Struct stm32wlxx_hal::pac::comp::comp1_csr::W

pub struct W(/* private fields */);
Available on crate feature stm32wl5x_cm4 only.
Expand description

Register COMP1_CSR writer

Implementations§

§

impl W

pub fn lock( &mut self ) -> BitWriterRaw<'_, u32, COMP1_CSR_SPEC, LOCK_A, BitM, 31>

Bit 31 - COMP1_CSR register lock bit

pub fn inmesel( &mut self ) -> FieldWriterRaw<'_, u32, COMP1_CSR_SPEC, u8, INMESEL_A, Unsafe, 2, 25>

Bits 25:26 - comparator 1 input minus extended selection bits.

pub fn scalen( &mut self ) -> BitWriterRaw<'_, u32, COMP1_CSR_SPEC, SCALEN_A, BitM, 23>

Bit 23 - Voltage scaler enable bit

pub fn brgen( &mut self ) -> BitWriterRaw<'_, u32, COMP1_CSR_SPEC, BRGEN_A, BitM, 22>

Bit 22 - Scaler bridge enable

pub fn blanking( &mut self ) -> FieldWriterRaw<'_, u32, COMP1_CSR_SPEC, u8, BLANKING_A, Unsafe, 3, 18>

Bits 18:20 - Comparator 1 blanking source selection bits

pub fn hyst( &mut self ) -> FieldWriterRaw<'_, u32, COMP1_CSR_SPEC, u8, HYST_A, Safe, 2, 16>

Bits 16:17 - Comparator 1 hysteresis selection bits

pub fn polarity( &mut self ) -> BitWriterRaw<'_, u32, COMP1_CSR_SPEC, POLARITY_A, BitM, 15>

Bit 15 - Comparator 1 polarity selection bit

pub fn inpsel( &mut self ) -> FieldWriterRaw<'_, u32, COMP1_CSR_SPEC, u8, INPSEL_A, Unsafe, 2, 7>

Bits 7:8 - Comparator1 input plus selection bit

pub fn inmsel( &mut self ) -> FieldWriterRaw<'_, u32, COMP1_CSR_SPEC, u8, INMSEL_A, Unsafe, 3, 4>

Bits 4:6 - Comparator 1 input minus selection bits

pub fn pwrmode( &mut self ) -> FieldWriterRaw<'_, u32, COMP1_CSR_SPEC, u8, PWRMODE_A, Safe, 2, 2>

Bits 2:3 - Power Mode of the comparator 1

pub fn en(&mut self) -> BitWriterRaw<'_, u32, COMP1_CSR_SPEC, EN_A, BitM, 0>

Bit 0 - Comparator 1 enable bit

pub unsafe fn bits(&mut self, bits: u32) -> &mut W

Writes raw bits to the register.

Methods from Deref<Target = W<COMP1_CSR_SPEC>>§

pub unsafe fn bits(&mut self, bits: <REG as RegisterSpec>::Ux) -> &mut W<REG>

Writes raw bits to the register.

Trait Implementations§

§

impl Deref for W

§

type Target = W<COMP1_CSR_SPEC>

The resulting type after dereferencing.
§

fn deref(&self) -> &<W as Deref>::Target

Dereferences the value.
§

impl DerefMut for W

§

fn deref_mut(&mut self) -> &mut <W as Deref>::Target

Mutably dereferences the value.
§

impl From<W<COMP1_CSR_SPEC>> for W

§

fn from(writer: W<COMP1_CSR_SPEC>) -> W

Converts to this type from the input type.

Auto Trait Implementations§

§

impl RefUnwindSafe for W

§

impl Send for W

§

impl Sync for W

§

impl Unpin for W

§

impl UnwindSafe for W

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.