rw	IDLEIE rw	TE rw	RE rw	UESM rw	UE rw

Toggle fields

UE

Bit 0: USART enable.

Allowed values:
0: Disabled: UART is disabled
1: Enabled: UART is enabled

UESM

Bit 1: USART enable in Stop mode.

Allowed values:
0: Disabled: USART not able to wake up the MCU from Stop mode
1: Enabled: USART able to wake up the MCU from Stop mode

RE

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver is disabled
1: Enabled: Receiver is enabled

TE

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter is disabled
1: Enabled: Transmitter is enabled

IDLEIE

Bit 4: IDLE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever IDLE=1 in the ISR register

RXNEIE

Bit 5: RXNE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever ORE=1 or RXNE=1 in the ISR register

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TC=1 in the ISR register

TXEIE

Bit 7: interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TXE=1 in the ISR register

PEIE

Bit 8: PE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever PE=1 in the ISR register

PS

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCE

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WAKE

Bit 11: Receiver wakeup method.

Allowed values:
0: Idle: Idle line
1: Address: Address mask

M0

Bit 12: Word length.

Allowed values:
0: Bit8: 1 start bit, 8 data bits, n stop bits
1: Bit9: 1 start bit, 9 data bits, n stop bits

MME

Bit 13: Mute mode enable.

Allowed values:
0: Disabled: Receiver in active mode permanently
1: Enabled: Receiver can switch between mute mode and active mode

CMIE

Bit 14: Character match interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated when the CMF bit is set in the ISR register

DEDT

Bits 16-20: Driver Enable de-assertion time.

Allowed values: 0x0-0x1f

DEAT

Bits 21-25: Driver Enable assertion time.

Allowed values: 0x0-0x1f

M1

Bit 28: Word length.

Allowed values:
0: M0: Use M0 to set the data bits
1: Bit7: 1 start bit, 7 data bits, n stop bits

CR2

Control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

9/9 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
ADD rw												MSBFIRST rw	DATAINV rw	TXINV rw	RXINV rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SWAP rw		STOP rw		CLKEN rw							ADDM7 rw

Toggle fields

ADDM7

Bit 4: 7-bit Address Detection/4-bit Address Detection.

Allowed values:
0: Bit4: 4-bit address detection
1: Bit7: 7-bit address detection

CLKEN

Bit 11: Clock enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STOP

Bits 12-13: STOP bits.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bit
2: Stop2: 2 stop bit
3: Stop1p5: 1.5 stop bit

SWAP

Bit 15: Swap TX/RX pins.

Allowed values:
0: Standard: TX/RX pins are used as defined in standard pinout
1: Swapped: The TX and RX pins functions are swapped

RXINV

Bit 16: RX pin active level inversion.

Allowed values:
0: Standard: RX pin signal works using the standard logic levels
1: Inverted: RX pin signal values are inverted

TXINV

Bit 17: TX pin active level inversion.

Allowed values:
0: Standard: TX pin signal works using the standard logic levels
1: Inverted: TX pin signal values are inverted

DATAINV

Bit 18: Binary data inversion.

Allowed values:
0: Positive: Logical data from the data register are send/received in positive/direct logic
1: Negative: Logical data from the data register are send/received in negative/inverse logic

MSBFIRST

Bit 19: Most significant bit first.

Allowed values:
0: LSB: data is transmitted/received with data bit 0 first, following the start bit
1: MSB: data is transmitted/received with MSB (bit 7/8/9) first, following the start bit

ADD

Bits 24-31: Address of the USART node.

Allowed values: 0x0-0xff

CR3

Control register 3

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

13/13 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
									WUFIE rw	WUS rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DEP rw	DEM rw	DDRE rw	OVRDIS rw		CTSIE rw	CTSE rw	RTSE rw	DMAT rw	DMAR rw			HDSEL rw			EIE rw

Toggle fields

EIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the ISR register

HDSEL

Bit 3: Half-duplex selection.

Allowed values:
0: NotSelected: Half duplex mode is not selected
1: Selected: Half duplex mode is selected

DMAR

Bit 6: DMA enable receiver.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DMAT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSE

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS output enabled, data is only requested when there is space in the receive buffer

CTSE

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS mode enabled, data is only transmitted when the CTS input is asserted

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever CTSIF=1 in the ISR register

OVRDIS

Bit 12: Overrun Disable.

Allowed values:
0: Enabled: Overrun Error Flag, ORE, is set when received data is not read before receiving new data
1: Disabled: Overrun functionality is disabled. If new data is received while the RXNE flag is still set the ORE flag is not set and the new received data overwrites the previous content of the RDR register

DDRE

Bit 13: DMA Disable on Reception Error.

Allowed values:
0: NotDisabled: DMA is not disabled in case of reception error
1: Disabled: DMA is disabled following a reception error

DEM

Bit 14: Driver enable mode.

Allowed values:
0: Disabled: DE function is disabled
1: Enabled: The DE signal is output on the RTS pin

DEP

Bit 15: Driver enable polarity selection.

Allowed values:
0: High: DE signal is active high
1: Low: DE signal is active low

WUS

Bits 20-21: Wakeup from Stop mode interrupt flag selection.

Allowed values:
0: Address: WUF active on address match
2: Start: WuF active on Start bit detection
3: RXNE: WUF active on RXNE

WUFIE

Bit 22: Wakeup from Stop mode interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated whenever WUF=1 in the ISR register

BRR

Baud rate register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
												BRR rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BRR rw

Toggle fields

BRR

Bits 0-19: BRR.

Allowed values: 0x0-0xfffff

RQR

Request register

Offset: 0x18, size: 32, reset: 0x00000000, access: write-only

3/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
												RXFRQ w	MMRQ w	SBKRQ w

Toggle fields

SBKRQ

Bit 1: Send break request.

Allowed values:
1: Break: sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available

MMRQ

Bit 2: Mute mode request.

Allowed values:
1: Mute: Puts the USART in mute mode and sets the RWU flag

RXFRQ

Bit 3: Receive data flush request.

Allowed values:
1: Discard: clears the RXNE flag. This allows to discard the received data without reading it, and avoid an overrun condition

ISR

Interrupt & status register

Offset: 0x1c, size: 32, reset: 0x000000C0, access: read-only

17/17 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
									REACK r	TEACK r	WUF r	RWU r	SBKF r	CMF r	BUSY r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
					CTS r	CTSIF r		TXE r	TC r	RXNE r	IDLE r	ORE r	NF r	FE r	PE r

Toggle fields

PE

Bit 0: PE.

FE

Bit 1: FE.

NF

Bit 2: NF.

ORE

Bit 3: ORE.

IDLE

Bit 4: IDLE.

RXNE

Bit 5: RXNE.

TC

Bit 6: TC.

TXE

Bit 7: TXE.

CTSIF

Bit 9: CTSIF.

CTS

Bit 10: CTS.

BUSY

Bit 16: BUSY.

CMF

Bit 17: CMF.

SBKF

Bit 18: SBKF.

RWU

Bit 19: RWU.

WUF

Bit 20: WUF.

TEACK

Bit 21: TEACK.

REACK

Bit 22: REACK.

ICR

Interrupt flag clear register

Offset: 0x20, size: 32, reset: 0x00000000, access: write-only

9/9 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
											WUCF w			CMCF w
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
						CTSCF w			TCCF w		IDLECF w	ORECF w	NCF w	FECF w	PECF w

Toggle fields

PECF

Bit 0: Parity error clear flag.

Allowed values:
1: Clear: Clears the PE flag in the ISR register

FECF

Bit 1: Framing error clear flag.

Allowed values:
1: Clear: Clears the FE flag in the ISR register

NCF

Bit 2: Noise detected clear flag.

Allowed values:
1: Clear: Clears the NF flag in the ISR register

ORECF

Bit 3: Overrun error clear flag.

Allowed values:
1: Clear: Clears the ORE flag in the ISR register

IDLECF

Bit 4: Idle line detected clear flag.

Allowed values:
1: Clear: Clears the IDLE flag in the ISR register

TCCF

Bit 6: Transmission complete clear flag.

Allowed values:
1: Clear: Clears the TC flag in the ISR register

CTSCF

Bit 9: CTS clear flag.

Allowed values:
1: Clear: Clears the CTSIF flag in the ISR register

CMCF

Bit 17: Character match clear flag.

Allowed values:
1: Clear: Clears the CMF flag in the ISR register

WUCF

Bit 20: Wakeup from Stop mode clear flag.

Allowed values:
1: Clear: Clears the WUF flag in the ISR register

RDR

Receive data register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							RDR r

Toggle fields

RDR

Bits 0-8: Receive data value.

Allowed values: 0x0-0x1ff

TDR

Transmit data register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							TDR rw

Toggle fields

TDR

Bits 0-8: Transmit data value.

Allowed values: 0x0-0x1ff

MPU

0xe000ed90: Memory protection unit

6/19 fields covered.

Toggle register map

Offset	Name	31	28	26	23	21	18	17	16	15	7	5	4	3	2	1	0
0x0	TYPER				IREGION					DREGION							SEPARATE
0x4	CTRL														PRIVDEFENA	HFNMIENA	ENABLE
0x8	RNR										REGION
0xc	RBAR	ADDR								ADDR			VALID	REGION
0x10	RASR		XN	AP		TEX	S	C	B	SRD		SIZE					ENABLE

Toggle registers

TYPER

MPU type register

Offset: 0x0, size: 32, reset: 0x00000800, access: read-only

3/3 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								IREGION r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DREGION r															SEPARATE r

Toggle fields

SEPARATE

Bit 0: Separate flag.

DREGION

Bits 8-15: Number of MPU data regions.

IREGION

Bits 16-23: Number of MPU instruction regions.

CTRL

MPU control register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-only

3/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
													PRIVDEFENA r	HFNMIENA r	ENABLE r

Toggle fields

ENABLE

Bit 0: Enables the MPU.

HFNMIENA

Bit 1: Enables the operation of MPU during hard fault.

PRIVDEFENA

Bit 2: Enable priviliged software access to default memory map.

RNR

MPU region number register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								REGION rw

Toggle fields

REGION

Bits 0-7: MPU region.

RBAR

MPU region base address register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
ADDR rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ADDR rw											VALID rw	REGION rw

Toggle fields

REGION

Bits 0-3: MPU region field.

VALID

Bit 4: MPU region number valid.

ADDR

Bits 5-31: Region base address field.

RASR

MPU region attribute and size register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

0/9 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
			XN rw		AP rw					TEX rw			S rw	C rw	B rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SRD rw										SIZE rw					ENABLE rw

Toggle fields

ENABLE

Bit 0: Region enable bit..

SIZE

Bits 1-5: Size of the MPU protection region.

SRD

Bits 8-15: Subregion disable bits.

B

Bit 16: memory attribute.

C

Bit 17: memory attribute.

S

Bit 18: Shareable memory attribute.

TEX

Bits 19-21: memory attribute.

AP

Bits 24-26: Access permission.

XN

Bit 28: Instruction access disable bit.

NVIC

0xe000e100: Nested Vectored Interrupt Controller

3/99 fields covered.

Toggle register map

Offset	Name	31	23	15	7
0x0	ISER0	SETENA		SETENA
0x4	ISER1	SETENA		SETENA
0x8	ISER2	SETENA		SETENA
0x80	ICER0	CLRENA		CLRENA
0x84	ICER1	CLRENA		CLRENA
0x88	ICER2	CLRENA		CLRENA
0x100	ISPR0	SETPEND		SETPEND
0x104	ISPR1	SETPEND		SETPEND
0x108	ISPR2	SETPEND		SETPEND
0x180	ICPR0	CLRPEND		CLRPEND
0x184	ICPR1	CLRPEND		CLRPEND
0x188	ICPR2	CLRPEND		CLRPEND
0x200	IABR0	ACTIVE		ACTIVE
0x204	IABR1	ACTIVE		ACTIVE
0x208	IABR2	ACTIVE		ACTIVE
0x300	IPR0	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x304	IPR1	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x308	IPR2	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x30c	IPR3	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x310	IPR4	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x314	IPR5	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x318	IPR6	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x31c	IPR7	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x320	IPR8	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x324	IPR9	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x328	IPR10	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x32c	IPR11	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x330	IPR12	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x334	IPR13	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x338	IPR14	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x33c	IPR15	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x340	IPR16	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x344	IPR17	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x348	IPR18	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x34c	IPR19	IPR_N3	IPR_N2	IPR_N1	IPR_N0
0x350	IPR20	IPR_N3	IPR_N2	IPR_N1	IPR_N0

Toggle registers

ISER0

Interrupt Set-Enable Register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
SETENA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SETENA rw

Toggle fields

SETENA

Bits 0-31: SETENA.

ISER1

Interrupt Set-Enable Register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
SETENA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SETENA rw

Toggle fields

SETENA

Bits 0-31: SETENA.

ISER2

Interrupt Set-Enable Register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
SETENA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SETENA rw

Toggle fields

SETENA

Bits 0-31: SETENA.

ICER0

Interrupt Clear-Enable Register

Offset: 0x80, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
CLRENA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CLRENA rw

Toggle fields

CLRENA

Bits 0-31: CLRENA.

ICER1

Interrupt Clear-Enable Register

Offset: 0x84, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
CLRENA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CLRENA rw

Toggle fields

CLRENA

Bits 0-31: CLRENA.

ICER2

Interrupt Clear-Enable Register

Offset: 0x88, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
CLRENA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CLRENA rw

Toggle fields

CLRENA

Bits 0-31: CLRENA.

ISPR0

Interrupt Set-Pending Register

Offset: 0x100, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
SETPEND rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SETPEND rw

Toggle fields

SETPEND

Bits 0-31: SETPEND.

ISPR1

Interrupt Set-Pending Register

Offset: 0x104, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
SETPEND rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SETPEND rw

Toggle fields

SETPEND

Bits 0-31: SETPEND.

ISPR2

Interrupt Set-Pending Register

Offset: 0x108, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
SETPEND rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SETPEND rw

Toggle fields

SETPEND

Bits 0-31: SETPEND.

ICPR0

Interrupt Clear-Pending Register

Offset: 0x180, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
CLRPEND rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CLRPEND rw

Toggle fields

CLRPEND

Bits 0-31: CLRPEND.

ICPR1

Interrupt Clear-Pending Register

Offset: 0x184, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
CLRPEND rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CLRPEND rw

Toggle fields

CLRPEND

Bits 0-31: CLRPEND.

ICPR2

Interrupt Clear-Pending Register

Offset: 0x188, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
CLRPEND rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CLRPEND rw

Toggle fields

CLRPEND

Bits 0-31: CLRPEND.

IABR0

Interrupt Active Bit Register

Offset: 0x200, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
ACTIVE r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ACTIVE r

Toggle fields

ACTIVE

Bits 0-31: ACTIVE.

IABR1

Interrupt Active Bit Register

Offset: 0x204, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
ACTIVE r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ACTIVE r

Toggle fields

ACTIVE

Bits 0-31: ACTIVE.

IABR2

Interrupt Active Bit Register

Offset: 0x208, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
ACTIVE r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ACTIVE r

Toggle fields

ACTIVE

Bits 0-31: ACTIVE.

IPR0

Interrupt Priority Register

Offset: 0x300, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR1

Interrupt Priority Register

Offset: 0x304, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR2

Interrupt Priority Register

Offset: 0x308, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR3

Interrupt Priority Register

Offset: 0x30c, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR4

Interrupt Priority Register

Offset: 0x310, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR5

Interrupt Priority Register

Offset: 0x314, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR6

Interrupt Priority Register

Offset: 0x318, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR7

Interrupt Priority Register

Offset: 0x31c, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR8

Interrupt Priority Register

Offset: 0x320, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR9

Interrupt Priority Register

Offset: 0x324, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR10

Interrupt Priority Register

Offset: 0x328, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR11

Interrupt Priority Register

Offset: 0x32c, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR12

Interrupt Priority Register

Offset: 0x330, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR13

Interrupt Priority Register

Offset: 0x334, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR14

Interrupt Priority Register

Offset: 0x338, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR15

Interrupt Priority Register

Offset: 0x33c, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR16

Interrupt Priority Register

Offset: 0x340, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR17

Interrupt Priority Register

Offset: 0x344, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR18

Interrupt Priority Register

Offset: 0x348, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR19

Interrupt Priority Register

Offset: 0x34c, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

IPR20

Interrupt Priority Register

Offset: 0x350, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IPR_N3 rw								IPR_N2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IPR_N1 rw								IPR_N0 rw

Toggle fields

IPR_N0

Bits 0-7: IPR_N0.

IPR_N1

Bits 8-15: IPR_N1.

IPR_N2

Bits 16-23: IPR_N2.

IPR_N3

Bits 24-31: IPR_N3.

NVIC_STIR

0xe000ef00: Nested vectored interrupt controller

0/1 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	STIR																								INTID

Toggle registers

STIR

Software trigger interrupt register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							INTID rw

Toggle fields

INTID

Bits 0-8: Software generated interrupt ID.

OPAMP

0x40007800: Operational amplifiers

29/29 fields covered.

Toggle register map

Offset	Name	31	15	14	13	12	10	9	5	4	3	1	0
0x0	OPAMP1_CSR	OPA_RANGE	CALOUT	USERTRIM	CALSEL	CALON	VP_SEL	VM_SEL	PGA_GAIN		OPAMODE	OPALPM	OPAEN
0x4	OPAMP1_OTR					TRIMOFFSETP				TRIMOFFSETN
0x8	OPAMP1_LPOTR					TRIMLPOFFSETP				TRIMLPOFFSETN
0x10	OPAMP2_CSR		CALOUT	USERTRIM	CALSEL	CALON	VP_SEL	VM_SEL	PGA_GAIN		OPAMODE	OPALPM	OPAEN
0x14	OPAMP2_OTR					TRIMOFFSETP				TRIMOFFSETN
0x18	OPAMP2_LPOTR					TRIMLPOFFSETP				TRIMLPOFFSETN

Toggle registers

OPAMP1_CSR

OPAMP1 control/status register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

11/11 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
OPA_RANGE rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CALOUT rw	USERTRIM rw	CALSEL rw	CALON rw		VP_SEL rw	VM_SEL rw				PGA_GAIN rw		OPAMODE rw		OPALPM rw	OPAEN rw

Toggle fields

OPAEN

Bit 0: Operational amplifier Enable.

Allowed values:
0: Disabled: OpAmp disabled
1: Enabled: OpAmp enabled

OPALPM

Bit 1: Operational amplifier Low Power Mode.

Allowed values:
0: NORMAL: OpAmp in normal mode
1: LOW: OpAmp in low power mode

OPAMODE

Bits 2-3: Operational amplifier PGA mode.

Allowed values:
0: PGA_DISABLED: internal PGA diabled
2: PGA_ENABLED: internal PGA enabled, gain programmed in PGA_GAIN
3: FOLLOWER: internal follower

PGA_GAIN

Bits 4-5: Operational amplifier Programmable amplifier gain value.

Allowed values:
0: Gain2: Gain 2
1: Gain4: Gain 4
2: Gain8: Gain 8
3: Gain16: Gain 16

VM_SEL

Bits 8-9: Inverting input selection.

Allowed values:
0: GPIO: GPIO connectet to VINM
1: LOW_LEAKAGE: Low leakage inputs connecte (only available in certen BGA cases
2: PGA_MODE: OPAMP in PGA mode

VP_SEL

Bit 10: Non inverted input selection.

Allowed values:
0: GPIO: GPIO connectet to VINP
1: DAC: DAC connected to VPINP

CALON

Bit 12: Calibration mode enabled.

Allowed values:
0: Disabled: Normal mode
1: Enabled: Calibration mode

CALSEL

Bit 13: Calibration selection.

Allowed values:
0: NMOS: 0.2V applied to OPAMP inputs during calibration
1: PMOS: VDDA-0.2V applied to OPAMP inputs during calibration"

USERTRIM

Bit 14: allows to switch from ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â¹ÃƒÆ’Ã¢â‚¬Â¦ÃƒÂ¢Ã¢â€šÂ¬Ã…â€œfactoryÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¾ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ AOP offset trimmed values to AOP offset ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â¹ÃƒÆ’Ã¢â‚¬Â¦ÃƒÂ¢Ã¢â€šÂ¬Ã…â€œuserÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¾ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢.

Allowed values:
0: Factory: Factory trim used
1: User: User trim used

CALOUT

Bit 15: Operational amplifier calibration output.

Allowed values: 0x0-0x1

OPA_RANGE

Bit 31: Operational amplifier power supply range for stability.

Allowed values:
0: LOW: low range (VDDA < 2.4V
1: HIGH: low range (VDDA >2.4V

OPAMP1_OTR

OPAMP1 offset trimming register in normal mode

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			TRIMOFFSETP rw								TRIMOFFSETN rw

Toggle fields

TRIMOFFSETN

Bits 0-4: Trim for NMOS differential pairs.

Allowed values: 0x0-0x1f

TRIMOFFSETP

Bits 8-12: Trim for PMOS differential pairs.

Allowed values: 0x0-0x1f

OPAMP1_LPOTR

OPAMP1 offset trimming register in low-power mode

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			TRIMLPOFFSETP rw								TRIMLPOFFSETN rw

Toggle fields

TRIMLPOFFSETN

Bits 0-4: Trim for NMOS differential pairs.

Allowed values: 0x0-0x1f

TRIMLPOFFSETP

Bits 8-12: Trim for PMOS differential pairs.

Allowed values: 0x0-0x1f

OPAMP2_CSR

OPAMP2 control/status register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

10/10 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CALOUT rw	USERTRIM rw	CALSEL rw	CALON rw		VP_SEL rw	VM_SEL rw				PGA_GAIN rw		OPAMODE rw		OPALPM rw	OPAEN rw

Toggle fields

OPAEN

Bit 0: Operational amplifier Enable.

Allowed values:
0: Disabled: OpAmp disabled
1: Enabled: OpAmp enabled

OPALPM

Bit 1: Operational amplifier Low Power Mode.

Allowed values:
0: NORMAL: OpAmp in normal mode
1: LOW: OpAmp in low power mode

OPAMODE

Bits 2-3: Operational amplifier PGA mode.

Allowed values:
0: PGA_DISABLED: internal PGA diabled
2: PGA_ENABLED: internal PGA enabled, gain programmed in PGA_GAIN
3: FOLLOWER: internal follower

PGA_GAIN

Bits 4-5: Operational amplifier Programmable amplifier gain value.

Allowed values:
0: Gain2: Gain 2
1: Gain4: Gain 4
2: Gain8: Gain 8
3: Gain16: Gain 16

VM_SEL

Bits 8-9: Inverting input selection.

Allowed values:
0: GPIO: GPIO connectet to VINM
1: LOW_LEAKAGE: Low leakage inputs connecte (only available in certen BGA cases
2: PGA_MODE: OPAMP in PGA mode

VP_SEL

Bit 10: Non inverted input selection.

Allowed values:
0: GPIO: GPIO connectet to VINP
1: DAC: DAC connected to VPINP

CALON

Bit 12: Calibration mode enabled.

Allowed values:
0: Disabled: Normal mode
1: Enabled: Calibration mode

CALSEL

Bit 13: Calibration selection.

Allowed values:
0: NMOS: 0.2V applied to OPAMP inputs during calibration
1: PMOS: VDDA-0.2V applied to OPAMP inputs during calibration"

USERTRIM

Bit 14: allows to switch from ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â¹ÃƒÆ’Ã¢â‚¬Â¦ÃƒÂ¢Ã¢â€šÂ¬Ã…â€œfactoryÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¾ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ AOP offset trimmed values to AOP offset ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â¹ÃƒÆ’Ã¢â‚¬Â¦ÃƒÂ¢Ã¢â€šÂ¬Ã…â€œuserÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¾ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢.

Allowed values:
0: Factory: Factory trim used
1: User: User trim used

CALOUT

Bit 15: Operational amplifier calibration output.

Allowed values: 0x0-0x1

OPAMP2_OTR

OPAMP2 offset trimming register in normal mode

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			TRIMOFFSETP rw								TRIMOFFSETN rw

Toggle fields

TRIMOFFSETN

Bits 0-4: Trim for NMOS differential pairs.

Allowed values: 0x0-0x1f

TRIMOFFSETP

Bits 8-12: Trim for PMOS differential pairs.

Allowed values: 0x0-0x1f

OPAMP2_LPOTR

OPAMP2 offset trimming register in low-power mode

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			TRIMLPOFFSETP rw								TRIMLPOFFSETN rw

Toggle fields

TRIMLPOFFSETN

Bits 0-4: Trim for NMOS differential pairs.

Allowed values: 0x0-0x1f

TRIMLPOFFSETP

Bits 8-12: Trim for PMOS differential pairs.

Allowed values: 0x0-0x1f

PWR

0x40007000: Power control

15/276 fields covered.

Toggle register map

Offset	Name	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	CR1		LPR				VOS		DBP						LPMS
0x4	CR2						USV	IOSV		PVME4	PVME3	PVME2	PVME1	PLS			PVDE
0x8	CR3	EWF					APC		RRS				EWUP5	EWUP4	EWUP3	EWUP2	EWUP1
0xc	CR4							VBRS	VBE				WP5	WP4	WP3	WP2	WP1
0x10	SR1	WUFI							CSBF				CWUF5	CWUF4	CWUF3	CWUF2	CWUF1
0x14	SR2	PVMO4	PVMO3	PVMO2	PVMO1	PVDO	VOSF	REGLPF	REGLPS
0x18	SCR								SBF				WUF5	WUF4	WUF3	WUF2	WUF1
0x20	PUCRA	PU15	PU14	PU13	PU12	PU11	PU10	PU9	PU8	PU7	PU6	PU5	PU4	PU3	PU2	PU1	PU0
0x24	PDCRA	PD15	PD14	PD13	PD12	PD11	PD10	PD9	PD8	PD7	PD6	PD5	PD4	PD3	PD2	PD1	PD0
0x28	PUCRB	PU15	PU14	PU13	PU12	PU11	PU10	PU9	PU8	PU7	PU6	PU5	PU4	PU3	PU2	PU1	PU0
0x2c	PDCRB	PD15	PD14	PD13	PD12	PD11	PD10	PD9	PD8	PD7	PD6	PD5	PD4	PD3	PD2	PD1	PD0
0x30	PUCRC	PU15	PU14	PU13	PU12	PU11	PU10	PU9	PU8	PU7	PU6	PU5	PU4	PU3	PU2	PU1	PU0
0x34	PDCRC	PD15	PD14	PD13	PD12	PD11	PD10	PD9	PD8	PD7	PD6	PD5	PD4	PD3	PD2	PD1	PD0
0x38	PUCRD	PU15	PU14	PU13	PU12	PU11	PU10	PU9	PU8	PU7	PU6	PU5	PU4	PU3	PU2	PU1	PU0
0x3c	PDCRD	PD15	PD14	PD13	PD12	PD11	PD10	PD9	PD8	PD7	PD6	PD5	PD4	PD3	PD2	PD1	PD0
0x40	PUCRE	PU15	PU14	PU13	PU12	PU11	PU10	PU9	PU8	PU7	PU6	PU5	PU4	PU3	PU2	PU1	PU0
0x44	PDCRE	PD15	PD14	PD13	PD12	PD11	PD10	PD9	PD8	PD7	PD6	PD5	PD4	PD3	PD2	PD1	PD0
0x48	PUCRF	PU15	PU14	PU13	PU12	PU11	PU10	PU9	PU8	PU7	PU6	PU5	PU4	PU3	PU2	PU1	PU0
0x4c	PDCRF	PD15	PD14	PD13	PD12	PD11	PD10	PD9	PD8	PD7	PD6	PD5	PD4	PD3	PD2	PD1	PD0
0x50	PUCRG	PU15	PU14	PU13	PU12	PU11	PU10	PU9	PU8	PU7	PU6	PU5	PU4	PU3	PU2	PU1	PU0
0x54	PDCRG	PD15	PD14	PD13	PD12	PD11	PD10	PD9	PD8	PD7	PD6	PD5	PD4	PD3	PD2	PD1	PD0
0x58	PUCRH															PU1	PU0
0x5c	PDCRH															PD1	PD0

Toggle registers

CR1

Power control register 1

Offset: 0x0, size: 32, reset: 0x00000200, access: read-write

0/4 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	LPR rw				VOS rw		DBP rw						LPMS rw

Toggle fields

LPMS

Bits 0-2: Low-power mode selection.

DBP

Bit 8: Disable backup domain write protection.

VOS

Bits 9-10: Voltage scaling range selection.

LPR

Bit 14: Low-power run.

CR2

Power control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

0/8 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
					USV rw	IOSV rw		PVME4 rw	PVME3 rw	PVME2 rw	PVME1 rw	PLS rw			PVDE rw

Toggle fields

PVDE

Bit 0: Power voltage detector enable.

PLS

Bits 1-3: Power voltage detector level selection.

PVME1

Bit 4: Peripheral voltage monitoring 1 enable: VDDUSB vs. 1.2V.

PVME2

Bit 5: Peripheral voltage monitoring 2 enable: VDDIO2 vs. 0.9V.

PVME3

Bit 6: Peripheral voltage monitoring 3 enable: VDDA vs. 1.62V.

PVME4

Bit 7: Peripheral voltage monitoring 4 enable: VDDA vs. 2.2V.

IOSV

Bit 9: VDDIO2 Independent I/Os supply valid.

USV

Bit 10: VDDUSB USB supply valid.

CR3

Power control register 3

Offset: 0x8, size: 32, reset: 0x00008000, access: read-write

0/8 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
EWF rw					APC rw		RRS rw				EWUP5 rw	EWUP4 rw	EWUP3 rw	EWUP2 rw	EWUP1 rw

Toggle fields

EWUP1

Bit 0: Enable Wakeup pin WKUP1.

EWUP2

Bit 1: Enable Wakeup pin WKUP2.

EWUP3

Bit 2: Enable Wakeup pin WKUP3.

EWUP4

Bit 3: Enable Wakeup pin WKUP4.

EWUP5

Bit 4: Enable Wakeup pin WKUP5.

RRS

Bit 8: SRAM2 retention in Standby mode.

APC

Bit 10: Apply pull-up and pull-down configuration.

EWF

Bit 15: Enable internal wakeup line.

CR4

Power control register 4

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

0/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
						VBRS rw	VBE rw				WP5 rw	WP4 rw	WP3 rw	WP2 rw	WP1 rw

Toggle fields

WP1

Bit 0: Wakeup pin WKUP1 polarity.

WP2

Bit 1: Wakeup pin WKUP2 polarity.

WP3

Bit 2: Wakeup pin WKUP3 polarity.

WP4

Bit 3: Wakeup pin WKUP4 polarity.

WP5

Bit 4: Wakeup pin WKUP5 polarity.

VBE

Bit 8: VBAT battery charging enable.

VBRS

Bit 9: VBAT battery charging resistor selection.

SR1

Power status register 1

Offset: 0x10, size: 32, reset: 0x00000000, access: read-only

7/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
WUFI r							CSBF r				CWUF5 r	CWUF4 r	CWUF3 r	CWUF2 r	CWUF1 r

Toggle fields

CWUF1

Bit 0: Wakeup flag 1.

CWUF2

Bit 1: Wakeup flag 2.

CWUF3

Bit 2: Wakeup flag 3.

CWUF4

Bit 3: Wakeup flag 4.

CWUF5

Bit 4: Wakeup flag 5.

CSBF

Bit 8: Standby flag.

WUFI

Bit 15: Wakeup flag internal.

SR2

Power status register 2

Offset: 0x14, size: 32, reset: 0x00000000, access: read-only

8/8 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PVMO4 r	PVMO3 r	PVMO2 r	PVMO1 r	PVDO r	VOSF r	REGLPF r	REGLPS r

Toggle fields

REGLPS

Bit 8: Low-power regulator started.

REGLPF

Bit 9: Low-power regulator flag.

VOSF

Bit 10: Voltage scaling flag.

PVDO

Bit 11: Power voltage detector output.

PVMO1

Bit 12: Peripheral voltage monitoring output: VDDUSB vs. 1.2 V.

PVMO2

Bit 13: Peripheral voltage monitoring output: VDDIO2 vs. 0.9 V.

PVMO3

Bit 14: Peripheral voltage monitoring output: VDDA vs. 1.62 V.

PVMO4

Bit 15: Peripheral voltage monitoring output: VDDA vs. 2.2 V.

SCR

Power status clear register

Offset: 0x18, size: 32, reset: 0x00000000, access: write-only

0/6 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							SBF w				WUF5 w	WUF4 w	WUF3 w	WUF2 w	WUF1 w

Toggle fields

WUF1

Bit 0: Clear wakeup flag 1.

WUF2

Bit 1: Clear wakeup flag 2.

WUF3

Bit 2: Clear wakeup flag 3.

WUF4

Bit 3: Clear wakeup flag 4.

WUF5

Bit 4: Clear wakeup flag 5.

SBF

Bit 8: Clear standby flag.

PUCRA

Power Port A pull-up control register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

0/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PU15 rw	PU14 rw	PU13 rw	PU12 rw	PU11 rw	PU10 rw	PU9 rw	PU8 rw	PU7 rw	PU6 rw	PU5 rw	PU4 rw	PU3 rw	PU2 rw	PU1 rw	PU0 rw

Toggle fields

PU0

Bit 0: Port A pull-up bit y (y=0..15).

PU1

Bit 1: Port A pull-up bit y (y=0..15).

PU2

Bit 2: Port A pull-up bit y (y=0..15).

PU3

Bit 3: Port A pull-up bit y (y=0..15).

PU4

Bit 4: Port A pull-up bit y (y=0..15).

PU5

Bit 5: Port A pull-up bit y (y=0..15).

PU6

Bit 6: Port A pull-up bit y (y=0..15).

PU7

Bit 7: Port A pull-up bit y (y=0..15).

PU8

Bit 8: Port A pull-up bit y (y=0..15).

PU9

Bit 9: Port A pull-up bit y (y=0..15).

PU10

Bit 10: Port A pull-up bit y (y=0..15).

PU11

Bit 11: Port A pull-up bit y (y=0..15).

PU12

Bit 12: Port A pull-up bit y (y=0..15).

PU13

Bit 13: Port A pull-up bit y (y=0..15).

PU14

Bit 14: Port A pull-up bit y (y=0..15).

PU15

Bit 15: Port A pull-up bit y (y=0..15).

PDCRA

Power Port A pull-down control register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

0/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PD15 rw	PD14 rw	PD13 rw	PD12 rw	PD11 rw	PD10 rw	PD9 rw	PD8 rw	PD7 rw	PD6 rw	PD5 rw	PD4 rw	PD3 rw	PD2 rw	PD1 rw	PD0 rw

Toggle fields

PD0

Bit 0: Port A pull-down bit y (y=0..15).

PD1

Bit 1: Port A pull-down bit y (y=0..15).

PD2

Bit 2: Port A pull-down bit y (y=0..15).

PD3

Bit 3: Port A pull-down bit y (y=0..15).

PD4

Bit 4: Port A pull-down bit y (y=0..15).

PD5

Bit 5: Port A pull-down bit y (y=0..15).

PD6

Bit 6: Port A pull-down bit y (y=0..15).

PD7

Bit 7: Port A pull-down bit y (y=0..15).

PD8

Bit 8: Port A pull-down bit y (y=0..15).

PD9

Bit 9: Port A pull-down bit y (y=0..15).

PD10

Bit 10: Port A pull-down bit y (y=0..15).

PD11

Bit 11: Port A pull-down bit y (y=0..15).

PD12

Bit 12: Port A pull-down bit y (y=0..15).

PD13

Bit 13: Port A pull-down bit y (y=0..15).

PD14

Bit 14: Port A pull-down bit y (y=0..15).

PD15

Bit 15: Port A pull-down bit y (y=0..15).

PUCRB

Power Port B pull-up control register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

0/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PU15 rw	PU14 rw	PU13 rw	PU12 rw	PU11 rw	PU10 rw	PU9 rw	PU8 rw	PU7 rw	PU6 rw	PU5 rw	PU4 rw	PU3 rw	PU2 rw	PU1 rw	PU0 rw

Toggle fields

PU0

Bit 0: Port B pull-up bit y (y=0..15).

PU1

Bit 1: Port B pull-up bit y (y=0..15).

PU2

Bit 2: Port B pull-up bit y (y=0..15).

PU3

Bit 3: Port B pull-up bit y (y=0..15).

PU4

Bit 4: Port B pull-up bit y (y=0..15).

PU5

Bit 5: Port B pull-up bit y (y=0..15).

PU6

Bit 6: Port B pull-up bit y (y=0..15).

PU7

Bit 7: Port B pull-up bit y (y=0..15).

PU8

Bit 8: Port B pull-up bit y (y=0..15).

PU9

Bit 9: Port B pull-up bit y (y=0..15).

PU10

Bit 10: Port B pull-up bit y (y=0..15).

PU11

Bit 11: Port B pull-up bit y (y=0..15).

PU12

Bit 12: Port B pull-up bit y (y=0..15).

PU13

Bit 13: Port B pull-up bit y (y=0..15).

PU14

Bit 14: Port B pull-up bit y (y=0..15).

PU15

Bit 15: Port B pull-up bit y (y=0..15).

PDCRB

Power Port B pull-down control register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

0/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PD15 rw	PD14 rw	PD13 rw	PD12 rw	PD11 rw	PD10 rw	PD9 rw	PD8 rw	PD7 rw	PD6 rw	PD5 rw	PD4 rw	PD3 rw	PD2 rw	PD1 rw	PD0 rw

Toggle fields

PD0

Bit 0: Port B pull-down bit y (y=0..15).

PD1

Bit 1: Port B pull-down bit y (y=0..15).

PD2

Bit 2: Port B pull-down bit y (y=0..15).

PD3

Bit 3: Port B pull-down bit y (y=0..15).

PD4

Bit 4: Port B pull-down bit y (y=0..15).

PD5

Bit 5: Port B pull-down bit y (y=0..15).

PD6

Bit 6: Port B pull-down bit y (y=0..15).

PD7

Bit 7: Port B pull-down bit y (y=0..15).

PD8

Bit 8: Port B pull-down bit y (y=0..15).

PD9

Bit 9: Port B pull-down bit y (y=0..15).

PD10

Bit 10: Port B pull-down bit y (y=0..15).

PD11

Bit 11: Port B pull-down bit y (y=0..15).

PD12

Bit 12: Port B pull-down bit y (y=0..15).

PD13

Bit 13: Port B pull-down bit y (y=0..15).

PD14

Bit 14: Port B pull-down bit y (y=0..15).

PD15

Bit 15: Port B pull-down bit y (y=0..15).

PUCRC

Power Port C pull-up control register

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

0/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PU15 rw	PU14 rw	PU13 rw	PU12 rw	PU11 rw	PU10 rw	PU9 rw	PU8 rw	PU7 rw	PU6 rw	PU5 rw	PU4 rw	PU3 rw	PU2 rw	PU1 rw	PU0 rw

Toggle fields

PU0

Bit 0: Port C pull-up bit y (y=0..15).

PU1

Bit 1: Port C pull-up bit y (y=0..15).

PU2

Bit 2: Port C pull-up bit y (y=0..15).

PU3

Bit 3: Port C pull-up bit y (y=0..15).

PU4

Bit 4: Port C pull-up bit y (y=0..15).

PU5

Bit 5: Port C pull-up bit y (y=0..15).

PU6

Bit 6: Port C pull-up bit y (y=0..15).

PU7

Bit 7: Port C pull-up bit y (y=0..15).

PU8

Bit 8: Port C pull-up bit y (y=0..15).

PU9

Bit 9: Port C pull-up bit y (y=0..15).

PU10

Bit 10: Port C pull-up bit y (y=0..15).

PU11

Bit 11: Port C pull-up bit y (y=0..15).

PU12

Bit 12: Port C pull-up bit y (y=0..15).

PU13

Bit 13: Port C pull-up bit y (y=0..15).

PU14

Bit 14: Port C pull-up bit y (y=0..15).

PU15

Bit 15: Port C pull-up bit y (y=0..15).

PDCRC

Power Port C pull-down control register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

0/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PD15 rw	PD14 rw	PD13 rw	PD12 rw	PD11 rw	PD10 rw	PD9 rw	PD8 rw	PD7 rw	PD6 rw	PD5 rw	PD4 rw	PD3 rw	PD2 rw	PD1 rw	PD0 rw

Toggle fields

PD0

Bit 0: Port C pull-down bit y (y=0..15).

PD1

Bit 1: Port C pull-down bit y (y=0..15).

PD2

Bit 2: Port C pull-down bit y (y=0..15).

PD3

Bit 3: Port C pull-down bit y (y=0..15).

PD4

Bit 4: Port C pull-down bit y (y=0..15).

PD5

Bit 5: Port C pull-down bit y (y=0..15).

PD6

Bit 6: Port C pull-down bit y (y=0..15).

PD7

Bit 7: Port C pull-down bit y (y=0..15).

PD8

Bit 8: Port C pull-down bit y (y=0..15).

PD9

Bit 9: Port C pull-down bit y (y=0..15).

PD10

Bit 10: Port C pull-down bit y (y=0..15).

PD11

Bit 11: Port C pull-down bit y (y=0..15).

PD12

Bit 12: Port C pull-down bit y (y=0..15).

PD13

Bit 13: Port C pull-down bit y (y=0..15).

PD14

Bit 14: Port C pull-down bit y (y=0..15).

PD15

Bit 15: Port C pull-down bit y (y=0..15).

PUCRD

Power Port D pull-up control register

Offset: 0x38, size: 32, reset: 0x00000000, access: read-write

0/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PU15 rw	PU14 rw	PU13 rw	PU12 rw	PU11 rw	PU10 rw	PU9 rw	PU8 rw	PU7 rw	PU6 rw	PU5 rw	PU4 rw	PU3 rw	PU2 rw	PU1 rw	PU0 rw

Toggle fields

PU0

Bit 0: Port D pull-up bit y (y=0..15).

PU1

Bit 1: Port D pull-up bit y (y=0..15).

PU2

Bit 2: Port D pull-up bit y (y=0..15).

PU3

Bit 3: Port D pull-up bit y (y=0..15).

PU4

Bit 4: Port D pull-up bit y (y=0..15).

PU5

Bit 5: Port D pull-up bit y (y=0..15).

PU6

Bit 6: Port D pull-up bit y (y=0..15).

PU7

Bit 7: Port D pull-up bit y (y=0..15).

PU8

Bit 8: Port D pull-up bit y (y=0..15).

PU9

Bit 9: Port D pull-up bit y (y=0..15).

PU10

Bit 10: Port D pull-up bit y (y=0..15).

PU11

Bit 11: Port D pull-up bit y (y=0..15).

PU12

Bit 12: Port D pull-up bit y (y=0..15).

PU13

Bit 13: Port D pull-up bit y (y=0..15).

PU14

Bit 14: Port D pull-up bit y (y=0..15).

PU15

Bit 15: Port D pull-up bit y (y=0..15).

PDCRD

Power Port D pull-down control register

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-write

0/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PD15 rw	PD14 rw	PD13 rw	PD12 rw	PD11 rw	PD10 rw	PD9 rw	PD8 rw	PD7 rw	PD6 rw	PD5 rw	PD4 rw	PD3 rw	PD2 rw	PD1 rw	PD0 rw

Toggle fields

PD0

Bit 0: Port D pull-down bit y (y=0..15).

PD1

Bit 1: Port D pull-down bit y (y=0..15).

PD2

Bit 2: Port D pull-down bit y (y=0..15).

PD3

Bit 3: Port D pull-down bit y (y=0..15).

PD4

Bit 4: Port D pull-down bit y (y=0..15).

PD5

Bit 5: Port D pull-down bit y (y=0..15).

PD6

Bit 6: Port D pull-down bit y (y=0..15).

PD7

Bit 7: Port D pull-down bit y (y=0..15).

PD8

Bit 8: Port D pull-down bit y (y=0..15).

PD9

Bit 9: Port D pull-down bit y (y=0..15).

PD10

Bit 10: Port D pull-down bit y (y=0..15).

PD11

Bit 11: Port D pull-down bit y (y=0..15).

PD12

Bit 12: Port D pull-down bit y (y=0..15).

PD13

Bit 13: Port D pull-down bit y (y=0..15).

PD14

Bit 14: Port D pull-down bit y (y=0..15).

PD15

Bit 15: Port D pull-down bit y (y=0..15).

PUCRE

Power Port E pull-up control register

Offset: 0x40, size: 32, reset: 0x00000000, access: read-write

0/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PU15 rw	PU14 rw	PU13 rw	PU12 rw	PU11 rw	PU10 rw	PU9 rw	PU8 rw	PU7 rw	PU6 rw	PU5 rw	PU4 rw	PU3 rw	PU2 rw	PU1 rw	PU0 rw

Toggle fields

PU0

Bit 0: Port E pull-up bit y (y=0..15).

PU1

Bit 1: Port E pull-up bit y (y=0..15).

PU2

Bit 2: Port E pull-up bit y (y=0..15).

PU3

Bit 3: Port E pull-up bit y (y=0..15).

PU4

Bit 4: Port E pull-up bit y (y=0..15).

PU5

Bit 5: Port E pull-up bit y (y=0..15).

PU6

Bit 6: Port E pull-up bit y (y=0..15).

PU7

Bit 7: Port E pull-up bit y (y=0..15).

PU8

Bit 8: Port E pull-up bit y (y=0..15).

PU9

Bit 9: Port E pull-up bit y (y=0..15).

PU10

Bit 10: Port E pull-up bit y (y=0..15).

PU11

Bit 11: Port E pull-up bit y (y=0..15).

PU12

Bit 12: Port E pull-up bit y (y=0..15).

PU13

Bit 13: Port E pull-up bit y (y=0..15).

PU14

Bit 14: Port E pull-up bit y (y=0..15).

PU15

Bit 15: Port E pull-up bit y (y=0..15).

PDCRE

Power Port E pull-down control register

Offset: 0x44, size: 32, reset: 0x00000000, access: read-write

0/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PD15 rw	PD14 rw	PD13 rw	PD12 rw	PD11 rw	PD10 rw	PD9 rw	PD8 rw	PD7 rw	PD6 rw	PD5 rw	PD4 rw	PD3 rw	PD2 rw	PD1 rw	PD0 rw

Toggle fields

PD0

Bit 0: Port E pull-down bit y (y=0..15).

PD1

Bit 1: Port E pull-down bit y (y=0..15).

PD2

Bit 2: Port E pull-down bit y (y=0..15).

PD3

Bit 3: Port E pull-down bit y (y=0..15).

PD4

Bit 4: Port E pull-down bit y (y=0..15).

PD5

Bit 5: Port E pull-down bit y (y=0..15).

PD6

Bit 6: Port E pull-down bit y (y=0..15).

PD7

Bit 7: Port E pull-down bit y (y=0..15).

PD8

Bit 8: Port E pull-down bit y (y=0..15).

PD9

Bit 9: Port E pull-down bit y (y=0..15).

PD10

Bit 10: Port E pull-down bit y (y=0..15).

PD11

Bit 11: Port E pull-down bit y (y=0..15).

PD12

Bit 12: Port E pull-down bit y (y=0..15).

PD13

Bit 13: Port E pull-down bit y (y=0..15).

PD14

Bit 14: Port E pull-down bit y (y=0..15).

PD15

Bit 15: Port E pull-down bit y (y=0..15).

PUCRF

Power Port F pull-up control register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-write

0/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PU15 rw	PU14 rw	PU13 rw	PU12 rw	PU11 rw	PU10 rw	PU9 rw	PU8 rw	PU7 rw	PU6 rw	PU5 rw	PU4 rw	PU3 rw	PU2 rw	PU1 rw	PU0 rw

Toggle fields

PU0

Bit 0: Port F pull-up bit y (y=0..15).

PU1

Bit 1: Port F pull-up bit y (y=0..15).

PU2

Bit 2: Port F pull-up bit y (y=0..15).

PU3

Bit 3: Port F pull-up bit y (y=0..15).

PU4

Bit 4: Port F pull-up bit y (y=0..15).

PU5

Bit 5: Port F pull-up bit y (y=0..15).

PU6

Bit 6: Port F pull-up bit y (y=0..15).

PU7

Bit 7: Port F pull-up bit y (y=0..15).

PU8

Bit 8: Port F pull-up bit y (y=0..15).

PU9

Bit 9: Port F pull-up bit y (y=0..15).

PU10

Bit 10: Port F pull-up bit y (y=0..15).

PU11

Bit 11: Port F pull-up bit y (y=0..15).

PU12

Bit 12: Port F pull-up bit y (y=0..15).

PU13

Bit 13: Port F pull-up bit y (y=0..15).

PU14

Bit 14: Port F pull-up bit y (y=0..15).

PU15

Bit 15: Port F pull-up bit y (y=0..15).

PDCRF

Power Port F pull-down control register

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

0/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PD15 rw	PD14 rw	PD13 rw	PD12 rw	PD11 rw	PD10 rw	PD9 rw	PD8 rw	PD7 rw	PD6 rw	PD5 rw	PD4 rw	PD3 rw	PD2 rw	PD1 rw	PD0 rw

Toggle fields

PD0

Bit 0: Port F pull-down bit y (y=0..15).

PD1

Bit 1: Port F pull-down bit y (y=0..15).

PD2

Bit 2: Port F pull-down bit y (y=0..15).

PD3

Bit 3: Port F pull-down bit y (y=0..15).

PD4

Bit 4: Port F pull-down bit y (y=0..15).

PD5

Bit 5: Port F pull-down bit y (y=0..15).

PD6

Bit 6: Port F pull-down bit y (y=0..15).

PD7

Bit 7: Port F pull-down bit y (y=0..15).

PD8

Bit 8: Port F pull-down bit y (y=0..15).

PD9

Bit 9: Port F pull-down bit y (y=0..15).

PD10

Bit 10: Port F pull-down bit y (y=0..15).

PD11

Bit 11: Port F pull-down bit y (y=0..15).

PD12

Bit 12: Port F pull-down bit y (y=0..15).

PD13

Bit 13: Port F pull-down bit y (y=0..15).

PD14

Bit 14: Port F pull-down bit y (y=0..15).

PD15

Bit 15: Port F pull-down bit y (y=0..15).

PUCRG

Power Port G pull-up control register

Offset: 0x50, size: 32, reset: 0x00000000, access: read-write

0/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PU15 rw	PU14 rw	PU13 rw	PU12 rw	PU11 rw	PU10 rw	PU9 rw	PU8 rw	PU7 rw	PU6 rw	PU5 rw	PU4 rw	PU3 rw	PU2 rw	PU1 rw	PU0 rw

Toggle fields

PU0

Bit 0: Port G pull-up bit y (y=0..15).

PU1

Bit 1: Port G pull-up bit y (y=0..15).

PU2

Bit 2: Port G pull-up bit y (y=0..15).

PU3

Bit 3: Port G pull-up bit y (y=0..15).

PU4

Bit 4: Port G pull-up bit y (y=0..15).

PU5

Bit 5: Port G pull-up bit y (y=0..15).

PU6

Bit 6: Port G pull-up bit y (y=0..15).

PU7

Bit 7: Port G pull-up bit y (y=0..15).

PU8

Bit 8: Port G pull-up bit y (y=0..15).

PU9

Bit 9: Port G pull-up bit y (y=0..15).

PU10

Bit 10: Port G pull-up bit y (y=0..15).

PU11

Bit 11: Port G pull-up bit y (y=0..15).

PU12

Bit 12: Port G pull-up bit y (y=0..15).

PU13

Bit 13: Port G pull-up bit y (y=0..15).

PU14

Bit 14: Port G pull-up bit y (y=0..15).

PU15

Bit 15: Port G pull-up bit y (y=0..15).

PDCRG

Power Port G pull-down control register

Offset: 0x54, size: 32, reset: 0x00000000, access: read-write

0/16 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PD15 rw	PD14 rw	PD13 rw	PD12 rw	PD11 rw	PD10 rw	PD9 rw	PD8 rw	PD7 rw	PD6 rw	PD5 rw	PD4 rw	PD3 rw	PD2 rw	PD1 rw	PD0 rw

Toggle fields

PD0

Bit 0: Port G pull-down bit y (y=0..15).

PD1

Bit 1: Port G pull-down bit y (y=0..15).

PD2

Bit 2: Port G pull-down bit y (y=0..15).

PD3

Bit 3: Port G pull-down bit y (y=0..15).

PD4

Bit 4: Port G pull-down bit y (y=0..15).

PD5

Bit 5: Port G pull-down bit y (y=0..15).

PD6

Bit 6: Port G pull-down bit y (y=0..15).

PD7

Bit 7: Port G pull-down bit y (y=0..15).

PD8

Bit 8: Port G pull-down bit y (y=0..15).

PD9

Bit 9: Port G pull-down bit y (y=0..15).

PD10

Bit 10: Port G pull-down bit y (y=0..15).

PD11

Bit 11: Port G pull-down bit y (y=0..15).

PD12

Bit 12: Port G pull-down bit y (y=0..15).

PD13

Bit 13: Port G pull-down bit y (y=0..15).

PD14

Bit 14: Port G pull-down bit y (y=0..15).

PD15

Bit 15: Port G pull-down bit y (y=0..15).

PUCRH

Power Port H pull-up control register

Offset: 0x58, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
														PU1 rw	PU0 rw

Toggle fields

PU0

Bit 0: Port H pull-up bit y (y=0..1).

PU1

Bit 1: Port H pull-up bit y (y=0..1).

PDCRH

Power Port H pull-down control register

Offset: 0x5c, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
														PD1 rw	PD0 rw

Toggle fields

PD0

Bit 0: Port H pull-down bit y (y=0..1).

PD1

Bit 1: Port H pull-down bit y (y=0..1).

RCC

0x40021000: Reset and clock control

56/252 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	CR					PLLSAI1RDY	PLLSAI1ON	PLLRDY	PLLON					CSSON	HSEBYP	HSERDY	HSEON					HSIASFS	HSIRDY	HSIKERON	HSION	MSIRANGE				MSIRGSEL	MSIPLLEN	MSIRDY	MSION
0x4	ICSCR				HSITRIM					HSICAL								MSITRIM								MSICAL
0x8	CFGR		MCOPRE				MCOSEL											STOPWUCK		PPRE2			PPRE1			HPRE				SWS		SW
0xc	PLLCFGR						PLLR		PLLREN		PLLQ		PLLQEN			PLLP	PLLPEN		PLLN								PLLM					PLLSRC
0x10	PLLSAI1CFGR						PLLSAI1R		PLLSAI1REN		PLLSAI1Q		PLLSAI1QEN			PLLSAI1P	PLLSAI1PEN		PLLSAI1N
0x18	CIER																						HSI48RDYIE	LSECSSIE			PLLSAI1RDYIE	PLLRDYIE	HSERDYIE	HSIRDYIE	MSIRDYIE	LSERDYIE	LSIRDYIE
0x1c	CIFR																						HSI48RDYF	LSECSSF	CSSF		PLLSAI1RDYF	PLLRDYF	HSERDYF	HSIRDYF	MSIRDYF	LSERDYF	LSIRDYF
0x20	CICR																						HSI48RDYC	LSECSSC	CSSC		PLLSAI1RDYC	PLLRDYC	HSERDYC	HSIRDYC	MSIRDYC	LSERDYC	LSIRDYC
0x28	AHB1RSTR																TSCRST				CRCRST				FLASHRST							DMA2RST	DMA1RST
0x2c	AHB2RSTR														RNGRST		AESRST			ADCRST						GPIOHRST			GPIOERST	GPIODRST	GPIOCRST	GPIOBRST	GPIOARST
0x30	AHB3RSTR																								QSPIRST
0x38	APB1RSTR1	LPTIM1RST	OPAMPRST	DAC1RST	PWRRST		USBFSRST	CAN1RST		I2C3RST	I2C2RST	I2C1RST	UART5RST	UART4RST	USART3RST	USART2RST		SPI3RST	SPI2RST					LCDRST				TIM7RST	TIM6RST				TIM2RST
0x3c	APB1RSTR2																											LPTIM2RST			SWPMI1RST		LPUART1RST
0x40	APB2RSTR											SAI1RST				TIM16RST	TIM15RST		USART1RST		SPI1RST	TIM1RST	SDMMCRST										SYSCFGRST
0x48	AHB1ENR																TSCEN				CRCEN				FLASHEN							DMA2EN	DMA1EN
0x4c	AHB2ENR														RNGEN		AESEN			ADCEN						GPIOHEN			GPIOEEN	GPIODEN	GPIOCEN	GPIOBEN	GPIOAEN
0x50	AHB3ENR																								QSPIEN
0x58	APB1ENR1	LPTIM1EN	OPAMPEN	DAC1EN	PWREN		USBFSEN	CAN1EN	CRSEN	I2C3EN	I2C2EN	I2C1EN			USART3EN	USART2EN		SPI3EN	SPI2EN			WWDGEN	RTCAPBEN	LCDEN				TIM7EN	TIM6EN				TIM2EN
0x5c	APB1ENR2																											LPTIM2EN			SWPMI1EN		LPUART1EN
0x60	APB2ENR											SAI1EN				TIM16EN	TIM15EN		USART1EN		SPI1EN	TIM1EN	SDMMCEN			FIREWALLEN							SYSCFGEN
0x68	AHB1SMENR																TSCSMEN				CRCSMEN			SRAM1SMEN	FLASHSMEN							DMA2SMEN	DMA1SMEN
0x6c	AHB2SMENR														RNGSMEN		AESSMEN			ADCFSSMEN				SRAM2SMEN		GPIOHSMEN			GPIOESMEN	GPIODSMEN	GPIOCSMEN	GPIOBSMEN	GPIOASMEN
0x70	AHB3SMENR																								QSPISMEN
0x78	APB1SMENR1	LPTIM1SMEN	OPAMPSMEN	DAC1SMEN	PWRSMEN		USBFSSMEN	CAN1SMEN		I2C3SMEN	I2C2SMEN	I2C1SMEN			USART3SMEN	USART2SMEN		SP3SMEN	SPI2SMEN			WWDGSMEN	RTCAPBSMEN	LCDSMEN				TIM7SMEN	TIM6SMEN				TIM2SMEN
0x7c	APB1SMENR2																											LPTIM2SMEN			SWPMI1SMEN		LPUART1SMEN
0x80	APB2SMENR											SAI1SMEN				TIM16SMEN	TIM15SMEN		USART1SMEN		SPI1SMEN	TIM1SMEN	SDMMCSMEN										SYSCFGSMEN
0x88	CCIPR		SWPMI1SEL	ADCSEL		CLK48SEL				SAI1SEL		LPTIM2SEL		LPTIM1SEL		I2C3SEL		I2C2SEL		I2C1SEL		LPUART1SEL						USART3SEL		USART2SEL		USART1SEL
0x90	BDCR							LSCOSEL	LSCOEN								BDRST	RTCEN						RTCSEL			LSECSSD	LSECSSON	LSEDRV		LSEBYP	LSERDY	LSEON
0x94	CSR	LPWRSTF	WWDGRSTF	IWDGRSTF	SFTRSTF	BORRSTF	PINRSTF	OBLRSTF	FIREWALLRSTF	RMVF												MSISRANGE										LSIRDY	LSION
0x98	CRRCR																	HSI48CAL														HSI48RDY	HSI48ON

Toggle registers

CR

Clock control register

Offset: 0x0, size: 32, reset: 0x00000063, access: Unspecified

6/17 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
				PLLSAI1RDY r	PLLSAI1ON rw	PLLRDY r	PLLON rw					CSSON w	HSEBYP rw	HSERDY r	HSEON rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				HSIASFS rw	HSIRDY r	HSIKERON rw	HSION rw	MSIRANGE rw				MSIRGSEL w	MSIPLLEN rw	MSIRDY r	MSION rw

Toggle fields

MSION

Bit 0: MSI clock enable.

MSIRDY

Bit 1: MSI clock ready flag.

MSIPLLEN

Bit 2: MSI clock PLL enable.

MSIRGSEL

Bit 3: MSI clock range selection.

MSIRANGE

Bits 4-7: MSI clock ranges.

Allowed values:
0: Range100K: range 0 around 100 kHz
1: Range200K: range 1 around 200 kHz
2: Range400K: range 2 around 400 kHz
3: Range800K: range 3 around 800 kHz
4: Range1M: range 4 around 1 MHz
5: Range2M: range 5 around 2 MHz
6: Range4M: range 6 around 4 MHz
7: Range8M: range 7 around 8 MHz
8: Range16M: range 8 around 16 MHz
9: Range24M: range 9 around 24 MHz
10: Range32M: range 10 around 32 MHz
11: Range48M: range 11 around 48 MHz

HSION

Bit 8: HSI clock enable.

HSIKERON

Bit 9: HSI always enable for peripheral kernels.

HSIRDY

Bit 10: HSI clock ready flag.

HSIASFS

Bit 11: HSI automatic start from Stop.

HSEON

Bit 16: HSE clock enable.

HSERDY

Bit 17: HSE clock ready flag.

HSEBYP

Bit 18: HSE crystal oscillator bypass.

CSSON

Bit 19: Clock security system enable.

PLLON

Bit 24: Main PLL enable.

PLLRDY

Bit 25: Main PLL clock ready flag.

PLLSAI1ON

Bit 26: SAI1 PLL enable.

PLLSAI1RDY

Bit 27: SAI1 PLL clock ready flag.

ICSCR

Internal clock sources calibration register

Offset: 0x4, size: 32, reset: 0x10000000, access: Unspecified

2/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
			HSITRIM rw					HSICAL r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MSITRIM rw								MSICAL r

Toggle fields

MSICAL

Bits 0-7: MSI clock calibration.

MSITRIM

Bits 8-15: MSI clock trimming.

HSICAL

Bits 16-23: HSI clock calibration.

HSITRIM

Bits 24-28: HSI clock trimming.

CFGR

Clock configuration register

Offset: 0x8, size: 32, reset: 0x00000000, access: Unspecified

2/8 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
	MCOPRE r				MCOSEL rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
STOPWUCK rw		PPRE2 rw			PPRE1 rw			HPRE rw				SWS r		SW rw

Toggle fields

SW

Bits 0-1: System clock switch.

SWS

Bits 2-3: System clock switch status.

HPRE

Bits 4-7: AHB prescaler.

PPRE1

Bits 8-10: PB low-speed prescaler (APB1).

PPRE2

Bits 11-13: APB high-speed prescaler (APB2).

STOPWUCK

Bit 15: Wakeup from Stop and CSS backup clock selection.

MCOSEL

Bits 24-26: Microcontroller clock output.

MCOPRE

Bits 28-30: Microcontroller clock output prescaler.

PLLCFGR

PLL configuration register

Offset: 0xc, size: 32, reset: 0x00001000, access: read-write

0/9 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
					PLLR rw		PLLREN rw		PLLQ rw		PLLQEN rw			PLLP rw	PLLPEN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	PLLN rw								PLLM rw					PLLSRC rw

Toggle fields

PLLSRC

Bits 0-1: Main PLL, PLLSAI1 and PLLSAI2 entry clock source.

PLLM

Bits 4-6: Division factor for the main PLL and audio PLL (PLLSAI1 and PLLSAI2) input clock.

PLLN

Bits 8-14: Main PLL multiplication factor for VCO.

PLLPEN

Bit 16: Main PLL PLLSAI3CLK output enable.

PLLP

Bit 17: Main PLL division factor for PLLSAI3CLK (SAI1 and SAI2 clock).

PLLQEN

Bit 20: Main PLL PLLUSB1CLK output enable.

PLLQ

Bits 21-22: Main PLL division factor for PLLUSB1CLK(48 MHz clock).

PLLREN

Bit 24: Main PLL PLLCLK output enable.

PLLR

Bits 25-26: Main PLL division factor for PLLCLK (system clock).

PLLSAI1CFGR

PLLSAI1 configuration register

Offset: 0x10, size: 32, reset: 0x00001000, access: read-write

0/7 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
					PLLSAI1R rw		PLLSAI1REN rw		PLLSAI1Q rw		PLLSAI1QEN rw			PLLSAI1P rw	PLLSAI1PEN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	PLLSAI1N rw

Toggle fields

PLLSAI1N

Bits 8-14: SAI1PLL multiplication factor for VCO.

PLLSAI1PEN

Bit 16: SAI1PLL PLLSAI1CLK output enable.

PLLSAI1P

Bit 17: SAI1PLL division factor for PLLSAI1CLK (SAI1 or SAI2 clock).

PLLSAI1QEN

Bit 20: SAI1PLL PLLUSB2CLK output enable.

PLLSAI1Q

Bits 21-22: SAI1PLL division factor for PLLUSB2CLK (48 MHz clock).

PLLSAI1REN

Bit 24: PLLSAI1 PLLADC1CLK output enable.

PLLSAI1R

Bits 25-26: PLLSAI1 division factor for PLLADC1CLK (ADC clock).

CIER

Clock interrupt enable register

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

0/9 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
					HSI48RDYIE rw	LSECSSIE rw			PLLSAI1RDYIE rw	PLLRDYIE rw	HSERDYIE rw	HSIRDYIE rw	MSIRDYIE rw	LSERDYIE rw	LSIRDYIE rw

Toggle fields

LSIRDYIE

Bit 0: LSI ready interrupt enable.

LSERDYIE

Bit 1: LSE ready interrupt enable.

MSIRDYIE

Bit 2: MSI ready interrupt enable.

HSIRDYIE

Bit 3: HSI ready interrupt enable.

HSERDYIE

Bit 4: HSE ready interrupt enable.

PLLRDYIE

Bit 5: PLL ready interrupt enable.

PLLSAI1RDYIE

Bit 6: PLLSAI1 ready interrupt enable.

LSECSSIE

Bit 9: LSE clock security system interrupt enable.

HSI48RDYIE

Bit 10: HSI48 ready interrupt enable.

CIFR

Clock interrupt flag register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-only

10/10 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
					HSI48RDYF r	LSECSSF r	CSSF r		PLLSAI1RDYF r	PLLRDYF r	HSERDYF r	HSIRDYF r	MSIRDYF r	LSERDYF r	LSIRDYF r

Toggle fields

LSIRDYF

Bit 0: LSI ready interrupt flag.

LSERDYF

Bit 1: LSE ready interrupt flag.

MSIRDYF

Bit 2: MSI ready interrupt flag.

HSIRDYF

Bit 3: HSI ready interrupt flag.

HSERDYF

Bit 4: HSE ready interrupt flag.

PLLRDYF

Bit 5: PLL ready interrupt flag.

PLLSAI1RDYF

Bit 6: PLLSAI1 ready interrupt flag.

CSSF

Bit 8: Clock security system interrupt flag.

LSECSSF

Bit 9: LSE Clock security system interrupt flag.

HSI48RDYF

Bit 10: HSI48 ready interrupt flag.

CICR

Clock interrupt clear register

Offset: 0x20, size: 32, reset: 0x00000000, access: write-only

0/10 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
					HSI48RDYC w	LSECSSC w	CSSC w		PLLSAI1RDYC w	PLLRDYC w	HSERDYC w	HSIRDYC w	MSIRDYC w	LSERDYC w	LSIRDYC w

Toggle fields

LSIRDYC

Bit 0: LSI ready interrupt clear.

LSERDYC

Bit 1: LSE ready interrupt clear.

MSIRDYC

Bit 2: MSI ready interrupt clear.

HSIRDYC

Bit 3: HSI ready interrupt clear.

HSERDYC

Bit 4: HSE ready interrupt clear.

PLLRDYC

Bit 5: PLL ready interrupt clear.

PLLSAI1RDYC

Bit 6: PLLSAI1 ready interrupt clear.

CSSC

Bit 8: Clock security system interrupt clear.

LSECSSC

Bit 9: LSE Clock security system interrupt clear.

HSI48RDYC

Bit 10: HSI48 oscillator ready interrupt clear.

AHB1RSTR

AHB1 peripheral reset register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

0/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
															TSCRST rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			CRCRST rw				FLASHRST rw							DMA2RST rw	DMA1RST rw

Toggle fields

DMA1RST

Bit 0: DMA1 reset.

DMA2RST

Bit 1: DMA2 reset.

FLASHRST

Bit 8: Flash memory interface reset.

CRCRST

Bit 12: CRC reset.

TSCRST

Bit 16: Touch Sensing Controller reset.

AHB2RSTR

AHB2 peripheral reset register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

0/9 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
													RNGRST rw		AESRST rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		ADCRST rw						GPIOHRST rw			GPIOERST rw	GPIODRST rw	GPIOCRST rw	GPIOBRST rw	GPIOARST rw

Toggle fields

GPIOARST

Bit 0: IO port A reset.

GPIOBRST

Bit 1: IO port B reset.

GPIOCRST

Bit 2: IO port C reset.

GPIODRST

Bit 3: IO port D reset.

GPIOERST

Bit 4: IO port E reset.

GPIOHRST

Bit 7: IO port H reset.

ADCRST

Bit 13: ADC reset.

AESRST

Bit 16: AES hardware accelerator reset.

RNGRST

Bit 18: Random number generator reset.

AHB3RSTR

AHB3 peripheral reset register

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							QSPIRST rw

Toggle fields

QSPIRST

Bit 8: Quad SPI memory interface reset.

APB1RSTR1

APB1 peripheral reset register 1

Offset: 0x38, size: 32, reset: 0x00000000, access: read-write

0/19 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
LPTIM1RST rw	OPAMPRST rw	DAC1RST rw	PWRRST rw		USBFSRST rw	CAN1RST rw		I2C3RST rw	I2C2RST rw	I2C1RST rw	UART5RST rw	UART4RST rw	USART3RST rw	USART2RST rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SPI3RST rw	SPI2RST rw					LCDRST rw				TIM7RST rw	TIM6RST rw				TIM2RST rw

Toggle fields

TIM2RST

Bit 0: TIM2 timer reset.

TIM6RST

Bit 4: TIM6 timer reset.

TIM7RST

Bit 5: TIM7 timer reset.

LCDRST

Bit 9: LCD interface reset.

SPI2RST

Bit 14: SPI2 reset.

SPI3RST

Bit 15: SPI3 reset.

USART2RST

Bit 17: USART2 reset.

USART3RST

Bit 18: USART3 reset.

UART4RST

Bit 19: UART4 reset.

UART5RST

Bit 20: UART5 reset.

I2C1RST

Bit 21: I2C1 reset.

I2C2RST

Bit 22: I2C2 reset.

I2C3RST

Bit 23: I2C3 reset.

CAN1RST

Bit 25: CAN1 reset.

USBFSRST

Bit 26: USB FS reset.

PWRRST

Bit 28: Power interface reset.

DAC1RST

Bit 29: DAC1 interface reset.

OPAMPRST

Bit 30: OPAMP interface reset.

LPTIM1RST

Bit 31: Low Power Timer 1 reset.

APB1RSTR2

APB1 peripheral reset register 2

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
										LPTIM2RST rw			SWPMI1RST rw		LPUART1RST rw

Toggle fields

LPUART1RST

Bit 0: Low-power UART 1 reset.

SWPMI1RST

Bit 2: Single wire protocol reset.

LPTIM2RST

Bit 5: Low-power timer 2 reset.

APB2RSTR

APB2 peripheral reset register

Offset: 0x40, size: 32, reset: 0x00000000, access: read-write

0/8 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
										SAI1RST rw				TIM16RST rw	TIM15RST rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	USART1RST rw		SPI1RST rw	TIM1RST rw	SDMMCRST rw										SYSCFGRST rw

Toggle fields

SYSCFGRST

Bit 0: System configuration (SYSCFG) reset.

SDMMCRST

Bit 10: SDMMC reset.

TIM1RST

Bit 11: TIM1 timer reset.

SPI1RST

Bit 12: SPI1 reset.

USART1RST

Bit 14: USART1 reset.

TIM15RST

Bit 16: TIM15 timer reset.

TIM16RST

Bit 17: TIM16 timer reset.

SAI1RST

Bit 21: Serial audio interface 1 (SAI1) reset.

AHB1ENR

AHB1 peripheral clock enable register

Offset: 0x48, size: 32, reset: 0x00000100, access: read-write

0/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
															TSCEN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			CRCEN rw				FLASHEN rw							DMA2EN rw	DMA1EN rw

Toggle fields

DMA1EN

Bit 0: DMA1 clock enable.

DMA2EN

Bit 1: DMA2 clock enable.

FLASHEN

Bit 8: Flash memory interface clock enable.

CRCEN

Bit 12: CRC clock enable.

TSCEN

Bit 16: Touch Sensing Controller clock enable.

AHB2ENR

AHB2 peripheral clock enable register

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

1/9 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
													RNGEN rw		AESEN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		ADCEN rw						GPIOHEN rw			GPIOEEN rw	GPIODEN rw	GPIOCEN rw	GPIOBEN rw	GPIOAEN rw

Toggle fields

GPIOAEN

Bit 0: IO port A clock enable.

GPIOBEN

Bit 1: IO port B clock enable.

GPIOCEN

Bit 2: IO port C clock enable.

GPIODEN

Bit 3: IO port D clock enable.

GPIOEEN

Bit 4: IO port E clock enable.

GPIOHEN

Bit 7: IO port H clock enable.

ADCEN

Bit 13: ADC clock enable.

Allowed values:
0: Disabled: ADC clock disabled
1: Enabled: ADC clock enabled

AESEN

Bit 16: AES accelerator clock enable.

RNGEN

Bit 18: Random Number Generator clock enable.

AHB3ENR

AHB3 peripheral clock enable register

Offset: 0x50, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							QSPIEN rw

Toggle fields

QSPIEN

Bit 8: QSPIEN.

APB1ENR1

Offset: 0x58, size: 32, reset: 0x00000000, access: read-write

6/20 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
LPTIM1EN rw	OPAMPEN rw	DAC1EN rw	PWREN rw		USBFSEN rw	CAN1EN rw	CRSEN rw	I2C3EN rw	I2C2EN rw	I2C1EN rw			USART3EN rw	USART2EN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SPI3EN rw	SPI2EN rw			WWDGEN rw	RTCAPBEN rw	LCDEN rw				TIM7EN rw	TIM6EN rw				TIM2EN rw

Toggle fields

TIM2EN

Bit 0: TIM2 timer clock enable.

TIM6EN

Bit 4: TIM6 timer clock enable.

TIM7EN

Bit 5: TIM7 timer clock enable.

LCDEN

Bit 9: LCD clock enable.

RTCAPBEN

Bit 10: RTC APB clock enable.

WWDGEN

Bit 11: Window watchdog clock enable.

SPI2EN

Bit 14: SPI2 clock enable.

SPI3EN

Bit 15: SPI peripheral 3 clock enable.

USART2EN

Bit 17: USART2 clock enable.

Allowed values:
0: Disabled: USART2 clock disabled
1: Enabled: USART2 clock enabled

USART3EN

Bit 18: USART3 clock enable.

Allowed values:
0: Disabled: USART3 clock disabled
1: Enabled: USART3 clock enabled

I2C1EN

Bit 21: I2C1 clock enable.

Allowed values:
0: Disabled: I2C1 clock disabled
1: Enabled: I2C1 clock enabled

I2C2EN

Bit 22: I2C2 clock enable.

Allowed values:
0: Disabled: I2C2 clock disabled
1: Enabled: I2C2 clock enabled

I2C3EN

Bit 23: I2C3 clock enable.

Allowed values:
0: Disabled: I2C3 clock disabled
1: Enabled: I2C3 clock enabled

CRSEN

Bit 24: CRS clock enable.

CAN1EN

Bit 25: CAN1 clock enable.

USBFSEN

Bit 26: USB FS clock enable.

PWREN

Bit 28: Power interface clock enable.

DAC1EN

Bit 29: DAC1 interface clock enable.

OPAMPEN

Bit 30: OPAMP interface clock enable.

LPTIM1EN

Bit 31: Low power timer 1 clock enable.

Allowed values:
0: Disabled: LPTIM1 clock disabled
1: Enabled: LPTIM1 clock enabled

APB1ENR2

APB1 peripheral clock enable register 2

Offset: 0x5c, size: 32, reset: 0x00000000, access: read-write

2/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
										LPTIM2EN rw			SWPMI1EN rw		LPUART1EN rw

Toggle fields

LPUART1EN

Bit 0: Low power UART 1 clock enable.

Allowed values:
0: Disabled: LPUART1 clock disabled
1: Enabled: LPUART1 clock enabled

SWPMI1EN

Bit 2: Single wire protocol clock enable.

LPTIM2EN

Bit 5: LPTIM2EN.

Allowed values:
0: Disabled: LPTIM2 clock disabled
1: Enabled: LPTIM2 clock enabled

APB2ENR

Offset: 0x60, size: 32, reset: 0x00000000, access: read-write

1/9 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
										SAI1EN rw				TIM16EN rw	TIM15EN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	USART1EN rw		SPI1EN rw	TIM1EN rw	SDMMCEN rw			FIREWALLEN rw							SYSCFGEN rw

Toggle fields

SYSCFGEN

Bit 0: SYSCFG clock enable.

FIREWALLEN

Bit 7: Firewall clock enable.

SDMMCEN

Bit 10: SDMMC clock enable.

TIM1EN

Bit 11: TIM1 timer clock enable.

SPI1EN

Bit 12: SPI1 clock enable.

USART1EN

Bit 14: USART1clock enable.

Allowed values:
0: Disabled: USART1 clock disabled
1: Enabled: USART1 clock enabled

TIM15EN

Bit 16: TIM15 timer clock enable.

TIM16EN

Bit 17: TIM16 timer clock enable.

SAI1EN

Bit 21: SAI1 clock enable.

AHB1SMENR

AHB1 peripheral clocks enable in Sleep and Stop modes register

Offset: 0x68, size: 32, reset: 0x00011303, access: read-write

0/6 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
															TSCSMEN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			CRCSMEN rw			SRAM1SMEN rw	FLASHSMEN rw							DMA2SMEN rw	DMA1SMEN rw

Toggle fields

DMA1SMEN

Bit 0: DMA1 clocks enable during Sleep and Stop modes.

DMA2SMEN

Bit 1: DMA2 clocks enable during Sleep and Stop modes.

FLASHSMEN

Bit 8: Flash memory interface clocks enable during Sleep and Stop modes.

SRAM1SMEN

Bit 9: SRAM1 interface clocks enable during Sleep and Stop modes.

CRCSMEN

Bit 12: CRCSMEN.

TSCSMEN

Bit 16: Touch Sensing Controller clocks enable during Sleep and Stop modes.

AHB2SMENR

AHB2 peripheral clocks enable in Sleep and Stop modes register

Offset: 0x6c, size: 32, reset: 0x000532FF, access: read-write

0/10 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
													RNGSMEN rw		AESSMEN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		ADCFSSMEN rw				SRAM2SMEN rw		GPIOHSMEN rw			GPIOESMEN rw	GPIODSMEN rw	GPIOCSMEN rw	GPIOBSMEN rw	GPIOASMEN rw

Toggle fields

GPIOASMEN

Bit 0: IO port A clocks enable during Sleep and Stop modes.

GPIOBSMEN

Bit 1: IO port B clocks enable during Sleep and Stop modes.

GPIOCSMEN

Bit 2: IO port C clocks enable during Sleep and Stop modes.

GPIODSMEN

Bit 3: IO port D clocks enable during Sleep and Stop modes.

GPIOESMEN

Bit 4: IO port E clocks enable during Sleep and Stop modes.

GPIOHSMEN

Bit 7: IO port H clocks enable during Sleep and Stop modes.

SRAM2SMEN

Bit 9: SRAM2 interface clocks enable during Sleep and Stop modes.

ADCFSSMEN

Bit 13: ADC clocks enable during Sleep and Stop modes.

AESSMEN

Bit 16: AES accelerator clocks enable during Sleep and Stop modes.

RNGSMEN

Bit 18: Random Number Generator clocks enable during Sleep and Stop modes.

AHB3SMENR

AHB3 peripheral clocks enable in Sleep and Stop modes register

Offset: 0x70, size: 32, reset: 0x00000101, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							QSPISMEN rw

Toggle fields

QSPISMEN

Bit 8: QSPISMEN.

APB1SMENR1

Offset: 0x78, size: 32, reset: 0xF2FECA3F, access: read-write

0/19 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
LPTIM1SMEN rw	OPAMPSMEN rw	DAC1SMEN rw	PWRSMEN rw		USBFSSMEN rw	CAN1SMEN rw		I2C3SMEN rw	I2C2SMEN rw	I2C1SMEN rw			USART3SMEN rw	USART2SMEN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SP3SMEN rw	SPI2SMEN rw			WWDGSMEN rw	RTCAPBSMEN rw	LCDSMEN rw				TIM7SMEN rw	TIM6SMEN rw				TIM2SMEN rw

Toggle fields

TIM2SMEN

Bit 0: TIM2 timer clocks enable during Sleep and Stop modes.

TIM6SMEN

Bit 4: TIM6 timer clocks enable during Sleep and Stop modes.

TIM7SMEN

Bit 5: TIM7 timer clocks enable during Sleep and Stop modes.

LCDSMEN

Bit 9: LCD clocks enable during Sleep and Stop modes.

RTCAPBSMEN

Bit 10: RTC APB clock enable during Sleep and Stop modes.

WWDGSMEN

Bit 11: Window watchdog clocks enable during Sleep and Stop modes.

SPI2SMEN

Bit 14: SPI2 clocks enable during Sleep and Stop modes.

SP3SMEN

Bit 15: SPI3 clocks enable during Sleep and Stop modes.

USART2SMEN

Bit 17: USART2 clocks enable during Sleep and Stop modes.

USART3SMEN

Bit 18: USART3 clocks enable during Sleep and Stop modes.

I2C1SMEN

Bit 21: I2C1 clocks enable during Sleep and Stop modes.

I2C2SMEN

Bit 22: I2C2 clocks enable during Sleep and Stop modes.

I2C3SMEN

Bit 23: I2C3 clocks enable during Sleep and Stop modes.

CAN1SMEN

Bit 25: CAN1 clocks enable during Sleep and Stop modes.

USBFSSMEN

Bit 26: USB FS clock enable during Sleep and Stop modes.

PWRSMEN

Bit 28: Power interface clocks enable during Sleep and Stop modes.

DAC1SMEN

Bit 29: DAC1 interface clocks enable during Sleep and Stop modes.

OPAMPSMEN

Bit 30: OPAMP interface clocks enable during Sleep and Stop modes.

LPTIM1SMEN

Bit 31: Low power timer 1 clocks enable during Sleep and Stop modes.

APB1SMENR2

APB1 peripheral clocks enable in Sleep and Stop modes register 2

Offset: 0x7c, size: 32, reset: 0x00000025, access: read-write

0/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
										LPTIM2SMEN rw			SWPMI1SMEN rw		LPUART1SMEN rw

Toggle fields

LPUART1SMEN

Bit 0: Low power UART 1 clocks enable during Sleep and Stop modes.

SWPMI1SMEN

Bit 2: Single wire protocol clocks enable during Sleep and Stop modes.

LPTIM2SMEN

Bit 5: LPTIM2SMEN.

APB2SMENR

Offset: 0x80, size: 32, reset: 0x01677C01, access: read-write

0/8 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
										SAI1SMEN rw				TIM16SMEN rw	TIM15SMEN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	USART1SMEN rw		SPI1SMEN rw	TIM1SMEN rw	SDMMCSMEN rw										SYSCFGSMEN rw

Toggle fields

SYSCFGSMEN

Bit 0: SYSCFG clocks enable during Sleep and Stop modes.

SDMMCSMEN

Bit 10: SDMMC clocks enable during Sleep and Stop modes.

TIM1SMEN

Bit 11: TIM1 timer clocks enable during Sleep and Stop modes.

SPI1SMEN

Bit 12: SPI1 clocks enable during Sleep and Stop modes.

USART1SMEN

Bit 14: USART1clocks enable during Sleep and Stop modes.

TIM15SMEN

Bit 16: TIM15 timer clocks enable during Sleep and Stop modes.

TIM16SMEN

Bit 17: TIM16 timer clocks enable during Sleep and Stop modes.

SAI1SMEN

Bit 21: SAI1 clocks enable during Sleep and Stop modes.

CCIPR

Offset: 0x88, size: 32, reset: 0x00000000, access: read-write

11/13 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
	SWPMI1SEL rw	ADCSEL rw		CLK48SEL rw				SAI1SEL rw		LPTIM2SEL rw		LPTIM1SEL rw		I2C3SEL rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
I2C2SEL rw		I2C1SEL rw		LPUART1SEL rw						USART3SEL rw		USART2SEL rw		USART1SEL rw

Toggle fields

USART1SEL

Bits 0-1: USART1 clock source selection.

Allowed values:
0: PCLK: PCLK clock selected
1: SYSCLK: SYSCLK clock selected
2: HSI16: HSI16 clock selected
3: LSE: LSE clock selected

USART2SEL

Bits 2-3: USART2 clock source selection.

Allowed values:
0: PCLK: PCLK clock selected
1: SYSCLK: SYSCLK clock selected
2: HSI16: HSI16 clock selected
3: LSE: LSE clock selected

USART3SEL

Bits 4-5: USART3 clock source selection.

Allowed values:
0: PCLK: PCLK clock selected
1: SYSCLK: SYSCLK clock selected
2: HSI16: HSI16 clock selected
3: LSE: LSE clock selected

LPUART1SEL

Bits 10-11: LPUART1 clock source selection.

Allowed values:
0: PCLK: PCLK clock selected
1: SYSCLK: SYSCLK clock selected
2: HSI16: HSI16 clock selected
3: LSE: LSE clock selected

I2C1SEL

Bits 12-13: I2C1 clock source selection.

Allowed values:
0: PCLK: PCLK clock selected
1: SYSCLK: SYSCLK clock selected
2: HSI16: HSI16 clock selected

I2C2SEL

Bits 14-15: I2C2 clock source selection.

Allowed values:
0: PCLK: PCLK clock selected
1: SYSCLK: SYSCLK clock selected
2: HSI16: HSI16 clock selected

I2C3SEL

Bits 16-17: I2C3 clock source selection.

Allowed values:
0: PCLK: PCLK clock selected
1: SYSCLK: SYSCLK clock selected
2: HSI16: HSI16 clock selected

LPTIM1SEL

Bits 18-19: Low power timer 1 clock source selection.

Allowed values:
0: PCLK: PCLK clock selected
1: LSI: LSI clock selected
2: HSI16: HSI16 clock selected
3: LSE: LSE clock selected

LPTIM2SEL

Bits 20-21: Low power timer 2 clock source selection.

Allowed values:
0: PCLK: PCLK clock selected
1: LSI: LSI clock selected
2: HSI16: HSI16 clock selected
3: LSE: LSE clock selected

SAI1SEL

Bits 22-23: SAI1 clock source selection.

CLK48SEL

Bits 26-27: 48 MHz clock source selection.

Allowed values:
0: HSI48: HSI48 clock selected (only for STM32L41x/L42x/L43x/L44x/L45x/L46x/L49x/L4Ax devices, otherwise no clock selected)
1: PLLSAI1: PLLSAI1 clock selected
2: PLL: PLL clock selected
3: MSI: MSI clock selected

ADCSEL

Bits 28-29: ADCs clock source selection.

Allowed values:
0: NoClock: No clock selected
1: PLLSAI1: PLLSAI1 clock selected
2: PLLSAI2: PLLSAI2 clock selected (only for STM32L47x/L48x/L49x/L4Ax devices)
3: SYSCLK: SYSCLK clock selected

SWPMI1SEL

Bit 30: SWPMI1 clock source selection.

BDCR

Offset: 0x90, size: 32, reset: 0x00000000, access: Unspecified

4/11 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
						LSCOSEL rw	LSCOEN rw								BDRST rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RTCEN rw						RTCSEL rw			LSECSSD r	LSECSSON rw	LSEDRV rw		LSEBYP rw	LSERDY r	LSEON rw

Toggle fields

LSEON

Bit 0: LSE oscillator enable.

LSERDY

Bit 1: LSE oscillator ready.

LSEBYP

Bit 2: LSE oscillator bypass.

LSEDRV

Bits 3-4: SE oscillator drive capability.

LSECSSON

Bit 5: LSECSSON.

LSECSSD

Bit 6: LSECSSD.

RTCSEL

Bits 8-9: RTC clock source selection.

Allowed values:
0: NoClock: No clock
1: LSE: LSE oscillator clock selected
2: LSI: LSI oscillator clock selected
3: HSE: HSE oscillator clock divided by 32 selected

RTCEN

Bit 15: RTC clock enable.

Allowed values:
0: Disabled: RTC clock disabled
1: Enabled: RTC clock enabled

BDRST

Bit 16: Backup domain software reset.

LSCOEN

Bit 24: Low speed clock output enable.

LSCOSEL

Bit 25: Low speed clock output selection.

CSR

Offset: 0x94, size: 32, reset: 0x0C000600, access: Unspecified

9/12 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
LPWRSTF r	WWDGRSTF r	IWDGRSTF r	SFTRSTF r	BORRSTF r	PINRSTF r	OBLRSTF r	FIREWALLRSTF r	RMVF rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				MSISRANGE rw										LSIRDY r	LSION rw

Toggle fields

LSION

Bit 0: LSI oscillator enable.

LSIRDY

Bit 1: LSI oscillator ready.

MSISRANGE

Bits 8-11: SI range after Standby mode.

RMVF

Bit 23: Remove reset flag.

FIREWALLRSTF

Bit 24: Firewall reset flag.

OBLRSTF

Bit 25: Option byte loader reset flag.

PINRSTF

Bit 26: Pin reset flag.

BORRSTF

Bit 27: BOR flag.

SFTRSTF

Bit 28: Software reset flag.

IWDGRSTF

Bit 29: Independent window watchdog reset flag.

WWDGRSTF

Bit 30: Window watchdog reset flag.

LPWRSTF

Bit 31: Low-power reset flag.

CRRCR

Clock recovery RC register

Offset: 0x98, size: 32, reset: 0x00000000, access: Unspecified

2/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
HSI48CAL r														HSI48RDY r	HSI48ON rw

Toggle fields

HSI48ON

Bit 0: Set and cleared by software. Cleared by hardware to stop the HSI48 when entering in Stop, Standby or Shutdown modes..

HSI48RDY

Bit 1: Set by hardware to indicate that HSI48 oscillator is stable. This bit is set only when HSI48 is enabled by software by setting HSI48ON..

HSI48CAL

Bits 7-15: These bits are initialized at startup with the factory-programmed HSI48 calibration trim value..

RNG

0x50060800: Random number generator

4/8 fields covered.

Toggle register map

Offset	Name	31	15	6	5	3	2	1	0
0x0	CR					IE	RNGEN
0x4	SR			SEIS	CEIS		SECS	CECS	DRDY
0x8	DR	RNDATA	RNDATA

Toggle registers

CR

control register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
												IE rw	RNGEN rw

Toggle fields

RNGEN

Bit 2: Random number generator enable.

IE

Bit 3: Interrupt enable.

SR

status register

Offset: 0x4, size: 32, reset: 0x00000000, access: Unspecified

3/5 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									SEIS rw	CEIS rw			SECS r	CECS r	DRDY r

Toggle fields

DRDY

Bit 0: Data ready.

CECS

Bit 1: Clock error current status.

SECS

Bit 2: Seed error current status.

CEIS

Bit 5: Clock error interrupt status.

SEIS

Bit 6: Seed error interrupt status.

DR

data register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
RNDATA r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RNDATA r

Toggle fields

RNDATA

Bits 0-31: Random data.

RTC

0x40002800: Real-time clock

8/165 fields covered.

Toggle register map

Offset	Name	31	30	29	27	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	TR							PM	HT		HU					MNT			MNU					ST			SU
0x4	DR						YT				YU				WDU			MT	MU						DT		DU
0x8	CR					ITSE	COE	OSEL		POL	COSEL	BKP	SUB1H	ADD1H	TSIE	WUTIE	ALRBIE	ALRAIE	TSE	WUTE	ALRBE	ALRAE		FMT	BYPSHAD	REFCKON	TSEDGE	WUCKSEL
0xc	ISR													RECALPF	TAMP3F	TAMP2F	TAMP1F	TSOVF	TSF	WUTF	ALRBF	ALRAF	INIT	INITF	RSF	INITS	SHPF	WUTWF	ALRBWF	ALRAWF
0x10	PRER							PREDIV_A								PREDIV_S
0x14	WUTR														WUT
0x1c	ALRM[A]R	MSK4	WDSEL	DT	DU		MSK3	PM	HT		HU				MSK2	MNT			MNU				MSK1	ST			SU
0x20	ALRM[B]R	MSK4	WDSEL	DT	DU		MSK3	PM	HT		HU				MSK2	MNT			MNU				MSK1	ST			SU
0x24	WPR																						KEY
0x28	SSR														SS
0x2c	SHIFTR	ADD1S														SUBFS
0x30	TSTR							PM	HT		HU					MNT			MNU					ST			SU
0x34	TSDR						YT				YU				WDU			MT	MU						DT		DU
0x38	TSSSR														SS
0x3c	CALR														CALP	CALW8	CALW16					CALM
0x40	TAMPCR					TAMP3MF	TAMP3NOERASE	TAMP3IE	TAMP2MF	TAMP2NOERASE	TAMP2IE	TAMP1MF	TAMP1NOERASE	TAMP1IE	TAMPPUDIS	TAMPPRCH		TAMPFLT		TAMPFREQ			TAMPTS	TAMP3TRG	TAMP3E	TAMP2TRG	TAMP2E	TAMPIE	TAMP1TRG	TAMP1E
0x44	ALRM[A]SSR				MASKSS											SS
0x48	ALRM[B]SSR				MASKSS											SS
0x4c	OR																												RTC_OUT_RMP	RTC_ALARM_TYPE
0x50	BKP[0]R	BKP													BKP
0x54	BKP[1]R	BKP													BKP
0x58	BKP[2]R	BKP													BKP
0x5c	BKP[3]R	BKP													BKP
0x60	BKP[4]R	BKP													BKP
0x64	BKP[5]R	BKP													BKP
0x68	BKP[6]R	BKP													BKP
0x6c	BKP[7]R	BKP													BKP
0x70	BKP[8]R	BKP													BKP
0x74	BKP[9]R	BKP													BKP
0x78	BKP[10]R	BKP													BKP
0x7c	BKP[11]R	BKP													BKP
0x80	BKP[12]R	BKP													BKP
0x84	BKP[13]R	BKP													BKP
0x88	BKP[14]R	BKP													BKP
0x8c	BKP[15]R	BKP													BKP
0x90	BKP[16]R	BKP													BKP
0x94	BKP[17]R	BKP													BKP
0x98	BKP[18]R	BKP													BKP
0x9c	BKP[19]R	BKP													BKP
0xa0	BKP[20]R	BKP													BKP
0xa4	BKP[21]R	BKP													BKP
0xa8	BKP[22]R	BKP													BKP
0xac	BKP[23]R	BKP													BKP
0xb0	BKP[24]R	BKP													BKP
0xb4	BKP[25]R	BKP													BKP
0xb8	BKP[26]R	BKP													BKP
0xbc	BKP[27]R	BKP													BKP
0xc0	BKP[28]R	BKP													BKP
0xc4	BKP[29]R	BKP													BKP
0xc8	BKP[30]R	BKP													BKP
0xcc	BKP[31]R	BKP													BKP

Toggle registers

TR

time register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/7 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
									PM rw	HT rw		HU rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	MNT rw			MNU rw					ST rw			SU rw

Toggle fields

SU

Bits 0-3: Second units in BCD format.

ST

Bits 4-6: Second tens in BCD format.

MNU

Bits 8-11: Minute units in BCD format.

MNT

Bits 12-14: Minute tens in BCD format.

HU

Bits 16-19: Hour units in BCD format.

HT

Bits 20-21: Hour tens in BCD format.

PM

Bit 22: AM/PM notation.

DR

date register

Offset: 0x4, size: 32, reset: 0x00002101, access: read-write

0/7 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								YT rw				YU rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
WDU rw			MT rw	MU rw						DT rw		DU rw

Toggle fields

DU

Bits 0-3: Date units in BCD format.

DT

Bits 4-5: Date tens in BCD format.

MU

Bits 8-11: Month units in BCD format.

MT

Bit 12: Month tens in BCD format.

WDU

Bits 13-15: Week day units.

YU

Bits 16-19: Year units in BCD format.

YT

Bits 20-23: Year tens in BCD format.

CR

control register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/21 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
							ITSE rw	COE rw	OSEL rw		POL rw	COSEL rw	BKP rw	SUB1H rw	ADD1H rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
TSIE rw	WUTIE rw	ALRBIE rw	ALRAIE rw	TSE rw	WUTE rw	ALRBE rw	ALRAE rw		FMT rw	BYPSHAD rw	REFCKON rw	TSEDGE rw	WUCKSEL rw

Toggle fields

WUCKSEL

Bits 0-2: Wakeup clock selection.

TSEDGE

Bit 3: Time-stamp event active edge.

REFCKON

Bit 4: Reference clock detection enable (50 or 60 Hz).

BYPSHAD

Bit 5: Bypass the shadow registers.

FMT

Bit 6: Hour format.

ALRAE

Bit 8: Alarm A enable.

ALRBE

Bit 9: Alarm B enable.

WUTE

Bit 10: Wakeup timer enable.

TSE

Bit 11: Time stamp enable.

ALRAIE

Bit 12: Alarm A interrupt enable.

ALRBIE

Bit 13: Alarm B interrupt enable.

WUTIE

Bit 14: Wakeup timer interrupt enable.

TSIE

Bit 15: Time-stamp interrupt enable.

ADD1H

Bit 16: Add 1 hour (summer time change).

SUB1H

Bit 17: Subtract 1 hour (winter time change).

BKP

Bit 18: Backup.

COSEL

Bit 19: Calibration output selection.

POL

Bit 20: Output polarity.

OSEL

Bits 21-22: Output selection.

COE

Bit 23: Calibration output enable.

ITSE

Bit 24: timestamp on internal event enable.

ISR

initialization and status register

Offset: 0xc, size: 32, reset: 0x00000007, access: Unspecified

6/17 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
															RECALPF r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
TAMP3F rw	TAMP2F rw	TAMP1F rw	TSOVF rw	TSF rw	WUTF rw	ALRBF rw	ALRAF rw	INIT rw	INITF r	RSF rw	INITS r	SHPF rw	WUTWF r	ALRBWF r	ALRAWF r

Toggle fields

ALRAWF

Bit 0: Alarm A write flag.

ALRBWF

Bit 1: Alarm B write flag.

WUTWF

Bit 2: Wakeup timer write flag.

SHPF

Bit 3: Shift operation pending.

INITS

Bit 4: Initialization status flag.

RSF

Bit 5: Registers synchronization flag.

INITF

Bit 6: Initialization flag.

INIT

Bit 7: Initialization mode.

ALRAF

Bit 8: Alarm A flag.

ALRBF

Bit 9: Alarm B flag.

WUTF

Bit 10: Wakeup timer flag.

TSF

Bit 11: Time-stamp flag.

TSOVF

Bit 12: Time-stamp overflow flag.

TAMP1F

Bit 13: Tamper detection flag.

TAMP2F

Bit 14: RTC_TAMP2 detection flag.

TAMP3F

Bit 15: RTC_TAMP3 detection flag.

RECALPF

Bit 16: Recalibration pending Flag.

PRER

prescaler register

Offset: 0x10, size: 32, reset: 0x007F00FF, access: read-write

0/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
									PREDIV_A rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	PREDIV_S rw

Toggle fields

PREDIV_S

Bits 0-14: Synchronous prescaler factor.

PREDIV_A

Bits 16-22: Asynchronous prescaler factor.

WUTR

wakeup timer register

Offset: 0x14, size: 32, reset: 0x0000FFFF, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
WUT rw

Toggle fields

WUT

Bits 0-15: Wakeup auto-reload value bits.

ALRM[A]R

Alarm A register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

0/14 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MSK4 rw	WDSEL rw	DT rw		DU rw				MSK3 rw	PM rw	HT rw		HU rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MSK2 rw	MNT rw			MNU rw				MSK1 rw	ST rw			SU rw

Toggle fields

SU

Bits 0-3: Second units in BCD format.

ST

Bits 4-6: Second tens in BCD format.

MSK1

Bit 7: Alarm seconds mask.

MNU

Bits 8-11: Minute units in BCD format.

MNT

Bits 12-14: Minute tens in BCD format.

MSK2

Bit 15: Alarm minutes mask.

HU

Bits 16-19: Hour units in BCD format.

HT

Bits 20-21: Hour tens in BCD format.

PM

Bit 22: AM/PM notation.

MSK3

Bit 23: Alarm hours mask.

DU

Bits 24-27: Date units or day in BCD format.

DT

Bits 28-29: Date tens in BCD format.

WDSEL

Bit 30: Week day selection.

MSK4

Bit 31: Alarm date mask.

ALRM[B]R

Alarm B register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

0/14 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MSK4 rw	WDSEL rw	DT rw		DU rw				MSK3 rw	PM rw	HT rw		HU rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MSK2 rw	MNT rw			MNU rw				MSK1 rw	ST rw			SU rw

Toggle fields

SU

Bits 0-3: Second units in BCD format.

ST

Bits 4-6: Second tens in BCD format.

MSK1

Bit 7: Alarm seconds mask.

MNU

Bits 8-11: Minute units in BCD format.

MNT

Bits 12-14: Minute tens in BCD format.

MSK2

Bit 15: Alarm minutes mask.

HU

Bits 16-19: Hour units in BCD format.

HT

Bits 20-21: Hour tens in BCD format.

PM

Bit 22: AM/PM notation.

MSK3

Bit 23: Alarm hours mask.

DU

Bits 24-27: Date units or day in BCD format.

DT

Bits 28-29: Date tens in BCD format.

WDSEL

Bit 30: Week day selection.

MSK4

Bit 31: Alarm date mask.

WPR

write protection register

Offset: 0x24, size: 32, reset: 0x00000000, access: write-only

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								KEY w

Toggle fields

KEY

Bits 0-7: Write protection key.

SSR

sub second register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SS r

Toggle fields

SS

Bits 0-15: Sub second value.

SHIFTR

shift control register

Offset: 0x2c, size: 32, reset: 0x00000000, access: write-only

0/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
ADD1S w
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	SUBFS w

Toggle fields

SUBFS

Bits 0-14: Subtract a fraction of a second.

ADD1S

Bit 31: Add one second.

TSTR

time stamp time register

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

0/7 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
									PM rw	HT rw		HU rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	MNT rw			MNU rw					ST rw			SU rw

Toggle fields

SU

Bits 0-3: Second units in BCD format.

ST

Bits 4-6: Second tens in BCD format.

MNU

Bits 8-11: Minute units in BCD format.

MNT

Bits 12-14: Minute tens in BCD format.

HU

Bits 16-19: Hour units in BCD format.

HT

Bits 20-21: Hour tens in BCD format.

PM

Bit 22: AM/PM notation.

TSDR

time stamp date register

Offset: 0x34, size: 32, reset: 0x00002101, access: read-write

0/7 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								YT rw				YU rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
WDU rw			MT rw	MU rw						DT rw		DU rw

Toggle fields

DU

Bits 0-3: Date units in BCD format.

DT

Bits 4-5: Date tens in BCD format.

MU

Bits 8-11: Month units in BCD format.

MT

Bit 12: Month tens in BCD format.

WDU

Bits 13-15: Week day units.

YU

Bits 16-19: Year units in BCD format.

YT

Bits 20-23: Year tens in BCD format.

TSSSR

timestamp sub second register

Offset: 0x38, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SS r

Toggle fields

SS

Bits 0-15: Sub second value.

CALR

calibration register

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CALP rw	CALW8 rw	CALW16 rw					CALM rw

Toggle fields

CALM

Bits 0-8: Calibration minus.

CALW16

Bit 13: Use a 16-second calibration cycle period.

CALW8

Bit 14: Use an 8-second calibration cycle period.

CALP

Bit 15: Increase frequency of RTC by 488.5 ppm.

TAMPCR

tamper configuration register

Offset: 0x40, size: 32, reset: 0x00000000, access: read-write

0/21 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
							TAMP3MF rw	TAMP3NOERASE rw	TAMP3IE rw	TAMP2MF rw	TAMP2NOERASE rw	TAMP2IE rw	TAMP1MF rw	TAMP1NOERASE rw	TAMP1IE rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
TAMPPUDIS rw	TAMPPRCH rw		TAMPFLT rw		TAMPFREQ rw			TAMPTS rw	TAMP3TRG rw	TAMP3E rw	TAMP2TRG rw	TAMP2E rw	TAMPIE rw	TAMP1TRG rw	TAMP1E rw

Toggle fields

TAMP1E

Bit 0: Tamper 1 detection enable.

TAMP1TRG

Bit 1: Active level for tamper 1.

TAMPIE

Bit 2: Tamper interrupt enable.

TAMP2E

Bit 3: Tamper 2 detection enable.

TAMP2TRG

Bit 4: Active level for tamper 2.

TAMP3E

Bit 5: Tamper 3 detection enable.

TAMP3TRG

Bit 6: Active level for tamper 3.

TAMPTS

Bit 7: Activate timestamp on tamper detection event.

TAMPFREQ

Bits 8-10: Tamper sampling frequency.

TAMPFLT

Bits 11-12: Tamper filter count.

TAMPPRCH

Bits 13-14: Tamper precharge duration.

TAMPPUDIS

Bit 15: TAMPER pull-up disable.

TAMP1IE

Bit 16: Tamper 1 interrupt enable.

TAMP1NOERASE

Bit 17: Tamper 1 no erase.

TAMP1MF

Bit 18: Tamper 1 mask flag.

TAMP2IE

Bit 19: Tamper 2 interrupt enable.

TAMP2NOERASE

Bit 20: Tamper 2 no erase.

TAMP2MF

Bit 21: Tamper 2 mask flag.

TAMP3IE

Bit 22: Tamper 3 interrupt enable.

TAMP3NOERASE

Bit 23: Tamper 3 no erase.

TAMP3MF

Bit 24: Tamper 3 mask flag.

ALRM[A]SSR

Alarm A sub-second register

Offset: 0x44, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
				MASKSS rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	SS rw

Toggle fields

SS

Bits 0-14: Sub seconds value.

MASKSS

Bits 24-27: Mask the most-significant bits starting at this bit.

ALRM[B]SSR

Alarm B sub-second register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
				MASKSS rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	SS rw

Toggle fields

SS

Bits 0-14: Sub seconds value.

MASKSS

Bits 24-27: Mask the most-significant bits starting at this bit.

OR

option register

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
														RTC_OUT_RMP rw	RTC_ALARM_TYPE rw

Toggle fields

RTC_ALARM_TYPE

Bit 0: RTC_ALARM on PC13 output type.

RTC_OUT_RMP

Bit 1: RTC_OUT remap.

BKP[0]R

backup register

Offset: 0x50, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[1]R

backup register

Offset: 0x54, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[2]R

backup register

Offset: 0x58, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[3]R

backup register

Offset: 0x5c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[4]R

backup register

Offset: 0x60, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[5]R

backup register

Offset: 0x64, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[6]R

backup register

Offset: 0x68, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[7]R

backup register

Offset: 0x6c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[8]R

backup register

Offset: 0x70, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[9]R

backup register

Offset: 0x74, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[10]R

backup register

Offset: 0x78, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[11]R

backup register

Offset: 0x7c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[12]R

backup register

Offset: 0x80, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[13]R

backup register

Offset: 0x84, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[14]R

backup register

Offset: 0x88, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[15]R

backup register

Offset: 0x8c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[16]R

backup register

Offset: 0x90, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[17]R

backup register

Offset: 0x94, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[18]R

backup register

Offset: 0x98, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[19]R

backup register

Offset: 0x9c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[20]R

backup register

Offset: 0xa0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[21]R

backup register

Offset: 0xa4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[22]R

backup register

Offset: 0xa8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[23]R

backup register

Offset: 0xac, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[24]R

backup register

Offset: 0xb0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[25]R

backup register

Offset: 0xb4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[26]R

backup register

Offset: 0xb8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[27]R

backup register

Offset: 0xbc, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[28]R

backup register

Offset: 0xc0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[29]R

backup register

Offset: 0xc4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[30]R

backup register

Offset: 0xc8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

BKP[31]R

backup register

Offset: 0xcc, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BKP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BKP rw

Toggle fields

BKP

Bits 0-31: BKP.

SAI1

0x40015400: Serial audio interface

84/102 fields covered.

Toggle register map

Offset	Name	31	23	19	18	17	16	15	14	13	12	11	9	8	7	6	5	4	3	2	1	0
0x4	CR1 [A]		MCKDIV	NODIV		DMAEN	SAIEN			OUTDRIV	MONO	SYNCEN	CKSTR	LSBFIRST	DS				PRTCFG		MODE
0x8	CR2 [A]							COMP		CPL	MUTECNT					MUTEVAL	MUTE	TRIS	FFLUSH	FTH
0xc	FRCR [A]				FSOFF	FSPOL	FSDEF		FSALL						FRL
0x10	SLOTR [A]	SLOTEN										NBSLOT			SLOTSZ			FBOFF
0x14	IM [A]															LFSDETIE	AFSDETIE	CNRDYIE	FREQIE	WCKCFGIE	MUTEDETIE	OVRUDRIE
0x18	SR [A]				FLVL											LFSDET	AFSDET	CNRDY	FREQ	WCKCFG	MUTEDET	OVRUDR
0x1c	CLRFR [A]															CLFSDET	CAFSDET	CCNRDY		CWCKCFG	CMUTEDET	COVRUDR
0x20	DR [A]	DATA						DATA
0x24	CR1 [B]		MCKDIV	NODIV		DMAEN	SAIEN			OUTDRIV	MONO	SYNCEN	CKSTR	LSBFIRST	DS				PRTCFG		MODE
0x28	CR2 [B]							COMP		CPL	MUTECNT					MUTEVAL	MUTE	TRIS	FFLUSH	FTH
0x2c	FRCR [B]				FSOFF	FSPOL	FSDEF		FSALL						FRL
0x30	SLOTR [B]	SLOTEN										NBSLOT			SLOTSZ			FBOFF
0x34	IM [B]															LFSDETIE	AFSDETIE	CNRDYIE	FREQIE	WCKCFGIE	MUTEDETIE	OVRUDRIE
0x38	SR [B]				FLVL											LFSDET	AFSDET	CNRDY	FREQ	WCKCFG	MUTEDET	OVRUDR
0x3c	CLRFR [B]															CLFSDET	CAFSDET	CCNRDY		CWCKCFG	CMUTEDET	COVRUDR
0x40	DR [B]	DATA						DATA

Toggle registers

CR1 [A]

AConfiguration register 1

Offset: 0x4, size: 32, reset: 0x00000040, access: read-write

11/12 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								MCKDIV rw				NODIV rw		DMAEN rw	SAIEN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		OUTDRIV rw	MONO rw	SYNCEN rw		CKSTR rw	LSBFIRST rw	DS rw				PRTCFG rw		MODE rw

Toggle fields

MODE

Bits 0-1: Audio block mode.

Allowed values:
0: MasterTx: Master transmitter
1: MasterRx: Master receiver
2: SlaveTx: Slave transmitter
3: SlaveRx: Slave receiver

PRTCFG

Bits 2-3: Protocol configuration.

Allowed values:
0: Free: Free protocol. Free protocol allows to use the powerful configuration of the audio block to address a specific audio protocol
1: Spdif: SPDIF protocol
2: Ac97: AC’97 protocol

DS

Bits 5-7: Data size.

Allowed values:
2: Bit8: 8 bits
3: Bit10: 10 bits
4: Bit16: 16 bits
5: Bit20: 20 bits
6: Bit24: 24 bits
7: Bit32: 32 bits

LSBFIRST

Bit 8: Least significant bit first.

Allowed values:
0: MsbFirst: Data are transferred with MSB first
1: LsbFirst: Data are transferred with LSB first

CKSTR

Bit 9: Clock strobing edge.

Allowed values:
0: FallingEdge: Data strobing edge is falling edge of SCK
1: RisingEdge: Data strobing edge is rising edge of SCK

SYNCEN

Bits 10-11: Synchronization enable.

Allowed values:
0: Asynchronous: audio sub-block in asynchronous mode
1: Internal: audio sub-block is synchronous with the other internal audio sub-block. In this case, the audio sub-block must be configured in slave mode
2: External: audio sub-block is synchronous with an external SAI embedded peripheral. In this case the audio sub-block should be configured in Slave mode

MONO

Bit 12: Mono mode.

Allowed values:
0: Stereo: Stereo mode
1: Mono: Mono mode

OUTDRIV

Bit 13: Output drive.

Allowed values:
0: OnStart: Audio block output driven when SAIEN is set
1: Immediately: Audio block output driven immediately after the setting of this bit

SAIEN

Bit 16: Audio block A enable.

Allowed values:
0: Disabled: SAI audio block disabled
1: Enabled: SAI audio block enabled

DMAEN

Bit 17: DMA enable.

Allowed values:
0: Disabled: DMA disabled
1: Enabled: DMA enabled

NODIV

Bit 19: No divider.

Allowed values:
0: MasterClock: MCLK output is enabled. Forces the ratio between FS and MCLK to 256 or 512 according to the OSR value
1: NoDiv: MCLK output enable set by the MCKEN bit (where present, else 0). Ratio between FS and MCLK depends on FRL.

MCKDIV

Bits 20-23: Master clock divider.

CR2 [A]

AConfiguration register 2

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

6/8 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
COMP rw		CPL rw	MUTECNT rw						MUTEVAL rw	MUTE rw	TRIS rw	FFLUSH w	FTH rw

Toggle fields

FTH

Bits 0-2: FIFO threshold.

Allowed values:
0: Empty: FIFO empty
1: Quarter1: 1⁄4 FIFO
2: Quarter2: 1⁄2 FIFO
3: Quarter3: 3⁄4 FIFO
4: Full: FIFO full

FFLUSH

Bit 3: FIFO flush.

Allowed values:
0: NoFlush: No FIFO flush
1: Flush: FIFO flush. Programming this bit to 1 triggers the FIFO Flush. All the internal FIFO pointers (read and write) are cleared

TRIS

Bit 4: Tristate management on data line.

MUTE

Bit 5: Mute.

Allowed values:
0: Disabled: No mute mode
1: Enabled: Mute mode enabled

MUTEVAL

Bit 6: Mute value.

Allowed values:
0: SendZero: Bit value 0 is sent during the mute mode
1: SendLast: Last values are sent during the mute mode

MUTECNT

Bits 7-12: Mute counter.

CPL

Bit 13: Complement bit.

Allowed values:
0: OnesComplement: 1’s complement representation
1: TwosComplement: 2’s complement representation

COMP

Bits 14-15: Companding mode.

Allowed values:
0: NoCompanding: No companding algorithm
2: MuLaw: μ-Law algorithm
3: ALaw: A-Law algorithm

FRCR [A]

AFRCR

Offset: 0xc, size: 32, reset: 0x00000007, access: read-write

2/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
													FSOFF rw	FSPOL rw	FSDEF rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	FSALL rw							FRL rw

Toggle fields

FRL

Bits 0-7: Frame length.

FSALL

Bits 8-14: Frame synchronization active level length.

FSDEF

Bit 16: Frame synchronization definition.

FSPOL

Bit 17: Frame synchronization polarity.

Allowed values:
0: FallingEdge: FS is active low (falling edge)
1: RisingEdge: FS is active high (rising edge)

FSOFF

Bit 18: Frame synchronization offset.

Allowed values:
0: OnFirst: FS is asserted on the first bit of the slot 0
1: BeforeFirst: FS is asserted one bit before the first bit of the slot 0

SLOTR [A]

ASlot register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

2/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
SLOTEN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				NBSLOT rw				SLOTSZ rw			FBOFF rw

Toggle fields

FBOFF

Bits 0-4: First bit offset.

SLOTSZ

Bits 6-7: Slot size.

Allowed values:
0: DataSize: The slot size is equivalent to the data size (specified in DS[3:0] in the SAI_xCR1 register)
1: Bit16: 16-bit
2: Bit32: 32-bit

NBSLOT

Bits 8-11: Number of slots in an audio frame.

SLOTEN

Bits 16-31: Slot enable.

Allowed values:
0: Inactive: Inactive slot
1: Active: Active slot

IM [A]

AInterrupt mask register2

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

7/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									LFSDETIE rw	AFSDETIE rw	CNRDYIE rw	FREQIE rw	WCKCFGIE rw	MUTEDETIE rw	OVRUDRIE rw

Toggle fields

OVRUDRIE

Bit 0: Overrun/underrun interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is enabled

MUTEDETIE

Bit 1: Mute detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is enabled

WCKCFGIE

Bit 2: Wrong clock configuration interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is enabled

FREQIE

Bit 3: FIFO request interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is enabled

CNRDYIE

Bit 4: Codec not ready interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is enabled

AFSDETIE

Bit 5: Anticipated frame synchronization detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is enabled

LFSDETIE

Bit 6: Late frame synchronization detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is enabled

SR [A]

AStatus register

Offset: 0x18, size: 32, reset: 0x00000008, access: read-only

8/8 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
													FLVL r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									LFSDET r	AFSDET r	CNRDY r	FREQ r	WCKCFG r	MUTEDET r	OVRUDR r

Toggle fields

OVRUDR

Bit 0: Overrun / underrun.

Allowed values:
0: NoError: No overrun/underrun error
1: Overrun: Overrun/underrun error detection

MUTEDET

Bit 1: Mute detection.

Allowed values:
0: NoMute: No MUTE detection on the SD input line
1: Mute: MUTE value detected on the SD input line (0 value) for a specified number of consecutive audio frame

WCKCFG

Bit 2: Wrong clock configuration flag. This bit is read only.

Allowed values:
0: Correct: Clock configuration is correct
1: Wrong: Clock configuration does not respect the rule concerning the frame length specification

FREQ

Bit 3: FIFO request.

Allowed values:
0: NoRequest: No FIFO request
1: Request: FIFO request to read or to write the SAI_xDR

CNRDY

Bit 4: Codec not ready.

Allowed values:
0: Ready: External AC’97 Codec is ready
1: NotReady: External AC’97 Codec is not ready

AFSDET

Bit 5: Anticipated frame synchronization detection.

Allowed values:
0: NoError: No error
1: EarlySync: Frame synchronization signal is detected earlier than expected

LFSDET

Bit 6: Late frame synchronization detection.

Allowed values:
0: NoError: No error
1: NoSync: Frame synchronization signal is not present at the right time

FLVL

Bits 16-18: FIFO level threshold.

Allowed values:
0: Empty: FIFO empty
1: Quarter1: FIFO <= 1⁄4 but not empty
2: Quarter2: 1⁄4 < FIFO <= 1⁄2
3: Quarter3: 1⁄2 < FIFO <= 3⁄4
4: Quarter4: 3⁄4 < FIFO but not full
5: Full: FIFO full

CLRFR [A]

AClear flag register

Offset: 0x1c, size: 32, reset: 0x00000000, access: write-only

6/6 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									CLFSDET w	CAFSDET w	CCNRDY w		CWCKCFG w	CMUTEDET w	COVRUDR w

Toggle fields

COVRUDR

Bit 0: Clear overrun / underrun.

Allowed values:
1: Clear: Clears the OVRUDR flag

CMUTEDET

Bit 1: Mute detection flag.

Allowed values:
1: Clear: Clears the MUTEDET flag

CWCKCFG

Bit 2: Clear wrong clock configuration flag.

Allowed values:
1: Clear: Clears the WCKCFG flag

CCNRDY

Bit 4: Clear codec not ready flag.

Allowed values:
1: Clear: Clears the CNRDY flag

CAFSDET

Bit 5: Clear anticipated frame synchronization detection flag.

Allowed values:
1: Clear: Clears the AFSDET flag

CLFSDET

Bit 6: Clear late frame synchronization detection flag.

Allowed values:
1: Clear: Clears the LFSDET flag

DR [A]

AData register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
DATA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DATA rw

Toggle fields

DATA

Bits 0-31: Data.

CR1 [B]

AConfiguration register 1

Offset: 0x24, size: 32, reset: 0x00000040, access: read-write

11/12 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								MCKDIV rw				NODIV rw		DMAEN rw	SAIEN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		OUTDRIV rw	MONO rw	SYNCEN rw		CKSTR rw	LSBFIRST rw	DS rw				PRTCFG rw		MODE rw

Toggle fields

MODE

Bits 0-1: Audio block mode.

Allowed values:
0: MasterTx: Master transmitter
1: MasterRx: Master receiver
2: SlaveTx: Slave transmitter
3: SlaveRx: Slave receiver

PRTCFG

Bits 2-3: Protocol configuration.

Allowed values:
0: Free: Free protocol. Free protocol allows to use the powerful configuration of the audio block to address a specific audio protocol
1: Spdif: SPDIF protocol
2: Ac97: AC’97 protocol

DS

Bits 5-7: Data size.

Allowed values:
2: Bit8: 8 bits
3: Bit10: 10 bits
4: Bit16: 16 bits
5: Bit20: 20 bits
6: Bit24: 24 bits
7: Bit32: 32 bits

LSBFIRST

Bit 8: Least significant bit first.

Allowed values:
0: MsbFirst: Data are transferred with MSB first
1: LsbFirst: Data are transferred with LSB first

CKSTR

Bit 9: Clock strobing edge.

Allowed values:
0: FallingEdge: Data strobing edge is falling edge of SCK
1: RisingEdge: Data strobing edge is rising edge of SCK

SYNCEN

Bits 10-11: Synchronization enable.

Allowed values:
0: Asynchronous: audio sub-block in asynchronous mode
1: Internal: audio sub-block is synchronous with the other internal audio sub-block. In this case, the audio sub-block must be configured in slave mode
2: External: audio sub-block is synchronous with an external SAI embedded peripheral. In this case the audio sub-block should be configured in Slave mode

MONO

Bit 12: Mono mode.

Allowed values:
0: Stereo: Stereo mode
1: Mono: Mono mode

OUTDRIV

Bit 13: Output drive.

Allowed values:
0: OnStart: Audio block output driven when SAIEN is set
1: Immediately: Audio block output driven immediately after the setting of this bit

SAIEN

Bit 16: Audio block A enable.

Allowed values:
0: Disabled: SAI audio block disabled
1: Enabled: SAI audio block enabled

DMAEN

Bit 17: DMA enable.

Allowed values:
0: Disabled: DMA disabled
1: Enabled: DMA enabled

NODIV

Bit 19: No divider.

Allowed values:
0: MasterClock: MCLK output is enabled. Forces the ratio between FS and MCLK to 256 or 512 according to the OSR value
1: NoDiv: MCLK output enable set by the MCKEN bit (where present, else 0). Ratio between FS and MCLK depends on FRL.

MCKDIV

Bits 20-23: Master clock divider.

CR2 [B]

AConfiguration register 2

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

6/8 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
COMP rw		CPL rw	MUTECNT rw						MUTEVAL rw	MUTE rw	TRIS rw	FFLUSH w	FTH rw

Toggle fields

FTH

Bits 0-2: FIFO threshold.

Allowed values:
0: Empty: FIFO empty
1: Quarter1: 1⁄4 FIFO
2: Quarter2: 1⁄2 FIFO
3: Quarter3: 3⁄4 FIFO
4: Full: FIFO full

FFLUSH

Bit 3: FIFO flush.

Allowed values:
0: NoFlush: No FIFO flush
1: Flush: FIFO flush. Programming this bit to 1 triggers the FIFO Flush. All the internal FIFO pointers (read and write) are cleared

TRIS

Bit 4: Tristate management on data line.

MUTE

Bit 5: Mute.

Allowed values:
0: Disabled: No mute mode
1: Enabled: Mute mode enabled

MUTEVAL

Bit 6: Mute value.

Allowed values:
0: SendZero: Bit value 0 is sent during the mute mode
1: SendLast: Last values are sent during the mute mode

MUTECNT

Bits 7-12: Mute counter.

CPL

Bit 13: Complement bit.

Allowed values:
0: OnesComplement: 1’s complement representation
1: TwosComplement: 2’s complement representation

COMP

Bits 14-15: Companding mode.

Allowed values:
0: NoCompanding: No companding algorithm
2: MuLaw: μ-Law algorithm
3: ALaw: A-Law algorithm

FRCR [B]

AFRCR

Offset: 0x2c, size: 32, reset: 0x00000007, access: read-write

2/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
													FSOFF rw	FSPOL rw	FSDEF rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	FSALL rw							FRL rw

Toggle fields

FRL

Bits 0-7: Frame length.

FSALL

Bits 8-14: Frame synchronization active level length.

FSDEF

Bit 16: Frame synchronization definition.

FSPOL

Bit 17: Frame synchronization polarity.

Allowed values:
0: FallingEdge: FS is active low (falling edge)
1: RisingEdge: FS is active high (rising edge)

FSOFF

Bit 18: Frame synchronization offset.

Allowed values:
0: OnFirst: FS is asserted on the first bit of the slot 0
1: BeforeFirst: FS is asserted one bit before the first bit of the slot 0

SLOTR [B]

ASlot register

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

2/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
SLOTEN rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				NBSLOT rw				SLOTSZ rw			FBOFF rw

Toggle fields

FBOFF

Bits 0-4: First bit offset.

SLOTSZ

Bits 6-7: Slot size.

Allowed values:
0: DataSize: The slot size is equivalent to the data size (specified in DS[3:0] in the SAI_xCR1 register)
1: Bit16: 16-bit
2: Bit32: 32-bit

NBSLOT

Bits 8-11: Number of slots in an audio frame.

SLOTEN

Bits 16-31: Slot enable.

Allowed values:
0: Inactive: Inactive slot
1: Active: Active slot

IM [B]

AInterrupt mask register2

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

7/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									LFSDETIE rw	AFSDETIE rw	CNRDYIE rw	FREQIE rw	WCKCFGIE rw	MUTEDETIE rw	OVRUDRIE rw

Toggle fields

OVRUDRIE

Bit 0: Overrun/underrun interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is enabled

MUTEDETIE

Bit 1: Mute detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is enabled

WCKCFGIE

Bit 2: Wrong clock configuration interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is enabled

FREQIE

Bit 3: FIFO request interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is enabled

CNRDYIE

Bit 4: Codec not ready interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is enabled

AFSDETIE

Bit 5: Anticipated frame synchronization detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is enabled

LFSDETIE

Bit 6: Late frame synchronization detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is enabled

SR [B]

AStatus register

Offset: 0x38, size: 32, reset: 0x00000008, access: read-only

8/8 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
													FLVL r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									LFSDET r	AFSDET r	CNRDY r	FREQ r	WCKCFG r	MUTEDET r	OVRUDR r

Toggle fields

OVRUDR

Bit 0: Overrun / underrun.

Allowed values:
0: NoError: No overrun/underrun error
1: Overrun: Overrun/underrun error detection

MUTEDET

Bit 1: Mute detection.

Allowed values:
0: NoMute: No MUTE detection on the SD input line
1: Mute: MUTE value detected on the SD input line (0 value) for a specified number of consecutive audio frame

WCKCFG

Bit 2: Wrong clock configuration flag. This bit is read only.

Allowed values:
0: Correct: Clock configuration is correct
1: Wrong: Clock configuration does not respect the rule concerning the frame length specification

FREQ

Bit 3: FIFO request.

Allowed values:
0: NoRequest: No FIFO request
1: Request: FIFO request to read or to write the SAI_xDR

CNRDY

Bit 4: Codec not ready.

Allowed values:
0: Ready: External AC’97 Codec is ready
1: NotReady: External AC’97 Codec is not ready

AFSDET

Bit 5: Anticipated frame synchronization detection.

Allowed values:
0: NoError: No error
1: EarlySync: Frame synchronization signal is detected earlier than expected

LFSDET

Bit 6: Late frame synchronization detection.

Allowed values:
0: NoError: No error
1: NoSync: Frame synchronization signal is not present at the right time

FLVL

Bits 16-18: FIFO level threshold.

Allowed values:
0: Empty: FIFO empty
1: Quarter1: FIFO <= 1⁄4 but not empty
2: Quarter2: 1⁄4 < FIFO <= 1⁄2
3: Quarter3: 1⁄2 < FIFO <= 3⁄4
4: Quarter4: 3⁄4 < FIFO but not full
5: Full: FIFO full

CLRFR [B]

AClear flag register

Offset: 0x3c, size: 32, reset: 0x00000000, access: write-only

6/6 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									CLFSDET w	CAFSDET w	CCNRDY w		CWCKCFG w	CMUTEDET w	COVRUDR w

Toggle fields

COVRUDR

Bit 0: Clear overrun / underrun.

Allowed values:
1: Clear: Clears the OVRUDR flag

CMUTEDET

Bit 1: Mute detection flag.

Allowed values:
1: Clear: Clears the MUTEDET flag

CWCKCFG

Bit 2: Clear wrong clock configuration flag.

Allowed values:
1: Clear: Clears the WCKCFG flag

CCNRDY

Bit 4: Clear codec not ready flag.

Allowed values:
1: Clear: Clears the CNRDY flag

CAFSDET

Bit 5: Clear anticipated frame synchronization detection flag.

Allowed values:
1: Clear: Clears the AFSDET flag

CLFSDET

Bit 6: Clear late frame synchronization detection flag.

Allowed values:
1: Clear: Clears the LFSDET flag

DR [B]

AData register

Offset: 0x40, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
DATA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DATA rw

Toggle fields

DATA

Bits 0-31: Data.

SCB

0xe000ed00: System control block

5/74 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	26	25	24	23	22	19	18	17	16	15	14	13	12	11	10	9	8	7	5	4	3	2	1	0
0x0	CPUID	Implementer								Variant		Constant				PartNo											Revision
0x4	ICSR	NMIPENDSET			PENDSVSET	PENDSVCLR	PENDSTSET	PENDSTCLR			ISRPENDING		VECTPENDING			VECTPENDING				RETTOBASE			VECTACTIVE
0x8	VTOR			TBLOFF												TBLOFF
0xc	AIRCR	VECTKEYSTAT														ENDIANESS					PRIGROUP							SYSRESETREQ	VECTCLRACTIVE	VECTRESET
0x10	SCR																									SEVEONPEND		SLEEPDEEP	SLEEPONEXIT
0x14	CCR																					STKALIGN	BFHFNMIGN			DIV_0_TRP	UNALIGN__TRP		USERSETMPEND	NONBASETHRDENA
0x18	SHPR1									PRI_6						PRI_5								PRI_4
0x1c	SHPR2	PRI_11
0x20	SHPR3	PRI_15								PRI_14
0x24	SHCRS												USGFAULTENA	BUSFAULTENA	MEMFAULTENA	SVCALLPENDED	BUSFAULTPENDED	MEMFAULTPENDED	USGFAULTPENDED	SYSTICKACT	PENDSVACT		MONITORACT	SVCALLACT			USGFAULTACT		BUSFAULTACT	MEMFAULTACT
0x28	CFSR_UFSR_BFSR_MMFSR							DIVBYZERO	UNALIGNED			NOCP	INVPC	INVSTATE	UNDEFINSTR	BFARVALID		LSPERR	STKERR	UNSTKERR	IMPRECISERR	PRECISERR	IBUSERR	MMARVALID	MLSPERR	MSTKERR	MUNSTKERR		IACCVIOL
0x2c	HFSR	DEBUG_VT	FORCED																										VECTTBL
0x34	MMFAR	MMFAR														MMFAR
0x38	BFAR	BFAR														BFAR
0x3c	AFSR	IMPDEF														IMPDEF

Toggle registers

CPUID

CPUID base register

Offset: 0x0, size: 32, reset: 0x410FC241, access: read-only

5/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
Implementer r								Variant r				Constant r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PartNo r												Revision r

Toggle fields

Revision

Bits 0-3: Revision number.

PartNo

Bits 4-15: Part number of the processor.

Constant

Bits 16-19: Reads as 0xF.

Variant

Bits 20-23: Variant number.

Implementer

Bits 24-31: Implementer code.

ICSR

Interrupt control and state register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

0/9 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
NMIPENDSET rw			PENDSVSET rw	PENDSVCLR rw	PENDSTSET rw	PENDSTCLR rw			ISRPENDING rw				VECTPENDING rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
VECTPENDING rw				RETTOBASE rw			VECTACTIVE rw

Toggle fields

VECTACTIVE

Bits 0-8: Active vector.

RETTOBASE

Bit 11: Return to base level.

VECTPENDING

Bits 12-18: Pending vector.

ISRPENDING

Bit 22: Interrupt pending flag.

PENDSTCLR

Bit 25: SysTick exception clear-pending bit.

PENDSTSET

Bit 26: SysTick exception set-pending bit.

PENDSVCLR

Bit 27: PendSV clear-pending bit.

PENDSVSET

Bit 28: PendSV set-pending bit.

NMIPENDSET

Bit 31: NMI set-pending bit..

VTOR

Vector table offset register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
		TBLOFF rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
TBLOFF rw

Toggle fields

TBLOFF

Bits 9-29: Vector table base offset field.

AIRCR

Application interrupt and reset control register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

0/6 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
VECTKEYSTAT rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ENDIANESS rw					PRIGROUP rw								SYSRESETREQ rw	VECTCLRACTIVE rw	VECTRESET rw

Toggle fields

VECTRESET

Bit 0: VECTRESET.

VECTCLRACTIVE

Bit 1: VECTCLRACTIVE.

SYSRESETREQ

Bit 2: SYSRESETREQ.

PRIGROUP

Bits 8-10: PRIGROUP.

ENDIANESS

Bit 15: ENDIANESS.

VECTKEYSTAT

Bits 16-31: Register key.

SCR

System control register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
											SEVEONPEND rw		SLEEPDEEP rw	SLEEPONEXIT rw

Toggle fields

SLEEPONEXIT

Bit 1: SLEEPONEXIT.

SLEEPDEEP

Bit 2: SLEEPDEEP.

SEVEONPEND

Bit 4: Send Event on Pending bit.

CCR

Configuration and control register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

0/6 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
						STKALIGN rw	BFHFNMIGN rw				DIV_0_TRP rw	UNALIGN__TRP rw		USERSETMPEND rw	NONBASETHRDENA rw

Toggle fields

NONBASETHRDENA

Bit 0: Configures how the processor enters Thread mode.

USERSETMPEND

Bit 1: USERSETMPEND.

UNALIGN__TRP

Bit 3: UNALIGN_ TRP.

DIV_0_TRP

Bit 4: DIV_0_TRP.

BFHFNMIGN

Bit 8: BFHFNMIGN.

STKALIGN

Bit 9: STKALIGN.

SHPR1

System handler priority registers

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								PRI_6 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PRI_5 rw								PRI_4 rw

Toggle fields

PRI_4

Bits 0-7: Priority of system handler 4.

PRI_5

Bits 8-15: Priority of system handler 5.

PRI_6

Bits 16-23: Priority of system handler 6.

SHPR2

System handler priority registers

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PRI_11 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0

Toggle fields

PRI_11

Bits 24-31: Priority of system handler 11.

SHPR3

System handler priority registers

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
PRI_15 rw								PRI_14 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0

Toggle fields

PRI_14

Bits 16-23: Priority of system handler 14.

PRI_15

Bits 24-31: Priority of system handler 15.

SHCRS

System handler control and state register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

0/14 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
													USGFAULTENA rw	BUSFAULTENA rw	MEMFAULTENA rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SVCALLPENDED rw	BUSFAULTPENDED rw	MEMFAULTPENDED rw	USGFAULTPENDED rw	SYSTICKACT rw	PENDSVACT rw		MONITORACT rw	SVCALLACT rw				USGFAULTACT rw		BUSFAULTACT rw	MEMFAULTACT rw

Toggle fields

MEMFAULTACT

Bit 0: Memory management fault exception active bit.

BUSFAULTACT

Bit 1: Bus fault exception active bit.

USGFAULTACT

Bit 3: Usage fault exception active bit.

SVCALLACT

Bit 7: SVC call active bit.

MONITORACT

Bit 8: Debug monitor active bit.

PENDSVACT

Bit 10: PendSV exception active bit.

SYSTICKACT

Bit 11: SysTick exception active bit.

USGFAULTPENDED

Bit 12: Usage fault exception pending bit.

MEMFAULTPENDED

Bit 13: Memory management fault exception pending bit.

BUSFAULTPENDED

Bit 14: Bus fault exception pending bit.

SVCALLPENDED

Bit 15: SVC call pending bit.

MEMFAULTENA

Bit 16: Memory management fault enable bit.

BUSFAULTENA

Bit 17: Bus fault enable bit.

USGFAULTENA

Bit 18: Usage fault enable bit.

CFSR_UFSR_BFSR_MMFSR

Configurable fault status register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

0/18 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
						DIVBYZERO rw	UNALIGNED rw					NOCP rw	INVPC rw	INVSTATE rw	UNDEFINSTR rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BFARVALID rw		LSPERR rw	STKERR rw	UNSTKERR rw	IMPRECISERR rw	PRECISERR rw	IBUSERR rw	MMARVALID rw		MLSPERR rw	MSTKERR rw	MUNSTKERR rw		IACCVIOL rw

Toggle fields

IACCVIOL

Bit 1: Instruction access violation flag.

MUNSTKERR

Bit 3: Memory manager fault on unstacking for a return from exception.

MSTKERR

Bit 4: Memory manager fault on stacking for exception entry..

MLSPERR

Bit 5: MLSPERR.

MMARVALID

Bit 7: Memory Management Fault Address Register (MMAR) valid flag.

IBUSERR

Bit 8: Instruction bus error.

PRECISERR

Bit 9: Precise data bus error.

IMPRECISERR

Bit 10: Imprecise data bus error.

UNSTKERR

Bit 11: Bus fault on unstacking for a return from exception.

STKERR

Bit 12: Bus fault on stacking for exception entry.

LSPERR

Bit 13: Bus fault on floating-point lazy state preservation.

BFARVALID

Bit 15: Bus Fault Address Register (BFAR) valid flag.

UNDEFINSTR

Bit 16: Undefined instruction usage fault.

INVSTATE

Bit 17: Invalid state usage fault.

INVPC

Bit 18: Invalid PC load usage fault.

NOCP

Bit 19: No coprocessor usage fault..

UNALIGNED

Bit 24: Unaligned access usage fault.

DIVBYZERO

Bit 25: Divide by zero usage fault.

HFSR

Hard fault status register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
DEBUG_VT rw	FORCED rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
														VECTTBL rw

Toggle fields

VECTTBL

Bit 1: Vector table hard fault.

FORCED

Bit 30: Forced hard fault.

DEBUG_VT

Bit 31: Reserved for Debug use.

MMFAR

Memory management fault address register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
MMFAR rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MMFAR rw

Toggle fields

MMFAR

Bits 0-31: Memory management fault address.

BFAR

Bus fault address register

Offset: 0x38, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BFAR rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BFAR rw

Toggle fields

BFAR

Bits 0-31: Bus fault address.

AFSR

Auxiliary fault status register

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
IMPDEF rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IMPDEF rw

Toggle fields

IMPDEF

Bits 0-31: Implementation defined.

SCB_ACTRL

0xe000e008: System control block ACTLR

0/5 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	ACTRL																							DISOOFP	DISFPCA						DISFOLD	DISDEFWBUF	DISMCYCINT

Toggle registers

ACTRL

Auxiliary control register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/5 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
						DISOOFP rw	DISFPCA rw						DISFOLD rw	DISDEFWBUF rw	DISMCYCINT rw

Toggle fields

DISMCYCINT

Bit 0: DISMCYCINT.

DISDEFWBUF

Bit 1: DISDEFWBUF.

DISFOLD

Bit 2: DISFOLD.

DISFPCA

Bit 8: DISFPCA.

DISOOFP

Bit 9: DISOOFP.

SDMMC

0x40012800: Secure digital input/output interface

31/98 fields covered.

Toggle register map

Offset	Name	31	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	POWER																									PWRCTRL
0x4	CLKCR												HWFC_EN	NEGEDGE	WIDBUS		BYPASS	PWRSAV	CLKEN	CLKDIV
0x8	ARG	CMDARG										CMDARG
0xc	CMD												CE_ATACMD	nIEN	ENCMDcompl	SDIOSuspend	CPSMEN	WAITPEND	WAITINT	WAITRESP		CMDINDEX
0x10	RESPCMD																					RESPCMD
0x14	RESP1	CARDSTATUS1										CARDSTATUS1
0x18	RESP2	CARDSTATUS2										CARDSTATUS2
0x1c	RESP3	CARDSTATUS3										CARDSTATUS3
0x20	RESP4	CARDSTATUS4										CARDSTATUS4
0x24	DTIMER	DATATIME										DATATIME
0x28	DLEN		DATALENGTH									DATALENGTH
0x2c	DCTRL															SDIOEN	RWMOD	RWSTOP	RWSTART	DBLOCKSIZE				DMAEN	DTMODE	DTDIR	DTEN
0x30	DCOUNT		DATACOUNT									DATACOUNT
0x34	STA			CEATAEND	SDIOIT	RXDAVL	TXDAVL	RXFIFOE	TXFIFOE	RXFIFOF	TXFIFOF	RXFIFOHF	TXFIFOHE	RXACT	TXACT	CMDACT	DBCKEND	STBITERR	DATAEND	CMDSENT	CMDREND	RXOVERR	TXUNDERR	DTIMEOUT	CTIMEOUT	DCRCFAIL	CCRCFAIL
0x38	ICR			CEATAENDC	SDIOITC												DBCKENDC	STBITERRC	DATAENDC	CMDSENTC	CMDRENDC	RXOVERRC	TXUNDERRC	DTIMEOUTC	CTIMEOUTC	DCRCFAILC	CCRCFAILC
0x3c	MASK			CEATAENDIE	SDIOITIE	RXDAVLIE	TXDAVLIE	RXFIFOEIE	TXFIFOEIE	RXFIFOFIE	TXFIFOFIE	RXFIFOHFIE	TXFIFOHEIE	RXACTIE	TXACTIE	CMDACTIE	DBCKENDIE	STBITERRIE	DATAENDIE	CMDSENTIE	CMDRENDIE	RXOVERRIE	TXUNDERRIE	DTIMEOUTIE	CTIMEOUTIE	DCRCFAILIE	CCRCFAILIE
0x48	FIFOCNT			FIFOCOUNT								FIFOCOUNT
0x80	FIFO	FIFOData										FIFOData

Toggle registers

POWER

power control register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
														PWRCTRL rw

Toggle fields

PWRCTRL

Bits 0-1: PWRCTRL.

CLKCR

SDI clock control register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

0/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	HWFC_EN rw	NEGEDGE rw	WIDBUS rw		BYPASS rw	PWRSAV rw	CLKEN rw	CLKDIV rw

Toggle fields

CLKDIV

Bits 0-7: Clock divide factor.

CLKEN

Bit 8: Clock enable bit.

PWRSAV

Bit 9: Power saving configuration bit.

BYPASS

Bit 10: Clock divider bypass enable bit.

WIDBUS

Bits 11-12: Wide bus mode enable bit.

NEGEDGE

Bit 13: SDIO_CK dephasing selection bit.

HWFC_EN

Bit 14: HW Flow Control enable.

ARG

argument register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
CMDARG rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CMDARG rw

Toggle fields

CMDARG

Bits 0-31: Command argument.

CMD

command register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

0/9 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	CE_ATACMD rw	nIEN rw	ENCMDcompl rw	SDIOSuspend rw	CPSMEN rw	WAITPEND rw	WAITINT rw	WAITRESP rw		CMDINDEX rw

Toggle fields

CMDINDEX

Bits 0-5: Command index.

WAITRESP

Bits 6-7: Wait for response bits.

WAITINT

Bit 8: CPSM waits for interrupt request.

WAITPEND

Bit 9: CPSM Waits for ends of data transfer (CmdPend internal signal).

CPSMEN

Bit 10: Command path state machine (CPSM) Enable bit.

SDIOSuspend

Bit 11: SD I/O suspend command.

ENCMDcompl

Bit 12: Enable CMD completion.

nIEN

Bit 13: not Interrupt Enable.

CE_ATACMD

Bit 14: CE-ATA command.

RESPCMD

command response register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
										RESPCMD r

Toggle fields

RESPCMD

Bits 0-5: Response command index.

RESP1

response 1..4 register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
CARDSTATUS1 r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CARDSTATUS1 r

Toggle fields

CARDSTATUS1

Bits 0-31: see Table 132.

RESP2

response 1..4 register

Offset: 0x18, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
CARDSTATUS2 r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CARDSTATUS2 r

Toggle fields

CARDSTATUS2

Bits 0-31: see Table 132.

RESP3

response 1..4 register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
CARDSTATUS3 r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CARDSTATUS3 r

Toggle fields

CARDSTATUS3

Bits 0-31: see Table 132.

RESP4

response 1..4 register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
CARDSTATUS4 r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CARDSTATUS4 r

Toggle fields

CARDSTATUS4

Bits 0-31: see Table 132.

DTIMER

data timer register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
DATATIME rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DATATIME rw

Toggle fields

DATATIME

Bits 0-31: Data timeout period.

DLEN

data length register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
							DATALENGTH rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DATALENGTH rw

Toggle fields

DATALENGTH

Bits 0-24: Data length value.

DCTRL

data control register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

0/9 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				SDIOEN rw	RWMOD rw	RWSTOP rw	RWSTART rw	DBLOCKSIZE rw				DMAEN rw	DTMODE rw	DTDIR rw	DTEN rw

Toggle fields

DTEN

Bit 0: DTEN.

DTDIR

Bit 1: Data transfer direction selection.

DTMODE

Bit 2: Data transfer mode selection 1: Stream or SDIO multibyte data transfer.

DMAEN

Bit 3: DMA enable bit.

DBLOCKSIZE

Bits 4-7: Data block size.

RWSTART

Bit 8: Read wait start.

RWSTOP

Bit 9: Read wait stop.

RWMOD

Bit 10: Read wait mode.

SDIOEN

Bit 11: SD I/O enable functions.

DCOUNT

data counter register

Offset: 0x30, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
							DATACOUNT r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DATACOUNT r

Toggle fields

DATACOUNT

Bits 0-24: Data count value.

STA

status register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-only

24/24 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								CEATAEND r	SDIOIT r	RXDAVL r	TXDAVL r	RXFIFOE r	TXFIFOE r	RXFIFOF r	TXFIFOF r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RXFIFOHF r	TXFIFOHE r	RXACT r	TXACT r	CMDACT r	DBCKEND r	STBITERR r	DATAEND r	CMDSENT r	CMDREND r	RXOVERR r	TXUNDERR r	DTIMEOUT r	CTIMEOUT r	DCRCFAIL r	CCRCFAIL r

Toggle fields

CCRCFAIL

Bit 0: Command response received (CRC check failed).

DCRCFAIL

Bit 1: Data block sent/received (CRC check failed).

CTIMEOUT

Bit 2: Command response timeout.

DTIMEOUT

Bit 3: Data timeout.

TXUNDERR

Bit 4: Transmit FIFO underrun error.

RXOVERR

Bit 5: Received FIFO overrun error.

CMDREND

Bit 6: Command response received (CRC check passed).

CMDSENT

Bit 7: Command sent (no response required).

DATAEND

Bit 8: Data end (data counter, SDIDCOUNT, is zero).

STBITERR

Bit 9: Start bit not detected on all data signals in wide bus mode.

DBCKEND

Bit 10: Data block sent/received (CRC check passed).

CMDACT

Bit 11: Command transfer in progress.

TXACT

Bit 12: Data transmit in progress.

RXACT

Bit 13: Data receive in progress.

TXFIFOHE

Bit 14: Transmit FIFO half empty: at least 8 words can be written into the FIFO.

RXFIFOHF

Bit 15: Receive FIFO half full: there are at least 8 words in the FIFO.

TXFIFOF

Bit 16: Transmit FIFO full.

RXFIFOF

Bit 17: Receive FIFO full.

TXFIFOE

Bit 18: Transmit FIFO empty.

RXFIFOE

Bit 19: Receive FIFO empty.

TXDAVL

Bit 20: Data available in transmit FIFO.

RXDAVL

Bit 21: Data available in receive FIFO.

SDIOIT

Bit 22: SDIO interrupt received.

CEATAEND

Bit 23: CE-ATA command completion signal received for CMD61.

ICR

interrupt clear register

Offset: 0x38, size: 32, reset: 0x00000000, access: read-write

0/13 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								CEATAENDC rw	SDIOITC rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
					DBCKENDC rw	STBITERRC rw	DATAENDC rw	CMDSENTC rw	CMDRENDC rw	RXOVERRC rw	TXUNDERRC rw	DTIMEOUTC rw	CTIMEOUTC rw	DCRCFAILC rw	CCRCFAILC rw

Toggle fields

CCRCFAILC

Bit 0: CCRCFAIL flag clear bit.

DCRCFAILC

Bit 1: DCRCFAIL flag clear bit.

CTIMEOUTC

Bit 2: CTIMEOUT flag clear bit.

DTIMEOUTC

Bit 3: DTIMEOUT flag clear bit.

TXUNDERRC

Bit 4: TXUNDERR flag clear bit.

RXOVERRC

Bit 5: RXOVERR flag clear bit.

CMDRENDC

Bit 6: CMDREND flag clear bit.

CMDSENTC

Bit 7: CMDSENT flag clear bit.

DATAENDC

Bit 8: DATAEND flag clear bit.

STBITERRC

Bit 9: STBITERR flag clear bit.

DBCKENDC

Bit 10: DBCKEND flag clear bit.

SDIOITC

Bit 22: SDIOIT flag clear bit.

CEATAENDC

Bit 23: CEATAEND flag clear bit.

MASK

mask register

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-write

0/24 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								CEATAENDIE rw	SDIOITIE rw	RXDAVLIE rw	TXDAVLIE rw	RXFIFOEIE rw	TXFIFOEIE rw	RXFIFOFIE rw	TXFIFOFIE rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RXFIFOHFIE rw	TXFIFOHEIE rw	RXACTIE rw	TXACTIE rw	CMDACTIE rw	DBCKENDIE rw	STBITERRIE rw	DATAENDIE rw	CMDSENTIE rw	CMDRENDIE rw	RXOVERRIE rw	TXUNDERRIE rw	DTIMEOUTIE rw	CTIMEOUTIE rw	DCRCFAILIE rw	CCRCFAILIE rw

Toggle fields

CCRCFAILIE

Bit 0: Command CRC fail interrupt enable.

DCRCFAILIE

Bit 1: Data CRC fail interrupt enable.

CTIMEOUTIE

Bit 2: Command timeout interrupt enable.

DTIMEOUTIE

Bit 3: Data timeout interrupt enable.

TXUNDERRIE

Bit 4: Tx FIFO underrun error interrupt enable.

RXOVERRIE

Bit 5: Rx FIFO overrun error interrupt enable.

CMDRENDIE

Bit 6: Command response received interrupt enable.

CMDSENTIE

Bit 7: Command sent interrupt enable.

DATAENDIE

Bit 8: Data end interrupt enable.

STBITERRIE

Bit 9: Start bit error interrupt enable.

DBCKENDIE

Bit 10: Data block end interrupt enable.

CMDACTIE

Bit 11: Command acting interrupt enable.

TXACTIE

Bit 12: Data transmit acting interrupt enable.

RXACTIE

Bit 13: Data receive acting interrupt enable.

TXFIFOHEIE

Bit 14: Tx FIFO half empty interrupt enable.

RXFIFOHFIE

Bit 15: Rx FIFO half full interrupt enable.

TXFIFOFIE

Bit 16: Tx FIFO full interrupt enable.

RXFIFOFIE

Bit 17: Rx FIFO full interrupt enable.

TXFIFOEIE

Bit 18: Tx FIFO empty interrupt enable.

RXFIFOEIE

Bit 19: Rx FIFO empty interrupt enable.

TXDAVLIE

Bit 20: Data available in Tx FIFO interrupt enable.

RXDAVLIE

Bit 21: Data available in Rx FIFO interrupt enable.

SDIOITIE

Bit 22: SDIO mode interrupt received interrupt enable.

CEATAENDIE

Bit 23: CE-ATA command completion signal received interrupt enable.

FIFOCNT

FIFO counter register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								FIFOCOUNT r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FIFOCOUNT r

Toggle fields

FIFOCOUNT

Bits 0-23: Remaining number of words to be written to or read from the FIFO.

FIFO

data FIFO register

Offset: 0x80, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FIFOData rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
FIFOData rw

Toggle fields

FIFOData

Bits 0-31: Receive and transmit FIFO data.

SPI1

0x40013000: Serial peripheral interface/Inter-IC sound

33/40 fields covered.

Toggle register map

Offset	Name	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0 (16-bit)	CR1	BIDIMODE	BIDIOE	CRCEN	CRCNEXT	CRCL	RXONLY	SSM	SSI	LSBFIRST	SPE	BR			MSTR	CPOL	CPHA
0x4 (16-bit)	CR2		LDMA_TX	LDMA_RX	FRXTH	DS				TXEIE	RXNEIE	ERRIE	FRF	NSSP	SSOE	TXDMAEN	RXDMAEN
0x8 (16-bit)	SR				FTLVL		FRLVL		FRE	BSY	OVR	MODF	CRCERR			TXE	RXNE
0xc (16-bit)	DR	DR
0xc (8-bit)	DR8									DR
0x10 (16-bit)	CRCPR	CRCPOLY
0x14 (16-bit)	RXCRCR	RxCRC
0x18 (16-bit)	TXCRCR	TxCRC

Toggle registers

CR1

control register 1

Offset: 0x0, size: 16, reset: 0x00000000, access: read-write

13/14 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BIDIMODE rw	BIDIOE rw	CRCEN rw	CRCNEXT rw	CRCL rw	RXONLY rw	SSM rw	SSI rw	LSBFIRST rw	SPE rw	BR rw			MSTR rw	CPOL rw	CPHA rw

Toggle fields

CPHA

Bit 0: Clock phase.

Allowed values:
0: FirstEdge: The first clock transition is the first data capture edge
1: SecondEdge: The second clock transition is the first data capture edge

CPOL

Bit 1: Clock polarity.

Allowed values:
0: IdleLow: CK to 0 when idle
1: IdleHigh: CK to 1 when idle

MSTR

Bit 2: Master selection.

Allowed values:
0: Slave: Slave configuration
1: Master: Master configuration

BR

Bits 3-5: Baud rate control.

Allowed values:
0: Div2: f_PCLK / 2
1: Div4: f_PCLK / 4
2: Div8: f_PCLK / 8
3: Div16: f_PCLK / 16
4: Div32: f_PCLK / 32
5: Div64: f_PCLK / 64
6: Div128: f_PCLK / 128
7: Div256: f_PCLK / 256

SPE

Bit 6: SPI enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

LSBFIRST

Bit 7: Frame format.

Allowed values:
0: MSBFirst: Data is transmitted/received with the MSB first
1: LSBFirst: Data is transmitted/received with the LSB first

SSI

Bit 8: Internal slave select.

Allowed values:
0: SlaveSelected: 0 is forced onto the NSS pin and the I/O value of the NSS pin is ignored
1: SlaveNotSelected: 1 is forced onto the NSS pin and the I/O value of the NSS pin is ignored

SSM

Bit 9: Software slave management.

Allowed values:
0: Disabled: Software slave management disabled
1: Enabled: Software slave management enabled

RXONLY

Bit 10: Receive only.

Allowed values:
0: FullDuplex: Full duplex (Transmit and receive)
1: OutputDisabled: Output disabled (Receive-only mode)

CRCL

Bit 11: CRC length.

CRCNEXT

Bit 12: CRC transfer next.

Allowed values:
0: TxBuffer: Next transmit value is from Tx buffer
1: CRC: Next transmit value is from Tx CRC register

CRCEN

Bit 13: Hardware CRC calculation enable.

Allowed values:
0: Disabled: CRC calculation disabled
1: Enabled: CRC calculation enabled

BIDIOE

Bit 14: Output enable in bidirectional mode.

Allowed values:
0: OutputDisabled: Output disabled (receive-only mode)
1: OutputEnabled: Output enabled (transmit-only mode)

BIDIMODE

Bit 15: Bidirectional data mode enable.

Allowed values:
0: Unidirectional: 2-line unidirectional data mode selected
1: Bidirectional: 1-line bidirectional data mode selected

CR2

control register 2

Offset: 0x4, size: 16, reset: 0x00000000, access: read-write

6/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	LDMA_TX rw	LDMA_RX rw	FRXTH rw	DS rw				TXEIE rw	RXNEIE rw	ERRIE rw	FRF rw	NSSP rw	SSOE rw	TXDMAEN rw	RXDMAEN rw

Toggle fields

RXDMAEN

Bit 0: Rx buffer DMA enable.

Allowed values:
0: Disabled: Rx buffer DMA disabled
1: Enabled: Rx buffer DMA enabled

TXDMAEN

Bit 1: Tx buffer DMA enable.

Allowed values:
0: Disabled: Tx buffer DMA disabled
1: Enabled: Tx buffer DMA enabled

SSOE

Bit 2: SS output enable.

Allowed values:
0: Disabled: SS output is disabled in master mode
1: Enabled: SS output is enabled in master mode

NSSP

Bit 3: NSS pulse management.

FRF

Bit 4: Frame format.

ERRIE

Bit 5: Error interrupt enable.

Allowed values:
0: Masked: Error interrupt masked
1: NotMasked: Error interrupt not masked

RXNEIE

Bit 6: RX buffer not empty interrupt enable.

Allowed values:
0: Masked: RXE interrupt masked
1: NotMasked: RXE interrupt not masked

TXEIE

Bit 7: Tx buffer empty interrupt enable.

Allowed values:
0: Masked: TXE interrupt masked
1: NotMasked: TXE interrupt not masked

DS

Bits 8-11: Data size.

FRXTH

Bit 12: FIFO reception threshold.

LDMA_RX

Bit 13: Last DMA transfer for reception.

LDMA_TX

Bit 14: Last DMA transfer for transmission.

SR

status register

Offset: 0x8, size: 16, reset: 0x00000002, access: Unspecified

9/9 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			FTLVL r		FRLVL r		FRE r	BSY r	OVR r	MODF r	CRCERR rw			TXE r	RXNE r

Toggle fields

RXNE

Bit 0: Receive buffer not empty.

Allowed values:
0: Empty: Rx buffer empty
1: NotEmpty: Rx buffer not empty

TXE

Bit 1: Transmit buffer empty.

Allowed values:
0: NotEmpty: Tx buffer not empty
1: Empty: Tx buffer empty

CRCERR

Bit 4: CRC error flag.

Allowed values:
0: Match: CRC value received matches the SPIx_RXCRCR value
1: NoMatch: CRC value received does not match the SPIx_RXCRCR value

MODF

Bit 5: Mode fault.

Allowed values:
0: NoFault: No mode fault occurred
1: Fault: Mode fault occurred

OVR

Bit 6: Overrun flag.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

BSY

Bit 7: Busy flag.

Allowed values:
0: NotBusy: SPI not busy
1: Busy: SPI busy

FRE

Bit 8: Frame format error.

FRLVL

Bits 9-10: FIFO reception level.

FTLVL

Bits 11-12: FIFO transmission level.

DR

data register

Offset: 0xc, size: 16, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DR rw

Toggle fields

DR

Bits 0-15: Data register.

Allowed values: 0x0-0xffff

DR8

Direct 8-bit access to data register

Offset: 0xc, size: 8, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								DR rw

Toggle fields

DR

Bits 0-7: Data register.

Allowed values: 0x0-0xff

CRCPR

CRC polynomial register

Offset: 0x10, size: 16, reset: 0x00000007, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CRCPOLY rw

Toggle fields

CRCPOLY

Bits 0-15: CRC polynomial register.

Allowed values: 0x0-0xffff

RXCRCR

RX CRC register

Offset: 0x14, size: 16, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RxCRC r

Toggle fields

RxCRC

Bits 0-15: Rx CRC register.

Allowed values: 0x0-0xffff

TXCRCR

TX CRC register

Offset: 0x18, size: 16, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
TxCRC r

Toggle fields

TxCRC

Bits 0-15: Tx CRC register.

Allowed values: 0x0-0xffff

SPI2

0x40003800: Serial peripheral interface/Inter-IC sound

33/40 fields covered.

Toggle register map

Offset	Name	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0 (16-bit)	CR1	BIDIMODE	BIDIOE	CRCEN	CRCNEXT	CRCL	RXONLY	SSM	SSI	LSBFIRST	SPE	BR			MSTR	CPOL	CPHA
0x4 (16-bit)	CR2		LDMA_TX	LDMA_RX	FRXTH	DS				TXEIE	RXNEIE	ERRIE	FRF	NSSP	SSOE	TXDMAEN	RXDMAEN
0x8 (16-bit)	SR				FTLVL		FRLVL		FRE	BSY	OVR	MODF	CRCERR			TXE	RXNE
0xc (16-bit)	DR	DR
0xc (8-bit)	DR8									DR
0x10 (16-bit)	CRCPR	CRCPOLY
0x14 (16-bit)	RXCRCR	RxCRC
0x18 (16-bit)	TXCRCR	TxCRC

Toggle registers

CR1

control register 1

Offset: 0x0, size: 16, reset: 0x00000000, access: read-write

13/14 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BIDIMODE rw	BIDIOE rw	CRCEN rw	CRCNEXT rw	CRCL rw	RXONLY rw	SSM rw	SSI rw	LSBFIRST rw	SPE rw	BR rw			MSTR rw	CPOL rw	CPHA rw

Toggle fields

CPHA

Bit 0: Clock phase.

Allowed values:
0: FirstEdge: The first clock transition is the first data capture edge
1: SecondEdge: The second clock transition is the first data capture edge

CPOL

Bit 1: Clock polarity.

Allowed values:
0: IdleLow: CK to 0 when idle
1: IdleHigh: CK to 1 when idle

MSTR

Bit 2: Master selection.

Allowed values:
0: Slave: Slave configuration
1: Master: Master configuration

BR

Bits 3-5: Baud rate control.

Allowed values:
0: Div2: f_PCLK / 2
1: Div4: f_PCLK / 4
2: Div8: f_PCLK / 8
3: Div16: f_PCLK / 16
4: Div32: f_PCLK / 32
5: Div64: f_PCLK / 64
6: Div128: f_PCLK / 128
7: Div256: f_PCLK / 256

SPE

Bit 6: SPI enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

LSBFIRST

Bit 7: Frame format.

Allowed values:
0: MSBFirst: Data is transmitted/received with the MSB first
1: LSBFirst: Data is transmitted/received with the LSB first

SSI

Bit 8: Internal slave select.

Allowed values:
0: SlaveSelected: 0 is forced onto the NSS pin and the I/O value of the NSS pin is ignored
1: SlaveNotSelected: 1 is forced onto the NSS pin and the I/O value of the NSS pin is ignored

SSM

Bit 9: Software slave management.

Allowed values:
0: Disabled: Software slave management disabled
1: Enabled: Software slave management enabled

RXONLY

Bit 10: Receive only.

Allowed values:
0: FullDuplex: Full duplex (Transmit and receive)
1: OutputDisabled: Output disabled (Receive-only mode)

CRCL

Bit 11: CRC length.

CRCNEXT

Bit 12: CRC transfer next.

Allowed values:
0: TxBuffer: Next transmit value is from Tx buffer
1: CRC: Next transmit value is from Tx CRC register

CRCEN

Bit 13: Hardware CRC calculation enable.

Allowed values:
0: Disabled: CRC calculation disabled
1: Enabled: CRC calculation enabled

BIDIOE

Bit 14: Output enable in bidirectional mode.

Allowed values:
0: OutputDisabled: Output disabled (receive-only mode)
1: OutputEnabled: Output enabled (transmit-only mode)

BIDIMODE

Bit 15: Bidirectional data mode enable.

Allowed values:
0: Unidirectional: 2-line unidirectional data mode selected
1: Bidirectional: 1-line bidirectional data mode selected

CR2

control register 2

Offset: 0x4, size: 16, reset: 0x00000000, access: read-write

6/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	LDMA_TX rw	LDMA_RX rw	FRXTH rw	DS rw				TXEIE rw	RXNEIE rw	ERRIE rw	FRF rw	NSSP rw	SSOE rw	TXDMAEN rw	RXDMAEN rw

Toggle fields

RXDMAEN

Bit 0: Rx buffer DMA enable.

Allowed values:
0: Disabled: Rx buffer DMA disabled
1: Enabled: Rx buffer DMA enabled

TXDMAEN

Bit 1: Tx buffer DMA enable.

Allowed values:
0: Disabled: Tx buffer DMA disabled
1: Enabled: Tx buffer DMA enabled

SSOE

Bit 2: SS output enable.

Allowed values:
0: Disabled: SS output is disabled in master mode
1: Enabled: SS output is enabled in master mode

NSSP

Bit 3: NSS pulse management.

FRF

Bit 4: Frame format.

ERRIE

Bit 5: Error interrupt enable.

Allowed values:
0: Masked: Error interrupt masked
1: NotMasked: Error interrupt not masked

RXNEIE

Bit 6: RX buffer not empty interrupt enable.

Allowed values:
0: Masked: RXE interrupt masked
1: NotMasked: RXE interrupt not masked

TXEIE

Bit 7: Tx buffer empty interrupt enable.

Allowed values:
0: Masked: TXE interrupt masked
1: NotMasked: TXE interrupt not masked

DS

Bits 8-11: Data size.

FRXTH

Bit 12: FIFO reception threshold.

LDMA_RX

Bit 13: Last DMA transfer for reception.

LDMA_TX

Bit 14: Last DMA transfer for transmission.

SR

status register

Offset: 0x8, size: 16, reset: 0x00000002, access: Unspecified

9/9 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			FTLVL r		FRLVL r		FRE r	BSY r	OVR r	MODF r	CRCERR rw			TXE r	RXNE r

Toggle fields

RXNE

Bit 0: Receive buffer not empty.

Allowed values:
0: Empty: Rx buffer empty
1: NotEmpty: Rx buffer not empty

TXE

Bit 1: Transmit buffer empty.

Allowed values:
0: NotEmpty: Tx buffer not empty
1: Empty: Tx buffer empty

CRCERR

Bit 4: CRC error flag.

Allowed values:
0: Match: CRC value received matches the SPIx_RXCRCR value
1: NoMatch: CRC value received does not match the SPIx_RXCRCR value

MODF

Bit 5: Mode fault.

Allowed values:
0: NoFault: No mode fault occurred
1: Fault: Mode fault occurred

OVR

Bit 6: Overrun flag.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

BSY

Bit 7: Busy flag.

Allowed values:
0: NotBusy: SPI not busy
1: Busy: SPI busy

FRE

Bit 8: Frame format error.

FRLVL

Bits 9-10: FIFO reception level.

FTLVL

Bits 11-12: FIFO transmission level.

DR

data register

Offset: 0xc, size: 16, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DR rw

Toggle fields

DR

Bits 0-15: Data register.

Allowed values: 0x0-0xffff

DR8

Direct 8-bit access to data register

Offset: 0xc, size: 8, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								DR rw

Toggle fields

DR

Bits 0-7: Data register.

Allowed values: 0x0-0xff

CRCPR

CRC polynomial register

Offset: 0x10, size: 16, reset: 0x00000007, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CRCPOLY rw

Toggle fields

CRCPOLY

Bits 0-15: CRC polynomial register.

Allowed values: 0x0-0xffff

RXCRCR

RX CRC register

Offset: 0x14, size: 16, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RxCRC r

Toggle fields

RxCRC

Bits 0-15: Rx CRC register.

Allowed values: 0x0-0xffff

TXCRCR

TX CRC register

Offset: 0x18, size: 16, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
TxCRC r

Toggle fields

TxCRC

Bits 0-15: Tx CRC register.

Allowed values: 0x0-0xffff

SPI3

0x40003c00: Serial peripheral interface/Inter-IC sound

33/40 fields covered.

Toggle register map

Offset	Name	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0 (16-bit)	CR1	BIDIMODE	BIDIOE	CRCEN	CRCNEXT	CRCL	RXONLY	SSM	SSI	LSBFIRST	SPE	BR			MSTR	CPOL	CPHA
0x4 (16-bit)	CR2		LDMA_TX	LDMA_RX	FRXTH	DS				TXEIE	RXNEIE	ERRIE	FRF	NSSP	SSOE	TXDMAEN	RXDMAEN
0x8 (16-bit)	SR				FTLVL		FRLVL		FRE	BSY	OVR	MODF	CRCERR			TXE	RXNE
0xc (16-bit)	DR	DR
0xc (8-bit)	DR8									DR
0x10 (16-bit)	CRCPR	CRCPOLY
0x14 (16-bit)	RXCRCR	RxCRC
0x18 (16-bit)	TXCRCR	TxCRC

Toggle registers

CR1

control register 1

Offset: 0x0, size: 16, reset: 0x00000000, access: read-write

13/14 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BIDIMODE rw	BIDIOE rw	CRCEN rw	CRCNEXT rw	CRCL rw	RXONLY rw	SSM rw	SSI rw	LSBFIRST rw	SPE rw	BR rw			MSTR rw	CPOL rw	CPHA rw

Toggle fields

CPHA

Bit 0: Clock phase.

Allowed values:
0: FirstEdge: The first clock transition is the first data capture edge
1: SecondEdge: The second clock transition is the first data capture edge

CPOL

Bit 1: Clock polarity.

Allowed values:
0: IdleLow: CK to 0 when idle
1: IdleHigh: CK to 1 when idle

MSTR

Bit 2: Master selection.

Allowed values:
0: Slave: Slave configuration
1: Master: Master configuration

BR

Bits 3-5: Baud rate control.

Allowed values:
0: Div2: f_PCLK / 2
1: Div4: f_PCLK / 4
2: Div8: f_PCLK / 8
3: Div16: f_PCLK / 16
4: Div32: f_PCLK / 32
5: Div64: f_PCLK / 64
6: Div128: f_PCLK / 128
7: Div256: f_PCLK / 256

SPE

Bit 6: SPI enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

LSBFIRST

Bit 7: Frame format.

Allowed values:
0: MSBFirst: Data is transmitted/received with the MSB first
1: LSBFirst: Data is transmitted/received with the LSB first

SSI

Bit 8: Internal slave select.

Allowed values:
0: SlaveSelected: 0 is forced onto the NSS pin and the I/O value of the NSS pin is ignored
1: SlaveNotSelected: 1 is forced onto the NSS pin and the I/O value of the NSS pin is ignored

SSM

Bit 9: Software slave management.

Allowed values:
0: Disabled: Software slave management disabled
1: Enabled: Software slave management enabled

RXONLY

Bit 10: Receive only.

Allowed values:
0: FullDuplex: Full duplex (Transmit and receive)
1: OutputDisabled: Output disabled (Receive-only mode)

CRCL

Bit 11: CRC length.

CRCNEXT

Bit 12: CRC transfer next.

Allowed values:
0: TxBuffer: Next transmit value is from Tx buffer
1: CRC: Next transmit value is from Tx CRC register

CRCEN

Bit 13: Hardware CRC calculation enable.

Allowed values:
0: Disabled: CRC calculation disabled
1: Enabled: CRC calculation enabled

BIDIOE

Bit 14: Output enable in bidirectional mode.

Allowed values:
0: OutputDisabled: Output disabled (receive-only mode)
1: OutputEnabled: Output enabled (transmit-only mode)

BIDIMODE

Bit 15: Bidirectional data mode enable.

Allowed values:
0: Unidirectional: 2-line unidirectional data mode selected
1: Bidirectional: 1-line bidirectional data mode selected

CR2

control register 2

Offset: 0x4, size: 16, reset: 0x00000000, access: read-write

6/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	LDMA_TX rw	LDMA_RX rw	FRXTH rw	DS rw				TXEIE rw	RXNEIE rw	ERRIE rw	FRF rw	NSSP rw	SSOE rw	TXDMAEN rw	RXDMAEN rw

Toggle fields

RXDMAEN

Bit 0: Rx buffer DMA enable.

Allowed values:
0: Disabled: Rx buffer DMA disabled
1: Enabled: Rx buffer DMA enabled

TXDMAEN

Bit 1: Tx buffer DMA enable.

Allowed values:
0: Disabled: Tx buffer DMA disabled
1: Enabled: Tx buffer DMA enabled

SSOE

Bit 2: SS output enable.

Allowed values:
0: Disabled: SS output is disabled in master mode
1: Enabled: SS output is enabled in master mode

NSSP

Bit 3: NSS pulse management.

FRF

Bit 4: Frame format.

ERRIE

Bit 5: Error interrupt enable.

Allowed values:
0: Masked: Error interrupt masked
1: NotMasked: Error interrupt not masked

RXNEIE

Bit 6: RX buffer not empty interrupt enable.

Allowed values:
0: Masked: RXE interrupt masked
1: NotMasked: RXE interrupt not masked

TXEIE

Bit 7: Tx buffer empty interrupt enable.

Allowed values:
0: Masked: TXE interrupt masked
1: NotMasked: TXE interrupt not masked

DS

Bits 8-11: Data size.

FRXTH

Bit 12: FIFO reception threshold.

LDMA_RX

Bit 13: Last DMA transfer for reception.

LDMA_TX

Bit 14: Last DMA transfer for transmission.

SR

status register

Offset: 0x8, size: 16, reset: 0x00000002, access: Unspecified

9/9 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			FTLVL r		FRLVL r		FRE r	BSY r	OVR r	MODF r	CRCERR rw			TXE r	RXNE r

Toggle fields

RXNE

Bit 0: Receive buffer not empty.

Allowed values:
0: Empty: Rx buffer empty
1: NotEmpty: Rx buffer not empty

TXE

Bit 1: Transmit buffer empty.

Allowed values:
0: NotEmpty: Tx buffer not empty
1: Empty: Tx buffer empty

CRCERR

Bit 4: CRC error flag.

Allowed values:
0: Match: CRC value received matches the SPIx_RXCRCR value
1: NoMatch: CRC value received does not match the SPIx_RXCRCR value

MODF

Bit 5: Mode fault.

Allowed values:
0: NoFault: No mode fault occurred
1: Fault: Mode fault occurred

OVR

Bit 6: Overrun flag.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

BSY

Bit 7: Busy flag.

Allowed values:
0: NotBusy: SPI not busy
1: Busy: SPI busy

FRE

Bit 8: Frame format error.

FRLVL

Bits 9-10: FIFO reception level.

FTLVL

Bits 11-12: FIFO transmission level.

DR

data register

Offset: 0xc, size: 16, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DR rw

Toggle fields

DR

Bits 0-15: Data register.

Allowed values: 0x0-0xffff

DR8

Direct 8-bit access to data register

Offset: 0xc, size: 8, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								DR rw

Toggle fields

DR

Bits 0-7: Data register.

Allowed values: 0x0-0xff

CRCPR

CRC polynomial register

Offset: 0x10, size: 16, reset: 0x00000007, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CRCPOLY rw

Toggle fields

CRCPOLY

Bits 0-15: CRC polynomial register.

Allowed values: 0x0-0xffff

RXCRCR

RX CRC register

Offset: 0x14, size: 16, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RxCRC r

Toggle fields

RxCRC

Bits 0-15: Rx CRC register.

Allowed values: 0x0-0xffff

TXCRCR

TX CRC register

Offset: 0x18, size: 16, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
TxCRC r

Toggle fields

TxCRC

Bits 0-15: Tx CRC register.

Allowed values: 0x0-0xffff

STK

0xe000e010: SysTick timer

0/9 fields covered.

Toggle register map

Offset	Name	31	30	23	16	15	2	1	0
0x0	CTRL				COUNTFLAG		CLKSOURCE	TICKINT	ENABLE
0x4	LOAD			RELOAD		RELOAD
0x8	VAL			CURRENT		CURRENT
0xc	CALIB	NOREF	SKEW	TENMS		TENMS

Toggle registers

CTRL

SysTick control and status register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
															COUNTFLAG rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
													CLKSOURCE rw	TICKINT rw	ENABLE rw

Toggle fields

ENABLE

Bit 0: Counter enable.

TICKINT

Bit 1: SysTick exception request enable.

CLKSOURCE

Bit 2: Clock source selection.

COUNTFLAG

Bit 16: COUNTFLAG.

LOAD

SysTick reload value register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								RELOAD rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RELOAD rw

Toggle fields

RELOAD

Bits 0-23: RELOAD value.

VAL

SysTick current value register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								CURRENT rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CURRENT rw

Toggle fields

CURRENT

Bits 0-23: Current counter value.

CALIB

SysTick calibration value register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
NOREF rw	SKEW rw							TENMS rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
TENMS rw

Toggle fields

TENMS

Bits 0-23: Calibration value.

SKEW

Bit 30: SKEW flag: Indicates whether the TENMS value is exact.

NOREF

Bit 31: NOREF flag. Reads as zero.

SWPMI1

0x40008800: Single Wire Protocol Master Interface

13/38 fields covered.

Toggle register map

Offset	Name	31	15	10	9	8	7	6	5	4	3	2	1	0
0x0	CR			DEACT					SWPME	LPBK	TXMODE	RXMODE	TXDMA	RXDMA
0x4	BRR								BR
0xc	ISR			DEACTF	SUSP	SRF	TCF	TXE	RXNE	TXUNRF	RXOVRF	RXBERF	TXBEF	RXBFF
0x10	ICR					CSRF	CTCF			CTXUNRF	CRXOVRF	CRXBERF	CTXBEF	CRXBFF
0x14	IER					SRIE	TCIE	TIE	RIE	TXUNRIE	RXOVRIE	RXBERIE	TXBEIE	RXBFIE
0x18	RFL									RFL
0x1c	TDR	TD	TD
0x20	RDR	RD	RD

Toggle registers

CR

SWPMI Configuration/Control register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
					DEACT rw					SWPME rw	LPBK rw	TXMODE rw	RXMODE rw	TXDMA rw	RXDMA rw

Toggle fields

RXDMA

Bit 0: Reception DMA enable.

TXDMA

Bit 1: Transmission DMA enable.

RXMODE

Bit 2: Reception buffering mode.

TXMODE

Bit 3: Transmission buffering mode.

LPBK

Bit 4: Loopback mode enable.

SWPME

Bit 5: Single wire protocol master interface enable.

DEACT

Bit 10: Single wire protocol master interface deactivate.

BRR

SWPMI Bitrate register

Offset: 0x4, size: 32, reset: 0x00000001, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
										BR rw

Toggle fields

BR

Bits 0-5: Bitrate prescaler.

ISR

SWPMI Interrupt and Status register

Offset: 0xc, size: 32, reset: 0x000002C2, access: read-only

11/11 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
					DEACTF r	SUSP r	SRF r	TCF r	TXE r	RXNE r	TXUNRF r	RXOVRF r	RXBERF r	TXBEF r	RXBFF r

Toggle fields

RXBFF

Bit 0: Receive buffer full flag.

TXBEF

Bit 1: Transmit buffer empty flag.

RXBERF

Bit 2: Receive CRC error flag.

RXOVRF

Bit 3: Receive overrun error flag.

TXUNRF

Bit 4: Transmit underrun error flag.

RXNE

Bit 5: Receive data register not empty.

TXE

Bit 6: Transmit data register empty.

TCF

Bit 7: Transfer complete flag.

SRF

Bit 8: Slave resume flag.

SUSP

Bit 9: SUSPEND flag.

DEACTF

Bit 10: DEACTIVATED flag.

ICR

SWPMI Interrupt Flag Clear register

Offset: 0x10, size: 32, reset: 0x00000000, access: write-only

0/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							CSRF w	CTCF w			CTXUNRF w	CRXOVRF w	CRXBERF w	CTXBEF w	CRXBFF w

Toggle fields

CRXBFF

Bit 0: Clear receive buffer full flag.

CTXBEF

Bit 1: Clear transmit buffer empty flag.

CRXBERF

Bit 2: Clear receive CRC error flag.

CRXOVRF

Bit 3: Clear receive overrun error flag.

CTXUNRF

Bit 4: Clear transmit underrun error flag.

CTCF

Bit 7: Clear transfer complete flag.

CSRF

Bit 8: Clear slave resume flag.

IER

SWPMI Interrupt Enable register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

0/9 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							SRIE rw	TCIE rw	TIE rw	RIE rw	TXUNRIE rw	RXOVRIE rw	RXBERIE rw	TXBEIE rw	RXBFIE rw

Toggle fields

RXBFIE

Bit 0: Receive buffer full interrupt enable.

TXBEIE

Bit 1: Transmit buffer empty interrupt enable.

RXBERIE

Bit 2: Receive CRC error interrupt enable.

RXOVRIE

Bit 3: Receive overrun error interrupt enable.

TXUNRIE

Bit 4: Transmit underrun error interrupt enable.

RIE

Bit 5: Receive interrupt enable.

TIE

Bit 6: Transmit interrupt enable.

TCIE

Bit 7: Transmit complete interrupt enable.

SRIE

Bit 8: Slave resume interrupt enable.

RFL

SWPMI Receive Frame Length register

Offset: 0x18, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
											RFL r

Toggle fields

RFL

Bits 0-4: Receive frame length.

TDR

SWPMI Transmit data register

Offset: 0x1c, size: 32, reset: 0x00000000, access: write-only

0/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
TD w
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
TD w

Toggle fields

TD

Bits 0-31: Transmit data.

RDR

SWPMI Receive data register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
RD r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RD r

Toggle fields

RD

Bits 0-31: received data.

SYSCFG

0x40010000: System configuration controller

1/69 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	MEMRMP																								FB_MODE					QFS	MEM_MODE
0x4	CFGR1	FPU_IE									I2C3_FMP	I2C2_FMP	I2C1_FMP	I2C_PB9_FMP	I2C_PB8_FMP	I2C_PB7_FMP	I2C_PB6_FMP								BOOSTEN								FWDIS
0x8	EXTICR1																		EXTI3				EXTI2				EXTI1				EXTI0
0xc	EXTICR2																		EXTI7				EXTI6				EXTI5				EXTI4
0x10	EXTICR3																		EXTI11				EXTI10				EXTI9				EXTI8
0x14	EXTICR4																		EXTI15				EXTI14				EXTI13				EXTI12
0x18	SCSR																															SRAM2BSY	SRAM2ER
0x1c	CFGR2																								SPF					ECCL	PVDL	SPL	CLL
0x20	SWPR	P31WP	P30WP	P29WP	P28WP	P27WP	P26WP	P25WP	P24WP	P23WP	P22WP	P21WP	P20WP	P19WP	P18WP	P17WP	P16WP	P15WP	P14WP	P13WP	P12WP	P11WP	P10WP	P9WP	P8WP	P7WP	P6WP	P5WP	P4WP	P3WP	P2WP	P1WP	P0WP
0x24	SKR																									KEY

Toggle registers

MEMRMP

memory remap register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							FB_MODE rw					QFS rw	MEM_MODE rw

Toggle fields

MEM_MODE

Bits 0-2: Memory mapping selection.

QFS

Bit 3: QUADSPI memory mapping swap.

FB_MODE

Bit 8: Flash Bank mode selection.

CFGR1

configuration register 1

Offset: 0x4, size: 32, reset: 0x7C000001, access: read-write

0/10 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
FPU_IE rw									I2C3_FMP rw	I2C2_FMP rw	I2C1_FMP rw	I2C_PB9_FMP rw	I2C_PB8_FMP rw	I2C_PB7_FMP rw	I2C_PB6_FMP rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							BOOSTEN rw								FWDIS rw

Toggle fields

FWDIS

Bit 0: Firewall disable.

BOOSTEN

Bit 8: I/O analog switch voltage booster enable.

I2C_PB6_FMP

Bit 16: Fast-mode Plus (Fm+) driving capability activation on PB6.

I2C_PB7_FMP

Bit 17: Fast-mode Plus (Fm+) driving capability activation on PB7.

I2C_PB8_FMP

Bit 18: Fast-mode Plus (Fm+) driving capability activation on PB8.

I2C_PB9_FMP

Bit 19: Fast-mode Plus (Fm+) driving capability activation on PB9.

I2C1_FMP

Bit 20: I2C1 Fast-mode Plus driving capability activation.

I2C2_FMP

Bit 21: I2C2 Fast-mode Plus driving capability activation.

I2C3_FMP

Bit 22: I2C3 Fast-mode Plus driving capability activation.

FPU_IE

Bits 26-31: Floating Point Unit interrupts enable bits.

EXTICR1

external interrupt configuration register 1

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	EXTI3 rw				EXTI2 rw				EXTI1 rw				EXTI0 rw

Toggle fields

EXTI0

Bits 0-2: EXTI 0 configuration bits.

EXTI1

Bits 4-6: EXTI 1 configuration bits.

EXTI2

Bits 8-10: EXTI 2 configuration bits.

EXTI3

Bits 12-14: EXTI 3 configuration bits.

EXTICR2

external interrupt configuration register 2

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	EXTI7 rw				EXTI6 rw				EXTI5 rw				EXTI4 rw

Toggle fields

EXTI4

Bits 0-2: EXTI 4 configuration bits.

EXTI5

Bits 4-6: EXTI 5 configuration bits.

EXTI6

Bits 8-10: EXTI 6 configuration bits.

EXTI7

Bits 12-14: EXTI 7 configuration bits.

EXTICR3

external interrupt configuration register 3

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	EXTI11 rw				EXTI10 rw				EXTI9 rw				EXTI8 rw

Toggle fields

EXTI8

Bits 0-2: EXTI 8 configuration bits.

EXTI9

Bits 4-6: EXTI 9 configuration bits.

EXTI10

Bits 8-10: EXTI 10 configuration bits.

EXTI11

Bits 12-14: EXTI 11 configuration bits.

EXTICR4

external interrupt configuration register 4

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	EXTI15 rw				EXTI14 rw				EXTI13 rw				EXTI12 rw

Toggle fields

EXTI12

Bits 0-2: EXTI12 configuration bits.

EXTI13

Bits 4-6: EXTI13 configuration bits.

EXTI14

Bits 8-10: EXTI14 configuration bits.

EXTI15

Bits 12-14: EXTI15 configuration bits.

SCSR

Offset: 0x18, size: 32, reset: 0x00000000, access: Unspecified

1/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
														SRAM2BSY r	SRAM2ER rw

Toggle fields

SRAM2ER

Bit 0: SRAM2 Erase.

SRAM2BSY

Bit 1: SRAM2 busy by erase operation.

CFGR2

Offset: 0x1c, size: 32, reset: 0x00000000, access: Unspecified

0/5 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							SPF rw					ECCL w	PVDL w	SPL w	CLL w

Toggle fields

CLL

Bit 0: CortexÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¾Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¾ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¾ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¾Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â¦ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â¦ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¾ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¾Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¾ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â¦ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¦ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¾Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â¦ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â¦ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¾Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¾ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¾ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¾Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â¦ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â¦ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¾Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¾ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â¦ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¾Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â¦ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¦ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¾Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â¦ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â¦ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¾Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¾ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â¦ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¦ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¾Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â¦ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â¦ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¾ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¾Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¾ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¾ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¾Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â¦ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¦ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¾Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¾ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â¦ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¦ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¾Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€šÃ‚Â¦ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â¦ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ’Ã¢â‚¬Â¦Ãƒâ€šÃ‚Â¡ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬Ãƒâ€¦Ã‚Â¡ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â¢-M4 LOCKUP (Hardfault) output enable bit.

SPL

Bit 1: SRAM2 parity lock bit.

PVDL

Bit 2: PVD lock enable bit.

ECCL

Bit 3: ECC Lock.

SPF

Bit 8: SRAM2 parity error flag.

SWPR

Offset: 0x20, size: 32, reset: 0x00000000, access: write-only

0/32 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
P31WP w	P30WP w	P29WP w	P28WP w	P27WP w	P26WP w	P25WP w	P24WP w	P23WP w	P22WP w	P21WP w	P20WP w	P19WP w	P18WP w	P17WP w	P16WP w
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
P15WP w	P14WP w	P13WP w	P12WP w	P11WP w	P10WP w	P9WP w	P8WP w	P7WP w	P6WP w	P5WP w	P4WP w	P3WP w	P2WP w	P1WP w	P0WP w

Toggle fields

P0WP

Bit 0: P0WP.

P1WP

Bit 1: P1WP.

P2WP

Bit 2: P2WP.

P3WP

Bit 3: P3WP.

P4WP

Bit 4: P4WP.

P5WP

Bit 5: P5WP.

P6WP

Bit 6: P6WP.

P7WP

Bit 7: P7WP.

P8WP

Bit 8: P8WP.

P9WP

Bit 9: P9WP.

P10WP

Bit 10: P10WP.

P11WP

Bit 11: P11WP.

P12WP

Bit 12: P12WP.

P13WP

Bit 13: P13WP.

P14WP

Bit 14: P14WP.

P15WP

Bit 15: P15WP.

P16WP

Bit 16: P16WP.

P17WP

Bit 17: P17WP.

P18WP

Bit 18: P18WP.

P19WP

Bit 19: P19WP.

P20WP

Bit 20: P20WP.

P21WP

Bit 21: P21WP.

P22WP

Bit 22: P22WP.

P23WP

Bit 23: P23WP.

P24WP

Bit 24: P24WP.

P25WP

Bit 25: P25WP.

P26WP

Bit 26: P26WP.

P27WP

Bit 27: P27WP.

P28WP

Bit 28: P28WP.

P29WP

Bit 29: P29WP.

P30WP

Bit 30: P30WP.

P31WP

Bit 31: SRAM2 page 31 write protection.

SKR

Offset: 0x24, size: 32, reset: 0x00000000, access: write-only

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								KEY w

Toggle fields

KEY

Bits 0-7: SRAM2 write protection key for software erase.

TIM1

0x40012c00: Advanced-timers

102/164 fields covered.

Toggle register map

Offset	Name	31	30	29	24	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	CR1												CKD		ARPE	CMS		DIR	OPM	URS	UDIS	CEN
0x4	CR2							OIS[4]	OIS[3]N	OIS[3]	OIS[2]N	OIS[2]	OIS[1]N	OIS[1]	TI1S	MMS			CCDS	CCUS		CCPC
0x8	SMCR						ETP	ECE	ETPS		ETF				MSM	TS				SMS
0xc	DIER							TDE	COMDE	CC[4]DE	CC[3]DE	CC[2]DE	CC[1]DE	UDE	BIE	TIE	COMIE	CC[4]IE	CC[3]IE	CC[2]IE	CC[1]IE	UIE
0x10	SR									CC[4]OF	CC[3]OF	CC[2]OF	CC[1]OF		BIF	TIF	COMIF	CC[4]IF	CC[3]IF	CC[2]IF	CC[1]IF	UIF
0x14	EGR														BG	TG	COMG	CC[4]G	CC[3]G	CC[2]G	CC[1]G	UG
0x18	CCMR1_Input						IC[2]F				IC[2]PSC		CC[2]S		IC[1]F				IC[1]PSC		CC[1]S
0x18	CCMR1_Output				OC[2]M_3	OC[1]M_3	OC[2]CE	OC[2]M			OC[2]PE	OC[2]FE	CC[2]S		OC[1]CE	OC[1]M			OC[1]PE	OC[1]FE	CC[1]S
0x1c	CCMR2_Input						IC[4]F				IC[4]PSC		CC[4]S		IC[3]F				IC[3]PSC		CC[3]S
0x1c	CCMR2_Output				OC[4]M_3	OC[3]M_3	OC[4]CE	OC[4]M			OC[4]PE	OC[4]FE	CC[4]S		OC[3]CE	OC[3]M			OC[3]PE	OC[3]FE	CC[3]S
0x20	CCER								CC[4]P	CC[4]E	CC[3]NP	CC[3]NE	CC[3]P	CC[3]E	CC[2]NP	CC[2]NE	CC[2]P	CC[2]E	CC[1]NP	CC[1]NE	CC[1]P	CC[1]E
0x24	CNT						CNT
0x28	PSC						PSC
0x2c	ARR						ARR
0x30	RCR														REP
0x34	CCR[1]						CCR
0x38	CCR[2]						CCR
0x3c	CCR[3]						CCR
0x40	CCR[4]						CCR
0x44	BDTR						MOE	AOE	BKP	BKE	OSSR	OSSI	LOCK		DTG
0x48	DCR									DBL								DBA
0x4c	DMAR						DMAB
0x50	OR1																	TI1_RMP	ETR_ADC3_RMP		ETR_ADC1_RMP
0x54	CCMR3_Output				OC[6]M_3	OC[5]M_3	OC[6]CE	OC[6]M			OC[6]PE	OC[6]FE			OC[5]CE	OC[5]M			OC[5]PE	OC[5]FE
0x58	CCR5	GC5C3	GC5C2	GC5C1			CCR
0x5c	CCR6						CCR
0x60	OR2					ETRSEL	ETRSEL				BKCMP2P	BKCMP1P	BKINP	BKDFBK0E						BKCMP2E	BKCMP1E	BKINE
0x64	OR3										BK2CMP2P	BK2CMP1P	BK2INP	BK2DFBK0E						BK2CMP2E	BK2CMP1E	BK2INE

Toggle registers

CR1

control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
						CKD rw		ARPE rw	CMS rw		DIR rw	OPM rw	URS rw	UDIS rw	CEN rw

Toggle fields

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

DIR

Bit 4: Direction.

Allowed values:
0: Up: Counter used as upcounter
1: Down: Counter used as downcounter

CMS

Bits 5-6: Center-aligned mode selection.

Allowed values:
0: EdgeAligned: The counter counts up or down depending on the direction bit
1: CenterAligned1: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting down.
2: CenterAligned2: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting up.
3: CenterAligned3: The counter counts up and down alternatively. Output compare interrupt flags are set both when the counter is counting up or down.

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

CR2

control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

10/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	OIS[4] rw	OIS[3]N rw	OIS[3] rw	OIS[2]N rw	OIS[2] rw	OIS[1]N rw	OIS[1] rw	TI1S rw	MMS rw			CCDS rw	CCUS rw		CCPC rw

Toggle fields

CCPC

Bit 0: Capture/compare preloaded control.

CCUS

Bit 2: Capture/compare control update selection.

CCDS

Bit 3: Capture/compare DMA selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

MMS

Bits 4-6: Master mode selection.

Allowed values:
0: Reset: The UG bit from the TIMx_EGR register is used as trigger output
1: Enable: The counter enable signal, CNT_EN, is used as trigger output
2: Update: The update event is selected as trigger output
3: ComparePulse: The trigger output send a positive pulse when the CC1IF flag it to be set, as soon as a capture or a compare match occurred
4: CompareOC1: OC1REF signal is used as trigger output
5: CompareOC2: OC2REF signal is used as trigger output
6: CompareOC3: OC3REF signal is used as trigger output
7: CompareOC4: OC4REF signal is used as trigger output

TI1S

Bit 7: TI1 selection.

Allowed values:
0: Normal: The TIMx_CH1 pin is connected to TI1 input
1: XOR: The TIMx_CH1, CH2, CH3 pins are connected to TI1 input

OIS[1]

Bit 8: Output Idle state (OC1 output).

Allowed values:
0: Reset: OCx=0 (after a dead-time if OCx(N) is implemented) when MOE=0
1: Set: OCx=1 (after a dead-time if OCx(N) is implemented) when MOE=0

OIS[1]N

Bit 9: Output Idle state (OC1N output).

Allowed values:
0: Reset: OCxN=0 after a dead-time when MOE=0
1: Set: OCxN=1 after a dead-time when MOE=0

OIS[2]

Bit 10: Output Idle state (OC2 output).

Allowed values:
0: Reset: OCx=0 (after a dead-time if OCx(N) is implemented) when MOE=0
1: Set: OCx=1 (after a dead-time if OCx(N) is implemented) when MOE=0

OIS[2]N

Bit 11: Output Idle state (OC2N output).

Allowed values:
0: Reset: OCxN=0 after a dead-time when MOE=0
1: Set: OCxN=1 after a dead-time when MOE=0

OIS[3]

Bit 12: Output Idle state (OC3 output).

Allowed values:
0: Reset: OCx=0 (after a dead-time if OCx(N) is implemented) when MOE=0
1: Set: OCx=1 (after a dead-time if OCx(N) is implemented) when MOE=0

OIS[3]N

Bit 13: Output Idle state (OC3N output).

Allowed values:
0: Reset: OCxN=0 after a dead-time when MOE=0
1: Set: OCxN=1 after a dead-time when MOE=0

OIS[4]

Bit 14: Output Idle state (OC4 output).

Allowed values:
0: Reset: OCx=0 (after a dead-time if OCx(N) is implemented) when MOE=0
1: Set: OCx=1 (after a dead-time if OCx(N) is implemented) when MOE=0

SMCR

slave mode control register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

7/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ETP rw	ECE rw	ETPS rw		ETF rw				MSM rw	TS rw				SMS rw

Toggle fields

SMS

Bits 0-2: Slave mode selection.

Allowed values:
0: Disabled: Slave mode disabled - if CEN = ‘1 then the prescaler is clocked directly by the internal clock.
1: Encoder_Mode_1: Encoder mode 1 - Counter counts up/down on TI2FP1 edge depending on TI1FP2 level.
2: Encoder_Mode_2: Encoder mode 2 - Counter counts up/down on TI1FP2 edge depending on TI2FP1 level.
3: Encoder_Mode_3: Encoder mode 3 - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input.
4: Reset_Mode: Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter and generates an update of the registers.
5: Gated_Mode: Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled.
6: Trigger_Mode: Trigger Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled.
7: Ext_Clock_Mode: External Clock Mode 1 - Rising edges of the selected trigger (TRGI) clock the counter.

TS

Bits 4-6: Trigger selection.

Allowed values:
0: ITR0: Internal Trigger 0 (ITR0)
1: ITR1: Internal Trigger 1 (ITR1)
2: ITR2: Internal Trigger 2 (ITR2)
4: TI1F_ED: TI1 Edge Detector (TI1F_ED)
5: TI1FP1: Filtered Timer Input 1 (TI1FP1)
6: TI2FP2: Filtered Timer Input 2 (TI2FP2)
7: ETRF: External Trigger input (ETRF)

MSM

Bit 7: Master/Slave mode.

Allowed values:
0: NoSync: No action
1: Sync: The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between the current timer and its slaves (through TRGO). It is useful if we want to synchronize several timers on a single external event.

ETF

Bits 8-11: External trigger filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

ETPS

Bits 12-13: External trigger prescaler.

Allowed values:
0: Div1: Prescaler OFF
1: Div2: ETRP frequency divided by 2
2: Div4: ETRP frequency divided by 4
3: Div8: ETRP frequency divided by 8

ECE

Bit 14: External clock enable.

Allowed values:
0: Disabled: External clock mode 2 disabled
1: Enabled: External clock mode 2 enabled. The counter is clocked by any active edge on the ETRF signal.

ETP

Bit 15: External trigger polarity.

Allowed values:
0: NotInverted: ETR is noninverted, active at high level or rising edge
1: Inverted: ETR is inverted, active at low level or falling edge

DIER

DMA/Interrupt enable register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

12/15 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	TDE rw	COMDE rw	CC[4]DE rw	CC[3]DE rw	CC[2]DE rw	CC[1]DE rw	UDE rw	BIE rw	TIE rw	COMIE rw	CC[4]IE rw	CC[3]IE rw	CC[2]IE rw	CC[1]IE rw	UIE rw

Toggle fields

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC[1]IE

Bit 1: Capture/Compare 1 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC[2]IE

Bit 2: Capture/Compare 2 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC[3]IE

Bit 3: Capture/Compare 3 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC[4]IE

Bit 4: Capture/Compare 4 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

COMIE

Bit 5: COM interrupt enable.

TIE

Bit 6: Trigger interrupt enable.

Allowed values:
0: Disabled: Trigger interrupt disabled
1: Enabled: Trigger interrupt enabled

BIE

Bit 7: Break interrupt enable.

UDE

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CC[1]DE

Bit 9: Capture/Compare 1 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC[2]DE

Bit 10: Capture/Compare 2 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC[3]DE

Bit 11: Capture/Compare 3 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC[4]DE

Bit 12: Capture/Compare 4 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

COMDE

Bit 13: COM DMA request enable.

TDE

Bit 14: Trigger DMA request enable.

Allowed values:
0: Disabled: Trigger DMA request disabled
1: Enabled: Trigger DMA request enabled

SR

status register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

10/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			CC[4]OF rw	CC[3]OF rw	CC[2]OF rw	CC[1]OF rw		BIF rw	TIF rw	COMIF rw	CC[4]IF rw	CC[3]IF rw	CC[2]IF rw	CC[1]IF rw	UIF rw

Toggle fields

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: NoUpdateOccurred: No update occurred
1: UpdatePending: Update interrupt pending

CC[1]IF

Bit 1: Capture/compare 1 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC[2]IF

Bit 2: Capture/compare 2 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC[3]IF

Bit 3: Capture/compare 3 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC[4]IF

Bit 4: Capture/compare 4 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

COMIF

Bit 5: COM interrupt flag.

TIF

Bit 6: Trigger interrupt flag.

Allowed values:
0: NoTrigger: No trigger event occurred
1: Trigger: Trigger interrupt pending

BIF

Bit 7: Break interrupt flag.

CC[1]OF

Bit 9: Capture/Compare 1 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC[2]OF

Bit 10: Capture/Compare 2 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC[3]OF

Bit 11: Capture/Compare 3 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC[4]OF

Bit 12: Capture/Compare 4 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

EGR

event generation register

Offset: 0x14, size: 32, reset: 0x00000000, access: write-only

6/8 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								BG w	TG w	COMG w	CC[4]G w	CC[3]G w	CC[2]G w	CC[1]G w	UG w

Toggle fields

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CC[1]G

Bit 1: Capture/compare 1 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC[2]G

Bit 2: Capture/compare 2 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC[3]G

Bit 3: Capture/compare 3 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC[4]G

Bit 4: Capture/compare 4 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

COMG

Bit 5: Capture/Compare control update generation.

TG

Bit 6: Trigger generation.

Allowed values:
1: Trigger: The TIF flag is set in TIMx_SR register. Related interrupt or DMA transfer can occur if enabled.

BG

Bit 7: Break generation.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

4/6 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IC[2]F rw				IC[2]PSC rw		CC[2]S rw		IC[1]F rw				IC[1]PSC rw		CC[1]S rw

Toggle fields

CC[1]S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
1: TI1: CC1 channel is configured as input, IC1 is mapped on TI1
2: TI2: CC1 channel is configured as input, IC1 is mapped on TI2
3: TRC: CC1 channel is configured as input, IC1 is mapped on TRC

IC[1]PSC

Bits 2-3: Input capture 1 prescaler.

IC[1]F

Bits 4-7: Input capture 1 filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

CC[2]S

Bits 8-9: Capture/Compare 2 selection.

Allowed values:
1: TI1: CC1 channel is configured as input, IC1 is mapped on TI1
2: TI2: CC1 channel is configured as input, IC1 is mapped on TI2
3: TRC: CC1 channel is configured as input, IC1 is mapped on TRC

IC[2]PSC

Bits 10-11: Input capture 2 prescaler.

IC[2]F

Bits 12-15: Input capture 2 filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

CCMR1_Output

capture/compare mode register 1 (output mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

8/12 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
							OC[2]M_3 rw								OC[1]M_3 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OC[2]CE rw	OC[2]M rw			OC[2]PE rw	OC[2]FE rw	CC[2]S rw		OC[1]CE rw	OC[1]M rw			OC[1]PE rw	OC[1]FE rw	CC[1]S rw

Toggle fields

CC[1]S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
0: Output: CC1 channel is configured as output

OC[1]FE

Bit 2: Output compare 1 fast enable.

OC[1]PE

Bit 3: Output compare 1 preload enable.

Allowed values:
0: Disabled: Preload register on CCR1 disabled. New values written to CCR1 are taken into account immediately
1: Enabled: Preload register on CCR1 enabled. Preload value is loaded into active register on each update event

OC[1]M

Bits 4-6: Output compare 1 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC[1]CE

Bit 7: Output compare 1 clear enable.

CC[2]S

Bits 8-9: Capture/Compare 2 selection.

Allowed values:
0: Output: CC1 channel is configured as output

OC[2]FE

Bit 10: Output compare 2 fast enable.

OC[2]PE

Bit 11: Output compare 2 preload enable.

Allowed values:
0: Disabled: Preload register on CCR1 disabled. New values written to CCR1 are taken into account immediately
1: Enabled: Preload register on CCR1 enabled. Preload value is loaded into active register on each update event

OC[2]M

Bits 12-14: Output compare 2 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC[2]CE

Bit 15: Output compare 2 clear enable.

OC[1]M_3

Bit 16: Output compare 1 mode, bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

OC[2]M_3

Bit 24: Output compare 2 mode, bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

CCMR2_Input

capture/compare mode register 2 (input mode)

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

6/6 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IC[4]F rw				IC[4]PSC rw		CC[4]S rw		IC[3]F rw				IC[3]PSC rw		CC[3]S rw

Toggle fields

CC[3]S

Bits 0-1: Capture/Compare 3 selection.

Allowed values:
1: TI3: CC3 channel is configured as input, IC3 is mapped on TI3
2: TI4: CC3 channel is configured as input, IC3 is mapped on TI4
3: TRC: CC3 channel is configured as input, IC3 is mapped on TRC

IC[3]PSC

Bits 2-3: Input capture 3 prescaler.

Allowed values: 0x0-0x3

IC[3]F

Bits 4-7: Input capture 3 filter.

Allowed values: 0x0-0xf

CC[4]S

Bits 8-9: Capture/Compare 4 selection.

Allowed values:
1: TI3: CC3 channel is configured as input, IC3 is mapped on TI3
2: TI4: CC3 channel is configured as input, IC3 is mapped on TI4
3: TRC: CC3 channel is configured as input, IC3 is mapped on TRC

IC[4]PSC

Bits 10-11: Input capture 4 prescaler.

Allowed values: 0x0-0x3

IC[4]F

Bits 12-15: Input capture 4 filter.

Allowed values: 0x0-0xf

CCMR2_Output

capture/compare mode register 2 (output mode)

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

8/12 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
							OC[4]M_3 rw								OC[3]M_3 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OC[4]CE rw	OC[4]M rw			OC[4]PE rw	OC[4]FE rw	CC[4]S rw		OC[3]CE rw	OC[3]M rw			OC[3]PE rw	OC[3]FE rw	CC[3]S rw

Toggle fields

CC[3]S

Bits 0-1: Capture/Compare 3 selection.

Allowed values:
0: Output: CC3 channel is configured as output

OC[3]FE

Bit 2: Output compare 3 fast enable.

OC[3]PE

Bit 3: Output compare 3 preload enable.

Allowed values:
0: Disabled: Preload register on CCR3 disabled. New values written to CCR3 are taken into account immediately
1: Enabled: Preload register on CCR3 enabled. Preload value is loaded into active register on each update event

OC[3]M

Bits 4-6: Output compare 3 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC[3]CE

Bit 7: Output compare 3 clear enable.

CC[4]S

Bits 8-9: Capture/Compare 4 selection.

Allowed values:
0: Output: CC3 channel is configured as output

OC[4]FE

Bit 10: Output compare 4 fast enable.

OC[4]PE

Bit 11: Output compare 4 preload enable.

Allowed values:
0: Disabled: Preload register on CCR3 disabled. New values written to CCR3 are taken into account immediately
1: Enabled: Preload register on CCR3 enabled. Preload value is loaded into active register on each update event

OC[4]M

Bits 12-14: Output compare 4 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC[4]CE

Bit 15: Output compare 4 clear enable.

OC[3]M_3

Bit 16: Output compare 3 mode, bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

OC[4]M_3

Bit 24: Output compare 4 mode, bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

CCER

capture/compare enable register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

0/14 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		CC[4]P rw	CC[4]E rw	CC[3]NP rw	CC[3]NE rw	CC[3]P rw	CC[3]E rw	CC[2]NP rw	CC[2]NE rw	CC[2]P rw	CC[2]E rw	CC[1]NP rw	CC[1]NE rw	CC[1]P rw	CC[1]E rw

Toggle fields

CC[1]E

Bit 0: Capture/Compare 1 output enable.

CC[1]P

Bit 1: Capture/Compare 1 output Polarity.

CC[1]NE

Bit 2: Capture/Compare 1 complementary output enable.

CC[1]NP

Bit 3: Capture/Compare 1 output Polarity.

CC[2]E

Bit 4: Capture/Compare 2 output enable.

CC[2]P

Bit 5: Capture/Compare 2 output Polarity.

CC[2]NE

Bit 6: Capture/Compare 2 complementary output enable.

CC[2]NP

Bit 7: Capture/Compare 2 output Polarity.

CC[3]E

Bit 8: Capture/Compare 3 output enable.

CC[3]P

Bit 9: Capture/Compare 3 output Polarity.

CC[3]NE

Bit 10: Capture/Compare 3 complementary output enable.

CC[3]NP

Bit 11: Capture/Compare 3 output Polarity.

CC[4]E

Bit 12: Capture/Compare 4 output enable.

CC[4]P

Bit 13: Capture/Compare 4 output Polarity.

CNT

counter

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CNT rw

Toggle fields

CNT

Bits 0-15: counter value.

Allowed values: 0x0-0xffff

PSC

prescaler

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PSC rw

Toggle fields

PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ARR rw

Toggle fields

ARR

Bits 0-15: Auto-reload value.

Allowed values: 0x0-0xffff

RCR

repetition counter register

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								REP rw

Toggle fields

REP

Bits 0-7: Repetition counter value.

CCR[1]

capture/compare register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CCR rw

Toggle fields

CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

CCR[2]

capture/compare register

Offset: 0x38, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CCR rw

Toggle fields

CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

CCR[3]

capture/compare register

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CCR rw

Toggle fields

CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

CCR[4]

capture/compare register

Offset: 0x40, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CCR rw

Toggle fields

CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

BDTR

break and dead-time register

Offset: 0x44, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MOE rw	AOE rw	BKP rw	BKE rw	OSSR rw	OSSI rw	LOCK rw		DTG rw

Toggle fields

DTG

Bits 0-7: Dead-time generator setup.

Allowed values: 0x0-0xff

LOCK

Bits 8-9: Lock configuration.

Allowed values:
0: Off: No bit is write protected
1: Level1: Any bits except MOE, OSSR, OSSI and LOCK in TIMx_BDTR register, OISx and OISxN bits in TIMx_CR2 register can no longer be written
2: Level2: LOCK Level 1 + CC Polarity bits (CCxP/CCxNP bits in TIMx_CCER register, as long as the related channel is configured in output through the CCxS bits) as well as OSSR and OSSI bits can no longer be written
3: Level3: LOCK Level 2 + CC Control bits (OCxM and OCxPE bits in TIMx_CCMRx registers, as long as the related channel is configured in output through the CCxS bits) can no longer be written

OSSI

Bit 10: Off-state selection for Idle mode.

Allowed values:
0: Disabled: When inactive, OC/OCN outputs are disabled
1: IdleLevel: When inactive, OC/OCN outputs are forced to idle level

OSSR

Bit 11: Off-state selection for Run mode.

Allowed values:
0: Disabled: When inactive, OC/OCN outputs are disabled
1: IdleLevel: When inactive, OC/OCN outputs are enabled with their inactive level

BKE

Bit 12: Break enable.

Allowed values:
0: Disabled: Break function x disabled
1: Enabled: Break function x disabled

BKP

Bit 13: Break polarity.

Allowed values:
0: ActiveLow: Break input BRKx is active low
1: ActiveHigh: Break input BRKx is active high

AOE

Bit 14: Automatic output enable.

Allowed values:
0: Manual: MOE can be set only by software
1: Automatic: MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active)

MOE

Bit 15: Main output enable.

Allowed values:
0: DisabledIdle: OC/OCN are disabled or forced idle depending on OSSI
1: Enabled: OC/OCN are enabled if CCxE/CCxNE are set

DCR

DMA control register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			DBL rw								DBA rw

Toggle fields

DBA

Bits 0-4: DMA base address.

Allowed values: 0x0-0x1f

DBL

Bits 8-12: DMA burst length.

Allowed values: 0x0-0x12

DMAR

DMA address for full transfer

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DMAB rw

Toggle fields

DMAB

Bits 0-15: DMA register for burst accesses.

OR1

DMA address for full transfer

Offset: 0x50, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
											TI1_RMP rw	ETR_ADC3_RMP rw		ETR_ADC1_RMP rw

Toggle fields

ETR_ADC1_RMP

Bits 0-1: External trigger remap on ADC1 analog watchdog.

ETR_ADC3_RMP

Bits 2-3: External trigger remap on ADC3 analog watchdog.

TI1_RMP

Bit 4: Input Capture 1 remap.

CCMR3_Output

capture/compare mode register 2 (output mode)

Offset: 0x54, size: 32, reset: 0x00000000, access: read-write

4/10 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
							OC[6]M_3 rw								OC[5]M_3 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OC[6]CE rw	OC[6]M rw			OC[6]PE rw	OC[6]FE rw			OC[5]CE rw	OC[5]M rw			OC[5]PE rw	OC[5]FE rw

Toggle fields

OC[5]FE

Bit 2: Output compare 5 fast enable.

OC[5]PE

Bit 3: Output compare 5 preload enable.

OC[5]M

Bits 4-6: Output compare 5 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC[5]CE

Bit 7: Output compare 5 clear enable.

OC[6]FE

Bit 10: Output compare 6 fast enable.

OC[6]PE

Bit 11: Output compare 6 preload enable.

OC[6]M

Bits 12-14: Output compare 6 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC[6]CE

Bit 15: Output compare 6 clear enable.

OC[5]M_3

Bit 16: Output compare 5 mode, bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

OC[6]M_3

Bit 24: Output compare 6 mode, bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

CCR5

capture/compare register

Offset: 0x58, size: 32, reset: 0x00000000, access: read-write

1/4 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
GC5C3 rw	GC5C2 rw	GC5C1 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CCR rw

Toggle fields

CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

GC5C1

Bit 29: Group Channel 5 and Channel 1.

GC5C2

Bit 30: Group Channel 5 and Channel 2.

GC5C3

Bit 31: Group Channel 5 and Channel 3.

CCR6

capture/compare register

Offset: 0x5c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CCR rw

Toggle fields

CCR

Bits 0-15: Capture/Compare value.

Allowed values: 0x0-0xffff

OR2

DMA address for full transfer

Offset: 0x60, size: 32, reset: 0x00000001, access: read-write

0/8 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
															ETRSEL rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ETRSEL rw				BKCMP2P rw	BKCMP1P rw	BKINP rw	BKDFBK0E rw						BKCMP2E rw	BKCMP1E rw	BKINE rw

Toggle fields

BKINE

Bit 0: BRK BKIN input enable.

BKCMP1E

Bit 1: BRK COMP1 enable.

BKCMP2E

Bit 2: BRK COMP2 enable.

BKDFBK0E

Bit 8: BRK DFSDM_BREAK0 enable.

BKINP

Bit 9: BRK BKIN input polarity.

BKCMP1P

Bit 10: BRK COMP1 input polarity.

BKCMP2P

Bit 11: BRK COMP2 input polarity.

ETRSEL

Bits 14-16: ETR source selection.

OR3

DMA address for full transfer

Offset: 0x64, size: 32, reset: 0x00000001, access: read-write

0/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				BK2CMP2P rw	BK2CMP1P rw	BK2INP rw	BK2DFBK0E rw						BK2CMP2E rw	BK2CMP1E rw	BK2INE rw

Toggle fields

BK2INE

Bit 0: BRK2 BKIN input enable.

BK2CMP1E

Bit 1: BRK2 COMP1 enable.

BK2CMP2E

Bit 2: BRK2 COMP2 enable.

BK2DFBK0E

Bit 8: BRK2 DFSDM_BREAK0 enable.

BK2INP

Bit 9: BRK2 BKIN input polarity.

BK2CMP1P

Bit 10: BRK2 COMP1 input polarity.

BK2CMP2P

Bit 11: BRK2 COMP2 input polarity.

TIM15

0x40014000: General purpose timers

13/62 fields covered.

Toggle register map

Offset	Name	31	19	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	CR1								UIFREMAP		CKD		ARPE				OPM	URS	UDIS	CEN
0x4	CR2										OIS1N	OIS1					CCDS	CCUS		CCPC
0xc	DIER					TDE	COMDE				CC[1]DE	UDE	BIE	TIE	COMIE				CC[1]IE	UIE
0x10	SR										CC[1]OF		BIF	TIF	COMIF				CC[1]IF	UIF
0x14	EGR												BG	TG	COMG				CC[1]G	UG
0x18	CCMR1_Input												IC[1]F				IC[1]PSC		CC[1]S
0x18	CCMR1_Output			OC[1]M_3										OC[1]M			OC[1]PE	OC[1]FE	CC[1]S
0x20	CCER																CC[1]NP	CC[1]NE	CC[1]P	CC[1]E
0x24	CNT	UIFCPY			CNT
0x28	PSC				PSC
0x2c	ARR				ARR
0x30	RCR												REP
0x34	CCR[1]				CCR
0x44	BDTR		BKF		MOE	AOE	BKP	BKE	OSSR	OSSI	LOCK		DTG
0x48	DCR							DBL								DBA
0x4c	DMAR				DMAB

Toggle registers

CR1

control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

6/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				UIFREMAP rw		CKD rw		ARPE rw				OPM rw	URS rw	UDIS rw	CEN rw

Toggle fields

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

UIFREMAP

Bit 11: UIF status bit remapping.

CR2

control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

0/5 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
						OIS1N rw	OIS1 rw					CCDS rw	CCUS rw		CCPC rw

Toggle fields

CCPC

Bit 0: Capture/compare preloaded control.

CCUS

Bit 2: Capture/compare control update selection.

CCDS

Bit 3: Capture/compare DMA selection.

OIS1

Bit 8: Output Idle state 1.

OIS1N

Bit 9: Output Idle state 1.

DIER

DMA/Interrupt enable register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/9 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	TDE rw	COMDE rw				CC[1]DE rw	UDE rw	BIE rw	TIE rw	COMIE rw				CC[1]IE rw	UIE rw

Toggle fields

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC[1]IE

Bit 1: Capture/Compare 1 interrupt enable.

COMIE

Bit 5: COM interrupt enable.

TIE

Bit 6: Trigger interrupt enable.

BIE

Bit 7: Break interrupt enable.

UDE

Bit 8: Update DMA request enable.

CC[1]DE

Bit 9: Capture/Compare 1 DMA request enable.

COMDE

Bit 13: COM DMA request enable.

TDE

Bit 14: Trigger DMA request enable.

SR

status register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

1/6 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
						CC[1]OF rw		BIF rw	TIF rw	COMIF rw				CC[1]IF rw	UIF rw

Toggle fields

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: NoUpdateOccurred: No update occurred
1: UpdatePending: Update interrupt pending

CC[1]IF

Bit 1: Capture/compare 1 interrupt flag.

COMIF

Bit 5: COM interrupt flag.

TIF

Bit 6: Trigger interrupt flag.

BIF

Bit 7: Break interrupt flag.

CC[1]OF

Bit 9: Capture/Compare 1 overcapture flag.

EGR

event generation register

Offset: 0x14, size: 32, reset: 0x00000000, access: write-only

1/5 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								BG w	TG w	COMG w				CC[1]G w	UG w

Toggle fields

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CC[1]G

Bit 1: Capture/compare 1 generation.

COMG

Bit 5: Capture/Compare control update generation.

TG

Bit 6: Trigger generation.

BG

Bit 7: Break generation.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								IC[1]F rw				IC[1]PSC rw		CC[1]S rw

Toggle fields

CC[1]S

Bits 0-1: Capture/Compare 1 selection.

IC[1]PSC

Bits 2-3: Input capture 1 prescaler.

IC[1]F

Bits 4-7: Input capture 1 filter.

CCMR1_Output

capture/compare mode register (output mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

2/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
															OC[1]M_3 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									OC[1]M rw			OC[1]PE rw	OC[1]FE rw	CC[1]S rw

Toggle fields

CC[1]S

Bits 0-1: Capture/Compare 1 selection.

OC[1]FE

Bit 2: Output compare 1 fast enable.

OC[1]PE

Bit 3: Output compare 1 preload enable.

OC[1]M

Bits 4-6: Output compare 1 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active / Reserved
7: PwmMode2: Inversely to PwmMode1 / Reserved

OC[1]M_3

Bit 16: Output compare 1 mode, bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

CCER

capture/compare enable register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
												CC[1]NP rw	CC[1]NE rw	CC[1]P rw	CC[1]E rw

Toggle fields

CC[1]E

Bit 0: Capture/Compare 1 output enable.

CC[1]P

Bit 1: Capture/Compare 1 output Polarity.

CC[1]NE

Bit 2: Capture/Compare 1 complementary output enable.

CC[1]NP

Bit 3: Capture/Compare 1 output Polarity.

CNT

counter

Offset: 0x24, size: 32, reset: 0x00000000, access: Unspecified

1/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
UIFCPY r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CNT rw

Toggle fields

CNT

Bits 0-15: counter value.

UIFCPY

Bit 31: UIF Copy.

PSC

prescaler

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PSC rw

Toggle fields

PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ARR rw

Toggle fields

ARR

Bits 0-15: Auto-reload value.

RCR

repetition counter register

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								REP rw

Toggle fields

REP

Bits 0-7: Repetition counter value.

CCR[1]

capture/compare register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CCR rw

Toggle fields

CCR

Bits 0-15: Capture/Compare value.

BDTR

break and dead-time register

Offset: 0x44, size: 32, reset: 0x00000000, access: read-write

0/9 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
												BKF rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MOE rw	AOE rw	BKP rw	BKE rw	OSSR rw	OSSI rw	LOCK rw		DTG rw

Toggle fields

DTG

Bits 0-7: Dead-time generator setup.

LOCK

Bits 8-9: Lock configuration.

OSSI

Bit 10: Off-state selection for Idle mode.

OSSR

Bit 11: Off-state selection for Run mode.

BKE

Bit 12: Break enable.

BKP

Bit 13: Break polarity.

AOE

Bit 14: Automatic output enable.

MOE

Bit 15: Main output enable.

BKF

Bits 16-19: Break filter.

DCR

DMA control register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			DBL rw								DBA rw

Toggle fields

DBA

Bits 0-4: DMA base address.

DBL

Bits 8-12: DMA burst length.

DMAR

DMA address for full transfer

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DMAB rw

Toggle fields

DMAB

Bits 0-15: DMA register for burst accesses.

TIM16

0x40014400: General purpose timers

21/70 fields covered.

Toggle register map

Offset	Name	31	19	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	CR1								UIFREMAP		CKD		ARPE				OPM	URS	UDIS	CEN
0x4	CR2										OIS1N	OIS1					CCDS	CCUS		CCPC
0xc	DIER					TDE	COMDE				CC[1]DE	UDE	BIE	TIE	COMIE				CC[1]IE	UIE
0x10	SR										CC[1]OF		BIF	TIF	COMIF				CC[1]IF	UIF
0x14	EGR												BG	TG	COMG				CC[1]G	UG
0x18	CCMR1_Input												IC[1]F				IC[1]PSC		CC[1]S
0x18	CCMR1_Output			OC1M_2										OC[1]M			OC[1]PE	OC[1]FE	CC[1]S
0x20	CCER																CC[1]NP	CC[1]NE	CC[1]P	CC[1]E
0x24	CNT	UIFCPY			CNT
0x28	PSC				PSC
0x2c	ARR				ARR
0x30	RCR												REP
0x34	CCR[1]				CCR
0x44	BDTR		BKF		MOE	AOE	BKP	BKE	OSSR	OSSI	LOCK		DTG
0x48	DCR							DBL								DBA
0x4c	DMAR				DMAB
0x50	OR1																		TI1_RMP
0x60	OR2								BKCMP2P	BKCMP1P	BKINP	BKDFBK1E						BKCMP2E	BKCMP1E	BKINE

Toggle registers

CR1

control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

6/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				UIFREMAP rw		CKD rw		ARPE rw				OPM rw	URS rw	UDIS rw	CEN rw

Toggle fields

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

UIFREMAP

Bit 11: UIF status bit remapping.

CR2

control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
						OIS1N rw	OIS1 rw					CCDS rw	CCUS rw		CCPC rw

Toggle fields

CCPC

Bit 0: Capture/compare preloaded control.

Allowed values:
0: NotPreloaded: CCxE, CCxNE and OCxM bits are not preloaded
1: Preloaded: CCxE, CCxNE and OCxM bits are preloaded

CCUS

Bit 2: Capture/compare control update selection.

Allowed values:
0: Default: Capture/compare are updated only by setting the COMG bit
1: WithRisingEdge: Capture/compare are updated by setting the COMG bit or when an rising edge occurs on TRGI

CCDS

Bit 3: Capture/compare DMA selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

OIS1

Bit 8: Output Idle state 1.

Allowed values:
0: Reset: OC1=0 (after a dead-time if OC1N is implemented) when MOE=0
1: Set: OC1=1 (after a dead-time if OC1N is implemented) when MOE=0

OIS1N

Bit 9: Output Idle state 1.

Allowed values:
0: Reset: OC1N=0 after a dead-time when MOE=0
1: Set: OC1N=1 after a dead-time when MOE=0

DIER

DMA/Interrupt enable register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

5/9 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	TDE rw	COMDE rw				CC[1]DE rw	UDE rw	BIE rw	TIE rw	COMIE rw				CC[1]IE rw	UIE rw

Toggle fields

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC[1]IE

Bit 1: Capture/Compare 1 interrupt enable.

Allowed values:
0: Disabled: CC1 interrupt disabled
1: Enabled: CC1 interrupt enabled

COMIE

Bit 5: COM interrupt enable.

Allowed values:
0: Disabled: COM interrupt disabled
1: Enabled: COM interrupt enabled

TIE

Bit 6: Trigger interrupt enable.

BIE

Bit 7: Break interrupt enable.

Allowed values:
0: Disabled: Break interrupt disabled
1: Enabled: Break interrupt enabled

UDE

Bit 8: Update DMA request enable.

CC[1]DE

Bit 9: Capture/Compare 1 DMA request enable.

Allowed values:
0: Disabled: CC1 DMA request disabled
1: Enabled: CC1 DMA request enabled

COMDE

Bit 13: COM DMA request enable.

TDE

Bit 14: Trigger DMA request enable.

SR

status register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

1/6 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
						CC[1]OF rw		BIF rw	TIF rw	COMIF rw				CC[1]IF rw	UIF rw

Toggle fields

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: NoUpdateOccurred: No update occurred
1: UpdatePending: Update interrupt pending

CC[1]IF

Bit 1: Capture/compare 1 interrupt flag.

COMIF

Bit 5: COM interrupt flag.

TIF

Bit 6: Trigger interrupt flag.

BIF

Bit 7: Break interrupt flag.

CC[1]OF

Bit 9: Capture/Compare 1 overcapture flag.

EGR

event generation register

Offset: 0x14, size: 32, reset: 0x00000000, access: write-only

1/5 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								BG w	TG w	COMG w				CC[1]G w	UG w

Toggle fields

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CC[1]G

Bit 1: Capture/compare 1 generation.

COMG

Bit 5: Capture/Compare control update generation.

TG

Bit 6: Trigger generation.

BG

Bit 7: Break generation.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

0/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								IC[1]F rw				IC[1]PSC rw		CC[1]S rw

Toggle fields

CC[1]S

Bits 0-1: Capture/Compare 1 selection.

IC[1]PSC

Bits 2-3: Input capture 1 prescaler.

IC[1]F

Bits 4-7: Input capture 1 filter.

CCMR1_Output

capture/compare mode register (output mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

1/5 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
															OC1M_2 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									OC[1]M rw			OC[1]PE rw	OC[1]FE rw	CC[1]S rw

Toggle fields

CC[1]S

Bits 0-1: Capture/Compare 1 selection.

OC[1]FE

Bit 2: Output compare 1 fast enable.

OC[1]PE

Bit 3: Output compare 1 preload enable.

OC[1]M

Bits 4-6: Output compare 1 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy
4: ForceInactive: OCyREF is forced low
5: ForceActive: OCyREF is forced high
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active
7: PwmMode2: Inversely to PwmMode1

OC1M_2

Bit 16: Output Compare 1 mode.

CCER

capture/compare enable register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

0/4 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
												CC[1]NP rw	CC[1]NE rw	CC[1]P rw	CC[1]E rw

Toggle fields

CC[1]E

Bit 0: Capture/Compare 1 output enable.

CC[1]P

Bit 1: Capture/Compare 1 output Polarity.

CC[1]NE

Bit 2: Capture/Compare 1 complementary output enable.

CC[1]NP

Bit 3: Capture/Compare 1 output Polarity.

CNT

counter

Offset: 0x24, size: 32, reset: 0x00000000, access: Unspecified

1/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
UIFCPY r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CNT rw

Toggle fields

CNT

Bits 0-15: counter value.

UIFCPY

Bit 31: UIF Copy.

PSC

prescaler

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PSC rw

Toggle fields

PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ARR rw

Toggle fields

ARR

Bits 0-15: Auto-reload value.

RCR

repetition counter register

Offset: 0x30, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								REP rw

Toggle fields

REP

Bits 0-7: Repetition counter value.

CCR[1]

capture/compare register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CCR rw

Toggle fields

CCR

Bits 0-15: Capture/Compare value.

BDTR

break and dead-time register

Offset: 0x44, size: 32, reset: 0x00000000, access: read-write

0/9 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
												BKF rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
MOE rw	AOE rw	BKP rw	BKE rw	OSSR rw	OSSI rw	LOCK rw		DTG rw

Toggle fields

DTG

Bits 0-7: Dead-time generator setup.

LOCK

Bits 8-9: Lock configuration.

OSSI

Bit 10: Off-state selection for Idle mode.

OSSR

Bit 11: Off-state selection for Run mode.

BKE

Bit 12: Break enable.

BKP

Bit 13: Break polarity.

AOE

Bit 14: Automatic output enable.

MOE

Bit 15: Main output enable.

BKF

Bits 16-19: Break filter.

DCR

DMA control register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			DBL rw								DBA rw

Toggle fields

DBA

Bits 0-4: DMA base address.

DBL

Bits 8-12: DMA burst length.

DMAR

DMA address for full transfer

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DMAB rw

Toggle fields

DMAB

Bits 0-15: DMA register for burst accesses.

OR1

TIM16 option register 1

Offset: 0x50, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
														TI1_RMP rw

Toggle fields

TI1_RMP

Bits 0-1: Input capture 1 remap.

OR2

TIM17 option register 1

Offset: 0x60, size: 32, reset: 0x00000000, access: read-write

0/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
				BKCMP2P rw	BKCMP1P rw	BKINP rw	BKDFBK1E rw						BKCMP2E rw	BKCMP1E rw	BKINE rw

Toggle fields

BKINE

Bit 0: BRK BKIN input enable.

BKCMP1E

Bit 1: BRK COMP1 enable.

BKCMP2E

Bit 2: BRK COMP2 enable.

BKDFBK1E

Bit 8: BRK DFSDM_BREAK1 enable.

BKINP

Bit 9: BRK BKIN input polarity.

BKCMP1P

Bit 10: BRK COMP1 input polarity.

BKCMP2P

Bit 11: BRK COMP2 input polarit.

TIM2

0x40000000: General-purpose-timers

81/107 fields covered.

Toggle register map

Offset	Name	31	24	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	CR1										CKD		ARPE	CMS		DIR	OPM	URS	UDIS	CEN
0x4	CR2												TI1S	MMS			CCDS
0x8	SMCR				ETP	ECE	ETPS		ETF				MSM	TS				SMS
0xc	DIER					TDE	COMDE	CC[4]DE	CC[3]DE	CC[2]DE	CC[1]DE	UDE		TIE		CC[4]IE	CC[3]IE	CC[2]IE	CC[1]IE	UIE
0x10	SR							CC[4]OF	CC[3]OF	CC[2]OF	CC[1]OF			TIF		CC[4]IF	CC[3]IF	CC[2]IF	CC[1]IF	UIF
0x14	EGR													TG		CC[4]G	CC[3]G	CC[2]G	CC[1]G	UG
0x18	CCMR1_Input				IC[2]F				IC[2]PSC		CC[2]S		IC[1]F				IC[1]PSC		CC[1]S
0x18	CCMR1_Output		OC[2]M_3	OC[1]M_3	OC[2]CE	OC[2]M			OC[2]PE	OC[2]FE	CC[2]S		OC[1]CE	OC[1]M			OC[1]PE	OC[1]FE	CC[1]S
0x1c	CCMR2_Input				IC[4]F				IC[4]PSC		CC[4]S		IC[3]F				IC[3]PSC		CC[3]S
0x1c	CCMR2_Output		OC[4]M_3	OC[3]M_3	OC[4]CE	OC[4]M			OC[4]PE	OC[4]FE	CC[4]S		OC[3]CE	OC[3]M			OC[3]PE	OC[3]FE	CC[3]S
0x20	CCER				CC[4]NP		CC[4]P	CC[4]E	CC[3]NP		CC[3]P	CC[3]E	CC[2]NP		CC[2]P	CC[2]E	CC[1]NP		CC[1]P	CC[1]E
0x24	CNT	CNT			CNT
0x28	PSC				PSC
0x2c	ARR	ARR			ARR
0x34	CCR[1]	CCR			CCR
0x38	CCR[2]	CCR			CCR
0x3c	CCR[3]	CCR			CCR
0x40	CCR[4]	CCR			CCR
0x48	DCR							DBL								DBA
0x4c	DMAR				DMAB
0x50	OR															TI4_RMP		ETR_RMP

Toggle registers

CR1

control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

8/8 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
						CKD rw		ARPE rw	CMS rw		DIR rw	OPM rw	URS rw	UDIS rw	CEN rw

Toggle fields

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

DIR

Bit 4: Direction.

Allowed values:
0: Up: Counter used as upcounter
1: Down: Counter used as downcounter

CMS

Bits 5-6: Center-aligned mode selection.

Allowed values:
0: EdgeAligned: The counter counts up or down depending on the direction bit
1: CenterAligned1: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting down.
2: CenterAligned2: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting up.
3: CenterAligned3: The counter counts up and down alternatively. Output compare interrupt flags are set both when the counter is counting up or down.

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CKD

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

CR2

control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

3/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								TI1S rw	MMS rw			CCDS rw

Toggle fields

CCDS

Bit 3: Capture/compare DMA selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

MMS

Bits 4-6: Master mode selection.

Allowed values:
0: Reset: The UG bit from the TIMx_EGR register is used as trigger output
1: Enable: The counter enable signal, CNT_EN, is used as trigger output
2: Update: The update event is selected as trigger output
3: ComparePulse: The trigger output send a positive pulse when the CC1IF flag it to be set, as soon as a capture or a compare match occurred
4: CompareOC1: OC1REF signal is used as trigger output
5: CompareOC2: OC2REF signal is used as trigger output
6: CompareOC3: OC3REF signal is used as trigger output
7: CompareOC4: OC4REF signal is used as trigger output

TI1S

Bit 7: TI1 selection.

Allowed values:
0: Normal: The TIMx_CH1 pin is connected to TI1 input
1: XOR: The TIMx_CH1, CH2, CH3 pins are connected to TI1 input

SMCR

slave mode control register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

7/7 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ETP rw	ECE rw	ETPS rw		ETF rw				MSM rw	TS rw				SMS rw

Toggle fields

SMS

Bits 0-2: Slave mode selection.

Allowed values:
0: Disabled: Slave mode disabled - if CEN = ‘1 then the prescaler is clocked directly by the internal clock.
1: Encoder_Mode_1: Encoder mode 1 - Counter counts up/down on TI2FP1 edge depending on TI1FP2 level.
2: Encoder_Mode_2: Encoder mode 2 - Counter counts up/down on TI1FP2 edge depending on TI2FP1 level.
3: Encoder_Mode_3: Encoder mode 3 - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input.
4: Reset_Mode: Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter and generates an update of the registers.
5: Gated_Mode: Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled.
6: Trigger_Mode: Trigger Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled.
7: Ext_Clock_Mode: External Clock Mode 1 - Rising edges of the selected trigger (TRGI) clock the counter.

TS

Bits 4-6: Trigger selection.

Allowed values:
0: ITR0: Internal Trigger 0 (ITR0)
1: ITR1: Internal Trigger 1 (ITR1)
2: ITR2: Internal Trigger 2 (ITR2)
4: TI1F_ED: TI1 Edge Detector (TI1F_ED)
5: TI1FP1: Filtered Timer Input 1 (TI1FP1)
6: TI2FP2: Filtered Timer Input 2 (TI2FP2)
7: ETRF: External Trigger input (ETRF)

MSM

Bit 7: Master/Slave mode.

Allowed values:
0: NoSync: No action
1: Sync: The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between the current timer and its slaves (through TRGO). It is useful if we want to synchronize several timers on a single external event.

ETF

Bits 8-11: External trigger filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

ETPS

Bits 12-13: External trigger prescaler.

Allowed values:
0: Div1: Prescaler OFF
1: Div2: ETRP frequency divided by 2
2: Div4: ETRP frequency divided by 4
3: Div8: ETRP frequency divided by 8

ECE

Bit 14: External clock enable.

Allowed values:
0: Disabled: External clock mode 2 disabled
1: Enabled: External clock mode 2 enabled. The counter is clocked by any active edge on the ETRF signal.

ETP

Bit 15: External trigger polarity.

Allowed values:
0: NotInverted: ETR is noninverted, active at high level or rising edge
1: Inverted: ETR is inverted, active at low level or falling edge

DIER

DMA/Interrupt enable register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

12/13 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
	TDE rw	COMDE rw	CC[4]DE rw	CC[3]DE rw	CC[2]DE rw	CC[1]DE rw	UDE rw		TIE rw		CC[4]IE rw	CC[3]IE rw	CC[2]IE rw	CC[1]IE rw	UIE rw

Toggle fields

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CC[1]IE

Bit 1: Capture/Compare 1 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC[2]IE

Bit 2: Capture/Compare 2 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC[3]IE

Bit 3: Capture/Compare 3 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

CC[4]IE

Bit 4: Capture/Compare 4 interrupt enable.

Allowed values:
0: Disabled: CCx interrupt disabled
1: Enabled: CCx interrupt enabled

TIE

Bit 6: Trigger interrupt enable.

Allowed values:
0: Disabled: Trigger interrupt disabled
1: Enabled: Trigger interrupt enabled

UDE

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CC[1]DE

Bit 9: Capture/Compare 1 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC[2]DE

Bit 10: Capture/Compare 2 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC[3]DE

Bit 11: Capture/Compare 3 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

CC[4]DE

Bit 12: Capture/Compare 4 DMA request enable.

Allowed values:
0: Disabled: CCx DMA request disabled
1: Enabled: CCx DMA request enabled

COMDE

Bit 13: COM DMA request enable.

TDE

Bit 14: Trigger DMA request enable.

Allowed values:
0: Disabled: Trigger DMA request disabled
1: Enabled: Trigger DMA request enabled

SR

status register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

10/10 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			CC[4]OF rw	CC[3]OF rw	CC[2]OF rw	CC[1]OF rw			TIF rw		CC[4]IF rw	CC[3]IF rw	CC[2]IF rw	CC[1]IF rw	UIF rw

Toggle fields

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: NoUpdateOccurred: No update occurred
1: UpdatePending: Update interrupt pending

CC[1]IF

Bit 1: Capture/compare 1 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC[2]IF

Bit 2: Capture/compare 2 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC[3]IF

Bit 3: Capture/compare 3 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

CC[4]IF

Bit 4: Capture/compare 4 interrupt flag.

Allowed values:
1: Match: If CC1 is an output: The content of the counter TIMx_CNT matches the content of the TIMx_CCR1 register. If CC1 is an input: The counter value has been captured in TIMx_CCR1 register.

TIF

Bit 6: Trigger interrupt flag.

Allowed values:
0: NoTrigger: No trigger event occurred
1: Trigger: Trigger interrupt pending

CC[1]OF

Bit 9: Capture/Compare 1 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC[2]OF

Bit 10: Capture/Compare 2 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC[3]OF

Bit 11: Capture/Compare 3 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

CC[4]OF

Bit 12: Capture/Compare 4 overcapture flag.

Allowed values:
1: Overcapture: The counter value has been captured in TIMx_CCRx register while CCxIF flag was already set

EGR

event generation register

Offset: 0x14, size: 32, reset: 0x00000000, access: write-only

6/6 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									TG w		CC[4]G w	CC[3]G w	CC[2]G w	CC[1]G w	UG w

Toggle fields

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CC[1]G

Bit 1: Capture/compare 1 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC[2]G

Bit 2: Capture/compare 2 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC[3]G

Bit 3: Capture/compare 3 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

CC[4]G

Bit 4: Capture/compare 4 generation.

Allowed values:
1: Trigger: If CC1 is an output: CC1IF flag is set, Corresponding interrupt or DMA request is sent if enabled. If CC1 is an input: The current value of the counter is captured in TIMx_CCR1 register.

TG

Bit 6: Trigger generation.

Allowed values:
1: Trigger: The TIF flag is set in TIMx_SR register. Related interrupt or DMA transfer can occur if enabled.

CCMR1_Input

capture/compare mode register 1 (input mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

4/6 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IC[2]F rw				IC[2]PSC rw		CC[2]S rw		IC[1]F rw				IC[1]PSC rw		CC[1]S rw

Toggle fields

CC[1]S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
1: TI1: CC1 channel is configured as input, IC1 is mapped on TI1
2: TI2: CC1 channel is configured as input, IC1 is mapped on TI2
3: TRC: CC1 channel is configured as input, IC1 is mapped on TRC

IC[1]PSC

Bits 2-3: Input capture 1 prescaler.

IC[1]F

Bits 4-7: Input capture 1 filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

CC[2]S

Bits 8-9: Capture/Compare 2 selection.

Allowed values:
1: TI1: CC1 channel is configured as input, IC1 is mapped on TI1
2: TI2: CC1 channel is configured as input, IC1 is mapped on TI2
3: TRC: CC1 channel is configured as input, IC1 is mapped on TRC

IC[2]PSC

Bits 10-11: Input capture 2 prescaler.

IC[2]F

Bits 12-15: Input capture 2 filter.

Allowed values:
0: NoFilter: No filter, sampling is done at fDTS
1: FCK_INT_N2: fSAMPLING=fCK_INT, N=2
2: FCK_INT_N4: fSAMPLING=fCK_INT, N=4
3: FCK_INT_N8: fSAMPLING=fCK_INT, N=8
4: FDTS_Div2_N6: fSAMPLING=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMPLING=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMPLING=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMPLING=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMPLING=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMPLING=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMPLING=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMPLING=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMPLING=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMPLING=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMPLING=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMPLING=fDTS/32, N=8

CCMR1_Output

capture/compare mode register 1 (output mode)

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

8/12 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
							OC[2]M_3 rw								OC[1]M_3 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OC[2]CE rw	OC[2]M rw			OC[2]PE rw	OC[2]FE rw	CC[2]S rw		OC[1]CE rw	OC[1]M rw			OC[1]PE rw	OC[1]FE rw	CC[1]S rw

Toggle fields

CC[1]S

Bits 0-1: Capture/Compare 1 selection.

Allowed values:
0: Output: CC1 channel is configured as output

OC[1]FE

Bit 2: Output compare 1 fast enable.

OC[1]PE

Bit 3: Output compare 1 preload enable.

Allowed values:
0: Disabled: Preload register on CCR1 disabled. New values written to CCR1 are taken into account immediately
1: Enabled: Preload register on CCR1 enabled. Preload value is loaded into active register on each update event

OC[1]M

Bits 4-6: Output compare 1 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC[1]CE

Bit 7: Output compare 1 clear enable.

CC[2]S

Bits 8-9: Capture/Compare 2 selection.

Allowed values:
0: Output: CC1 channel is configured as output

OC[2]FE

Bit 10: Output compare 2 fast enable.

OC[2]PE

Bit 11: Output compare 2 preload enable.

Allowed values:
0: Disabled: Preload register on CCR1 disabled. New values written to CCR1 are taken into account immediately
1: Enabled: Preload register on CCR1 enabled. Preload value is loaded into active register on each update event

OC[2]M

Bits 12-14: Output compare 2 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC[2]CE

Bit 15: Output compare 2 clear enable.

OC[1]M_3

Bit 16: Output compare 1 mode, bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

OC[2]M_3

Bit 24: Output compare 2 mode, bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

CCMR2_Input

capture/compare mode register 2 (input mode)

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

6/6 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
IC[4]F rw				IC[4]PSC rw		CC[4]S rw		IC[3]F rw				IC[3]PSC rw		CC[3]S rw

Toggle fields

CC[3]S

Bits 0-1: Capture/Compare 3 selection.

Allowed values:
1: TI3: CC3 channel is configured as input, IC3 is mapped on TI3
2: TI4: CC3 channel is configured as input, IC3 is mapped on TI4
3: TRC: CC3 channel is configured as input, IC3 is mapped on TRC

IC[3]PSC

Bits 2-3: Input capture 3 prescaler.

Allowed values: 0x0-0x3

IC[3]F

Bits 4-7: Input capture 3 filter.

Allowed values: 0x0-0xf

CC[4]S

Bits 8-9: Capture/Compare 4 selection.

Allowed values:
1: TI3: CC3 channel is configured as input, IC3 is mapped on TI3
2: TI4: CC3 channel is configured as input, IC3 is mapped on TI4
3: TRC: CC3 channel is configured as input, IC3 is mapped on TRC

IC[4]PSC

Bits 10-11: Input capture 4 prescaler.

Allowed values: 0x0-0x3

IC[4]F

Bits 12-15: Input capture 4 filter.

Allowed values: 0x0-0xf

CCMR2_Output

capture/compare mode register 2 (output mode)

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

8/12 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
							OC[4]M_3 rw								OC[3]M_3 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OC[4]CE rw	OC[4]M rw			OC[4]PE rw	OC[4]FE rw	CC[4]S rw		OC[3]CE rw	OC[3]M rw			OC[3]PE rw	OC[3]FE rw	CC[3]S rw

Toggle fields

CC[3]S

Bits 0-1: Capture/Compare 3 selection.

Allowed values:
0: Output: CC3 channel is configured as output

OC[3]FE

Bit 2: Output compare 3 fast enable.

OC[3]PE

Bit 3: Output compare 3 preload enable.

Allowed values:
0: Disabled: Preload register on CCR3 disabled. New values written to CCR3 are taken into account immediately
1: Enabled: Preload register on CCR3 enabled. Preload value is loaded into active register on each update event

OC[3]M

Bits 4-6: Output compare 3 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC[3]CE

Bit 7: Output compare 3 clear enable.

CC[4]S

Bits 8-9: Capture/Compare 4 selection.

Allowed values:
0: Output: CC3 channel is configured as output

OC[4]FE

Bit 10: Output compare 4 fast enable.

OC[4]PE

Bit 11: Output compare 4 preload enable.

Allowed values:
0: Disabled: Preload register on CCR3 disabled. New values written to CCR3 are taken into account immediately
1: Enabled: Preload register on CCR3 enabled. Preload value is loaded into active register on each update event

OC[4]M

Bits 12-14: Output compare 4 mode.

Allowed values:
0: Frozen: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive
1: ActiveOnMatch: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1
2: InactiveOnMatch: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved
3: Toggle: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved
4: ForceInactive: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF
5: ForceActive: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF
6: PwmMode1: In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down
7: PwmMode2: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1

OC[4]CE

Bit 15: Output compare 4 clear enable.

OC[3]M_3

Bit 16: Output compare 3 mode, bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

OC[4]M_3

Bit 24: Output compare 4 mode, bit 3.

Allowed values:
0: Normal: Normal output compare mode (modes 0-7)
1: Extended: Extended output compare mode (modes 7-15)

CCER

capture/compare enable register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

0/12 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CC[4]NP rw		CC[4]P rw	CC[4]E rw	CC[3]NP rw		CC[3]P rw	CC[3]E rw	CC[2]NP rw		CC[2]P rw	CC[2]E rw	CC[1]NP rw		CC[1]P rw	CC[1]E rw

Toggle fields

CC[1]E

Bit 0: Capture/Compare 1 output enable.

CC[1]P

Bit 1: Capture/Compare 1 output Polarity.

CC[1]NP

Bit 3: Capture/Compare 1 output Polarity.

CC[2]E

Bit 4: Capture/Compare 2 output enable.

CC[2]P

Bit 5: Capture/Compare 2 output Polarity.

CC[2]NP

Bit 7: Capture/Compare 2 output Polarity.

CC[3]E

Bit 8: Capture/Compare 3 output enable.

CC[3]P

Bit 9: Capture/Compare 3 output Polarity.

CC[3]NP

Bit 11: Capture/Compare 3 output Polarity.

CC[4]E

Bit 12: Capture/Compare 4 output enable.

CC[4]P

Bit 13: Capture/Compare 4 output Polarity.

CC[4]NP

Bit 15: Capture/Compare 4 output Polarity.

CNT

counter

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
CNT rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CNT rw

Toggle fields

CNT

Bits 0-31: Counter value.

Allowed values: 0x0-0xffffffff

PSC

prescaler

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PSC rw

Toggle fields

PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
ARR rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ARR rw

Toggle fields

ARR

Bits 0-31: Auto-reload value.

Allowed values: 0x0-0xffffffff

CCR[1]

capture/compare register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
CCR rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CCR rw

Toggle fields

CCR

Bits 0-31: Capture/Compare value.

Allowed values: 0x0-0xffffffff

CCR[2]

capture/compare register

Offset: 0x38, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
CCR rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CCR rw

Toggle fields

CCR

Bits 0-31: Capture/Compare value.

Allowed values: 0x0-0xffffffff

CCR[3]

capture/compare register

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
CCR rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CCR rw

Toggle fields

CCR

Bits 0-31: Capture/Compare value.

Allowed values: 0x0-0xffffffff

CCR[4]

capture/compare register

Offset: 0x40, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
CCR rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CCR rw

Toggle fields

CCR

Bits 0-31: Capture/Compare value.

Allowed values: 0x0-0xffffffff

DCR

DMA control register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			DBL rw								DBA rw

Toggle fields

DBA

Bits 0-4: DMA base address.

Allowed values: 0x0-0x1f

DBL

Bits 8-12: DMA burst length.

Allowed values: 0x0-0x12

DMAR

DMA address for full transfer

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DMAB rw

Toggle fields

DMAB

Bits 0-15: DMA register for burst accesses.

OR

TIM2 option register

Offset: 0x50, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
											TI4_RMP rw		ETR_RMP rw

Toggle fields

ETR_RMP

Bits 0-2: Timer2 ETR remap.

TI4_RMP

Bits 3-4: Internal trigger.

TIM6

0x40001000: Basic-timers

13/13 fields covered.

Toggle register map

Offset	Name	15	8	7	6	3	2	1	0
0x0	CR1			ARPE		OPM	URS	UDIS	CEN
0x4	CR2				MMS
0xc	DIER		UDE						UIE
0x10	SR								UIF
0x14	EGR								UG
0x24	CNT	CNT
0x28	PSC	PSC
0x2c	ARR	ARR

Toggle registers

CR1

control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								ARPE rw				OPM rw	URS rw	UDIS rw	CEN rw

Toggle fields

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CR2

control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									MMS rw

Toggle fields

MMS

Bits 4-6: Master mode selection.

Allowed values:
0: Reset: Use UG bit from TIMx_EGR register
1: Enable: Use CNT bit from TIMx_CEN register
2: Update: Use the update event

DIER

DMA/Interrupt enable register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							UDE rw								UIE rw

Toggle fields

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

UDE

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

SR

status register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
															UIF rw

Toggle fields

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: NoUpdateOccurred: No update occurred
1: UpdatePending: Update interrupt pending

EGR

event generation register

Offset: 0x14, size: 32, reset: 0x00000000, access: write-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
															UG w

Toggle fields

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CNT

counter

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CNT rw

Toggle fields

CNT

Bits 0-15: Low counter value.

Allowed values: 0x0-0xffff

PSC

prescaler

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PSC rw

Toggle fields

PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ARR rw

Toggle fields

ARR

Bits 0-15: Low Auto-reload value.

Allowed values: 0x0-0xffff

TIM7

0x40001400: Basic-timers

13/13 fields covered.

Toggle register map

Offset	Name	15	8	7	6	3	2	1	0
0x0	CR1			ARPE		OPM	URS	UDIS	CEN
0x4	CR2				MMS
0xc	DIER		UDE						UIE
0x10	SR								UIF
0x14	EGR								UG
0x24	CNT	CNT
0x28	PSC	PSC
0x2c	ARR	ARR

Toggle registers

CR1

control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

5/5 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								ARPE rw				OPM rw	URS rw	UDIS rw	CEN rw

Toggle fields

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

URS

Bit 2: Update request source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

OPM

Bit 3: One-pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

ARPE

Bit 7: Auto-reload preload enable.

Allowed values:
0: Disabled: TIMx_APRR register is not buffered
1: Enabled: TIMx_APRR register is buffered

CR2

control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
									MMS rw

Toggle fields

MMS

Bits 4-6: Master mode selection.

Allowed values:
0: Reset: Use UG bit from TIMx_EGR register
1: Enable: Use CNT bit from TIMx_CEN register
2: Update: Use the update event

DIER

DMA/Interrupt enable register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							UDE rw								UIE rw

Toggle fields

UIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

UDE

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

SR

status register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
															UIF rw

Toggle fields

UIF

Bit 0: Update interrupt flag.

Allowed values:
0: NoUpdateOccurred: No update occurred
1: UpdatePending: Update interrupt pending

EGR

event generation register

Offset: 0x14, size: 32, reset: 0x00000000, access: write-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
															UG w

Toggle fields

UG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CNT

counter

Offset: 0x24, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CNT rw

Toggle fields

CNT

Bits 0-15: Low counter value.

Allowed values: 0x0-0xffff

PSC

prescaler

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
PSC rw

Toggle fields

PSC

Bits 0-15: Prescaler value.

Allowed values: 0x0-0xffff

ARR

auto-reload register

Offset: 0x2c, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ARR rw

Toggle fields

ARR

Bits 0-15: Low Auto-reload value.

Allowed values: 0x0-0xffff

TSC

0x40024000: Touch sensing controller

16/170 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	CR	CTPH				CTPL				SSD							SSE	SSPSC	PGPSC							MCV			IODEF	SYNCPOL	AM	START	TSCE
0x4	IER																															MCEIE	EOAIE
0x8	ICR																															MCEIC	EOAIC
0xc	ISR																															MCEF	EOAF
0x10	IOHCR	G8_IO4	G8_IO3	G8_IO2	G8_IO1	G7_IO4	G7_IO3	G7_IO2	G7_IO1	G6_IO4	G6_IO3	G6_IO2	G6_IO1	G5_IO4	G5_IO3	G5_IO2	G5_IO1	G4_IO4	G4_IO3	G4_IO2	G4_IO1	G3_IO4	G3_IO3	G3_IO2	G3_IO1	G2_IO4	G2_IO3	G2_IO2	G2_IO1	G1_IO4	G1_IO3	G1_IO2	G1_IO1
0x18	IOASCR	G8_IO4	G8_IO3	G8_IO2	G8_IO1	G7_IO4	G7_IO3	G7_IO2	G7_IO1	G6_IO4	G6_IO3	G6_IO2	G6_IO1	G5_IO4	G5_IO3	G5_IO2	G5_IO1	G4_IO4	G4_IO3	G4_IO2	G4_IO1	G3_IO4	G3_IO3	G3_IO2	G3_IO1	G2_IO4	G2_IO3	G2_IO2	G2_IO1	G1_IO4	G1_IO3	G1_IO2	G1_IO1
0x20	IOSCR	G8_IO4	G8_IO3	G8_IO2	G8_IO1	G7_IO4	G7_IO3	G7_IO2	G7_IO1	G6_IO4	G6_IO3	G6_IO2	G6_IO1	G5_IO4	G5_IO3	G5_IO2	G5_IO1	G4_IO4	G4_IO3	G4_IO2	G4_IO1	G3_IO4	G3_IO3	G3_IO2	G3_IO1	G2_IO4	G2_IO3	G2_IO2	G2_IO1	G1_IO4	G1_IO3	G1_IO2	G1_IO1
0x28	IOCCR	G8_IO4	G8_IO3	G8_IO2	G8_IO1	G7_IO4	G7_IO3	G7_IO2	G7_IO1	G6_IO4	G6_IO3	G6_IO2	G6_IO1	G5_IO4	G5_IO3	G5_IO2	G5_IO1	G4_IO4	G4_IO3	G4_IO2	G4_IO1	G3_IO4	G3_IO3	G3_IO2	G3_IO1	G2_IO4	G2_IO3	G2_IO2	G2_IO1	G1_IO4	G1_IO3	G1_IO2	G1_IO1
0x30	IOGCSR									G8S	G7S	G6S	G5S	G4S	G3S	G2S	G1S									G8E	G7E	G6E	G5E	G4E	G3E	G2E	G1E
0x34	IOG[1]CR																			CNT
0x38	IOG[2]CR																			CNT
0x3c	IOG[3]CR																			CNT
0x40	IOG[4]CR																			CNT
0x44	IOG[5]CR																			CNT
0x48	IOG[6]CR																			CNT
0x4c	IOG[7]CR																			CNT
0x50	IOG[8]CR																			CNT

Toggle registers

CR

control register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/12 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
CTPH rw				CTPL rw				SSD rw							SSE rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SSPSC rw	PGPSC rw							MCV rw			IODEF rw	SYNCPOL rw	AM rw	START rw	TSCE rw

Toggle fields

TSCE

Bit 0: Touch sensing controller enable.

START

Bit 1: Start a new acquisition.

AM

Bit 2: Acquisition mode.

SYNCPOL

Bit 3: Synchronization pin polarity.

IODEF

Bit 4: I/O Default mode.

MCV

Bits 5-7: Max count value.

PGPSC

Bits 12-14: pulse generator prescaler.

SSPSC

Bit 15: Spread spectrum prescaler.

SSE

Bit 16: Spread spectrum enable.

SSD

Bits 17-23: Spread spectrum deviation.

CTPL

Bits 24-27: Charge transfer pulse low.

CTPH

Bits 28-31: Charge transfer pulse high.

IER

interrupt enable register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
														MCEIE rw	EOAIE rw

Toggle fields

EOAIE

Bit 0: End of acquisition interrupt enable.

MCEIE

Bit 1: Max count error interrupt enable.

ICR

interrupt clear register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
														MCEIC rw	EOAIC rw

Toggle fields

EOAIC

Bit 0: End of acquisition interrupt clear.

MCEIC

Bit 1: Max count error interrupt clear.

ISR

interrupt status register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
														MCEF rw	EOAF rw

Toggle fields

EOAF

Bit 0: End of acquisition flag.

MCEF

Bit 1: Max count error flag.

IOHCR

I/O hysteresis control register

Offset: 0x10, size: 32, reset: 0xFFFFFFFF, access: read-write

0/32 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
G8_IO4 rw	G8_IO3 rw	G8_IO2 rw	G8_IO1 rw	G7_IO4 rw	G7_IO3 rw	G7_IO2 rw	G7_IO1 rw	G6_IO4 rw	G6_IO3 rw	G6_IO2 rw	G6_IO1 rw	G5_IO4 rw	G5_IO3 rw	G5_IO2 rw	G5_IO1 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
G4_IO4 rw	G4_IO3 rw	G4_IO2 rw	G4_IO1 rw	G3_IO4 rw	G3_IO3 rw	G3_IO2 rw	G3_IO1 rw	G2_IO4 rw	G2_IO3 rw	G2_IO2 rw	G2_IO1 rw	G1_IO4 rw	G1_IO3 rw	G1_IO2 rw	G1_IO1 rw

Toggle fields

G1_IO1

Bit 0: G1_IO1.

G1_IO2

Bit 1: G1_IO2.

G1_IO3

Bit 2: G1_IO3.

G1_IO4

Bit 3: G1_IO4.

G2_IO1

Bit 4: G2_IO1.

G2_IO2

Bit 5: G2_IO2.

G2_IO3

Bit 6: G2_IO3.

G2_IO4

Bit 7: G2_IO4.

G3_IO1

Bit 8: G3_IO1.

G3_IO2

Bit 9: G3_IO2.

G3_IO3

Bit 10: G3_IO3.

G3_IO4

Bit 11: G3_IO4.

G4_IO1

Bit 12: G4_IO1.

G4_IO2

Bit 13: G4_IO2.

G4_IO3

Bit 14: G4_IO3.

G4_IO4

Bit 15: G4_IO4.

G5_IO1

Bit 16: G5_IO1.

G5_IO2

Bit 17: G5_IO2.

G5_IO3

Bit 18: G5_IO3.

G5_IO4

Bit 19: G5_IO4.

G6_IO1

Bit 20: G6_IO1.

G6_IO2

Bit 21: G6_IO2.

G6_IO3

Bit 22: G6_IO3.

G6_IO4

Bit 23: G6_IO4.

G7_IO1

Bit 24: G7_IO1.

G7_IO2

Bit 25: G7_IO2.

G7_IO3

Bit 26: G7_IO3.

G7_IO4

Bit 27: G7_IO4.

G8_IO1

Bit 28: G8_IO1.

G8_IO2

Bit 29: G8_IO2.

G8_IO3

Bit 30: G8_IO3.

G8_IO4

Bit 31: G8_IO4.

IOASCR

I/O analog switch control register

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

0/32 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
G8_IO4 rw	G8_IO3 rw	G8_IO2 rw	G8_IO1 rw	G7_IO4 rw	G7_IO3 rw	G7_IO2 rw	G7_IO1 rw	G6_IO4 rw	G6_IO3 rw	G6_IO2 rw	G6_IO1 rw	G5_IO4 rw	G5_IO3 rw	G5_IO2 rw	G5_IO1 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
G4_IO4 rw	G4_IO3 rw	G4_IO2 rw	G4_IO1 rw	G3_IO4 rw	G3_IO3 rw	G3_IO2 rw	G3_IO1 rw	G2_IO4 rw	G2_IO3 rw	G2_IO2 rw	G2_IO1 rw	G1_IO4 rw	G1_IO3 rw	G1_IO2 rw	G1_IO1 rw

Toggle fields

G1_IO1

Bit 0: G1_IO1.

G1_IO2

Bit 1: G1_IO2.

G1_IO3

Bit 2: G1_IO3.

G1_IO4

Bit 3: G1_IO4.

G2_IO1

Bit 4: G2_IO1.

G2_IO2

Bit 5: G2_IO2.

G2_IO3

Bit 6: G2_IO3.

G2_IO4

Bit 7: G2_IO4.

G3_IO1

Bit 8: G3_IO1.

G3_IO2

Bit 9: G3_IO2.

G3_IO3

Bit 10: G3_IO3.

G3_IO4

Bit 11: G3_IO4.

G4_IO1

Bit 12: G4_IO1.

G4_IO2

Bit 13: G4_IO2.

G4_IO3

Bit 14: G4_IO3.

G4_IO4

Bit 15: G4_IO4.

G5_IO1

Bit 16: G5_IO1.

G5_IO2

Bit 17: G5_IO2.

G5_IO3

Bit 18: G5_IO3.

G5_IO4

Bit 19: G5_IO4.

G6_IO1

Bit 20: G6_IO1.

G6_IO2

Bit 21: G6_IO2.

G6_IO3

Bit 22: G6_IO3.

G6_IO4

Bit 23: G6_IO4.

G7_IO1

Bit 24: G7_IO1.

G7_IO2

Bit 25: G7_IO2.

G7_IO3

Bit 26: G7_IO3.

G7_IO4

Bit 27: G7_IO4.

G8_IO1

Bit 28: G8_IO1.

G8_IO2

Bit 29: G8_IO2.

G8_IO3

Bit 30: G8_IO3.

G8_IO4

Bit 31: G8_IO4.

IOSCR

I/O sampling control register

Offset: 0x20, size: 32, reset: 0x00000000, access: read-write

0/32 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
G8_IO4 rw	G8_IO3 rw	G8_IO2 rw	G8_IO1 rw	G7_IO4 rw	G7_IO3 rw	G7_IO2 rw	G7_IO1 rw	G6_IO4 rw	G6_IO3 rw	G6_IO2 rw	G6_IO1 rw	G5_IO4 rw	G5_IO3 rw	G5_IO2 rw	G5_IO1 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
G4_IO4 rw	G4_IO3 rw	G4_IO2 rw	G4_IO1 rw	G3_IO4 rw	G3_IO3 rw	G3_IO2 rw	G3_IO1 rw	G2_IO4 rw	G2_IO3 rw	G2_IO2 rw	G2_IO1 rw	G1_IO4 rw	G1_IO3 rw	G1_IO2 rw	G1_IO1 rw

Toggle fields

G1_IO1

Bit 0: G1_IO1.

G1_IO2

Bit 1: G1_IO2.

G1_IO3

Bit 2: G1_IO3.

G1_IO4

Bit 3: G1_IO4.

G2_IO1

Bit 4: G2_IO1.

G2_IO2

Bit 5: G2_IO2.

G2_IO3

Bit 6: G2_IO3.

G2_IO4

Bit 7: G2_IO4.

G3_IO1

Bit 8: G3_IO1.

G3_IO2

Bit 9: G3_IO2.

G3_IO3

Bit 10: G3_IO3.

G3_IO4

Bit 11: G3_IO4.

G4_IO1

Bit 12: G4_IO1.

G4_IO2

Bit 13: G4_IO2.

G4_IO3

Bit 14: G4_IO3.

G4_IO4

Bit 15: G4_IO4.

G5_IO1

Bit 16: G5_IO1.

G5_IO2

Bit 17: G5_IO2.

G5_IO3

Bit 18: G5_IO3.

G5_IO4

Bit 19: G5_IO4.

G6_IO1

Bit 20: G6_IO1.

G6_IO2

Bit 21: G6_IO2.

G6_IO3

Bit 22: G6_IO3.

G6_IO4

Bit 23: G6_IO4.

G7_IO1

Bit 24: G7_IO1.

G7_IO2

Bit 25: G7_IO2.

G7_IO3

Bit 26: G7_IO3.

G7_IO4

Bit 27: G7_IO4.

G8_IO1

Bit 28: G8_IO1.

G8_IO2

Bit 29: G8_IO2.

G8_IO3

Bit 30: G8_IO3.

G8_IO4

Bit 31: G8_IO4.

IOCCR

I/O channel control register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

0/32 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
G8_IO4 rw	G8_IO3 rw	G8_IO2 rw	G8_IO1 rw	G7_IO4 rw	G7_IO3 rw	G7_IO2 rw	G7_IO1 rw	G6_IO4 rw	G6_IO3 rw	G6_IO2 rw	G6_IO1 rw	G5_IO4 rw	G5_IO3 rw	G5_IO2 rw	G5_IO1 rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
G4_IO4 rw	G4_IO3 rw	G4_IO2 rw	G4_IO1 rw	G3_IO4 rw	G3_IO3 rw	G3_IO2 rw	G3_IO1 rw	G2_IO4 rw	G2_IO3 rw	G2_IO2 rw	G2_IO1 rw	G1_IO4 rw	G1_IO3 rw	G1_IO2 rw	G1_IO1 rw

Toggle fields

G1_IO1

Bit 0: G1_IO1.

G1_IO2

Bit 1: G1_IO2.

G1_IO3

Bit 2: G1_IO3.

G1_IO4

Bit 3: G1_IO4.

G2_IO1

Bit 4: G2_IO1.

G2_IO2

Bit 5: G2_IO2.

G2_IO3

Bit 6: G2_IO3.

G2_IO4

Bit 7: G2_IO4.

G3_IO1

Bit 8: G3_IO1.

G3_IO2

Bit 9: G3_IO2.

G3_IO3

Bit 10: G3_IO3.

G3_IO4

Bit 11: G3_IO4.

G4_IO1

Bit 12: G4_IO1.

G4_IO2

Bit 13: G4_IO2.

G4_IO3

Bit 14: G4_IO3.

G4_IO4

Bit 15: G4_IO4.

G5_IO1

Bit 16: G5_IO1.

G5_IO2

Bit 17: G5_IO2.

G5_IO3

Bit 18: G5_IO3.

G5_IO4

Bit 19: G5_IO4.

G6_IO1

Bit 20: G6_IO1.

G6_IO2

Bit 21: G6_IO2.

G6_IO3

Bit 22: G6_IO3.

G6_IO4

Bit 23: G6_IO4.

G7_IO1

Bit 24: G7_IO1.

G7_IO2

Bit 25: G7_IO2.

G7_IO3

Bit 26: G7_IO3.

G7_IO4

Bit 27: G7_IO4.

G8_IO1

Bit 28: G8_IO1.

G8_IO2

Bit 29: G8_IO2.

G8_IO3

Bit 30: G8_IO3.

G8_IO4

Bit 31: G8_IO4.

IOGCSR

I/O group control status register

Offset: 0x30, size: 32, reset: 0x00000000, access: Unspecified

8/16 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
								G8S r	G7S r	G6S r	G5S r	G4S r	G3S r	G2S r	G1S r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								G8E rw	G7E rw	G6E rw	G5E rw	G4E rw	G3E rw	G2E rw	G1E rw

Toggle fields

G1E

Bit 0: Analog I/O group x enable.

G2E

Bit 1: Analog I/O group x enable.

G3E

Bit 2: Analog I/O group x enable.

G4E

Bit 3: Analog I/O group x enable.

G5E

Bit 4: Analog I/O group x enable.

G6E

Bit 5: Analog I/O group x enable.

G7E

Bit 6: Analog I/O group x enable.

G8E

Bit 7: Analog I/O group x enable.

G1S

Bit 16: Analog I/O group x status.

G2S

Bit 17: Analog I/O group x status.

G3S

Bit 18: Analog I/O group x status.

G4S

Bit 19: Analog I/O group x status.

G5S

Bit 20: Analog I/O group x status.

G6S

Bit 21: Analog I/O group x status.

G7S

Bit 22: Analog I/O group x status.

G8S

Bit 23: Analog I/O group x status.

IOG[1]CR

I/O group x counter register

Offset: 0x34, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		CNT r

Toggle fields

CNT

Bits 0-13: Counter value.

IOG[2]CR

I/O group x counter register

Offset: 0x38, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		CNT r

Toggle fields

CNT

Bits 0-13: Counter value.

IOG[3]CR

I/O group x counter register

Offset: 0x3c, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		CNT r

Toggle fields

CNT

Bits 0-13: Counter value.

IOG[4]CR

I/O group x counter register

Offset: 0x40, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		CNT r

Toggle fields

CNT

Bits 0-13: Counter value.

IOG[5]CR

I/O group x counter register

Offset: 0x44, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		CNT r

Toggle fields

CNT

Bits 0-13: Counter value.

IOG[6]CR

I/O group x counter register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		CNT r

Toggle fields

CNT

Bits 0-13: Counter value.

IOG[7]CR

I/O group x counter register

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		CNT r

Toggle fields

CNT

Bits 0-13: Counter value.

IOG[8]CR

I/O group x counter register

Offset: 0x50, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
		CNT r

Toggle fields

CNT

Bits 0-13: Counter value.

USART1

0x40013800: Universal synchronous asynchronous receiver transmitter

104/104 fields covered.

Toggle register map

Offset	Name	31	28	27	26	25	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	CR1		M1	EOBIE	RTOIE	DEAT				DEDT					OVER8	CMIE	MME	M0	WAKE	PCE	PS	PEIE	TXEIE	TCIE	RXNEIE	IDLEIE	TE	RE	UESM	UE
0x4	CR2	ADD					RTOEN	ABRMOD		ABREN	MSBFIRST	DATAINV	TXINV	RXINV	SWAP	LINEN	STOP		CLKEN	CPOL	CPHA	LBCL		LBDIE	LBDL	ADDM7
0x8	CR3							WUFIE	WUS		SCARCNT				DEP	DEM	DDRE	OVRDIS	ONEBIT	CTSIE	CTSE	RTSE	DMAT	DMAR	SCEN	NACK	HDSEL	IRLP	IREN	EIE
0xc	BRR														BRR
0x10	GTPR														GT								PSC
0x14	RTOR	BLEN					RTO								RTO
0x18	RQR																									TXFRQ	RXFRQ	MMRQ	SBKRQ	ABRRQ
0x1c	ISR							REACK	TEACK	WUF	RWU	SBKF	CMF	BUSY	ABRF	ABRE		EOBF	RTOF	CTS	CTSIF	LBDF	TXE	TC	RXNE	IDLE	ORE	NF	FE	PE
0x20	ICR									WUCF			CMCF					EOBCF	RTOCF		CTSCF	LBDCF		TCCF		IDLECF	ORECF	NCF	FECF	PECF
0x24	RDR																					RDR
0x28	TDR																					TDR

Toggle registers

CR1

Control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

21/21 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
			M1 rw	EOBIE rw	RTOIE rw	DEAT rw					DEDT rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OVER8 rw	CMIE rw	MME rw	M0 rw	WAKE rw	PCE rw	PS rw	PEIE rw	TXEIE rw	TCIE rw	RXNEIE rw	IDLEIE rw	TE rw	RE rw	UESM rw	UE rw

Toggle fields

UE

Bit 0: USART enable.

Allowed values:
0: Disabled: UART is disabled
1: Enabled: UART is enabled

UESM

Bit 1: USART enable in Stop mode.

Allowed values:
0: Disabled: USART not able to wake up the MCU from Stop mode
1: Enabled: USART able to wake up the MCU from Stop mode

RE

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver is disabled
1: Enabled: Receiver is enabled

TE

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter is disabled
1: Enabled: Transmitter is enabled

IDLEIE

Bit 4: IDLE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever IDLE=1 in the ISR register

RXNEIE

Bit 5: RXNE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever ORE=1 or RXNE=1 in the ISR register

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TC=1 in the ISR register

TXEIE

Bit 7: interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TXE=1 in the ISR register

PEIE

Bit 8: PE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever PE=1 in the ISR register

PS

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCE

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WAKE

Bit 11: Receiver wakeup method.

Allowed values:
0: Idle: Idle line
1: Address: Address mask

M0

Bit 12: Word length.

Allowed values:
0: Bit8: 1 start bit, 8 data bits, n stop bits
1: Bit9: 1 start bit, 9 data bits, n stop bits

MME

Bit 13: Mute mode enable.

Allowed values:
0: Disabled: Receiver in active mode permanently
1: Enabled: Receiver can switch between mute mode and active mode

CMIE

Bit 14: Character match interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated when the CMF bit is set in the ISR register

OVER8

Bit 15: Oversampling mode.

Allowed values:
0: Oversampling16: Oversampling by 16
1: Oversampling8: Oversampling by 8

DEDT

Bits 16-20: Driver Enable de-assertion time.

Allowed values: 0x0-0x1f

DEAT

Bits 21-25: Driver Enable assertion time.

Allowed values: 0x0-0x1f

RTOIE

Bit 26: Receiver timeout interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated when the RTOF bit is set in the ISR register

EOBIE

Bit 27: End of Block interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: A USART interrupt is generated when the EOBF flag is set in the ISR register

M1

Bit 28: Word length.

Allowed values:
0: M0: Use M0 to set the data bits
1: Bit7: 1 start bit, 7 data bits, n stop bits

CR2

Control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

18/18 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
ADD rw								RTOEN rw	ABRMOD rw		ABREN rw	MSBFIRST rw	DATAINV rw	TXINV rw	RXINV rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SWAP rw	LINEN rw	STOP rw		CLKEN rw	CPOL rw	CPHA rw	LBCL rw		LBDIE rw	LBDL rw	ADDM7 rw

Toggle fields

ADDM7

Bit 4: 7-bit Address Detection/4-bit Address Detection.

Allowed values:
0: Bit4: 4-bit address detection
1: Bit7: 7-bit address detection

LBDL

Bit 5: LIN break detection length.

Allowed values:
0: Bit10: 10-bit break detection
1: Bit11: 11-bit break detection

LBDIE

Bit 6: LIN break detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever LBDF=1 in the ISR register

LBCL

Bit 8: Last bit clock pulse.

Allowed values:
0: NotOutput: The clock pulse of the last data bit is not output to the CK pin
1: Output: The clock pulse of the last data bit is output to the CK pin

CPHA

Bit 9: Clock phase.

Allowed values:
0: First: The first clock transition is the first data capture edge
1: Second: The second clock transition is the first data capture edge

CPOL

Bit 10: Clock polarity.

Allowed values:
0: Low: Steady low value on CK pin outside transmission window
1: High: Steady high value on CK pin outside transmission window

CLKEN

Bit 11: Clock enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STOP

Bits 12-13: STOP bits.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bit
2: Stop2: 2 stop bit
3: Stop1p5: 1.5 stop bit

LINEN

Bit 14: LIN mode enable.

Allowed values:
0: Disabled: LIN mode disabled
1: Enabled: LIN mode enabled

SWAP

Bit 15: Swap TX/RX pins.

Allowed values:
0: Standard: TX/RX pins are used as defined in standard pinout
1: Swapped: The TX and RX pins functions are swapped

RXINV

Bit 16: RX pin active level inversion.

Allowed values:
0: Standard: RX pin signal works using the standard logic levels
1: Inverted: RX pin signal values are inverted

TXINV

Bit 17: TX pin active level inversion.

Allowed values:
0: Standard: TX pin signal works using the standard logic levels
1: Inverted: TX pin signal values are inverted

DATAINV

Bit 18: Binary data inversion.

Allowed values:
0: Positive: Logical data from the data register are send/received in positive/direct logic
1: Negative: Logical data from the data register are send/received in negative/inverse logic

MSBFIRST

Bit 19: Most significant bit first.

Allowed values:
0: LSB: data is transmitted/received with data bit 0 first, following the start bit
1: MSB: data is transmitted/received with MSB (bit 7/8/9) first, following the start bit

ABREN

Bit 20: Auto baud rate enable.

Allowed values:
0: Disabled: Auto baud rate detection is disabled
1: Enabled: Auto baud rate detection is enabled

ABRMOD

Bits 21-22: Auto baud rate mode.

Allowed values:
0: Start: Measurement of the start bit is used to detect the baud rate
1: Edge: Falling edge to falling edge measurement
2: Frame7F: 0x7F frame detection
3: Frame55: 0x55 frame detection

RTOEN

Bit 23: Receiver timeout enable.

Allowed values:
0: Disabled: Receiver timeout feature disabled
1: Enabled: Receiver timeout feature enabled

ADD

Bits 24-31: Address of the USART node.

Allowed values: 0x0-0xff

CR3

Control register 3

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

19/19 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
									WUFIE rw	WUS rw		SCARCNT rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DEP rw	DEM rw	DDRE rw	OVRDIS rw	ONEBIT rw	CTSIE rw	CTSE rw	RTSE rw	DMAT rw	DMAR rw	SCEN rw	NACK rw	HDSEL rw	IRLP rw	IREN rw	EIE rw

Toggle fields

EIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the ISR register

IREN

Bit 1: Ir mode enable.

Allowed values:
0: Disabled: IrDA disabled
1: Enabled: IrDA enabled

IRLP

Bit 2: Ir low-power.

Allowed values:
0: Normal: Normal mode
1: LowPower: Low-power mode

HDSEL

Bit 3: Half-duplex selection.

Allowed values:
0: NotSelected: Half duplex mode is not selected
1: Selected: Half duplex mode is selected

NACK

Bit 4: Smartcard NACK enable.

Allowed values:
0: Disabled: NACK transmission in case of parity error is disabled
1: Enabled: NACK transmission during parity error is enabled

SCEN

Bit 5: Smartcard mode enable.

Allowed values:
0: Disabled: Smartcard Mode disabled
1: Enabled: Smartcard Mode enabled

DMAR

Bit 6: DMA enable receiver.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DMAT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSE

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS output enabled, data is only requested when there is space in the receive buffer

CTSE

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS mode enabled, data is only transmitted when the CTS input is asserted

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever CTSIF=1 in the ISR register

ONEBIT

Bit 11: One sample bit method enable.

Allowed values:
0: Sample3: Three sample bit method
1: Sample1: One sample bit method

OVRDIS

Bit 12: Overrun Disable.

Allowed values:
0: Enabled: Overrun Error Flag, ORE, is set when received data is not read before receiving new data
1: Disabled: Overrun functionality is disabled. If new data is received while the RXNE flag is still set the ORE flag is not set and the new received data overwrites the previous content of the RDR register

DDRE

Bit 13: DMA Disable on Reception Error.

Allowed values:
0: NotDisabled: DMA is not disabled in case of reception error
1: Disabled: DMA is disabled following a reception error

DEM

Bit 14: Driver enable mode.

Allowed values:
0: Disabled: DE function is disabled
1: Enabled: The DE signal is output on the RTS pin

DEP

Bit 15: Driver enable polarity selection.

Allowed values:
0: High: DE signal is active high
1: Low: DE signal is active low

SCARCNT

Bits 17-19: Smartcard auto-retry count.

Allowed values: 0x0-0x7

WUS

Bits 20-21: Wakeup from Stop mode interrupt flag selection.

Allowed values:
0: Address: WUF active on address match
2: Start: WuF active on Start bit detection
3: RXNE: WUF active on RXNE

WUFIE

Bit 22: Wakeup from Stop mode interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated whenever WUF=1 in the ISR register

BRR

Baud rate register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BRR rw

Toggle fields

BRR

Bits 0-15: DIV_Mantissa.

Allowed values: 0x0-0xffff

GTPR

Guard time and prescaler register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
GT rw								PSC rw

Toggle fields

PSC

Bits 0-7: Prescaler value.

Allowed values: 0x0-0xff

GT

Bits 8-15: Guard time value.

Allowed values: 0x0-0xff

RTOR

Receiver timeout register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BLEN rw								RTO rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RTO rw

Toggle fields

RTO

Bits 0-23: Receiver timeout value.

Allowed values: 0x0-0xffffff

BLEN

Bits 24-31: Block Length.

Allowed values: 0x0-0xff

RQR

Request register

Offset: 0x18, size: 32, reset: 0x00000000, access: write-only

5/5 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
											TXFRQ w	RXFRQ w	MMRQ w	SBKRQ w	ABRRQ w

Toggle fields

ABRRQ

Bit 0: Auto baud rate request.

Allowed values:
1: Request: resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame

SBKRQ

Bit 1: Send break request.

Allowed values:
1: Break: sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available

MMRQ

Bit 2: Mute mode request.

Allowed values:
1: Mute: Puts the USART in mute mode and sets the RWU flag

RXFRQ

Bit 3: Receive data flush request.

Allowed values:
1: Discard: clears the RXNE flag. This allows to discard the received data without reading it, and avoid an overrun condition

TXFRQ

Bit 4: Transmit data flush request.

Allowed values:
1: Discard: Set the TXE flags. This allows to discard the transmit data

ISR

Interrupt & status register

Offset: 0x1c, size: 32, reset: 0x000000C0, access: read-only

22/22 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
									REACK r	TEACK r	WUF r	RWU r	SBKF r	CMF r	BUSY r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ABRF r	ABRE r		EOBF r	RTOF r	CTS r	CTSIF r	LBDF r	TXE r	TC r	RXNE r	IDLE r	ORE r	NF r	FE r	PE r

Toggle fields

PE

Bit 0: PE.

FE

Bit 1: FE.

NF

Bit 2: NF.

ORE

Bit 3: ORE.

IDLE

Bit 4: IDLE.

RXNE

Bit 5: RXNE.

TC

Bit 6: TC.

TXE

Bit 7: TXE.

LBDF

Bit 8: LBDF.

CTSIF

Bit 9: CTSIF.

CTS

Bit 10: CTS.

RTOF

Bit 11: RTOF.

EOBF

Bit 12: EOBF.

ABRE

Bit 14: ABRE.

ABRF

Bit 15: ABRF.

BUSY

Bit 16: BUSY.

CMF

Bit 17: CMF.

SBKF

Bit 18: SBKF.

RWU

Bit 19: RWU.

WUF

Bit 20: WUF.

TEACK

Bit 21: TEACK.

REACK

Bit 22: REACK.

ICR

Interrupt flag clear register

Offset: 0x20, size: 32, reset: 0x00000000, access: write-only

12/12 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
											WUCF w			CMCF w
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			EOBCF w	RTOCF w		CTSCF w	LBDCF w		TCCF w		IDLECF w	ORECF w	NCF w	FECF w	PECF w

Toggle fields

PECF

Bit 0: Parity error clear flag.

Allowed values:
1: Clear: Clears the PE flag in the ISR register

FECF

Bit 1: Framing error clear flag.

Allowed values:
1: Clear: Clears the FE flag in the ISR register

NCF

Bit 2: Noise detected clear flag.

Allowed values:
1: Clear: Clears the NF flag in the ISR register

ORECF

Bit 3: Overrun error clear flag.

Allowed values:
1: Clear: Clears the ORE flag in the ISR register

IDLECF

Bit 4: Idle line detected clear flag.

Allowed values:
1: Clear: Clears the IDLE flag in the ISR register

TCCF

Bit 6: Transmission complete clear flag.

Allowed values:
1: Clear: Clears the TC flag in the ISR register

LBDCF

Bit 8: LIN break detection clear flag.

Allowed values:
1: Clear: Clears the LBDF flag in the ISR register

CTSCF

Bit 9: CTS clear flag.

Allowed values:
1: Clear: Clears the CTSIF flag in the ISR register

RTOCF

Bit 11: Receiver timeout clear flag.

Allowed values:
1: Clear: Clears the RTOF flag in the ISR register

EOBCF

Bit 12: End of block clear flag.

Allowed values:
1: Clear: Clears the EOBF flag in the ISR register

CMCF

Bit 17: Character match clear flag.

Allowed values:
1: Clear: Clears the CMF flag in the ISR register

WUCF

Bit 20: Wakeup from Stop mode clear flag.

Allowed values:
1: Clear: Clears the WUF flag in the ISR register

RDR

Receive data register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							RDR r

Toggle fields

RDR

Bits 0-8: Receive data value.

Allowed values: 0x0-0x1ff

TDR

Transmit data register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							TDR rw

Toggle fields

TDR

Bits 0-8: Transmit data value.

Allowed values: 0x0-0x1ff

USART2

0x40004400: Universal synchronous asynchronous receiver transmitter

104/104 fields covered.

Toggle register map

Offset	Name	31	28	27	26	25	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	CR1		M1	EOBIE	RTOIE	DEAT				DEDT					OVER8	CMIE	MME	M0	WAKE	PCE	PS	PEIE	TXEIE	TCIE	RXNEIE	IDLEIE	TE	RE	UESM	UE
0x4	CR2	ADD					RTOEN	ABRMOD		ABREN	MSBFIRST	DATAINV	TXINV	RXINV	SWAP	LINEN	STOP		CLKEN	CPOL	CPHA	LBCL		LBDIE	LBDL	ADDM7
0x8	CR3							WUFIE	WUS		SCARCNT				DEP	DEM	DDRE	OVRDIS	ONEBIT	CTSIE	CTSE	RTSE	DMAT	DMAR	SCEN	NACK	HDSEL	IRLP	IREN	EIE
0xc	BRR														BRR
0x10	GTPR														GT								PSC
0x14	RTOR	BLEN					RTO								RTO
0x18	RQR																									TXFRQ	RXFRQ	MMRQ	SBKRQ	ABRRQ
0x1c	ISR							REACK	TEACK	WUF	RWU	SBKF	CMF	BUSY	ABRF	ABRE		EOBF	RTOF	CTS	CTSIF	LBDF	TXE	TC	RXNE	IDLE	ORE	NF	FE	PE
0x20	ICR									WUCF			CMCF					EOBCF	RTOCF		CTSCF	LBDCF		TCCF		IDLECF	ORECF	NCF	FECF	PECF
0x24	RDR																					RDR
0x28	TDR																					TDR

Toggle registers

CR1

Control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

21/21 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
			M1 rw	EOBIE rw	RTOIE rw	DEAT rw					DEDT rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OVER8 rw	CMIE rw	MME rw	M0 rw	WAKE rw	PCE rw	PS rw	PEIE rw	TXEIE rw	TCIE rw	RXNEIE rw	IDLEIE rw	TE rw	RE rw	UESM rw	UE rw

Toggle fields

UE

Bit 0: USART enable.

Allowed values:
0: Disabled: UART is disabled
1: Enabled: UART is enabled

UESM

Bit 1: USART enable in Stop mode.

Allowed values:
0: Disabled: USART not able to wake up the MCU from Stop mode
1: Enabled: USART able to wake up the MCU from Stop mode

RE

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver is disabled
1: Enabled: Receiver is enabled

TE

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter is disabled
1: Enabled: Transmitter is enabled

IDLEIE

Bit 4: IDLE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever IDLE=1 in the ISR register

RXNEIE

Bit 5: RXNE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever ORE=1 or RXNE=1 in the ISR register

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TC=1 in the ISR register

TXEIE

Bit 7: interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TXE=1 in the ISR register

PEIE

Bit 8: PE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever PE=1 in the ISR register

PS

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCE

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WAKE

Bit 11: Receiver wakeup method.

Allowed values:
0: Idle: Idle line
1: Address: Address mask

M0

Bit 12: Word length.

Allowed values:
0: Bit8: 1 start bit, 8 data bits, n stop bits
1: Bit9: 1 start bit, 9 data bits, n stop bits

MME

Bit 13: Mute mode enable.

Allowed values:
0: Disabled: Receiver in active mode permanently
1: Enabled: Receiver can switch between mute mode and active mode

CMIE

Bit 14: Character match interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated when the CMF bit is set in the ISR register

OVER8

Bit 15: Oversampling mode.

Allowed values:
0: Oversampling16: Oversampling by 16
1: Oversampling8: Oversampling by 8

DEDT

Bits 16-20: Driver Enable de-assertion time.

Allowed values: 0x0-0x1f

DEAT

Bits 21-25: Driver Enable assertion time.

Allowed values: 0x0-0x1f

RTOIE

Bit 26: Receiver timeout interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated when the RTOF bit is set in the ISR register

EOBIE

Bit 27: End of Block interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: A USART interrupt is generated when the EOBF flag is set in the ISR register

M1

Bit 28: Word length.

Allowed values:
0: M0: Use M0 to set the data bits
1: Bit7: 1 start bit, 7 data bits, n stop bits

CR2

Control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

18/18 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
ADD rw								RTOEN rw	ABRMOD rw		ABREN rw	MSBFIRST rw	DATAINV rw	TXINV rw	RXINV rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SWAP rw	LINEN rw	STOP rw		CLKEN rw	CPOL rw	CPHA rw	LBCL rw		LBDIE rw	LBDL rw	ADDM7 rw

Toggle fields

ADDM7

Bit 4: 7-bit Address Detection/4-bit Address Detection.

Allowed values:
0: Bit4: 4-bit address detection
1: Bit7: 7-bit address detection

LBDL

Bit 5: LIN break detection length.

Allowed values:
0: Bit10: 10-bit break detection
1: Bit11: 11-bit break detection

LBDIE

Bit 6: LIN break detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever LBDF=1 in the ISR register

LBCL

Bit 8: Last bit clock pulse.

Allowed values:
0: NotOutput: The clock pulse of the last data bit is not output to the CK pin
1: Output: The clock pulse of the last data bit is output to the CK pin

CPHA

Bit 9: Clock phase.

Allowed values:
0: First: The first clock transition is the first data capture edge
1: Second: The second clock transition is the first data capture edge

CPOL

Bit 10: Clock polarity.

Allowed values:
0: Low: Steady low value on CK pin outside transmission window
1: High: Steady high value on CK pin outside transmission window

CLKEN

Bit 11: Clock enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STOP

Bits 12-13: STOP bits.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bit
2: Stop2: 2 stop bit
3: Stop1p5: 1.5 stop bit

LINEN

Bit 14: LIN mode enable.

Allowed values:
0: Disabled: LIN mode disabled
1: Enabled: LIN mode enabled

SWAP

Bit 15: Swap TX/RX pins.

Allowed values:
0: Standard: TX/RX pins are used as defined in standard pinout
1: Swapped: The TX and RX pins functions are swapped

RXINV

Bit 16: RX pin active level inversion.

Allowed values:
0: Standard: RX pin signal works using the standard logic levels
1: Inverted: RX pin signal values are inverted

TXINV

Bit 17: TX pin active level inversion.

Allowed values:
0: Standard: TX pin signal works using the standard logic levels
1: Inverted: TX pin signal values are inverted

DATAINV

Bit 18: Binary data inversion.

Allowed values:
0: Positive: Logical data from the data register are send/received in positive/direct logic
1: Negative: Logical data from the data register are send/received in negative/inverse logic

MSBFIRST

Bit 19: Most significant bit first.

Allowed values:
0: LSB: data is transmitted/received with data bit 0 first, following the start bit
1: MSB: data is transmitted/received with MSB (bit 7/8/9) first, following the start bit

ABREN

Bit 20: Auto baud rate enable.

Allowed values:
0: Disabled: Auto baud rate detection is disabled
1: Enabled: Auto baud rate detection is enabled

ABRMOD

Bits 21-22: Auto baud rate mode.

Allowed values:
0: Start: Measurement of the start bit is used to detect the baud rate
1: Edge: Falling edge to falling edge measurement
2: Frame7F: 0x7F frame detection
3: Frame55: 0x55 frame detection

RTOEN

Bit 23: Receiver timeout enable.

Allowed values:
0: Disabled: Receiver timeout feature disabled
1: Enabled: Receiver timeout feature enabled

ADD

Bits 24-31: Address of the USART node.

Allowed values: 0x0-0xff

CR3

Control register 3

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

19/19 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
									WUFIE rw	WUS rw		SCARCNT rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DEP rw	DEM rw	DDRE rw	OVRDIS rw	ONEBIT rw	CTSIE rw	CTSE rw	RTSE rw	DMAT rw	DMAR rw	SCEN rw	NACK rw	HDSEL rw	IRLP rw	IREN rw	EIE rw

Toggle fields

EIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the ISR register

IREN

Bit 1: Ir mode enable.

Allowed values:
0: Disabled: IrDA disabled
1: Enabled: IrDA enabled

IRLP

Bit 2: Ir low-power.

Allowed values:
0: Normal: Normal mode
1: LowPower: Low-power mode

HDSEL

Bit 3: Half-duplex selection.

Allowed values:
0: NotSelected: Half duplex mode is not selected
1: Selected: Half duplex mode is selected

NACK

Bit 4: Smartcard NACK enable.

Allowed values:
0: Disabled: NACK transmission in case of parity error is disabled
1: Enabled: NACK transmission during parity error is enabled

SCEN

Bit 5: Smartcard mode enable.

Allowed values:
0: Disabled: Smartcard Mode disabled
1: Enabled: Smartcard Mode enabled

DMAR

Bit 6: DMA enable receiver.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DMAT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSE

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS output enabled, data is only requested when there is space in the receive buffer

CTSE

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS mode enabled, data is only transmitted when the CTS input is asserted

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever CTSIF=1 in the ISR register

ONEBIT

Bit 11: One sample bit method enable.

Allowed values:
0: Sample3: Three sample bit method
1: Sample1: One sample bit method

OVRDIS

Bit 12: Overrun Disable.

Allowed values:
0: Enabled: Overrun Error Flag, ORE, is set when received data is not read before receiving new data
1: Disabled: Overrun functionality is disabled. If new data is received while the RXNE flag is still set the ORE flag is not set and the new received data overwrites the previous content of the RDR register

DDRE

Bit 13: DMA Disable on Reception Error.

Allowed values:
0: NotDisabled: DMA is not disabled in case of reception error
1: Disabled: DMA is disabled following a reception error

DEM

Bit 14: Driver enable mode.

Allowed values:
0: Disabled: DE function is disabled
1: Enabled: The DE signal is output on the RTS pin

DEP

Bit 15: Driver enable polarity selection.

Allowed values:
0: High: DE signal is active high
1: Low: DE signal is active low

SCARCNT

Bits 17-19: Smartcard auto-retry count.

Allowed values: 0x0-0x7

WUS

Bits 20-21: Wakeup from Stop mode interrupt flag selection.

Allowed values:
0: Address: WUF active on address match
2: Start: WuF active on Start bit detection
3: RXNE: WUF active on RXNE

WUFIE

Bit 22: Wakeup from Stop mode interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated whenever WUF=1 in the ISR register

BRR

Baud rate register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BRR rw

Toggle fields

BRR

Bits 0-15: DIV_Mantissa.

Allowed values: 0x0-0xffff

GTPR

Guard time and prescaler register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
GT rw								PSC rw

Toggle fields

PSC

Bits 0-7: Prescaler value.

Allowed values: 0x0-0xff

GT

Bits 8-15: Guard time value.

Allowed values: 0x0-0xff

RTOR

Receiver timeout register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BLEN rw								RTO rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RTO rw

Toggle fields

RTO

Bits 0-23: Receiver timeout value.

Allowed values: 0x0-0xffffff

BLEN

Bits 24-31: Block Length.

Allowed values: 0x0-0xff

RQR

Request register

Offset: 0x18, size: 32, reset: 0x00000000, access: write-only

5/5 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
											TXFRQ w	RXFRQ w	MMRQ w	SBKRQ w	ABRRQ w

Toggle fields

ABRRQ

Bit 0: Auto baud rate request.

Allowed values:
1: Request: resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame

SBKRQ

Bit 1: Send break request.

Allowed values:
1: Break: sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available

MMRQ

Bit 2: Mute mode request.

Allowed values:
1: Mute: Puts the USART in mute mode and sets the RWU flag

RXFRQ

Bit 3: Receive data flush request.

Allowed values:
1: Discard: clears the RXNE flag. This allows to discard the received data without reading it, and avoid an overrun condition

TXFRQ

Bit 4: Transmit data flush request.

Allowed values:
1: Discard: Set the TXE flags. This allows to discard the transmit data

ISR

Interrupt & status register

Offset: 0x1c, size: 32, reset: 0x000000C0, access: read-only

22/22 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
									REACK r	TEACK r	WUF r	RWU r	SBKF r	CMF r	BUSY r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ABRF r	ABRE r		EOBF r	RTOF r	CTS r	CTSIF r	LBDF r	TXE r	TC r	RXNE r	IDLE r	ORE r	NF r	FE r	PE r

Toggle fields

PE

Bit 0: PE.

FE

Bit 1: FE.

NF

Bit 2: NF.

ORE

Bit 3: ORE.

IDLE

Bit 4: IDLE.

RXNE

Bit 5: RXNE.

TC

Bit 6: TC.

TXE

Bit 7: TXE.

LBDF

Bit 8: LBDF.

CTSIF

Bit 9: CTSIF.

CTS

Bit 10: CTS.

RTOF

Bit 11: RTOF.

EOBF

Bit 12: EOBF.

ABRE

Bit 14: ABRE.

ABRF

Bit 15: ABRF.

BUSY

Bit 16: BUSY.

CMF

Bit 17: CMF.

SBKF

Bit 18: SBKF.

RWU

Bit 19: RWU.

WUF

Bit 20: WUF.

TEACK

Bit 21: TEACK.

REACK

Bit 22: REACK.

ICR

Interrupt flag clear register

Offset: 0x20, size: 32, reset: 0x00000000, access: write-only

12/12 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
											WUCF w			CMCF w
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			EOBCF w	RTOCF w		CTSCF w	LBDCF w		TCCF w		IDLECF w	ORECF w	NCF w	FECF w	PECF w

Toggle fields

PECF

Bit 0: Parity error clear flag.

Allowed values:
1: Clear: Clears the PE flag in the ISR register

FECF

Bit 1: Framing error clear flag.

Allowed values:
1: Clear: Clears the FE flag in the ISR register

NCF

Bit 2: Noise detected clear flag.

Allowed values:
1: Clear: Clears the NF flag in the ISR register

ORECF

Bit 3: Overrun error clear flag.

Allowed values:
1: Clear: Clears the ORE flag in the ISR register

IDLECF

Bit 4: Idle line detected clear flag.

Allowed values:
1: Clear: Clears the IDLE flag in the ISR register

TCCF

Bit 6: Transmission complete clear flag.

Allowed values:
1: Clear: Clears the TC flag in the ISR register

LBDCF

Bit 8: LIN break detection clear flag.

Allowed values:
1: Clear: Clears the LBDF flag in the ISR register

CTSCF

Bit 9: CTS clear flag.

Allowed values:
1: Clear: Clears the CTSIF flag in the ISR register

RTOCF

Bit 11: Receiver timeout clear flag.

Allowed values:
1: Clear: Clears the RTOF flag in the ISR register

EOBCF

Bit 12: End of block clear flag.

Allowed values:
1: Clear: Clears the EOBF flag in the ISR register

CMCF

Bit 17: Character match clear flag.

Allowed values:
1: Clear: Clears the CMF flag in the ISR register

WUCF

Bit 20: Wakeup from Stop mode clear flag.

Allowed values:
1: Clear: Clears the WUF flag in the ISR register

RDR

Receive data register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							RDR r

Toggle fields

RDR

Bits 0-8: Receive data value.

Allowed values: 0x0-0x1ff

TDR

Transmit data register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							TDR rw

Toggle fields

TDR

Bits 0-8: Transmit data value.

Allowed values: 0x0-0x1ff

USART3

0x40004800: Universal synchronous asynchronous receiver transmitter

104/104 fields covered.

Toggle register map

Offset	Name	31	28	27	26	25	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	CR1		M1	EOBIE	RTOIE	DEAT				DEDT					OVER8	CMIE	MME	M0	WAKE	PCE	PS	PEIE	TXEIE	TCIE	RXNEIE	IDLEIE	TE	RE	UESM	UE
0x4	CR2	ADD					RTOEN	ABRMOD		ABREN	MSBFIRST	DATAINV	TXINV	RXINV	SWAP	LINEN	STOP		CLKEN	CPOL	CPHA	LBCL		LBDIE	LBDL	ADDM7
0x8	CR3							WUFIE	WUS		SCARCNT				DEP	DEM	DDRE	OVRDIS	ONEBIT	CTSIE	CTSE	RTSE	DMAT	DMAR	SCEN	NACK	HDSEL	IRLP	IREN	EIE
0xc	BRR														BRR
0x10	GTPR														GT								PSC
0x14	RTOR	BLEN					RTO								RTO
0x18	RQR																									TXFRQ	RXFRQ	MMRQ	SBKRQ	ABRRQ
0x1c	ISR							REACK	TEACK	WUF	RWU	SBKF	CMF	BUSY	ABRF	ABRE		EOBF	RTOF	CTS	CTSIF	LBDF	TXE	TC	RXNE	IDLE	ORE	NF	FE	PE
0x20	ICR									WUCF			CMCF					EOBCF	RTOCF		CTSCF	LBDCF		TCCF		IDLECF	ORECF	NCF	FECF	PECF
0x24	RDR																					RDR
0x28	TDR																					TDR

Toggle registers

CR1

Control register 1

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

21/21 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
			M1 rw	EOBIE rw	RTOIE rw	DEAT rw					DEDT rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
OVER8 rw	CMIE rw	MME rw	M0 rw	WAKE rw	PCE rw	PS rw	PEIE rw	TXEIE rw	TCIE rw	RXNEIE rw	IDLEIE rw	TE rw	RE rw	UESM rw	UE rw

Toggle fields

UE

Bit 0: USART enable.

Allowed values:
0: Disabled: UART is disabled
1: Enabled: UART is enabled

UESM

Bit 1: USART enable in Stop mode.

Allowed values:
0: Disabled: USART not able to wake up the MCU from Stop mode
1: Enabled: USART able to wake up the MCU from Stop mode

RE

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver is disabled
1: Enabled: Receiver is enabled

TE

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter is disabled
1: Enabled: Transmitter is enabled

IDLEIE

Bit 4: IDLE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever IDLE=1 in the ISR register

RXNEIE

Bit 5: RXNE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever ORE=1 or RXNE=1 in the ISR register

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TC=1 in the ISR register

TXEIE

Bit 7: interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever TXE=1 in the ISR register

PEIE

Bit 8: PE interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated whenever PE=1 in the ISR register

PS

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCE

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WAKE

Bit 11: Receiver wakeup method.

Allowed values:
0: Idle: Idle line
1: Address: Address mask

M0

Bit 12: Word length.

Allowed values:
0: Bit8: 1 start bit, 8 data bits, n stop bits
1: Bit9: 1 start bit, 9 data bits, n stop bits

MME

Bit 13: Mute mode enable.

Allowed values:
0: Disabled: Receiver in active mode permanently
1: Enabled: Receiver can switch between mute mode and active mode

CMIE

Bit 14: Character match interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: Interrupt is generated when the CMF bit is set in the ISR register

OVER8

Bit 15: Oversampling mode.

Allowed values:
0: Oversampling16: Oversampling by 16
1: Oversampling8: Oversampling by 8

DEDT

Bits 16-20: Driver Enable de-assertion time.

Allowed values: 0x0-0x1f

DEAT

Bits 21-25: Driver Enable assertion time.

Allowed values: 0x0-0x1f

RTOIE

Bit 26: Receiver timeout interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated when the RTOF bit is set in the ISR register

EOBIE

Bit 27: End of Block interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: A USART interrupt is generated when the EOBF flag is set in the ISR register

M1

Bit 28: Word length.

Allowed values:
0: M0: Use M0 to set the data bits
1: Bit7: 1 start bit, 7 data bits, n stop bits

CR2

Control register 2

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

18/18 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
ADD rw								RTOEN rw	ABRMOD rw		ABREN rw	MSBFIRST rw	DATAINV rw	TXINV rw	RXINV rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
SWAP rw	LINEN rw	STOP rw		CLKEN rw	CPOL rw	CPHA rw	LBCL rw		LBDIE rw	LBDL rw	ADDM7 rw

Toggle fields

ADDM7

Bit 4: 7-bit Address Detection/4-bit Address Detection.

Allowed values:
0: Bit4: 4-bit address detection
1: Bit7: 7-bit address detection

LBDL

Bit 5: LIN break detection length.

Allowed values:
0: Bit10: 10-bit break detection
1: Bit11: 11-bit break detection

LBDIE

Bit 6: LIN break detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever LBDF=1 in the ISR register

LBCL

Bit 8: Last bit clock pulse.

Allowed values:
0: NotOutput: The clock pulse of the last data bit is not output to the CK pin
1: Output: The clock pulse of the last data bit is output to the CK pin

CPHA

Bit 9: Clock phase.

Allowed values:
0: First: The first clock transition is the first data capture edge
1: Second: The second clock transition is the first data capture edge

CPOL

Bit 10: Clock polarity.

Allowed values:
0: Low: Steady low value on CK pin outside transmission window
1: High: Steady high value on CK pin outside transmission window

CLKEN

Bit 11: Clock enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STOP

Bits 12-13: STOP bits.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bit
2: Stop2: 2 stop bit
3: Stop1p5: 1.5 stop bit

LINEN

Bit 14: LIN mode enable.

Allowed values:
0: Disabled: LIN mode disabled
1: Enabled: LIN mode enabled

SWAP

Bit 15: Swap TX/RX pins.

Allowed values:
0: Standard: TX/RX pins are used as defined in standard pinout
1: Swapped: The TX and RX pins functions are swapped

RXINV

Bit 16: RX pin active level inversion.

Allowed values:
0: Standard: RX pin signal works using the standard logic levels
1: Inverted: RX pin signal values are inverted

TXINV

Bit 17: TX pin active level inversion.

Allowed values:
0: Standard: TX pin signal works using the standard logic levels
1: Inverted: TX pin signal values are inverted

DATAINV

Bit 18: Binary data inversion.

Allowed values:
0: Positive: Logical data from the data register are send/received in positive/direct logic
1: Negative: Logical data from the data register are send/received in negative/inverse logic

MSBFIRST

Bit 19: Most significant bit first.

Allowed values:
0: LSB: data is transmitted/received with data bit 0 first, following the start bit
1: MSB: data is transmitted/received with MSB (bit 7/8/9) first, following the start bit

ABREN

Bit 20: Auto baud rate enable.

Allowed values:
0: Disabled: Auto baud rate detection is disabled
1: Enabled: Auto baud rate detection is enabled

ABRMOD

Bits 21-22: Auto baud rate mode.

Allowed values:
0: Start: Measurement of the start bit is used to detect the baud rate
1: Edge: Falling edge to falling edge measurement
2: Frame7F: 0x7F frame detection
3: Frame55: 0x55 frame detection

RTOEN

Bit 23: Receiver timeout enable.

Allowed values:
0: Disabled: Receiver timeout feature disabled
1: Enabled: Receiver timeout feature enabled

ADD

Bits 24-31: Address of the USART node.

Allowed values: 0x0-0xff

CR3

Control register 3

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

19/19 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
									WUFIE rw	WUS rw		SCARCNT rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DEP rw	DEM rw	DDRE rw	OVRDIS rw	ONEBIT rw	CTSIE rw	CTSE rw	RTSE rw	DMAT rw	DMAR rw	SCEN rw	NACK rw	HDSEL rw	IRLP rw	IREN rw	EIE rw

Toggle fields

EIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the ISR register

IREN

Bit 1: Ir mode enable.

Allowed values:
0: Disabled: IrDA disabled
1: Enabled: IrDA enabled

IRLP

Bit 2: Ir low-power.

Allowed values:
0: Normal: Normal mode
1: LowPower: Low-power mode

HDSEL

Bit 3: Half-duplex selection.

Allowed values:
0: NotSelected: Half duplex mode is not selected
1: Selected: Half duplex mode is selected

NACK

Bit 4: Smartcard NACK enable.

Allowed values:
0: Disabled: NACK transmission in case of parity error is disabled
1: Enabled: NACK transmission during parity error is enabled

SCEN

Bit 5: Smartcard mode enable.

Allowed values:
0: Disabled: Smartcard Mode disabled
1: Enabled: Smartcard Mode enabled

DMAR

Bit 6: DMA enable receiver.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DMAT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSE

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS output enabled, data is only requested when there is space in the receive buffer

CTSE

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS mode enabled, data is only transmitted when the CTS input is asserted

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An interrupt is generated whenever CTSIF=1 in the ISR register

ONEBIT

Bit 11: One sample bit method enable.

Allowed values:
0: Sample3: Three sample bit method
1: Sample1: One sample bit method

OVRDIS

Bit 12: Overrun Disable.

Allowed values:
0: Enabled: Overrun Error Flag, ORE, is set when received data is not read before receiving new data
1: Disabled: Overrun functionality is disabled. If new data is received while the RXNE flag is still set the ORE flag is not set and the new received data overwrites the previous content of the RDR register

DDRE

Bit 13: DMA Disable on Reception Error.

Allowed values:
0: NotDisabled: DMA is not disabled in case of reception error
1: Disabled: DMA is disabled following a reception error

DEM

Bit 14: Driver enable mode.

Allowed values:
0: Disabled: DE function is disabled
1: Enabled: The DE signal is output on the RTS pin

DEP

Bit 15: Driver enable polarity selection.

Allowed values:
0: High: DE signal is active high
1: Low: DE signal is active low

SCARCNT

Bits 17-19: Smartcard auto-retry count.

Allowed values: 0x0-0x7

WUS

Bits 20-21: Wakeup from Stop mode interrupt flag selection.

Allowed values:
0: Address: WUF active on address match
2: Start: WuF active on Start bit detection
3: RXNE: WUF active on RXNE

WUFIE

Bit 22: Wakeup from Stop mode interrupt enable.

Allowed values:
0: Disabled: Interrupt is inhibited
1: Enabled: An USART interrupt is generated whenever WUF=1 in the ISR register

BRR

Baud rate register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BRR rw

Toggle fields

BRR

Bits 0-15: DIV_Mantissa.

Allowed values: 0x0-0xffff

GTPR

Guard time and prescaler register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
GT rw								PSC rw

Toggle fields

PSC

Bits 0-7: Prescaler value.

Allowed values: 0x0-0xff

GT

Bits 8-15: Guard time value.

Allowed values: 0x0-0xff

RTOR

Receiver timeout register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

2/2 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
BLEN rw								RTO rw
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RTO rw

Toggle fields

RTO

Bits 0-23: Receiver timeout value.

Allowed values: 0x0-0xffffff

BLEN

Bits 24-31: Block Length.

Allowed values: 0x0-0xff

RQR

Request register

Offset: 0x18, size: 32, reset: 0x00000000, access: write-only

5/5 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
											TXFRQ w	RXFRQ w	MMRQ w	SBKRQ w	ABRRQ w

Toggle fields

ABRRQ

Bit 0: Auto baud rate request.

Allowed values:
1: Request: resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame

SBKRQ

Bit 1: Send break request.

Allowed values:
1: Break: sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available

MMRQ

Bit 2: Mute mode request.

Allowed values:
1: Mute: Puts the USART in mute mode and sets the RWU flag

RXFRQ

Bit 3: Receive data flush request.

Allowed values:
1: Discard: clears the RXNE flag. This allows to discard the received data without reading it, and avoid an overrun condition

TXFRQ

Bit 4: Transmit data flush request.

Allowed values:
1: Discard: Set the TXE flags. This allows to discard the transmit data

ISR

Interrupt & status register

Offset: 0x1c, size: 32, reset: 0x000000C0, access: read-only

22/22 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
									REACK r	TEACK r	WUF r	RWU r	SBKF r	CMF r	BUSY r
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ABRF r	ABRE r		EOBF r	RTOF r	CTS r	CTSIF r	LBDF r	TXE r	TC r	RXNE r	IDLE r	ORE r	NF r	FE r	PE r

Toggle fields

PE

Bit 0: PE.

FE

Bit 1: FE.

NF

Bit 2: NF.

ORE

Bit 3: ORE.

IDLE

Bit 4: IDLE.

RXNE

Bit 5: RXNE.

TC

Bit 6: TC.

TXE

Bit 7: TXE.

LBDF

Bit 8: LBDF.

CTSIF

Bit 9: CTSIF.

CTS

Bit 10: CTS.

RTOF

Bit 11: RTOF.

EOBF

Bit 12: EOBF.

ABRE

Bit 14: ABRE.

ABRF

Bit 15: ABRF.

BUSY

Bit 16: BUSY.

CMF

Bit 17: CMF.

SBKF

Bit 18: SBKF.

RWU

Bit 19: RWU.

WUF

Bit 20: WUF.

TEACK

Bit 21: TEACK.

REACK

Bit 22: REACK.

ICR

Interrupt flag clear register

Offset: 0x20, size: 32, reset: 0x00000000, access: write-only

12/12 fields covered.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
											WUCF w			CMCF w
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
			EOBCF w	RTOCF w		CTSCF w	LBDCF w		TCCF w		IDLECF w	ORECF w	NCF w	FECF w	PECF w

Toggle fields

PECF

Bit 0: Parity error clear flag.

Allowed values:
1: Clear: Clears the PE flag in the ISR register

FECF

Bit 1: Framing error clear flag.

Allowed values:
1: Clear: Clears the FE flag in the ISR register

NCF

Bit 2: Noise detected clear flag.

Allowed values:
1: Clear: Clears the NF flag in the ISR register

ORECF

Bit 3: Overrun error clear flag.

Allowed values:
1: Clear: Clears the ORE flag in the ISR register

IDLECF

Bit 4: Idle line detected clear flag.

Allowed values:
1: Clear: Clears the IDLE flag in the ISR register

TCCF

Bit 6: Transmission complete clear flag.

Allowed values:
1: Clear: Clears the TC flag in the ISR register

LBDCF

Bit 8: LIN break detection clear flag.

Allowed values:
1: Clear: Clears the LBDF flag in the ISR register

CTSCF

Bit 9: CTS clear flag.

Allowed values:
1: Clear: Clears the CTSIF flag in the ISR register

RTOCF

Bit 11: Receiver timeout clear flag.

Allowed values:
1: Clear: Clears the RTOF flag in the ISR register

EOBCF

Bit 12: End of block clear flag.

Allowed values:
1: Clear: Clears the EOBF flag in the ISR register

CMCF

Bit 17: Character match clear flag.

Allowed values:
1: Clear: Clears the CMF flag in the ISR register

WUCF

Bit 20: Wakeup from Stop mode clear flag.

Allowed values:
1: Clear: Clears the WUF flag in the ISR register

RDR

Receive data register

Offset: 0x24, size: 32, reset: 0x00000000, access: read-only

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							RDR r

Toggle fields

RDR

Bits 0-8: Receive data value.

Allowed values: 0x0-0x1ff

TDR

Transmit data register

Offset: 0x28, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
							TDR rw

Toggle fields

TDR

Bits 0-8: Transmit data value.

Allowed values: 0x0-0x1ff

USB

0x40006800: Universal serial bus full-speed device interface

12/123 fields covered.

Toggle register map

Offset	Name	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	EP0R	CTR_RX	DTOG_RX	STAT_RX		SETUP	EP_TYPE		EP_KIND	CTR_TX	DTOG_TX	STAT_TX		EA
0x4	EP1R	CTR_RX	DTOG_RX	STAT_RX		SETUP	EP_TYPE		EP_KIND	CTR_TX	DTOG_TX	STAT_TX		EA
0x8	EP2R	CTR_RX	DTOG_RX	STAT_RX		SETUP	EP_TYPE		EP_KIND	CTR_TX	DTOG_TX	STAT_TX		EA
0xc	EP3R	CTR_RX	DTOG_RX	STAT_RX		SETUP	EP_TYPE		EP_KIND	CTR_TX	DTOG_TX	STAT_TX		EA
0x10	EP4R	CTR_RX	DTOG_RX	STAT_RX		SETUP	EP_TYPE		EP_KIND	CTR_TX	DTOG_TX	STAT_TX		EA
0x14	EP5R	CTR_RX	DTOG_RX	STAT_RX		SETUP	EP_TYPE		EP_KIND	CTR_TX	DTOG_TX	STAT_TX		EA
0x18	EP6R	CTR_RX	DTOG_RX	STAT_RX		SETUP	EP_TYPE		EP_KIND	CTR_TX	DTOG_TX	STAT_TX		EA
0x1c	EP7R	CTR_RX	DTOG_RX	STAT_RX		SETUP	EP_TYPE		EP_KIND	CTR_TX	DTOG_TX	STAT_TX		EA
0x40	CNTR	CTRM	PMAOVRM	ERRM	WKUPM	SUSPM	RESETM	SOFM	ESOFM	L1REQM		L1RESUME	RESUME	FSUSP	LPMODE	PDWN	FRES
0x44	ISTR	CTR	PMAOVR	ERR	WKUP	SUSP	RESET	SOF	ESOF	L1REQ			DIR	EP_ID
0x48	FNR	RXDP	RXDM	LCK	LSOF		FN
0x4c	DADDR									EF	ADD
0x50	BTABLE	BTABLE
0x58 (16-bit)	BCDR	DPPU								PS2DET	SDET	PDET	DCDET	SDEN	PDEN	DCDEN	BCDEN

Toggle registers

EP0R

endpoint 0 register

Offset: 0x0, size: 32, reset: 0x00000000, access: read-write

0/10 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CTR_RX rw	DTOG_RX rw	STAT_RX rw		SETUP rw	EP_TYPE rw		EP_KIND rw	CTR_TX rw	DTOG_TX rw	STAT_TX rw		EA rw

Toggle fields

EA

Bits 0-3: Endpoint address.

STAT_TX

Bits 4-5: Status bits, for transmission transfers.

DTOG_TX

Bit 6: Data Toggle, for transmission transfers.

CTR_TX

Bit 7: Correct Transfer for transmission.

EP_KIND

Bit 8: Endpoint kind.

EP_TYPE

Bits 9-10: Endpoint type.

SETUP

Bit 11: Setup transaction completed.

STAT_RX

Bits 12-13: Status bits, for reception transfers.

DTOG_RX

Bit 14: Data Toggle, for reception transfers.

CTR_RX

Bit 15: Correct transfer for reception.

EP1R

endpoint 1 register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

0/10 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CTR_RX rw	DTOG_RX rw	STAT_RX rw		SETUP rw	EP_TYPE rw		EP_KIND rw	CTR_TX rw	DTOG_TX rw	STAT_TX rw		EA rw

Toggle fields

EA

Bits 0-3: Endpoint address.

STAT_TX

Bits 4-5: Status bits, for transmission transfers.

DTOG_TX

Bit 6: Data Toggle, for transmission transfers.

CTR_TX

Bit 7: Correct Transfer for transmission.

EP_KIND

Bit 8: Endpoint kind.

EP_TYPE

Bits 9-10: Endpoint type.

SETUP

Bit 11: Setup transaction completed.

STAT_RX

Bits 12-13: Status bits, for reception transfers.

DTOG_RX

Bit 14: Data Toggle, for reception transfers.

CTR_RX

Bit 15: Correct transfer for reception.

EP2R

endpoint 2 register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

0/10 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CTR_RX rw	DTOG_RX rw	STAT_RX rw		SETUP rw	EP_TYPE rw		EP_KIND rw	CTR_TX rw	DTOG_TX rw	STAT_TX rw		EA rw

Toggle fields

EA

Bits 0-3: Endpoint address.

STAT_TX

Bits 4-5: Status bits, for transmission transfers.

DTOG_TX

Bit 6: Data Toggle, for transmission transfers.

CTR_TX

Bit 7: Correct Transfer for transmission.

EP_KIND

Bit 8: Endpoint kind.

EP_TYPE

Bits 9-10: Endpoint type.

SETUP

Bit 11: Setup transaction completed.

STAT_RX

Bits 12-13: Status bits, for reception transfers.

DTOG_RX

Bit 14: Data Toggle, for reception transfers.

CTR_RX

Bit 15: Correct transfer for reception.

EP3R

endpoint 3 register

Offset: 0xc, size: 32, reset: 0x00000000, access: read-write

0/10 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CTR_RX rw	DTOG_RX rw	STAT_RX rw		SETUP rw	EP_TYPE rw		EP_KIND rw	CTR_TX rw	DTOG_TX rw	STAT_TX rw		EA rw

Toggle fields

EA

Bits 0-3: Endpoint address.

STAT_TX

Bits 4-5: Status bits, for transmission transfers.

DTOG_TX

Bit 6: Data Toggle, for transmission transfers.

CTR_TX

Bit 7: Correct Transfer for transmission.

EP_KIND

Bit 8: Endpoint kind.

EP_TYPE

Bits 9-10: Endpoint type.

SETUP

Bit 11: Setup transaction completed.

STAT_RX

Bits 12-13: Status bits, for reception transfers.

DTOG_RX

Bit 14: Data Toggle, for reception transfers.

CTR_RX

Bit 15: Correct transfer for reception.

EP4R

endpoint 4 register

Offset: 0x10, size: 32, reset: 0x00000000, access: read-write

0/10 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CTR_RX rw	DTOG_RX rw	STAT_RX rw		SETUP rw	EP_TYPE rw		EP_KIND rw	CTR_TX rw	DTOG_TX rw	STAT_TX rw		EA rw

Toggle fields

EA

Bits 0-3: Endpoint address.

STAT_TX

Bits 4-5: Status bits, for transmission transfers.

DTOG_TX

Bit 6: Data Toggle, for transmission transfers.

CTR_TX

Bit 7: Correct Transfer for transmission.

EP_KIND

Bit 8: Endpoint kind.

EP_TYPE

Bits 9-10: Endpoint type.

SETUP

Bit 11: Setup transaction completed.

STAT_RX

Bits 12-13: Status bits, for reception transfers.

DTOG_RX

Bit 14: Data Toggle, for reception transfers.

CTR_RX

Bit 15: Correct transfer for reception.

EP5R

endpoint 5 register

Offset: 0x14, size: 32, reset: 0x00000000, access: read-write

0/10 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CTR_RX rw	DTOG_RX rw	STAT_RX rw		SETUP rw	EP_TYPE rw		EP_KIND rw	CTR_TX rw	DTOG_TX rw	STAT_TX rw		EA rw

Toggle fields

EA

Bits 0-3: Endpoint address.

STAT_TX

Bits 4-5: Status bits, for transmission transfers.

DTOG_TX

Bit 6: Data Toggle, for transmission transfers.

CTR_TX

Bit 7: Correct Transfer for transmission.

EP_KIND

Bit 8: Endpoint kind.

EP_TYPE

Bits 9-10: Endpoint type.

SETUP

Bit 11: Setup transaction completed.

STAT_RX

Bits 12-13: Status bits, for reception transfers.

DTOG_RX

Bit 14: Data Toggle, for reception transfers.

CTR_RX

Bit 15: Correct transfer for reception.

EP6R

endpoint 6 register

Offset: 0x18, size: 32, reset: 0x00000000, access: read-write

0/10 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CTR_RX rw	DTOG_RX rw	STAT_RX rw		SETUP rw	EP_TYPE rw		EP_KIND rw	CTR_TX rw	DTOG_TX rw	STAT_TX rw		EA rw

Toggle fields

EA

Bits 0-3: Endpoint address.

STAT_TX

Bits 4-5: Status bits, for transmission transfers.

DTOG_TX

Bit 6: Data Toggle, for transmission transfers.

CTR_TX

Bit 7: Correct Transfer for transmission.

EP_KIND

Bit 8: Endpoint kind.

EP_TYPE

Bits 9-10: Endpoint type.

SETUP

Bit 11: Setup transaction completed.

STAT_RX

Bits 12-13: Status bits, for reception transfers.

DTOG_RX

Bit 14: Data Toggle, for reception transfers.

CTR_RX

Bit 15: Correct transfer for reception.

EP7R

endpoint 7 register

Offset: 0x1c, size: 32, reset: 0x00000000, access: read-write

0/10 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CTR_RX rw	DTOG_RX rw	STAT_RX rw		SETUP rw	EP_TYPE rw		EP_KIND rw	CTR_TX rw	DTOG_TX rw	STAT_TX rw		EA rw

Toggle fields

EA

Bits 0-3: Endpoint address.

STAT_TX

Bits 4-5: Status bits, for transmission transfers.

DTOG_TX

Bit 6: Data Toggle, for transmission transfers.

CTR_TX

Bit 7: Correct Transfer for transmission.

EP_KIND

Bit 8: Endpoint kind.

EP_TYPE

Bits 9-10: Endpoint type.

SETUP

Bit 11: Setup transaction completed.

STAT_RX

Bits 12-13: Status bits, for reception transfers.

DTOG_RX

Bit 14: Data Toggle, for reception transfers.

CTR_RX

Bit 15: Correct transfer for reception.

CNTR

control register

Offset: 0x40, size: 32, reset: 0x00000003, access: read-write

0/15 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CTRM rw	PMAOVRM rw	ERRM rw	WKUPM rw	SUSPM rw	RESETM rw	SOFM rw	ESOFM rw	L1REQM rw		L1RESUME rw	RESUME rw	FSUSP rw	LPMODE rw	PDWN rw	FRES rw

Toggle fields

FRES

Bit 0: Force USB Reset.

PDWN

Bit 1: Power down.

LPMODE

Bit 2: Low-power mode.

FSUSP

Bit 3: Force suspend.

RESUME

Bit 4: Resume request.

L1RESUME

Bit 5: LPM L1 Resume request.

L1REQM

Bit 7: LPM L1 state request interrupt mask.

ESOFM

Bit 8: Expected start of frame interrupt mask.

SOFM

Bit 9: Start of frame interrupt mask.

RESETM

Bit 10: USB reset interrupt mask.

SUSPM

Bit 11: Suspend mode interrupt mask.

WKUPM

Bit 12: Wakeup interrupt mask.

ERRM

Bit 13: Error interrupt mask.

PMAOVRM

Bit 14: Packet memory area over / underrun interrupt mask.

CTRM

Bit 15: Correct transfer interrupt mask.

ISTR

interrupt status register

Offset: 0x44, size: 32, reset: 0x00000000, access: Unspecified

3/11 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
CTR r	PMAOVR rw	ERR rw	WKUP rw	SUSP rw	RESET rw	SOF rw	ESOF rw	L1REQ rw			DIR r	EP_ID r

Toggle fields

EP_ID

Bits 0-3: Endpoint Identifier.

DIR

Bit 4: Direction of transaction.

L1REQ

Bit 7: LPM L1 state request.

ESOF

Bit 8: Expected start frame.

SOF

Bit 9: start of frame.

RESET

Bit 10: reset request.

SUSP

Bit 11: Suspend mode request.

WKUP

Bit 12: Wakeup.

ERR

Bit 13: Error.

PMAOVR

Bit 14: Packet memory area over / underrun.

CTR

Bit 15: Correct transfer.

FNR

frame number register

Offset: 0x48, size: 32, reset: 0x00000000, access: read-only

5/5 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RXDP r	RXDM r	LCK r	LSOF r		FN r

Toggle fields

FN

Bits 0-10: Frame number.

LSOF

Bits 11-12: Lost SOF.

LCK

Bit 13: Locked.

RXDM

Bit 14: Receive data - line status.

RXDP

Bit 15: Receive data + line status.

DADDR

device address

Offset: 0x4c, size: 32, reset: 0x00000000, access: read-write

0/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								EF rw	ADD rw

Toggle fields

ADD

Bits 0-6: Device address.

EF

Bit 7: Enable function.

BTABLE

Buffer table address

Offset: 0x50, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
BTABLE rw

Toggle fields

BTABLE

Bits 3-15: Buffer table.

BCDR

Battery charging detector

Offset: 0x58, size: 16, reset: 0x00000000, access: read-write

4/9 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
DPPU rw								PS2DET r	SDET r	PDET r	DCDET r	SDEN rw	PDEN rw	DCDEN rw	BCDEN rw

Toggle fields

BCDEN

Bit 0: Battery charging detector (BCD) enable.

DCDEN

Bit 1: Data contact detection (DCD) mode enable.

PDEN

Bit 2: Primary detection (PD) mode enable.

SDEN

Bit 3: Secondary detection (SD) mode enable.

DCDET

Bit 4: Data contact detection (DCD) status.

PDET

Bit 5: Primary detection (PD) status.

SDET

Bit 6: Secondary detection (SD) status.

PS2DET

Bit 7: DM pull-up detection status.

DPPU

Bit 15: DP pull-up control.

VREFBUF

0x40010030: Voltage reference buffer

1/5 fields covered.

Toggle register map

Offset	Name	31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0x0	CSR																													VRR	VRS	HIZ	ENVR
0x4	CCR																											TRIM

Toggle registers

CSR

VREF control and status register

Offset: 0x0, size: 32, reset: 0x00000002, access: Unspecified

1/4 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
												VRR r	VRS rw	HIZ rw	ENVR rw

Toggle fields

ENVR

Bit 0: Voltage reference buffer enable.

HIZ

Bit 1: High impedance mode.

VRS

Bit 2: Voltage reference scale.

VRR

Bit 3: Voltage reference buffer ready.

CCR

calibration control register

Offset: 0x4, size: 32, reset: 0x00000000, access: read-write

0/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
										TRIM rw

Toggle fields

TRIM

Bits 0-5: Trimming code.

WWDG

0x40002c00: System window watchdog

6/6 fields covered.

Toggle register map

Offset	Name	9	8	7	6	0
0x0	CR			WDGA	T
0x4	CFR	EWI	WDGTB		W
0x8	SR					EWIF

Toggle registers

CR

Control register

Offset: 0x0, size: 32, reset: 0x0000007F, access: read-write

2/2 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
								WDGA rw	T rw

Toggle fields

T

Bits 0-6: 7-bit counter (MSB to LSB).

Allowed values: 0x0-0x7f

WDGA

Bit 7: Activation bit.

Allowed values:
0: Disabled: Watchdog disabled
1: Enabled: Watchdog enabled

CFR

Configuration register

Offset: 0x4, size: 32, reset: 0x0000007F, access: read-write

3/3 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
						EWI rw	WDGTB rw		W rw

Toggle fields

W

Bits 0-6: 7-bit window value.

Allowed values: 0x0-0x7f

WDGTB

Bits 7-8: Timer base.

Allowed values:
0: Div1: Counter clock (PCLK1 div 4096) div 1
1: Div2: Counter clock (PCLK1 div 4096) div 2
2: Div4: Counter clock (PCLK1 div 4096) div 4
3: Div8: Counter clock (PCLK1 div 4096) div 8

EWI

Bit 9: Early wakeup interrupt.

Allowed values:
1: Enable: interrupt occurs whenever the counter reaches the value 0x40

SR

Status register

Offset: 0x8, size: 32, reset: 0x00000000, access: read-write

1/1 fields covered.

15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
															EWIF rw

Toggle fields

EWIF

Bit 0: Early wakeup interrupt flag.

Allowed values:
0: Finished: The EWI Interrupt Service Routine has been serviced
1: Pending: The EWI Interrupt Service Routine has been triggered