Struct stm32wlxx_hal::pac::SYST
pub struct SYST { /* private fields */ }stm32wl5x_cm4 only.Expand description
SysTick: System Timer
Implementations§
§impl SYST
impl SYST
pub fn clear_current(&mut self)
pub fn clear_current(&mut self)
Clears current value to 0
After calling clear_current(), the next call to has_wrapped() will return false.
pub fn disable_counter(&mut self)
pub fn disable_counter(&mut self)
Disables counter
pub fn disable_interrupt(&mut self)
pub fn disable_interrupt(&mut self)
Disables SysTick interrupt
pub fn enable_counter(&mut self)
pub fn enable_counter(&mut self)
Enables counter
NOTE The reference manual indicates that:
“The SysTick counter reload and current value are undefined at reset, the correct initialization sequence for the SysTick counter is:
- Program reload value
- Clear current value
- Program Control and Status register“
The sequence translates to self.set_reload(x); self.clear_current(); self.enable_counter()
pub fn enable_interrupt(&mut self)
pub fn enable_interrupt(&mut self)
Enables SysTick interrupt
pub fn get_clock_source(&mut self) -> SystClkSource
pub fn get_clock_source(&mut self) -> SystClkSource
Gets clock source
NOTE This takes &mut self because the read operation is side effectful and can clear the
bit that indicates that the timer has wrapped (cf. SYST.has_wrapped)
pub fn get_current() -> u32
pub fn get_current() -> u32
Gets current value
pub fn get_reload() -> u32
pub fn get_reload() -> u32
Gets reload value
pub fn get_ticks_per_10ms() -> u32
pub fn get_ticks_per_10ms() -> u32
Returns the reload value with which the counter would wrap once per 10 ms
Returns 0 if the value is not known (e.g. because the clock can
change dynamically).
pub fn has_reference_clock() -> bool
pub fn has_reference_clock() -> bool
Checks if an external reference clock is available
pub fn has_wrapped(&mut self) -> bool
pub fn has_wrapped(&mut self) -> bool
Checks if the counter wrapped (underflowed) since the last check
NOTE This takes &mut self because the read operation is side effectful and will clear
the bit of the read register.
pub fn is_counter_enabled(&mut self) -> bool
pub fn is_counter_enabled(&mut self) -> bool
Checks if counter is enabled
NOTE This takes &mut self because the read operation is side effectful and can clear the
bit that indicates that the timer has wrapped (cf. SYST.has_wrapped)
pub fn is_interrupt_enabled(&mut self) -> bool
pub fn is_interrupt_enabled(&mut self) -> bool
Checks if SysTick interrupt is enabled
NOTE This takes &mut self because the read operation is side effectful and can clear the
bit that indicates that the timer has wrapped (cf. SYST.has_wrapped)
pub fn is_precise() -> bool
pub fn is_precise() -> bool
Checks if the calibration value is precise
Returns false if using the reload value returned by
get_ticks_per_10ms() may result in a period significantly deviating
from 10 ms.
pub fn set_clock_source(&mut self, clk_source: SystClkSource)
pub fn set_clock_source(&mut self, clk_source: SystClkSource)
Sets clock source
pub fn set_reload(&mut self, value: u32)
pub fn set_reload(&mut self, value: u32)
Sets reload value
Valid values are between 1 and 0x00ffffff.
NOTE To make the timer wrap every N ticks set the reload value to N - 1