Enum stm32wlxx_hal::pac::dmamux::c2cr::DMAREQ_ID_A

#[repr(u8)]
pub enum DMAREQ_ID_A {
    None = 0,
    Dmamux1ReqGen0 = 1,
    Dmamux1ReqGen1 = 2,
    Dmamux1ReqGen2 = 3,
    Dmamux1ReqGen3 = 4,
    Adc = 5,
    DatOut1 = 6,
    Spi1RxDma = 7,
    Spi1TxDma = 8,
    Spi2RxDma = 9,
    Spi2TxDma = 10,
    I2c1RxDma = 11,
    I2c1TxDma = 12,
    I2c2RxDma = 13,
    I2c2TxDma = 14,
    I2c3RxDma = 15,
    I2c3TxDma = 16,
    Usart1RxDma = 17,
    Usart1TxDma = 18,
    Usart2RxDma = 19,
    Usart2TxDma = 20,
    Lpuart1RxDma = 21,
    Lpuart1TxDma = 22,
    Tim1Ch1 = 23,
    Tim1Ch2 = 24,
    Tim1Ch3 = 25,
    Tim1Ch4 = 26,
    Tim1Up = 27,
    Tim1Trig = 28,
    Tim1Com = 29,
    Tim2Ch1 = 30,
    Tim2Ch2 = 31,
    Tim2Ch3 = 32,
    Tim2Ch4 = 33,
    Tim2Up = 34,
    Tim16Ch1 = 35,
    Tim16Up = 36,
    Tim17Ch1 = 37,
    Tim17Up = 38,
    AesIn = 39,
    AesOut = 40,
    SubghzspiRx = 41,
    SubghzspiTx = 42,
}

Available on crate feature stm32wl5x_cm4 only.

DMA request identification

Value on reset: 0

Variants

None = 0

0: No signal selected as request input

Dmamux1ReqGen0 = 1

1: Signal dmamux1_req_gen0 selected as request input

Dmamux1ReqGen1 = 2

2: Signal dmamux1_req_gen1 selected as request input

Dmamux1ReqGen2 = 3

3: Signal dmamux1_req_gen2 selected as request input

Dmamux1ReqGen3 = 4

4: Signal dmamux1_req_gen3 selected as request input

Adc = 5

5: Signal adc1_dma selected as request input

DatOut1 = 6

6: Signal dac_out1_dma selected as request input

Spi1RxDma = 7

7: Signal spi1_rx_dma selected as request input

Spi1TxDma = 8

8: Signal spi1_tx_dma selected as request input

Spi2RxDma = 9

9: Signal spi2_rx_dma selected as request input

Spi2TxDma = 10

10: Signal spi2_tx_dma selected as request input

I2c1RxDma = 11

11: Signal i2c1_rx_dma selected as request input

I2c1TxDma = 12

12: Signal i2c1_tx_dma selected as request input

I2c2RxDma = 13

13: Signal i2c2_rx_dma selected as request input

I2c2TxDma = 14

14: Signal i2c2_tx_dma selected as request input

I2c3RxDma = 15

15: Signal i2c3_rx_dma selected as request input

I2c3TxDma = 16

16: Signal i2c3_tx_dma selected as request input

Usart1RxDma = 17

17: Signal usart1_rx_dma selected as request input

Usart1TxDma = 18

18: Signal usart1_tx_dma selected as request input

Usart2RxDma = 19

19: Signal usart2_rx_dma selected as request input

Usart2TxDma = 20

20: Signal usart2_tx_dma selected as request input

Lpuart1RxDma = 21

21: Signal lpuart1_rx_dma selected as request input

Lpuart1TxDma = 22

22: Signal lpuart1_tx_dma selected as request input

Tim1Ch1 = 23

23: Signal tim1_ch1 selected as request input

Tim1Ch2 = 24

24: Signal tim1_ch2 selected as request input

Tim1Ch3 = 25

25: Signal tim1_ch3 selected as request input

Tim1Ch4 = 26

26: Signal tim1_ch4 selected as request input

Tim1Up = 27

27: Signal tim1_up selected as request input

Tim1Trig = 28

28: Signal tim1_trig selected as request input

Tim1Com = 29

29: Signal tim1_com selected as request input

Tim2Ch1 = 30

30: Signal tim2_ch1 selected as request input

Tim2Ch2 = 31

31: Signal tim2_ch2 selected as request input

Tim2Ch3 = 32

32: Signal tim2_ch3 selected as request input

Tim2Ch4 = 33

33: Signal tim2_ch4 selected as request input

Tim2Up = 34

34: Signal tim2_up selected as request input

Tim16Ch1 = 35

35: Signal tim16_ch1 selected as request input

Tim16Up = 36

36: Signal tim16_up selected as request input

Tim17Ch1 = 37

37: Signal tim17_ch1 selected as request input

Tim17Up = 38

38: Signal tim17_up selected as request input

AesIn = 39

39: Signal aes_in selected as request input

AesOut = 40

40: Signal aes_out selected as request input

SubghzspiRx = 41

41: Signal subghzspi_rx selected as request input

SubghzspiTx = 42

42: Signal subghzspi_tx selected as request input

Trait Implementations

impl Clone for DMAREQ_ID_A

fn clone(&self) -> DMAREQ_ID_A

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for DMAREQ_ID_A

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl PartialEq for DMAREQ_ID_A

fn eq(&self, other: &DMAREQ_ID_A) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for DMAREQ_ID_A

impl StructuralPartialEq for DMAREQ_ID_A