Struct stm32wlxx_hal::pac::dma1::ccr3::W

pub struct W(/* private fields */);
Available on crate feature stm32wl5x_cm4 only.
Expand description

Register CCR3 writer

Implementations§

§

impl W

pub fn priv_(&mut self) -> BitWriterRaw<'_, u32, CCR3_SPEC, PRIV_A, BitM, 20>

Bit 20 - rivileged mode

pub fn dsec(&mut self) -> BitWriterRaw<'_, u32, CCR3_SPEC, bool, BitM, 19>

Bit 19 - ecurity of the DMA transfer to the destination

pub fn ssec(&mut self) -> BitWriterRaw<'_, u32, CCR3_SPEC, bool, BitM, 18>

Bit 18 - ecurity of the DMA transfer from the source

pub fn secm(&mut self) -> BitWriterRaw<'_, u32, CCR3_SPEC, bool, BitM, 17>

Bit 17 - ecure mode

pub fn mem2mem( &mut self ) -> BitWriterRaw<'_, u32, CCR3_SPEC, MEM2MEM_A, BitM, 14>

Bit 14 - memory-to-memory mode

pub fn pl( &mut self ) -> FieldWriterRaw<'_, u32, CCR3_SPEC, u8, PL_A, Safe, 2, 12>

Bits 12:13 - priority level

pub fn msize( &mut self ) -> FieldWriterRaw<'_, u32, CCR3_SPEC, u8, MSIZE_A, Unsafe, 2, 10>

Bits 10:11 - memory size

pub fn psize( &mut self ) -> FieldWriterRaw<'_, u32, CCR3_SPEC, u8, PSIZE_A, Unsafe, 2, 8>

Bits 8:9 - peripheral size

pub fn minc(&mut self) -> BitWriterRaw<'_, u32, CCR3_SPEC, MINC_A, BitM, 7>

Bit 7 - memory increment mode

pub fn pinc(&mut self) -> BitWriterRaw<'_, u32, CCR3_SPEC, PINC_A, BitM, 6>

Bit 6 - peripheral increment mode

pub fn circ(&mut self) -> BitWriterRaw<'_, u32, CCR3_SPEC, CIRC_A, BitM, 5>

Bit 5 - circular mode

pub fn dir(&mut self) -> BitWriterRaw<'_, u32, CCR3_SPEC, DIR_A, BitM, 4>

Bit 4 - data transfer direction

pub fn teie(&mut self) -> BitWriterRaw<'_, u32, CCR3_SPEC, TEIE_A, BitM, 3>

Bit 3 - transfer error interrupt enable

pub fn htie(&mut self) -> BitWriterRaw<'_, u32, CCR3_SPEC, HTIE_A, BitM, 2>

Bit 2 - half transfer interrupt enable

pub fn tcie(&mut self) -> BitWriterRaw<'_, u32, CCR3_SPEC, TCIE_A, BitM, 1>

Bit 1 - transfer complete interrupt enable

pub fn en(&mut self) -> BitWriterRaw<'_, u32, CCR3_SPEC, EN_A, BitM, 0>

Bit 0 - channel enable

pub unsafe fn bits(&mut self, bits: u32) -> &mut W

Writes raw bits to the register.

Methods from Deref<Target = W<CCR3_SPEC>>§

pub unsafe fn bits(&mut self, bits: <REG as RegisterSpec>::Ux) -> &mut W<REG>

Writes raw bits to the register.

Trait Implementations§

§

impl Deref for W

§

type Target = W<CCR3_SPEC>

The resulting type after dereferencing.
§

fn deref(&self) -> &<W as Deref>::Target

Dereferences the value.
§

impl DerefMut for W

§

fn deref_mut(&mut self) -> &mut <W as Deref>::Target

Mutably dereferences the value.
§

impl From<W<CCR3_SPEC>> for W

§

fn from(writer: W<CCR3_SPEC>) -> W

Converts to this type from the input type.

Auto Trait Implementations§

§

impl RefUnwindSafe for W

§

impl Send for W

§

impl Sync for W

§

impl Unpin for W

§

impl UnwindSafe for W

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.