Module stm32wlxx_hal::pac::usart1::cr2

Available on crate feature stm32wl5x_cm4 only.

control register 2

Structs

• CR2_SPEC
  control register 2
• R
  Register CR2 reader
• W
  Register CR2 writer

Enums

• ABREN_A
  Auto baud rate enable
• ABRMOD_A
  Auto baud rate mode
• ADDM7_A
  7-bit Address Detection/4-bit Address Detection
• CLKEN_A
  Clock enable
• CPHA_A
  Clock phase
• CPOL_A
  Clock polarity
• DATAINV_A
  Binary data inversion
• DIS_NSS_A
  DIS_NSS
• LBCL_A
  Last bit clock pulse
• LBDIE_A
  LIN break detection interrupt enable
• LBDL_A
  LIN break detection length
• LINEN_A
  LIN mode enable
• MSBFIRST_A
  Most significant bit first
• RTOEN_A
  Receiver timeout enable
• RXINV_A
  RX pin active level inversion
• SLVEN_A
  Synchronous Slave mode enable
• STOP_A
  stop bits
• SWAP_A
  Swap TX/RX pins
• TXINV_A
  TX pin active level inversion

Type Aliases

• ABREN_R
  Field ABREN reader - Auto baud rate enable
• ABREN_W
  Field ABREN writer - Auto baud rate enable
• ABRMOD_R
  Field ABRMOD reader - Auto baud rate mode
• ABRMOD_W
  Field ABRMOD writer - Auto baud rate mode
• ADDM7_R
  Field ADDM7 reader - 7-bit Address Detection/4-bit Address Detection
• ADDM7_W
  Field ADDM7 writer - 7-bit Address Detection/4-bit Address Detection
• ADD_R
  Field ADD reader - Address of the USART node
• ADD_W
  Field ADD writer - Address of the USART node
• CLKEN_R
  Field CLKEN reader - Clock enable
• CLKEN_W
  Field CLKEN writer - Clock enable
• CPHA_R
  Field CPHA reader - Clock phase
• CPHA_W
  Field CPHA writer - Clock phase
• CPOL_R
  Field CPOL reader - Clock polarity
• CPOL_W
  Field CPOL writer - Clock polarity
• DATAINV_R
  Field DATAINV reader - Binary data inversion
• DATAINV_W
  Field DATAINV writer - Binary data inversion
• DIS_NSS_R
  Field DIS_NSS reader - DIS_NSS
• DIS_NSS_W
  Field DIS_NSS writer - DIS_NSS
• LBCL_R
  Field LBCL reader - Last bit clock pulse
• LBCL_W
  Field LBCL writer - Last bit clock pulse
• LBDIE_R
  Field LBDIE reader - LIN break detection interrupt enable
• LBDIE_W
  Field LBDIE writer - LIN break detection interrupt enable
• LBDL_R
  Field LBDL reader - LIN break detection length
• LBDL_W
  Field LBDL writer - LIN break detection length
• LINEN_R
  Field LINEN reader - LIN mode enable
• LINEN_W
  Field LINEN writer - LIN mode enable
• MSBFIRST_R
  Field MSBFIRST reader - Most significant bit first
• MSBFIRST_W
  Field MSBFIRST writer - Most significant bit first
• RTOEN_R
  Field RTOEN reader - Receiver timeout enable
• RTOEN_W
  Field RTOEN writer - Receiver timeout enable
• RXINV_R
  Field RXINV reader - RX pin active level inversion
• RXINV_W
  Field RXINV writer - RX pin active level inversion
• SLVEN_R
  Field SLVEN reader - Synchronous Slave mode enable
• SLVEN_W
  Field SLVEN writer - Synchronous Slave mode enable
• STOP_R
  Field STOP reader - stop bits
• STOP_W
  Field STOP writer - stop bits
• SWAP_R
  Field SWAP reader - Swap TX/RX pins
• SWAP_W
  Field SWAP writer - Swap TX/RX pins
• TXINV_R
  Field TXINV reader - TX pin active level inversion
• TXINV_W
  Field TXINV writer - TX pin active level inversion