1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170
use super::Timeout;
/// TCXO trim.
///
/// **Note:** To use V<sub>DDTCXO</sub>, the V<sub>DDRF</sub> supply must be at
/// least + 200 mV higher than the selected `TcxoTrim` voltage level.
///
/// Used by [`TcxoMode`].
#[derive(Debug, PartialEq, Eq, PartialOrd, Ord, Clone, Copy)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[repr(u8)]
pub enum TcxoTrim {
/// 1.6V
Volts1pt6 = 0x0,
/// 1.7V
Volts1pt7 = 0x1,
/// 1.8V
Volts1pt8 = 0x2,
/// 2.2V
Volts2pt2 = 0x3,
/// 2.4V
Volts2pt4 = 0x4,
/// 2.7V
Volts2pt7 = 0x5,
/// 3.0V
Volts3pt0 = 0x6,
/// 3.3V
Volts3pt3 = 0x7,
}
impl core::fmt::Display for TcxoTrim {
fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
match self {
TcxoTrim::Volts1pt6 => write!(f, "1.6V"),
TcxoTrim::Volts1pt7 => write!(f, "1.7V"),
TcxoTrim::Volts1pt8 => write!(f, "1.8V"),
TcxoTrim::Volts2pt2 => write!(f, "2.2V"),
TcxoTrim::Volts2pt4 => write!(f, "2.4V"),
TcxoTrim::Volts2pt7 => write!(f, "2.7V"),
TcxoTrim::Volts3pt0 => write!(f, "3.0V"),
TcxoTrim::Volts3pt3 => write!(f, "3.3V"),
}
}
}
impl TcxoTrim {
/// Get the value of the TCXO trim in millivolts.
///
/// # Example
///
/// ```
/// use stm32wlxx_hal::subghz::TcxoTrim;
///
/// assert_eq!(TcxoTrim::Volts1pt6.as_millivolts(), 1600);
/// assert_eq!(TcxoTrim::Volts1pt7.as_millivolts(), 1700);
/// assert_eq!(TcxoTrim::Volts1pt8.as_millivolts(), 1800);
/// assert_eq!(TcxoTrim::Volts2pt2.as_millivolts(), 2200);
/// assert_eq!(TcxoTrim::Volts2pt4.as_millivolts(), 2400);
/// assert_eq!(TcxoTrim::Volts2pt7.as_millivolts(), 2700);
/// assert_eq!(TcxoTrim::Volts3pt0.as_millivolts(), 3000);
/// assert_eq!(TcxoTrim::Volts3pt3.as_millivolts(), 3300);
/// ```
pub const fn as_millivolts(&self) -> u16 {
match self {
TcxoTrim::Volts1pt6 => 1600,
TcxoTrim::Volts1pt7 => 1700,
TcxoTrim::Volts1pt8 => 1800,
TcxoTrim::Volts2pt2 => 2200,
TcxoTrim::Volts2pt4 => 2400,
TcxoTrim::Volts2pt7 => 2700,
TcxoTrim::Volts3pt0 => 3000,
TcxoTrim::Volts3pt3 => 3300,
}
}
}
/// TCXO trim and HSE32 ready timeout.
///
/// Argument of [`set_tcxo_mode`].
///
/// [`set_tcxo_mode`]: super::SubGhz::set_tcxo_mode
#[derive(Debug, PartialEq, Eq, Clone, Copy)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
pub struct TcxoMode {
buf: [u8; 5],
}
impl TcxoMode {
/// Create a new `TcxoMode` struct.
///
/// This is the same as `default`, but in a `const` function.
///
/// # Example
///
/// ```
/// use stm32wlxx_hal::subghz::TcxoMode;
///
/// const TCXO_MODE: TcxoMode = TcxoMode::new();
/// ```
pub const fn new() -> TcxoMode {
TcxoMode {
buf: [super::OpCode::SetTcxoMode as u8, 0x00, 0x00, 0x00, 0x00],
}
}
/// Set the TCXO trim.
///
/// **Note:** To use V<sub>DDTCXO</sub>, the V<sub>DDRF</sub> supply must be
/// at least + 200 mV higher than the selected `TcxoTrim` voltage level.
///
/// # Example
///
/// ```
/// use stm32wlxx_hal::subghz::{TcxoMode, TcxoTrim};
///
/// const TCXO_MODE: TcxoMode = TcxoMode::new().set_tcxo_trim(TcxoTrim::Volts1pt6);
/// # assert_eq!(TCXO_MODE.as_slice()[1], 0x00);
/// ```
#[must_use = "set_tcxo_trim returns a modified TcxoMode"]
pub const fn set_tcxo_trim(mut self, tcxo_trim: TcxoTrim) -> TcxoMode {
self.buf[1] = tcxo_trim as u8;
self
}
/// Set the ready timeout duration.
///
/// # Example
///
/// ```
/// use core::time::Duration;
/// use stm32wlxx_hal::subghz::{TcxoMode, Timeout};
///
/// // 15.625 ms timeout
/// const TIMEOUT: Timeout = Timeout::from_duration_sat(Duration::from_millis(15_625));
/// const TCXO_MODE: TcxoMode = TcxoMode::new().set_timeout(TIMEOUT);
/// # assert_eq!(TCXO_MODE.as_slice()[2], 0x0F);
/// # assert_eq!(TCXO_MODE.as_slice()[3], 0x42);
/// # assert_eq!(TCXO_MODE.as_slice()[4], 0x40);
/// ```
#[must_use = "set_timeout returns a modified TcxoMode"]
pub const fn set_timeout(mut self, timeout: Timeout) -> TcxoMode {
let timeout_bits: u32 = timeout.into_bits();
self.buf[2] = ((timeout_bits >> 16) & 0xFF) as u8;
self.buf[3] = ((timeout_bits >> 8) & 0xFF) as u8;
self.buf[4] = (timeout_bits & 0xFF) as u8;
self
}
/// Extracts a slice containing the packet.
///
/// # Example
///
/// ```
/// use stm32wlxx_hal::subghz::{TcxoMode, TcxoTrim, Timeout};
///
/// const TCXO_MODE: TcxoMode = TcxoMode::new()
/// .set_tcxo_trim(TcxoTrim::Volts1pt7)
/// .set_timeout(Timeout::from_raw(0x123456));
/// assert_eq!(TCXO_MODE.as_slice(), &[0x97, 0x1, 0x12, 0x34, 0x56]);
/// ```
pub const fn as_slice(&self) -> &[u8] {
&self.buf
}
}
impl Default for TcxoMode {
fn default() -> Self {
Self::new()
}
}