Struct stm32wlxx_hal::pac::spi1::cr2::W

pub struct W(/* private fields */);

Available on crate feature stm32wl5x_cm4 only.

Register CR2 writer

Implementations

impl W

pub fn rxdmaen(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, RXDMAEN_A, BitM, 0>

Bit 0 - Rx buffer DMA enable

pub fn txdmaen(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, TXDMAEN_A, BitM, 1>

Bit 1 - Tx buffer DMA enable

pub fn ssoe(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, SSOE_A, BitM, 2>

Bit 2 - SS output enable

pub fn nssp(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, NSSP_A, BitM, 3>

Bit 3 - NSS pulse management

pub fn frf(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, FRF_A, BitM, 4>

Bit 4 - Frame format

pub fn errie(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, ERRIE_A, BitM, 5>

Bit 5 - Error interrupt enable

pub fn rxneie(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, RXNEIE_A, BitM, 6>

Bit 6 - RX buffer not empty interrupt enable

pub fn txeie(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, TXEIE_A, BitM, 7>

Bit 7 - Tx buffer empty interrupt enable

pub fn ds( &mut self ) -> FieldWriterRaw<'_, u32, CR2_SPEC, u8, DS_A, Unsafe, 4, 8>

Bits 8:11 - Data size

pub fn frxth(&mut self) -> BitWriterRaw<'_, u32, CR2_SPEC, FRXTH_A, BitM, 12>

Bit 12 - FIFO reception threshold

pub fn ldma_rx( &mut self ) -> BitWriterRaw<'_, u32, CR2_SPEC, LDMA_RX_A, BitM, 13>

Bit 13 - Last DMA transfer for reception

pub fn ldma_tx( &mut self ) -> BitWriterRaw<'_, u32, CR2_SPEC, LDMA_TX_A, BitM, 14>

Bit 14 - Last DMA transfer for transmission

pub unsafe fn bits(&mut self, bits: u32) -> &mut W

Writes raw bits to the register.

Methods from Deref<Target = W<CR2_SPEC>>

pub unsafe fn bits(&mut self, bits: <REG as RegisterSpec>::Ux) -> &mut W<REG>

Writes raw bits to the register.

Trait Implementations

impl Deref for W

type Target = W<CR2_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &<W as Deref>::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut <W as Deref>::Target

Mutably dereferences the value.

impl From<W<CR2_SPEC>> for W

fn from(writer: W<CR2_SPEC>) -> W

Converts to this type from the input type.